Synthesis of Non-precious N-doped Mesoporous Fe3O4/CoO@NC Materials towards Efficient Oxygen Reduction Reaction for Microbial Fuel Cells

N-doped transition metal oxides are strategic materials towards the efficient oxygen reduction reaction (ORR) of microbial fuel cells (MFCs). Non-precious N-doped Fe₃O₄/CoO@NC−T (T represents carbonization temperature) catalysts are prepared by an efficient two-step strategy for ORR. Fe₃O₄/CoO@NC-750 exhibits the best performance with an efficient four-electron transfer pathway. The optimal power density of MFCs by using Fe₃O₄/CoO@NC-750 as the cathode catalyst (1243.4 mW ⋅ m⁻²) is superior to that of the MFCs with commercial Pt/C catalyst (1080 mW ⋅ m⁻²), which shows an outstanding activity towards ORR. No significant decrease in output voltage results over 70 days, which shows an excellent electrochemical stability.     

Construction of Co4 Atomic Clusters to Enable Fe−N4 Motifs with Highly Active and Durable Oxygen Reduction Performance

Fe−N−C catalysts with single-atom Fe−N₄ configurations are highly needed owing to the high activity for oxygen reduction reaction (ORR). However, the limited intrinsic activity and dissatisfactory durability have significantly restrained the practical application of proton-exchange membrane fuel cells (PEMFCs). Here, we demonstrate that constructing adjacent metal atomic clusters (ACs) is effective in boosting the ORR performance and stability of Fe−N₄ catalysts. The integration of Fe−N₄ configurations with highly uniform Co₄ ACs on the N-doped carbon substrate (Co₄@/Fe₁@NC) is realized through a “pre-constrained” strategy using Co₄ molecular clusters and Fe(acac)₃ implanted carbon precursors. The as-developed Co₄@/Fe₁@NC catalyst exhibits excellent ORR activity with a half-wave potential (E_1/2) of 0.835 V vs. RHE in acidic media and a high peak power density of 840 mW cm⁻² in a H₂−O₂ fuel cell test. First-principles calculations further clarify the ORR catalytic mechanism on the identified Fe−N₄ that modified with Co₄ ACs. This work provides a viable strategy for precisely establishing atomically dispersed polymetallic centers catalysts for efficient energy-related catalysis.     

Preparation and mechanism of Fe3O4/Au core/shell super-paramagnetic microspheres

In the presence of Fe₃O₄ nano-particles, a new type of super-paramagnetic Fe₃O₄/Au microspheres with core/shell structures was prepared by reduction of Au³⁺ with hydroxylamine. The formation mechanism of the core/shell microspheres was studied in some detail. It was shown that the formation of the complex microspheres can be divided into two periods, that is, surface reaction-controlled process and diffusion-controlled process. The relative time lasted by either process depends upon the amount of Fe₃O₄ added and the initial concentration of Au³⁺. XPS analysis revealed that along with increasing in coating amount, the strength of the characteristic peaks of Au increased, and the Auger peaks of Fe weakened and even disappeared. Size distribution analysis showed that the core/shell microspheres are of an average diameter of 180 nm, a little bit larger than those before coating.     

CNx-modified Fe3O4 as Pt nanoparticle support for the oxygen reduction reaction

A novel electrocatalyst support material, nitrogen-doped carbon (CN_x)-modified Fe₃O₄ (Fe₃O₄-CN_x), was synthesized through carbonizing a polypyrrole-Fe₃O₄ hybridized precursor. Subsequently, Fe₃O₄-CN_x-supported Pt (Pt/Fe₃O₄-CN_x) nanocomposites were prepared by reducing Pt precursor in ethylene glycol solution and evaluated for the oxygen reduction reaction (ORR). The Pt/Fe₃O₄-CN_x catalysts were characterized by X-ray diffraction, Raman spectra, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy. The electrocatalytic activity and stability of the as-prepared electrocatalysts toward ORR were studied by cyclic voltammetry and steady-state polarization measurements. The results showed that Pt/Fe₃O₄-CN_x catalysts exhibited superior catalytic performance for ORR to the conventional Pt/C and Pt/C-CN_x catalysts.     

Preparation and mechanism of Fe3O4/Au core/shell super-paramagnetic microspheres

In the presence of Fe₃O₄ nano-particles, a new type of super-paramagnetic Fe₃O₄/Au microspheres with core/shell structures was prepared by reduction of Au³⁺ with hydroxylamine. The formation mechanism of the core/shell microspheres was studied in some detail. It was shown that the formation of the complex microspheres can be divided into two periods, that is, surface reaction-controlled process and diffusion-controlled process. The relative time lasted by either process depends upon the amount of Fe₃O₄ added and the initial concentration of Au³⁺. XPS analysis revealed that along with increasing in coating amount, the strength of the characteristic peaks of Au increased, and the Auger peaks of Fe weakened and even disappeared. Size distribution analysis showed that the core/shell microspheres are of an average diameter of 180 nm, a little bit larger than those before coating.     

The impact on the magnetic field growth of half-metallic Fe3O4 thin films

Half-metallic Fe₃O₄ films grown on a Si (100) substrate with a tantalum (Ta) buffer layer were prepared by DC magnetron reactive sputtering. Primary emphasis was placed on magnetic field growth of Fe₃O₄ thin film. The experiment's results showed that applying an external magnetic field to the samples during the growth was efficient to promote the polycrystalline Fe₃O₄ growth along certain directions. The magnetoresistance (MR) was also tested for comparison of the samples prepared with and without an external magnetic field, and showed that applying an external magnetic field can promote the MR values.     

Fabrication,characterization and X-band microwave absorption properties of PAni/Fe3O4/PVA nanofiber composites materials

This work presents a study of microwave absorption properties of PAni/Fe₃O₄/PVA nanofiber composites with different ratio of Fe₃O₄ nanoparticles. The morphology of the composites nanofibers study by Field Emission Scanning Electron Microscopes (FESEM) and Transmission Electron Microscope (TEM) showed that the low content of Fe₃O₄ nanoparticles presence in the composites nanofibers indicates very much uniform surface, in the composites nanofiber without many bends, but some bends develop at higher content of Fe₃O₄ nanoparticles as indicated in the TEM image. Image-J software was used to further investigate the diameter of the composites nanofiber and found to be in the range of 152 to 195 nm. The nanofiber composites show excellent electric and magnetic properties and therefore vary with the addition of Fe₃O₄ nanoparticles in the composites nanofiber. In addition the PAni/Fe₃O₄/PVA composites nanofibers were further characterized by X-ray diffraction spectra (XRD) and Four Transformation infrared spectra (FTIR). The XRD pattern shows the presence of PAni nanotubes containing Fe₃O₄ nanoparticles by indicating peaks at 23.4⁰ and 35.43⁰ which was further supported by FTIR analysis. Microwave vector network analyzers (MVNA) were used to estimate the microwave absorption properties of the composites nanofibers. The absorption parameters was found to be −6.4 dB at 12.9 GHz within the range of X-band microwave absorption frequency, this reflection loss is attributed to the multiple absorption mechanisms as a result of the improved of impedance matching between dielectric and magnetic loss of the absorbent materials demonstrating that these materials can be used as protective material for electromagnetic radiation.     

NiCo2O4/MXene Hybrid as an Efficient Bifunctional Electrocatalyst for Oxygen Evolution and Reduction Reaction

For the advancement of electrochemical energy conversion and storage technologies, bifunctional electrocatalysts are crucial for efficiently driving both the oxygen evolution (OER) and reduction reactions (ORR). Cobalt-based spinel oxides are a class of promising bifunctional electrocatalysts. However their low electrical conductivity and stability may hinder further improvement. A novel composite material composed of NiCo₂O₄ nanoparticles integrated with emerging two dimensional MXene nanosheets (NiCo₂O₄/MXene) was developed. The successful integration of NiCo₂O₄ with MXene brings about a number of attractive structural features. This includes synergistic effects between NiCo₂O₄ and MXene, highly accessible surface areas, complete exposure of numerous active sites, and excellent electronic conductivity, all of which collectively contribute to the desirability of composite material for OER and ORR. The synthesized NiCo₂O₄/MXene composite showed extraordinary OER electrocatalytic activity with a lower overpotential of 360 mV at a current density of 10 mA/cm², and a small Tafel slope of 64 mV/dec compared to NiCo₂O₄, MXene and NiCo₂O₄+MXene (physically mixed). Additionally, NiCo₂O₄/MXene displays an ORR limiting current density of −4 mA/cm² and exhibited highest onset potential and half wave potential of 0.92 V and 0.72 V vs. RHE, respectively, for the ORR in alkaline media compared to NiCo₂O₄, MXene and NiCo₂O₄+MXene (physically mixed).     

Iron (III) nanocomposites for enzyme-less biomimetic cathode: A promising material for use in biofuel cells

In this paper, we discuss the synthesis and electrochemical properties of a new material based on iron oxide nanoparticles stabilized with poly(diallyldimethylammonium chloride) (PDAC); this material can be used as a biomimetic cathode material for the reduction of H₂O₂ in biofuel cells. A metastable phase of iron oxide and iron hydroxide nanoparticles (PDAC–FeOOH/Fe₂O₃-NPs) was synthesized through a single procedure. On the basis of the Stokes–Einstein equation, colloidal particles (diameter: 20 nm) diffused at a considerably slow rate (D = 0.9 × 10^? 11 m s^? 1) as compared to conventional molecular redox systems. The quasi-reversible electrochemical process was attributed to the oxidation and reduction of Fe³⁺/Fe²⁺ from PDAC–FeOOH/Fe₂O₃-NPs; in a manner similar to redox enzymes, it acted as a pseudo-prosthetic group. Further, PDAC–FeOOH/Fe₂O₃-NPs was observed to have high electrocatalytic activity for H₂O₂ reduction along with a significant overpotential shift, ΔE = 0.68 V from ? 0.29 to 0.39 V, in the presence and absence of PDAC–FeOOH/Fe₂O₃-NPs. The abovementioned iron oxide nanoparticles are very promising as candidates for further research on biomimetic biofuel cells, suggesting two applications: the preparation of modified electrodes for direct use as cathodes and use as a supporting electrolyte together with H₂O₂.     

Oxygen reduction behavior of RuO2/Ti,IrO2/Ti and IrM (M: Ru,Mo, W,V) Ox/Ti binary oxide electrodes in a sulfuric acid solution

Some oxide catalysts, such as RuO₂/Ti, IrO₂/Ti and IrM(M: Ru, Mo, W, V)O_x/Ti binary oxide electrodes, were prepared by using a dip-coating method on a Ti substrate. Their catalytic behavior for the oxygen reduction reaction (ORR) was evaluated by cyclic voltammetry in 0.5 M H₂SO₄ at 60 °C. These catalysts were found to exhibit considerably high activity, and the most active one among them was Ir_0.6V_0.4O₂/Ti prepared at 450 °C, showing onset potential for the ORR at about 0.86 V–0.90 (vs RHE).     

One-Step Preparation of Fe/N/C Single-Atom Catalysts Containing Fe−N4 Sites from an Iron Complex Precursor with 5,6,7,8-Tetraphenyl-1,12-Diazatriphenylene Ligands

Fe/N/C single-atom catalysts containing Fe−N_x sites prepared by pyrolysis are promising cathode materials for fuel cells and metal-air batteries due to their high oxygen reduction reaction (ORR) activities. We have developed iron complexes containing N2- or N3-chelating coordination structures with preorganized aromatic rings in a 1,12-diazatriphenylene framework tethering bromo substituents as precursors to precisely construct Fe−N₄ sites in an Fe/N/C catalyst. One-step pyrolysis of the iron complex with carbon black forms atomically dispersed Fe−N₄ sites without iron aggregates. X-ray absorption spectroscopy (XAS) and electrochemical measurements revealed that the iron complex with N3-coordination is more effectively converted to Fe−N₄ sites catalyzing ORR with a TOF value of 0.21 e site⁻¹ s⁻¹ at 0.8 V vs. RHE. This indicates that the formation of Fe−N₄ sites is controlled by precise tuning of the chemical structure of the iron complex precursor.     

The self-assembly, characterization and application of hemoglobin immobilized on Fe3O4@Pt core-shell nanoparticles

Direct electron transfer is demonstrated to occur between an electrode and hemoglobin that was immobilized on a film of Fe₃O₄@Pt-chitosan (Fe₃O₄@Pt-CS). Magnetic nanoparticles composed of Fe₃O₄ were prepared by a chemical coprecipitation method, and platinum nanoparticles were deposited on the Fe₃O₄ surface to form novel core-shell nanocomposites. In phosphate buffer solution of pH 7.0, the hemoglobin-Fe₃O₄@Pt-CS assembly on a modified glassy carbon electrode exhibited a couple of well-defined and quasi-reversible redox peaks. The formal potential E^0′ was about ?0.35 V. The electrode displayed excellent electrocatalytic activity towards oxygen and hydrogen peroxide reduction without the need for an electron mediator.     

Anchoring Fe Species on the Highly Curved Surface of S and N Co-Doped Carbonaceous Nanosprings for Oxygen Electrocatalysis and a Flexible Zinc-Air Battery

Oxygen reduction reaction (ORR) is of critical significance in the advancement of fuel cells and zinc-air batteries. The iron-nitrogen (Fe−N_x) sites exhibited exceptional reactivity towards ORR. However, the task of designing and controlling the local structure of Fe species for high ORR activity and stability remains a challenge. Herein, we have achieved successful immobilization of Fe species onto the highly curved surface of S, N co-doped carbonaceous nanosprings (denoted as FeNS/Fe₃C@CNS). The induction of this twisted configuration within FeNS/Fe₃C@CNS arose from the assembly of chiral templates. For electrocatalytic ORR tests, FeNS/Fe₃C@CNS exhibits a half-wave potential (E_1/2) of 0.91 V in alkaline medium and a E_1/2 of 0.78 V in acidic medium. The Fe single atoms and Fe₃C nanoparticles are coexistent and play as active centers within FeNS/Fe₃C@CNS. The highly curved surface, coupled with S substitution in the coordination layer, served to reduce the energy barrier for ORR, thereby enhancing the intrinsic catalytic activity of the Fe single-atom sites. We also assembled a wearable flexible Zn-air battery using FeNS/Fe₃C@CNS as electrocatalysts. This work provides new insights into the construction of highly curved surfaces within carbon materials, offering high electrocatalytic efficacy and remarkable performance for flexible energy conversion devices.     

Hexagonal La2O3 Nanocrystals Chemically Coupled with Nitrogen-Doped Porous Carbon as Efficient Catalysts for the Oxygen Reduction Reaction

The construction of nano-scale hybrid materials with a smart interfacial structure, established by using rare earth oxides and carbon as building blocks, is essential for the development of economical and efficient catalysts for oxygen reduction reactions (ORRs). In this work, hexagonal La₂O₃ nanocrystals on a nitrogen-doped porous carbon (NPC) derived from crop radish, served as building bricks, are prepared by chemical precipitation and then calcination at elevated temperatures. The obtained La₂O₃/NPC hybrid exhibits a very high ORR activity with a half-wave potential of 0.90 V, exceeding that of commercial Pt/C (0.83 V). Both DFT theoretical and experimental results have verified that the significantly enhanced catalytic performance is ascribed to the formation of the C−O−La covalent bonds between carbon and La₂O₃. Through the covalent bonds, electrons can transfer from the carbon to La₂O₃ and occupy the unfilled e_g orbital of the La₂O₃ phase. This results in the accelerated adsorption of active oxygen and the facilitated desorption of the surface hydroxides (OH_ad⁻), thereby promoting the ORR over the catalyst.     

Synthesis of Fe3O4/CuO/ZnO/RGO and its catalytic degradation of dye wastewater using dielectric barrier discharge plasma

The design of an efficient and green dye degradation technology is of great significance to mitigate water pollution as well as ecological damage. Fe₃O₄/CuO/ZnO/RGO was prepared by solvothermal synthesis and homogeneous precipitation. X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), transmission electron microscopy (TEM), and vibrating-sample magnetometry (VSM) were used to characterize the samples, to explore the morphology and structural composition of the composites. To enhance the degradation efficiency, a dielectric barrier discharge (DBD)–Fe₃O₄/CuO/ZnO/RGO co-catalytic system was created based on the DBD plasma technology. Response surface methodology analysis results demonstrate that the degradation effect of DBD–Fe₃O₄/CuO/ZnO/RGO is optimal and the decolorization rate is 95.06 % when the solution pH is 3, conductivity is 0.5 mS/cm, the input voltage is 90 V, and Fe₃O₄/CuO/ZnO/RGO concentration is 0.18 g/L. Therefore, this study offers a novel method for dye degradation and confirms the viability of a DBD–Fe₃O₄/CuO/ZnO/RGO synergistic catalytic system.     

Determination of arsenic(III) and arsenic(V) binding to microwave assisted hydrothermal synthetically prepared Fe3O4, Mn3O4, and MnFe2O4 nanoadsorbents

The potential of the Fe₃O₄, Mn₃O₄, and MnFe₂O₄ nanophases for the removal of arsenic(III) and (V) from aqueous solutions was investigated using the batch technique. The structure and grain size of the nanoadsorbents were characterized using XRD and Secherrer's equation. The Fe₃O₄, Mn₃O₄, and MnFe₂O₄ had the crystal structure of magnetite, hausmannite, and Jacobsite, while the grain sizes were 28, 25, and 12 nm, respectively. It was found that the sorption determined using 100 ppb of either As(III) or (V) was pH independent from pH 2 through pH 6. However, at pH below 3 the nanomaterials released high concentrations of iron and manganese into solution. The amount of both As(III) and (V) per gram of adsorbent was found to increase with increasing concentration of As in solution. The XRD analysis showed no decrease in the average grain size of the nanoadsorbents reacted with 1000 ppm of either As(III) or (V) or a combination of 500 ppm of each As species. Finally Fe₃O₄, Mn₃O₄, and MnFe₂O₄ showed binding capacities (µg/g) of 32.2, 8.9, and 718 for As(III) and 1575, 212 and 2125 for As(V), respectively.     

超声法制备Au/Fe3O4及其催化还原4-硝基苯酚性能

通过简易的超声法以及原位还原法成功制备出了负载型可再生Au/Fe₃O₄催化剂。利用3-氨丙基三乙氧基硅烷（APTES）作为有机桥键,将Au固定在Fe₃O₄的表面,得到单分散磁性Au/Fe₃O₄。Au⁰在氨基的作用下不会团聚,因此具有较高的催化活性及稳定性。XRD、HRTEM、EDS和XPS等测试结果表明Au/Fe₃O₄已被成功制备。将其用于催化还原4-硝基苯酚得到4-氨基苯酚,表现出较高的催化活性,速率常数可达0.225 6 min^-1。重复性实验表明该催化剂具有良好的稳定性,反应9个循环之后,催化还原反应的转化率仍可达到94%。     

Importing Antibonding-Orbital Occupancy through Pd−O−Gd Bridge Promotes Electrocatalytic Oxygen Reduction

The active-site density, intrinsic activity, and durability of Pd−based materials for oxygen reduction reaction (ORR) are critical to their application in industrial energy devices. This work constructs a series of carbon-based rare-earth (RE) oxides (Gd₂O₃, Sm₂O₃, Eu₂O₃, and CeO₂) by using RE metal–organic frameworks to tune the ORR performance of the Pd sites through the Pd−RE_xO_y interface interaction. Taking Pd−Gd₂O₃/C as a representative, it is identified that the strong coupling between Pd and Gd₂O₃ induces the formation of the Pd−O−Gd bridge, which triggers charge redistribution of Pd and Gd₂O₃. The screened Pd−Gd₂O₃/C exhibits impressive ORR performance with high onset potential (0.986 V_RHE), half-wave potential (0.877 V_RHE), and excellent stability. Similar ORR results are also found for Pd−Sm₂O₃/C, Pd−Eu₂O₃/C, and Pd−CeO₂/C catalysts. Theoretical analyses reveal that the coupling between Pd and Gd₂O₃ promotes electron transfer through the Pd−O−Gd bridge, which induces the antibonding-orbital occupancy of Pd−*OH for the optimization of *OH adsorption in the rate-determining step of ORR. The pH-dependent microkinetic modeling shows that Pd−Gd₂O₃ is close to the theoretical optimal activity for ORR, outperforming Pt under the same conditions. By its ascendancy in ORR, the Pd−Gd₂O₃/C exhibits superior performance in Zn-air battery as an air cathode, implying its excellent practicability.     

超声法制备Au/Fe_3O_4及其催化还原4-硝基苯酚性能

通过简易的超声法以及原位还原法成功制备出了负载型可再生Au/Fe_3O_4催化剂。利用3-氨丙基三乙氧基硅烷(APTES)作为有机桥键,将Au固定在Fe_3O_4的表面,得到单分散磁性Au/Fe_3O_4。Au0在氨基的作用下不会团聚,因此具有较高的催化活性及稳定性。XRD、HRTEM、EDS和XPS等测试结果表明Au/Fe_3O_4已被成功制备。将其用于催化还原4-硝基苯酚得到4-氨基苯酚,表现出较高的催化活性,速率常数可达0.225 6 min~(-1)。重复性实验表明该催化剂具有良好的稳定性,反应9个循环之后,催化还原反应的转化率仍可达到94%。     

Au nanoparticles grafted on Fe3O4 as effective SERS substrates for label-free detection of the 16 EPA priority polycyclic aromatic hydrocarbons

Several methods and materials have been explored for the sensitive and practicable detection of polycyclic aromatic hydrocarbons (PAHs). However, it is still a challenge to develop simple and cost-effective sensing techniques for PAHs. Herein we report the synthesis and construction of Fe₃O₄@Au SERS substrate. This magnetic substrate was composed by Fe₃O₄ microspheres and Au NPs. The size, morphology, and surface composition of Fe₃O₄@Au were characterized by multiple complimentary techniques including scanning electron microscopy, X-ray photoelectron spectroscopy, and X-ray powder diffraction. The spatial distributions of electro-magnetic field enhancement around Fe₃O₄@Au was calculated using finite difference time domain (FDTD) simulations. As a result of its remarkable sensitivity, the Fe₃O₄@Au-based SERS assay has been applied to detect the 16 EPA priority PAHs. The LODs achieved by our method (100–5 nM, 16.6–1.01 μg L⁻¹) make it promising for the rapid screening of highly contaminated cases. As a proof-of-concept study, the substrate was applied in SERS sensing of PAHs in river matrix. The 16 PAHs could be differentiated based upon their characteristic SERS peaks. Most importantly, the detection was successfully conducted using a portable Raman spectrometer, which could be used for on-site monitoring of PAHs.