Synthesis and characterization of CuFe2O4/NiMgAl-LDH composite for the efficient removal of oxytetracycline antibiotic

In this study, a modified copper ferrite/NiMgAl layered double hydroxide (CuFe₂O₄/NiMgAl-LDH) composite was developed for the adsorptive removal of oxytetracycline hydrochloride (OTC) antibiotic from aqueous solution. Material characterization by X-ray diffraction (XRD), Scanning electron microscopy (SEM), Fourier transforms infrared spectrum (FTIR) and X-ray photoelectron spectroscopy (XPS) confirms that the resultant material composes of a hexagonal layered doubled hydroxide structure with surficial deposits on CuFe₂O₄ cubes. The adsorption of OTC onto the prepared materials were studied as a function of solution pH, initial OTC concentration, reaction time and temperature. The OTC adsorption capacities of the prepared materials were as follows: CuFe₂O₄/NiMgAl-LDH composite > NiMgAl-LDH > CuFe₂O₄. The adsorption of OTC in the presence of salts like CuSO₄, NaHCO₃, NaCl were also studied and the results revealed that CuSO₄ has a positive effect on OTC adsorption while NaHCO₃ and NaCl showed the neutral and antagonistic effect. The results revealed that hydrogen bonding, anionic exchange, and electrostatic forces were mainly involved in the adsorption of OTC onto CuFe₂O₄/NiMgAl-LDH composite. OTC adsorption followed the pseudo-second-order kinetic model while the adsorption equilibrium data were well fitted to the Langmuir isotherm model with the maximum adsorption capacity of 192 mg/g at 323K. Furthermore, the thermodynamic study revealed that the adsorption process was spontaneous and endothermic.     

Preparation of CuFe2O4/SiO2 nanocomposite starting from Cu(II)–Fe(III) carboxylates embedded in hybrid silica gels

Nanocomposites of the type 30 % CuFe₂O₄/70 % SiO₂ were synthesized using the modified sol–gel method starting from tetraethylorthosilicate, metal nitrates (Fe(NO₃)₃·9H₂O, Cu(NO₃)₂·3H₂O) and the diol: 1,3-propane diol. The obtained hybrid gel, which contains within the pores, the metal nitrates and diol, was thermally treated at 140 °C, when the redox reaction between metal nitrates and 1,3-propane diol takes place forming Cu(II)–Fe(III) carboxylate compounds of malonate type. The thermal decomposition of the carboxylates within the gels pores, at ~300 °C, leads to simple or mixed metal oxides, uniformly distributed within the amorphous silica matrix. The spinel system CuFe₂O₄/SiO₂ was obtained starting with 700 °C. The evolution of the spinel phase with the annealing temperature was investigated and resulted that at 1,000 °C, the matrix crystallizes into cristobalite and quartz. The formation of bulk CuFe₂O₄, starting from the same type of Cu(II)–Fe(III) carboxylate compounds was also investigated. A comparison between the thermal evolution of bulk CuFe₂O₄ and CuFe₂O₄/SiO₂ starting from Cu(II)–Fe(III) carboxylate compounds was made. The magnetic behavior of the ferrite nanocrystallites depending on the annealing temperature was also investigated.     

Preparation,characterization and photocatalytic performance of polyoxometalate / polyaniline / titania ternary composite

A new CoW₁₁Mn/PANI/TiO₂ ternary composite was synthesized with K₈[Co(H₂O)MnW₁₁O₃₉] (CoW₁₁Mn) and PANI/TiO₂ by electrostatic self-assembly. These catalysts were characterized using infrared (IR) spectroscopy, X-ray diffraction, scanning electron microscopy, ultraviolet–visible spectroscopy, and N₂ adsorption–desorption. CoW₁₁Mn/PANI/TiO₂ was used to photodegradate the example contaminant, gentian violet (GV). Under the optimum photodegradation conditions, 92.63% degradation was achieved, indicating that the introduction of polyoxometalate and polyaniline greatly enhanced the photocatalytic performance of the catalyst. Moreover, CoW₁₁Mn/PANI/TiO₂ exhibits stable performance with little loss in activity after three successive runs. Thus, CoW₁₁Mn/PANI/TiO₂ ternary composite could be a promising photocatalyst in photodegradation of organic pollutants.     

Detection of acetaminophen using cyclic voltammetry on MnFe2O4/polyaniline

A novel sensing material, MnFe₂O₄/polyaniline (PANI), was fabricated by doping PANI to MnFe₂O₄ on a modified glassy carbon electrode (GCE). This sensing material was characterized using X‐ray diffraction (XRD), scanning electron microscopy (SEM), and high‐resolution transmission electron microscopy (HR‐TEM). Using a cyclic voltammetry electrochemical‐sensing method, we tested MnFe₂O₄/PANI, and an acetaminophen concentration of 0.0625–5 mM was recorded. Furthermore, the sensor responses were 2.05–22.44. The detection limit was 2.23 × 10^?7 M. Strong selectivity was observed for MnFe₂O₄/PANI, which is a possible sensing mechanism.     

Adsorptive Removal of Cd,Cu, Ni and Mn from Environmental Samples Using Fe3O4-Zro2@APS Nanocomposite: Kinetic and Equilibrium Isotherm Studies

In this study, Fe₃O₄-ZrO₂ functionalized with 3-aminopropyltriethoxysilane (Fe₃O₄-ZrO₂@APS) nanocomposite was investigated as a nanoadsorbent for the removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions from aqueous solution and real samples in batch mode systems. The prepared magnetic nanomaterials were characterized using X-ray powder diffraction (XRD), scanning electron microscopy/energy dispersion x-ray (SEM/EDX) Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). Factors (such as adsorbent dose and sample pH) affecting the adsorption behavior of the removal process were studied using the response surface methodology. Under optimized condition, equilibrium data obtained were fitted into the Langmuir and Freundlich isotherms and the data fitted well with Langmuir isotherms. Langmuir adsorption capacities (mg/g) were found to be 113, 111, 128, and 123 mg/g for Cd, Cu, Ni and Mn, respectively. In addition, the adsorption kinetics was analyzed using five kinetic models, pseudo-first order, pseudo-second order, intraparticle diffusion and Boyd models. The adsorbent was successfully applied for removal of Cd(II), Cu(II), Mn (II) and Ni(II) ions in wastewater samples.     

Thiol-functionalized Fe<Subscript>3</Subscript>O<Subscript>4</Subscript>/SiO<Subscript>2</Subscript> microspheres with superparamagnetism and their adsorption properties for Au(III) ion separation

Thiol-functionalized Fe₃O₄/SiO₂ microspheres (Fe₃O₄/SiO₂-SH) with high saturation magnetization (69.3 emu g^–1), superparamagnetism, and good dispersibility have been prepared by an ethylene glycol reduction method in combination with a modified Stöber method. The as-prepared composite magnetic spheres are characterized with fourier transform infrared spectroscopy (FT-IR), zeta potential, X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and superconducting quantum interference magnetometer, and tested in separation of Au(III) ions from aqueous solutions. The data for Au(III) adsorption on Fe₃O₄/SiO₂-SH are analyzed with the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich isotherm models, and the pseudo-first-order, pseudo-second-order, and intraparticle diffusion kinetics models. The adsorption behaviors of Au(III) on Fe₃O₄/SiO₂-SH follow the Langmuir isotherm model, and the adsorption process conforms to the pseudo-second-order kinetic model. The maximum adsorption capacity of Au(III) on Fe₃O₄/SiO₂-SH is 43.7 mg g^–1. Acetate anions play an important role yet Cu(II) ions have little interference in the adsorption of Au(III) on the adsorbent. A satisfactory recovery percentage of 89.5% is acquired by using an eluent with 1 M thiourea and 5% HCl, although thiols have a high affinity to Au(III) ions based on the hard-soft acid-base (HSAB) theory by Pearson.     

Ag/PANI/Fe_2O_3复合纳米粒子的合成与催化性能

借助于PANI的还原性质,PANI/Fe2O3复合载体与AgNO3发生表面氧化还原反应,合成了Ag/PANI/Fe2O3复合纳米粒子。TEM和XRD结果表明,立方晶系纳米银的平均粒径10nm。FTIR结果表明,Ag与PANI及Fe2O3复合载体之间不存在化学键合作用,但由于PANI与Ag之间的电子相互作用,Ag/PANI/Fe2O3复合纳米粒子的FTIR吸收峰发生蓝移。Ag/PANI/Fe2O3复合纳米粒子对于间硝基苯磺酸钠的硼氢化钠还原反应表现出良好的催化活性,30min内间硝基苯磺酸钠的转化率达到86.77%。     

Polyaniline/CoFe2O4 nanocomposite inhibits the growth of Candida albicans 077 by ROS production

In recent years, polyaniline/CoFe₂O₄ nanocomposites have gained attention because of their wide utilization in optoelectronics and biomedical studies. However, very limited research has been carried out on the anticandidal activity of polyaniline/CoFe₂O₄ nanocomposite against Candida spp. Thus, the study was designed to investigate the anticandidal potential of PANI/CoFe₂O₄ nanocomposite against Candida albicans 077. PANI/CoFe₂O₄ nanocomposite (denoted as “cfPNCs”) was synthesized by polymerization of aniline in the presence of CoFe₂O₄ nanoparticles. The structural and thermal properties of the synthesized PANI/CoFe₂O₄ nanocomposite were investigated. It was noteworthy that PANI/CoFe₂O₄ nanocomposite showed promising anticandidal activity in a dose-dependent manner. Results also showed that the protection of histidine (a ROS quencher) against ROS clearly suggested the implication of ROS in anticandidal activity of PANI/CoFe₂O₄ nanocomposite. It is encouraging to conclude that PANI/CoFe₂O₄ nanocomposite bears the potential of their applications in biomedicine, especially nanotherapy for diseases caused by C. albicans.     

Synthesis and characterization of polyaniline/silicon dioxide composites and preparation of conductive films

The focus of this study was to synthesize the inherently conductive polymer polyaniline using an optimized process to prepare polyaniline/silicon dioxide (PANI/SiO₂) composites by in situ polymerization and ex situ solution mixing. PANI and PANI/SiO₂ composite films were prepared by drop‐by‐drop and spin coating methods. The electrical conductivities of HCl doped PANI film and PANI/SiO₂ composite films were measured according to the standard four‐point‐probe technique. The composite films exhibited an increase in electrical conductivity over neat PANI. PANI and PANI/SiO₂ composites were also investigated by spectroscopic methods including UV‐Vis, FT‐IR, and Photoluminescence. UV‐Vis and FT‐IR studies showed that SiO₂ particles affect the quinoid units along the polymer backbone and indicate strong interactions between the SiO₂ particles and the quinoidal sites of PANI (doping effect). The photoluminescence properties of PANI and PANI/SiO₂ composites were studied and the PANI/SiO₂ composites showed increased intensity as compared to neat PANI. The increase of conductivity of PANI/SiO₂ composite may be partially due to the doping or impurity effect of SiO₂ where the silicon dioxides compete with chloride ions. The morphology of particles and films were examined by a scanning electron microscope (SEM). SEM measurements indicated that the SiO₂ were well dispersed and isolated in composite films. Copyright © 2009 John Wiley & Sons, Ltd.     

ICP-AES determination of trace elements after preconcentrated with p-dimethylaminobenzaldehyde-modified nanometer SiO2 from sample solution

A new method that utilizes p-dimethylaminobenzaldehyde-modified nanometer SiO₂ (SiO₂-p-DMABD) as a solid phase extractant has been developed for simultaneous preconcentration of trace Cr(III), Cu(II), Fe(III) and Pb(II) prior to the measurement by inductively coupled plasma atomic emission spectrometry (ICP-AES). The preconcentration conditions of analytes were investigated, including the pH value, the shaking time, the mass of sorbent, the sample flow rate and volume, the elution condition and the interfering ions. The adsorption capacity of nanometer SiO₂-p-DMABD was found to be (mg g^− 1) Cr(III): 6.2, Cu(II): 18.6, Fe(III): 4.7 and Pb(II): 6.0 at pH 4. The adsorbed metals were quantitatively eluted with 4 mL of 1.0 mol L^− 1 HCl. According to the definition of IUPAC, the detection limits (3σ) of this method for Cr(III), Cu(II), Fe(III) and Pb(II) were 0.79, 1.27, 0.40 and 1.79 ng mL^− 1, respectively. The proposed method achieved satisfied results when it was applied to the determination of trace Cr(III), Cu(II), Fe(III) and Pb(II) in biological and water samples.     

Radar Absorption Properties of Ni0.5Zn0.5Fe2O4/PANI/epoxy Nanocomposites

A nitrate? citrate gel was prepared from metallic nitrates and citric acid by sol? gel process and was further used to synthesize Ni_0.5Zn_0.5Fe₂O₄ nanocrystalline powder by auto‐combustion. Then, two novel 15 and 35% (w/w) magnetic Ni_0.5Zn_0.5Fe₂O₄ containing polyaniline nanocomposites, named as PANI‐Ni15 and PANI‐Ni35, respectively, were prepared via in‐situ polymerization of aniline in an aqueous solution containing proper amount of Ni_0.5Zn_0.5Fe₂O₄ magnetic powder. The incorporation of the nanopowders to PANI matrix was confirmed by X‐ray diffraction (XRD), IR and SEM. Synthesized PANI‐NiZn ferrite composite particles were subsequently added to an epoxy resin matrix to produce related nanocomposites. The morphological properties of these nanocomposite materials were investigated by SEM and TEM. The electromagnetic‐absorbing properties were studied by measuring the reflection loss in the frequency range of 8.0 to 12.0 GHz. Results showed the reflection loss of the PANI‐Ni35 composite is higher than pure polyaniline and PANI‐Ni15. The good reflection loss of the nanocomposites suggests their potential applicability as radar absorber.     

Synthesis and characterization of CDs/Al2O3 nanofibers nanocomposite for Pb2+ ions adsorption and reuse for latent fingerprint detection

This study reports a new approach of preparation of carbon dots coated on aluminum oxide nanofibers (CDs/Al₂O₃NFs) nanocomposite and reusing the spent adsorbent of lead (Pb²⁺) ions loaded adsorbent (Pb²⁺-CDs/Al₂O₃NFs) nanocomposite for latent fingerprint detection (LFP) after removing Pb²⁺ ions from aqueous solution. CDs/Al₂O₃NFs nanocomposite was prepared by using CDs and Al₂O₃NFs with adsorption processes. The prepared nanocomposite was then characterized by using UV–visible spectroscopy (UV–visible), Fourier transforms infrared spectroscopy (FTIR), Fluorescence, X-ray diffraction pattern (XRD), scanning electron microscope (SEM), Transmission electron microscopy (TEM), Energy-dispersive X-ray spectroscopy (EDS), Zeta potential, X-ray photoelectron spectroscopy (XPS). The average size of the CDs was 51.18 nm. The synthesized CDs/Al₂O₃NFs nanocomposite has proven to be a good adsorbent for Pb²⁺ ions removal from water with optimum pH 6, dosage 0. 2 g/L. The results were best described by the Freundlich Isotherm model. The adsorption capacity of CDs/Al₂O₃NFs nanocomposite showed the best removal of Pb²⁺ ions with q_m = (177. 83 mg/g), when compared to the previous reports. This adsorption followed the pseudo-second order kinetic model. ΔG and ΔH values indicated spontaneity and the endothermic nature of the adsorption process. CDs/Al₂O₃NFs nanocomposite therefore showed potential as an effective adsorbent. The data were observed from adsorption–desorption after 6 cycles which showed good adsorption stability and re- usability of CDs/Al₂O₃NFs nanocomposite. Furthermore, the spent adsorbent of Pb²⁺-CDs/Al₂O₃NFs nanocomposite has proven to be sensitive and selective for LFP detection on various porous substrates. Hence Pb²⁺-CDs/Al₂O₃NFs nanocomposite can be reused as a good fingerprint labelling agent in LFP detection so as to avoid secondary environmental pollution by disposal of the spent adsorbent.     

Synthesis and characterization of Fe2O3/SiO2 nanocomposites

Fe₂O₃/SiO₂ nanocomposites based on fumed silica A-300 (S_BET = 337 m²/g) with iron oxide deposits at different content were synthesized using Fe(III) acetylacetonate (Fe(acac)₃) dissolved in isopropyl alcohol or carbon tetrachloride for impregnation of the nanosilica powder at different amounts of Fe(acac)₃ then oxidized in air at 400–900 °C. Samples with Fe(acac)₃ adsorbed onto nanosilica and samples with Fe₂O₃/SiO₂ including 6–17 wt% of Fe₂O₃ were investigated using XRD, XPS, TG/DTA, TPD MS, FTIR, AFM, nitrogen adsorption, Mössbauer spectroscopy, and quantum chemistry methods. The structural characteristics and phase composition of Fe₂O₃ deposits depend on reaction conditions, solvent type, content of grafted iron oxide, and post-reaction treatments. The iron oxide deposits on A-300 (impregnated by the Fe(acac)₃ solution in isopropanol) treated at 500–600 °C include several phases characterized by different nanoparticle size distributions; however, in the case of impregnation of A-300 by the Fe(acac)₃ solution in carbon tetrachloride only α-Fe₂O₃ phase is formed in addition to amorphous Fe₂O₃. The Fe₂O₃/SiO₂ materials remain loose (similar to the A-300 matrix) at the bulk density of 0.12–0.15 g/cm³ and S_BET = 265–310 m²/g.     

Facile synthesis of multifunctional attapulgite/Fe3O4/polyaniline nanocomposites for magnetic dispersive solid phase extraction of benzoylurea insecticides in environmental water samples

In this study, the superparamagnetic attapulgite/Fe₃O₄/polyaniline (ATP/Fe₃O₄/PANI) nanocomposites were successfully synthesized by a one-pot method. Fe (III) was applied as both the oxidant for the oxidative polymerization of aniline and the single iron source of Fe₃O₄ formed by the redox reaction between aniline and Fe (III). The ATP/Fe₃O₄/PANI was used as sorbent for magnetic dispersive solid phase extraction (MDSPE) of benzoylurea insecticides (BUs) in environmental water samples. The as-prepared nanocomposite sorbents were characterized by Fourier transform infrared spectra (FT-IR), X Ray diffraction (XRD), scanning electron microscopy(SEM), transmission electron microscopy (TEM), and vibrating sample magnetometry. Various experimental parameters affecting the ATP/Fe₃O₄/PANI-based MDSPE procedure, including the composition of the nanocomposite sorbents, amount of ATP/Fe₃O₄/PANI nanocomposites, vortex time, pH, and desorption conditions were investigated. Under the optimal conditions, a good linearity was observed for all target analytes, with correlation coefficients (r²) ranging from 0.9985 to 0.9997; the limits of detection (LOD) were in the range of 0.02–0.43 μg L⁻¹, and the recoveries of analytes using the proposed method ranged between 77.37% and 103.69%. The sorbents exhibited an excellent reproducibility in the range of 1.52–5.27% in extracting the five target analytes. In addition, the intra-day and inter-day precision values were found to be in the range of 0.78–6.86% and 1.66–8.41%, respectively. Finally, the proposed ATP/Fe₃O₄/PANI-based MDSPE method was successfully applied to analyze river water samples by rapid preconcentration of BUs.     

Surface redox polymerized SPEEK–MO2–PANI (M = Si, Zr and Ti) composite polyelectrolyte membranes impervious to methanol

We reported sulfonated poly(ether ether ketone) (SPEEK, 61% degree of sulfonation)–metal oxides (MO₂:SiO₂, TiO₂ and ZrO₂)–polyaniline composite membranes. Metal oxides were incorporated into the swelled SPEEK membrane by sol–gel method and cured by thermal treatment. SPEEK–metal oxide membranes surfaces were modified with polyaniline (PANI) by a redox polymerization process. It was observed that water retention capacity of membrane was increased and methanol permeability was reduced due to synergetic effect of metal oxides and surface modification with polyaniline. These composite membranes showed extremely low methanol permeability (1.9–1.3 × 10⁻⁷ cm² s⁻¹), which was lower than till reported values either for SPEEK–metal oxide or SPEEK/PANI membranes. Relatively high selectivity parameter (SP) values at 343 K of these membranes, especially S–SiO₂–PANI and S–TiO₂–PANI, indicated their great advantages over Nafion117 (N117) membrane for targeting on moderate temperature applications due to the synergetic effect of MO₂ and PANI in SPEEK matrix. S–TiO₂–PANI and N117 showed comparable cell performance in direct methanol fuel cell (DMFC).     

Synthesis,characterization and microwave absorption properties of polyaniline/Sm-doped strontium ferrite nanocomposite

Sm-doped strontium ferrite nanopowders (SrSm_0.3Fe_11.7O₁₉) and their composites of polyaniline (PANI)/SrSm_0.3Fe_11.7O₁₉ with 10 wt% and 20 wt% ferrite were prepared by a sol–gel method and an in-situ polymerization process, respectively. The structure, magnetic properties and microwave absorption properties of the samples were characterized by means of X-ray diffraction (XRD), Fourier transform infrared spectra (FT-IR), transmission electron microscope (TEM), vibrating sample magnetometer (VSM) and vector network analyzer, respectively. The particle size of SrSm_0.3Fe_11.7O₁₉ was about 35 nm by using XRD. The ferrite successfully packed by PANI. PANI/SrSm_0.3Fe_11.7O₁₉ possessed the best absorption property with the optimum matching thickness of 3 mm in the frequency of 2–18 GHz. The value of the maximum reflection loss (RL) were −26.0 dB at 14.2 GHz with the 6.5 GHz bandwidth and −24.0 dB at 13.8 GHz with the 7.9 GHz bandwidth for the samples with 10 wt% and 20 wt% ferrite, respectively.     

Preparation of morin modified nanometer SiO<Subscript>2</Subscript> as a sorbent for solid-phase extraction of trace heavy metals from biological and natural water samples

Morin was successful as a chemical modifier to improve the reactivity of the nanometer SiO₂ surface in terms of selective binding and extraction of heavy metal ions. This new functionalized nanometer SiO₂ (nanometer SiO₂-morin) was used as an effective sorbent for the solid-phase extraction (SPE) of Cd(II), Cu(II), Ni(II), Pb(II), Zn(II) in solutions prior to its determination by inductively coupled plasma atomic emission spectrometry (ICP-AES). Experimental conditions for effective adsorption of trace levels of metal ions were optimized with respect to different experimental parameters using static and dynamic procedures in detail. The pH 4.0 was chosen as the optimum pH value for the separation of metal ions on the newly sorbent. Complete elution of the adsorbed metal ions from the nanometer SiO₂-morin was carried out using 2.0 mL of 0.5 mol L⁻¹ of HCl. Common coexisting ions did not interfere with the separation and determination at pH 4.0. The maximum static adsorption capacity of the sorbent at optimum conditions was found to be 22.36, 36.8, 40.37, 33.21 and 25.99 mg metal/g SiO₂-morin for Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II), respectively. The time for 95% sorption for Cu(II) and Ni(II) and 70% sorption for Cd(II), Pb(II) and Zn(II) was less than 2 min. The relative standard deviation (RSD) of the method under optimum conditions was lower than 5.0% (n = 11). The procedure was validated by analyzing the certified reference river sediment material (GBW 08301, China), the results obtained were in good agreement with standard values. The nanometer SiO₂-morin was successfully employed in the separation and preconcentration of trace Cd(II), Cu(II), Ni(II), Pb(II) and Zn(II) from the biological and natural water samples yielding 75-folds concentration factor.     

Speciation analysis of selenoproteins in human serum by microbore affinity-HPLC hyphenated to ICP-Sector field-MS using a high efficiency sample introduction system

Silica gel and nanometer SiO₂ modified with 4-(2-aminoethylamino)-N-(2-(2-aminoethyl amino)ethyl)butanamide (SG-AAEB and nanometer SiO₂-AAEB), which were prepared based on chemical immobilization, were used as sorbents for the solid phase extraction of Cu(II), Fe(III), and Pb(II) prior to their determination by inductively coupled plasma optical emission spectrometry. Adsorption efficiencies of the two sorbents towards metal ions were investigated by batch and column procedures. For both sorbents the preconcentration conditions of analytes including effects of pH, shaking time, sample flow rate and adsorption capacity, were investigated and compared. The differences of silica gel and nanometer SiO₂ in sizes and surface structures resulted in distinct chemical activity and selectivity toward metals. At pH 4, the adsorption capacity of SG-AAEB was found to be 12.2, 14.5 and 9.8 mg g^?1 for Cu(II), Fe(III), and Pb(II), respectively. In comparison, nanometer SiO₂-AAEB showed a high selectivity toward Pb(II) and has a much larger adsorption capacity (22.3 mg g^?1). Furthermore, the application of SG-AAEB and nanometer SiO₂-AAEB for simultaneous preconcentration of trace Cu(II), Fe(III), and Pb(II) from natural samples was performed with satisfactory results.     

Synthesis and properties of silica/polystyrene/polyaniline conductive composite particles

In this study, silica/polystyrene/polyaniline (SiO₂/PS/PANI) conductive composite particles were synthesized by four sequential reactions. The nanosized SiO₂ particles were synthesized from tetraethoxysilane (TEOS) by a sol–gel process with water as the solvent medium, followed by a surface modification with triethoxyvinylsilane; then the surface modified SiO₂ particles were used as seeds to synthesize SiO₂/PS composite particles with soapless seeded emulsion polymerization. Finally, the SiO₂/PS particles were used as seeds to synthesize the SiO₂/PS/PANI conductive composite particles. The sol–gel process of SiO₂, the effect of surface modification, and several other factors that influenced polymerization of styrene in the soapless seeded emulsion polymerization will be discussed. Either potassium persulfate (KPS) or 2,2′‐azobis(isobutyramidine) dihydrochloride (AIBA) was used as the initiator to synthesize the uniform SiO₂/PS particles successfully, and the cross‐section morphology of the SiO₂/PS particles was found to be of a core–shell structure, with SiO₂ as the core, and PS as the shell. The SiO₂/PS particles were well dispersed in many organic solvents. In the following step to synthesize SiO₂/PS/PANI conductive composite particles, sodium dodecyl sulfate (SDS) played an important role, specifically, to absorb aniline onto the surfaces of the SiO₂/PS particles to carry out the polymerization of aniline over the entire surface of the particles. The conductivity of the SiO₂/PS/PANI composite particles approached that of semiconductive materials. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 342–354, 2005     

Glycerol catalytic cyclocondensation with ethanediamine to pyrazinyl compounds over the modified SiO2‐Al2O3

The Fe, Zn, and Mn‐modified SiO₂‐Al₂O₃ catalysts for the glycerol vapor‐phase cyclocondensation with ethanediamine (ED) to 2‐pyrazinemethanol (2‐PMol) and 2‐methylpyrazine (2‐MP) in a fixed‐bed system were prepared by coprecipitation and characterized by N₂ adsorption–desorption, X‐ray powder diffraction, and NH₃ temperature‐programmed desorption (NH₃‐TPD) in the present work. The results showed that the Mn‐modified SiO₂‐Al₂O₃ catalyst with a SiO₂/Al₂O₃ molar ratio 15.84 and 6% Mn gave the highest catalytic activity for formation of 2‐PMol (53.1%) and 2‐MP (42.9%). Mn species could cause the modulation of the acidic species of catalysts, improving the glycerol cyclocondensation with ED to 2‐PMol, and also acted as the catalytic centers for the hydrodehydration of 2‐PMol to 2‐MP. However, too many strong acidic sites could lead to ED self‐cyclocondensation to form a by‐product pyrazine. The optimum temperature was tested to be 380°C for the cyclocondensation over a 6%Mn‐SiO₂‐Al₂O₃ catalyst. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:377–382, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21026