Ionogels: Squeeze flow rheology and ionic conductivity of quasi-solidified nanostructured hybrid materials containing ionic liquids immobilized on halloysite

Ionogels are hybrid ion-conducting materials consisting of ionic liquids stabilized by inorganic or polymer fillers and having good prospects for application in solid-state and flexible electronics and energy storage devices. The work presents the results of studying the rheological properties and ionic conductivity of a series of ionogels based on halloysite nanoclay and bis(trifluoromethylsulfonyl)imide ionic liquids with EMIm⁺, BMIm⁺, BM₂Im⁺, BMPyrr⁺, BMPip⁺ and MOc₃Am⁺ cations and content of the dispersion phase of 43–48%. The obtained values are compared with the analogous characteristics of bulk ionic liquids. It has been established that the IL cation structural characteristics affect the viscoplastic properties of ionogels subjected to uniaxial quasistatic compression (20 °C), ionic conductivity and structural resistance coefficient of an inorganic filler (from ?20 to +80 °C). Additive models of conductivity in binary systems are applied to obtain correlations linking ionic conductivity of ionogels with that of pure ionic liquids.     

Role of C2 methylation and anion type on the physicochemical and thermal properties of imidazolium-based ionic liquids

This study focused on the effects of methylation and different anions (Br^? and Cl^?) on the physicochemical and thermal properties of [C₁₆MIM]X and [C₁₆MMIM]X, belonging to the imidazolium-based ionic liquid (IL) family. The effect of methylation on the transmittance in the fingerprint region of the Fourier transform infrared (FT-IR) spectrum was observed as a blue shift, and a new peak associated with the C-N stretching bond was obtained. In contrast, in the functional group region, the frequency shift was related to the change in the vibrational mode from C2-H-X to C2-methyl-X. In general, methylation resulted in an increase in decomposition temperature, an increase in melting temperature, and a decrease in melting enthalpy, leading to a reduction in entropy. The trends observed for the decomposition temperature, melting temperature, and melting enthalpy with different anions depended on the strength of the Brønsted acids and hydrogen bonds of the Br^? and Cl^? based anions. The thermal conductivity of the methylated ILs increased with an increase in temperature. In contrast, for the non-methylated (protonated) ILs, the thermal conductivity of [C₁₆MIM]Br decreased with an increase in temperature, while the opposite trend was observed for [C₁₆MIM]Cl. The data were compared with those of the short alkyl chain and weakly coordinating anion of NTf₂. The analysis was performed considering different phases, the prominent role and different behaviour in the hydrogen bonding at the C2 position of the imidazolium ring upon methylation, and the significant change in viscosity, which can influence the IL structure.     

Structure,thermal conductivity,and thermal stability of bromobutyl rubber nanocomposites with ionic liquid modified graphene oxide

In this report, we demonstrate that both the thermal stability and the thermal conductivity of bromobutyl rubber (BIIR) nanocomposites could be improved by incorporating the ionic liquids (ILs) modified graphene oxide (GO-ILs) using a solution compounding method. The structure, thermal stability and thermal conductivity of this newly modified BIIR nanocomposites were systematically analyzed and studied. The X-ray diffraction (XRD) analysis of GO-ILs showed that ILs had been effectively intercalated into the interlayer of GO, which was found to be able to raise the exfoliation degree of GO. The increased exfoliation degree facilitated a good dispersion of GO-ILs in the BIIR matrix, as revealed by the scanning electron microscope (SEM) images. The glass transition temperatures (T_g) of the GO-ILs/BIIR nanocomposites were also raised by the addition of GO-ILs, which indicates the strong interfacial adhesion between GO-ILs and the rubber. Most importantly, the incorporation of GO-ILs in the BIIR matrix could effectively improve the thermal stability of the rubber nanocomposites according to our thermogravimetric analysis (TGA). The activation energy (E_a) of thermal decomposition of GO-ILs/BIIR nanocomposites increases with the addition of GO-ILs. Besides, the thermal conductivity of GO-ILs/BIIR nanocomposite with 4 wt% of GO-ILs had 1.3-fold improvement compared to that of unfilled BIIR.     

Transport properties of protic ionic liquids,pure and in aqueous solutions: Effects of the anion and cation structure

Ionic conductivities of twelve protic ionic liquids (PILs) and their mixtures with water over the whole composition range are reported at 298.15 K and atmospheric pressure. The selected PILs are the pyrrolidinium-based PILs containing nitrate, acetate or formate anions; the formate-based PILs containing diisopropylethylammonium, amilaminium, quinolinium, lutidinium or collidinium cations; and the pyrrolidinium alkylcarboxylates, [Pyrr][C_nH_2n+1COO] with n = 5–8. This study was performed in order to investigate the influence of molecular structures of the ions on the ionic conductivities in aqueous solutions. The ionic conductivities of the aqueous solutions are 2–30 times higher than the conductivities of pure PILs. The maximum in conductivity varies from ww=0.41 ??to ??0.74$w_w=0.41\text{\hspace{0.17em}??}\text{to}\text{\hspace{0.17em}??}0.74$ and is related to the nature of cations and anions. The molar conductance and the molar conductance at infinite dilution for (PIL + water) solutions are then determined. Self-diffusion coefficients of the twelve protic ionic liquids in water at infinite dilution and at 298.15 K are calculated by using the Nernst–Haskell, the original and the modified Wilke–Chang equations. These calculations show that similar values are obtained using the modified Wilke–Chang and the Nernst–Haskell equations. Finally, the effective hydrodynamic (or Stokes) radius of the PILs was determined by using the Stokes–Einstein equation. A linear relationship was established in order to predict this radius as a function of the anion alkyl chain length in the case of the pyrrolidinium alkylcarboxylates PILs.     

The physicochemical properties of some imidazolium-based ionic liquids and their binary mixtures

The density, viscosity and conductivity of ionic liquids (ILs), 1-octyl-3-methylimidazolium tetrafluoroborate ([omim][BF4]), 1-octyl-3-methylimidazolium chloride ([omim][Cl]), 1-hexyl-3-methylimidazolium tetrafluoroborate ([hmim] BF4]), 1-hexyl- 3-methylimidazolium chloride ([hmim][Cl]), 1-hexyl-3-methylimidazolium hexafluorophosphate ([hmim][PF6]), and the [omim][BF4] + [omim][Cl], [hmim][BF4] + [hmim][Cl], and [hmim][PF6] + [hmim][Cl] binary mixtures were studied at dif- ferent temperatures. It was demonstrated that the densities of both the neat ILs and their mixtures varied linearly with temper- ature. The density sensitivity of a binary mixture is between those of the two components. The excess molar volumes (VE) of [hmim][BF4] + [hmim][Cl] and [hmim][PF6] + [hmim][Cl] mixtures are positive in the whole composition range. For [omim][BF4] + [omim][Cl], the VE is also positive in the [omim][Cl]-rich region, but is negative in the [omim][BF4]-rich re- gion. The viscosity or conductivity of a mixture is in the intermediate of those of the two neat ILs. For all the neat ILs and the binary mixtures studied, the order of conductivity is opposite to that of the viscosity. The Vogel-Tammann-Fulcher (VTF) equations can be used to fit the viscosity and conductivity of all the neat ILs and the binary mixtures. The neat ILs and their mixtures obey the Fractional Walden Rule very well, and the values of the Walden slopes are all smaller than unit, indicating obvious ion associations in the neat ILs and the binary mixtures.     

Thermal and flammability properties of polyethersulfone/halloysite nanocomposites prepared by melt compounding

This paper presents a study of polyethersulfone (PES)/halloysite nanotube (HNTs) nanocomposites prepared by melt compounding either through a simple extrusion process or via a water-assisted extrusion procedure. Scanning and transmission electron microscopy techniques are combined with rheological measurements to assess the influence of polymer end groups (–Cl or –OH) and water injection on the HNTs dispersion state. A morphological transition form microcomposite to nanocomposite is achieved when replacing –Cl chain ends of PES by –OH groups, especially when water is injected during processing. By a combination of Soxhlet extraction and thermogravimetric analysis, we show that some PES(OH) chains are covalently bonded onto the aluminosilicate surface during extrusion. A mechanism describing the physico-chemical action of water is presented. The best system in terms of clay dispersion has been retained to characterize PES-HNTs nanocomposites with respect to their thermo-mechanical, thermal and fire (mass loss calorimetry and UL-94) properties. Dynamic mechanical analysis shows a significant enhancement in the storage modulus of halloysite-based nanocomposites when compared to the unfilled matrix. The improved thermal and thermo-oxidative stability of PES in presence of HNTs is mainly attributed to the labyrinth effect provided by individually dispersed nanotubes, which is reinforced during the decomposition process by the formation of a protective charred ceramic surface layer. The mechanism of action of HNTs for fire retardancy of PES presumably arises from a synergistic effect between physical (i.e. ceramic-like structure formation and mechanical reinforcement of the intumescent char) and chemical (i.e. charring promotion) processes taking place in the condensed phase. According to this study, the straightforward and cost-effective melt compounding route could pave the way for future development of high-performance nanoscale polymeric materials combining enhanced thermal properties and excellent flame retardant behaviour.     

Thermophysical properties and thermodynamic phase behavior of ionic liquids

The thermal stability of many tested ionic liquids (ILs) was investigated by the TGA and DTA curves over the wide temperature range from 200 to 780 K. The TGA curves have mainly a sigmoid shape, which can be split into three segments. The thermal decomposition of the samples was higher than 500 K. For the ammonium salts, C₂BF₄, or C₂PF₆, or C₂N(CN)₂, or C₄Br, the temperatures of the decompositions were 583.5, 556.1, 545.1 and 525.3 K, respectively. Generally, it was found that the temperature of decomposition of investigated ionic liquid is strongly depended on the type of cation and the anion. Phase equilibria and thermophysical constants were measured also for the dialkoxy-imidazolium ILs, [(C₄H₉OCH₂)₂IM][BF₄], [(C₈H₁₇OCH₂)₂IM][Tf₂N], [(C₁₀H₂₁OCH₂)₂IM][Tf₂N] and for pyridinium IL, [Pyr][BF₄].The characterization and purity of the compounds were obtained by the elemental analysis, water content (Fisher method) and differential scanning microcalorimetry (DSC) analysis. From (DSC) method, the melting points, the enthalpies of fusion, the temperatures and enthalpies of solid-solid phase transitions and the half C_p temperatures of glass transition of all investigated ionic liquids were measured.The phase equilibria of these salts with common popular solvents: water, or alcohols or n-alkanes, or aromatic hydrocarbons have been measured by a dynamic method from 290 K to the melting point of IL, or to the boiling point of the solvent in the whole mole fraction range, x from 0 to 1.These salts mainly exhibit simple eutectic systems with immiscibility in the liquid phase with upper critical solution temperatures (UCST), not only with aromatic hydrocarbons, cycloalkanes and n-alkanes but also with longer chain alcohols. For example the C₂BF₄ salt show simple eutectic system with water and simple eutectic systems with immiscibility in the liquid phase with upper critical solution temperature with alcohols.The solid-liquid phase equilibria, SLE curves were correlated by means of the different G^Ex models utilizing parameters derived from the SLE. The root-mean-square deviations of the solubility temperatures for all calculated data depend on the particular system and the equation used.     

Evaluating the solvation properties of functionalized ionic liquids with varied cation/anion composition using the solvation parameter model

Ionic liquids (ILs) are promising gas chromatography (GC) stationary phases due to their high thermal stability, negligible vapor pressure, and ability to solvate a broad range of analytes. The tunability of ILs allows for structure modification in pursuit of enhanced separation selectivity and control of analyte elution order. In this study, the solvation parameter model is used to characterize the solvation interactions of fifteen ILs containing various cationic functional groups (i.e., dimethylamino, hydroxyl, and ether) and cation types paired with various counter anions, namely, tris(pentafluoroethyl)trifluorophosphate (FAP(-)), bis[(trifluoromethyl)sulfonyl]imide (NTf(2)(-)), thiocyanate (SCN(-)), tricyanomethide (C(CN)(3)(-)), tetracyanoborate (B(CN)(4)(-)), and bis[oxalate(2-)]borate (BOB(-)). The presence of functional groups affected the hydrogen bond basicity, hydrogen bond acidity, as well as dispersion interactions of the resulting ILs, while the change of cation type yielded modest influence on the dipolarity. The switch of counter anions in unfunctionalized ILs produced compounds with higher dipolarity and hydrogen bond basicity. The dipolarity and hydrogen bond basicity of ILs possessing cyano-containing anions appeared to be inversely proportional to the cyano content of the anion. The modification of IL structure resulted in a significant effect on the retention behavior as well as separation selectivity for many solutes, including reversed elution orders of some analytes. This study provides one of the most comprehensive examinations up-to-date on the relation between IL structure and the resulting solvation characteristics and gives tremendous insight into choosing suitable ILs as GC stationary phases for solute specific separations.     

Trace determination of organophosphate esters in environmental water samples with an ionogel‐based nanoconfined ionic liquid fiber coating for solid‐phase microextraction with gas chromatography and flame photometric detection

Organophosphate esters, widely used as flame retardants and plasticizers, are regarded as a class of emerging pollutants. In this work, a novel approach was developed for the fabrication of a solid‐phase microextraction fiber by using hybrid silica‐based materials with immobilized ionic liquids with sol–gel technology, and the prepared solid‐phase microextraction fiber was then coupled with gas chromatography and flame photometric detection for the analysis of six organophosphate esters. The high loading of 1‐hexadecyl‐3‐methylimidazolium bis(trifluoromethylsulfonyl)imide was confined within the hybrid network. The developed solid‐phase microextraction fiber possesses a coating thickness of ～35 μm with good thermal stability and long lifetime. The parameters affecting the extraction efficiency such as extraction time, temperature, pH, and ionic strength of the sample solution were optimized. Under the optimized conditions, the limits of detection were in the range of 0.04?0.95 μg L^?1, and the precision of the method assessed with repeatability and reproducibility of (RSD%) ?13 and ?29%, respectively. The proposed method was successfully applied to determine the six organophosphate esters in three real water samples, with recoveries in the range of 64.8?125.4% at two different spiking concentration levels. As a result, the proposed method demonstrated its potential for application in trace determination of organophosphate esters in actual water samples.     

Influence of ionic liquid content on properties of dense polymer membranes

Pervaporation was used for removal of butan-1-ol from its 5 wt.% of aqueous solution, at which the concentration of Clostridium acetobutylicum starts to decrease. The polydimethylsiloxane (PDMS) membrane containing 0, 10, 20 or 30 wt.% of benzyl-3-butylimidazolium tetrafluoroborate ([BBIM][BF₄]) ionic liquid was used. Differential scanning calorimetry measurements showed that PDMS-[BBIM][BF₄] membranes (though optically homogeneous) contained PDMS and [BBIM][BF₄] phases. Pervaporation selectivity increased and total flux through membranes raised moderately with an increased content of [BBIM][BF₄] in PDMS-[BBIM][BF₄] membranes. Hence, immobilization of a proper ionic liquid in a membrane results in the creation of pervaporation membranes, effective in the removal of alcohol from fermentation broths.     

Tube-like natural halloysite/fluoroelastomer nanocomposites with simultaneous enhanced mechanical, dynamic mechanical and thermal properties

A novel kind of fluoroelastomer nanocomposites based on tube-like halloysite clay mineral were successfully prepared using a bis-phenol curing system, which resulted in prominent improvements in mechanical and dynamic mechanical properties and in the elevation as high as 30 K of the thermal decomposition temperature. Wide-angle X-ray scattering and transmission electron microscopy techniques were employed to assess the morphology developed in the nanocomposites, while stress strain diagrams were used to evaluate the mechanical properties. These nanocomposites were further characterized by moving die rheometer, dynamic mechanical properties and thermo-gravimetric analysis. Structure-properties relationship and the improvement of the mechanical, dynamic mechanical and thermal properties of fluoroelastomers are reported in the present study. Increasing amount of the filler reduced the curing efficiency of the bis-phenol curing system, which was evident from the rheometric and physical properties of the resulting composites. A sort of filler–filler interaction was perceived during the strain sweep analysis of the composites. The polymer–filler interaction was reflected in the improved mechanical and thermal properties which were the consequence of proper dispersion of the nanotubes in the polymer matrix; whereas the intercalation of macromolecular chains into the nanotubes was not reflected in the X-ray diffraction analysis.     

Design and synthesis of novel ionic liquid/liquid crystals (ILCs) with axial chirality

As the first examples of axially chiral ionic liquids, new pyridinium salts having a 1,3-dioxan ring in their central core were synthesized. Enantioselective dehydrohalogenation using chiral alkoxides provided a simple and practical approach for their synthesis. Some structures exhibit both low melting point and liquid crystalline behaviour.     

Cordierite-based refractory ceramics from natural halloysite and peridotite: Insights on technological properties

Cordierite-based ceramics were fabricated from Moroccan natural halloysite clay by using a simple and low-cost manufacturing method. To this end, peridotite and halloysite samples, collected from Beni Bousera and Melilla sites, Morocco, were used as raw materials for ceramics manufacturing. A starting mixture was prepared (76.08 wt% of clay and 23.92 wt% of peridotite), molded and heated to the desired temperature (1250, 1300 and 1350 °C) to fabricate cordierite ceramic specimens. Both raw materials (peridotite and halloysite) and final ceramics were analyzed using routine characterization techniques including chemical analysis by XRF, mineralogical analysis by XRD, thermogravimetric analysis, and morphological characteristics using scanning electron microscopy (SEM). The prepared ceramics were investigated regarding their mineralogical composition, thermal and technological properties, chemical resistance, and microstructural characteristics. Our results indicated that peridotite sample is mainly composed of silica (40.25 wt%) and magnesia (38.05 wt%) while halloysite is consisted essentially of silica (38.00 wt%) and alumina (34.13 wt%). This was confirmed by XRD, TG-DTA and FTIR analyses. The prepared ceramic specimens at different sintering temperatures (i.e., 1250, 1300 and 1350 °C) have regular cylindrical forms, displaying good ceramic properties. This is consolidated with the main technological tests including porosity (4.56–3.11%), bulk density (2.45–2.78 g/cm³), shrinkage (6.51–10.31%), indirect tensile strength (20.35–27.60 MPa), and low linear thermal expansion coefficient (3.05–2.18 × 10^?6/°C). Cordierite specimen prepared at 1350 °C provided the best ceramic sample with the highest technological properties, good chemical resistance and thermal properties. Thus, naturally abundant halloysite and peridotite deposits are potential candidates for cordierite-based ceramic manufacture. Therefore, the achieved results have provided cost-effective ceramic bricks with physical, thermal and mechanical properties that are favorable to be used as refractory bricks.     

A green and novel procedure for the preparation of ionic liquid

A green and novel procedure is described for the preparation of a series of ionic liquid containing alkylimidazolium-based or N-alkylpyridinium-based cations and hexafluorophosphate-based or tetrafluoroborate-based anions in one-pot solvent-free conditions to give excellent yields with shortened time.     

The effect of halloysite nanotubes and N,N'- ethylenebis (stearamide) on the properties of polylactide nanocomposites with amorphous matrix

Amorphous polylactide/halloysite nanotube (PLA/HNT) nanocomposites were prepared and examined. Neat HNT and HNT treated with N,N'- ethylenebis(stearamide) (EBS) were used as nanofillers. The role of HNT and/or EBS content on the cold crystallization of amorphous PLA matrix, HNT dispersion, as well as on the dynamic mechanical and optical properties of the materials was determined.The PLA/HNT-based nanocomposites contained well-distributed nanotubes and occasionally micron-sized aggregates, especially at high loading. HNT, EBS treated HNT and EBS influenced the cold crystallization of PLA, therefore the formation of the disorder α′ and the order α crystallographic forms of PLA.The nanocomposites exhibited increased stiffness and decreased transparency compared to the neat PLA. Due to the reinforcing effect and additional specific features of HNT, the addition of the nanofiller allows tuning of the properties of the nanocomposites with amorphous PLA matrix.     

Characterisation and properties of new ionic liquids with the difluoromono[1,2-oxalato(2-)-O,O′]borate anion

Three ionic liquids with borate anions of low symmetry, tetraethylammonium difluoromono[1,2-oxalato(2-)-O,O′]borate, 1-ethyl-3-methylimidazolium difluoromono[1,2-oxalato(2-)-O,O′]borate, and 1-butyl-3-methylimidazolium difluoromono[1,2-oxalato(2-)-O,O′]borate were synthesised and characterised by physicochemical and electrochemical measurements including thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), cyclic voltammetry (CV), viscosity and conductivity measurements.     

Measurements and equation-of-state modelling of thermodynamic properties of binary mixtures of 1-butyl-1-methylpyrrolidinium tetracyanoborate ionic liquid with molecular compounds

This paper presents a comprehensive thermodynamic study of binary mixtures formed by 1-butyl-1-methylpyrrolidinium tetracyanoborate ionic liquid and hydrocarbons (n-heptane, benzene, toluene, ethylbenzene), thiophene and alcohols (methanol, ethanol, 1-propanol, 1-butanol, 1-hexanol, 1-octanol, 1-decanol and 1-dodecanol). An impact of chemical structure of molecular compounds on their solubility in the ionic liquid and excess enthalpies of mixing is discussed. Furthermore, modelling of the measured properties by using perturbed-chain statistical associating fluid theory (PC-SAFT) is presented. The theory is applied in both correlative and semi-predictive mode involving temperature-dependent binary corrections fitted to infinite dilution activity coefficients. Solubility curves and excess enthalpies are captured by the model with a reasonable accuracy, when semi-predictive strategy is adopted. Moreover, (liquid + liquid) equilibrium phase diagram in ternary system composed of the investigated ionic liquid, thiophene and n-heptane is predicted with PC-SAFT and then the calculations are confronted with available experimental data. The results indicate that the approach proposed can be perceived as an interesting tool for reproducing the thermodynamic behaviour disclosed by such complex systems as those based on ionic liquids.     

Tuning the physicochemical properties of diverse phenolic ionic liquids for equimolar CO2 capture by the substituent on the anion

Phenolic ionic liquids for the efficient and reversible capture of CO(2) were designed and prepared from phosphonium hydroxide and substituted phenols. The electron-withdrawing or electron-donating ability, position, and number of the substituents on the anion of these ionic liquids were correlated with the physicochemical properties of the ionic liquids. The results show that the stability, viscosity, and CO(2)-capturing ability of these ionic liquids were significantly affected by the substituents. Furthermore, the relationship between the decomposition temperature, the CO(2)-absorption capacity, and the basicity of these ionic liquids was quantitatively correlated and further rationalized by theoretical calculation. Indeed, these ionic liquids showed good stability, high absorption capacity, and low absorption enthalpy for CO(2) capture. This method, which tunes the physicochemical properties by making use of substituent effects in the anion of the ionic liquid, is important for the design of highly efficient and reversible methods for CO(2)-capture. This CO(2) capture process using diverse phenolic ionic liquids is a promising potential method for CO(2) absorption with both high absorption capacity and good reversibility.     

Alkylation of the 2-hydroxypyridine anion in ionic liquid media

The alkylation reaction of the ambident 2-hydroxypyridine anion was examined in ionic liquid media. Ionic liquids increase the alkylation reaction rate in comparison with molecular liquids, as well as the level of impact on the reaction rates of the counter ion and/or additives, and the distribution of isomers of the reaction products in trans-formations of the ambident 2-hydroxypyridine anion. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 699–710, May, 2008.