Synthesis of mesoporous TiO2/BMMs via hydrothermal method and its potential application toward adsorption and photocatalytic degradation of crystal violet from aqueous solution

The novel mesoporous TiO₂/BMMs nanocomposites using bimodal mesoporous silica (BMMs) as support and rutile-anatase mixed phase as active species were successfully synthesized via hydrothermal and subsequent calcination method. Their structural and physiochemical properties were characterized by X-ray diffraction, scanning/transmission electron microscopy, BET-isotherms, inductive coupled plasma optical emission spectroscopy, zeta potential, Fourier transform infrared and UV–visible spectroscopy. The results demonstrated that the photocatalytic degradation activity of the synthesized catalysts were extensively enhanced as compare to bare TiO₂, due to the highly uniform dispersion of mixed phases (Anatase and Rutile) TiO₂ on the bimodal mesoporous surfaces. Particularly, the catalytic efficiency became increased as increasing the calcination temperature, showing the highest (98%) overall removal of CV dye using TBH5d as catalyst calcinated at 800 °C. Its most interesting finding is that the % adsorption of TBH5d was 46 %, more than that (26%) of TBH5c calcinated at 600 ℃, however, its % degradation was 21 %, lower than that (39 %) of TBH5c for dye concentration of 20 ppm in 50 min. Meanwhile, the kinetic adsorption and degradation performances were followed the pseudo second and first order models, respectively, further proving the high degradation efficiency of TBH5c with high rate constant than that of TBH5d. Thermodynamic parameters (ΔG_ads, ΔH_ads, and ΔS_ads) were calculated, suggesting the spontaneous and exothermic procedure with high entropy, while the adsorption equilibrium data was fitted to Dubinin-Radushkevich model. Both TBH5c and TBH5d showed an excellent stability and reactivity 71.2 and 61 %, respectively, even after 5th cycles. Thus, these results suggested that that TBH5c may be one of the suitable candidates in wastewater treatments.     

Adsorption of crystal violet dye from aqueous solution using mesoporous materials synthesized at room temperature

In this work, batch adsorption experiments are carried out for crystal violet dye using mesoporous MCM-41 synthesized at room temperature and sulfate modified MCM-41 prepared by impregnation method using H₂SO₄ as sulfatising agent. The surface characteristics, pore structure, bonding behavior and thermal degradation of both the MCM-41 samples are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD) patterns, Fourier transform infrared (FT-IR) spectroscopy and thermo gravimetric analysis (TGA). The adsorption isotherm, kinetics and thermodynamic parameters are investigated for crystal violet (CV) dye using the calcined and sulfated MCM-41. Results are analysed using Langmuir, Freundlich and Redlich-Peterson isotherm models. It is found that the Freundlich model is an appropriate model to explain the adsorption isotherm. The highest adsorption capacity achieved is found to be 3.4×10⁻⁴ mol g⁻¹ for the sulfated MCM-41. The percentage removal of crystal violet dye increases with increase in the pH for both the MCM-41 adsorbents. Kinetics of adsorption is found to follow the second-order rate equation. From the thermodynamic investigation, it is evident that the adsorption is exothermic in nature.     

Enhanced visible light-driven photocatalytic degradation of crystal violet dye using Cr doped BaFe12O19 prepared via facile micro-emulsion route

The Cr ion doping effect on various properties of Cr doped BaCr_xFe_12-xO₁₉ nanoparticles was investigated, which were synthesized via a facile microemulsion approach and properties were studied using XRD, SEM, FTIR, Raman, photoluminescence and UV–visible techniques along with dielectric, optical and ferroelectric properties. The BaCr_xFe_12-xO₁₉ structure was hexagonal involving P63/mmc space group with average crystalline size of 9–18 nm. The NPs exhibited agglomerated platelet heterogeneous morphology. The presence of the Ba-O-Fe functional group was also confirmed by FTIR analysis. The PL analysis revealed that the doping reduced the recombination rate and charge (e^?-h⁺) separation is facilitated. The coercivity (H_c) and saturation polarization (Ps) increased with doping content and dielectric loss reduces with frequency and dopant concentration. The dopant contents also increased the AC conductivity and the optical bandgap found in 1.75–2.83 (eV) range. The BaCr_xFe_12-xO₁₉ exhibited a significantly higher photocatalytic efficiency versus BaFe₁₂O₁₉, and 91 % CV dye was degraded in 90 min under visible light irradiation. Additionally, a recycling experiment was conducted to confirm the stability of the prepared photocatalyst and Cr doped BaCr_xFe_12-xO₁₉ exhibited excellent stability and reusability. The Cr doping affected the dielectric, optical and ferroelectric properties and based on photocatalytic properties of BaCr_xFe_12-xO₁₉, it has potential applications for the destruction of dyes in wastewater under visible light exposure, which will make the process highly feasible for photocatalytic applications.     

Oxidation of crystal violet and malachite green in aqueous solutions — a kinetic spectrophotometric study

The reactions of two triphenyl methane (TPM) dyes—crystal violet (CV⁺) and malachite green (MG⁺)—with N₃^• and OH^• radicals were studied by pulse radiolytic kinetic spectrophotometry. The rate constants for the reaction of the cationic dyes (D⁺) with N₃^• are (9.0±0.6)×10⁹ and (3.0±0.2)×10⁹ dm³ mol⁻¹ s⁻¹ respectively and those for the reaction with OH^• are obtained as (8.0±0.6)×10⁹ and (1.1±0.1)×10⁹ dm³ mol⁻¹ s⁻¹ respectively. The transient spectra resulting from the oxidation of the dyes were characterized. The time-resolved spectra indicate that the reaction with OH^• radicals initially generates an adduct which subsequently dissociates to form the radical dication D^•2+. The D^•2+ species decay by further reaction with the parent dye.     

Ultrasound facilitates and improves removal of triphenylmethane (crystal violet) dye from aqueous solution by activated charcoal: A kinetic study

This work was aimed at removing crystal violet (CV) from an aqueous solution via an ultrasound-aided sorption process. Different operational parameters, such as contact time, ultrasonic power, and the sorbent dosage, were investigated. The results indicated that the sorption process was more rapid compared with the previously stated process; a sorption equilibrium was obtained after 1.5 h. The increase in the dose from 0.02 to 5.0 g/L increased the adsorption efficiency by 100%. The decolorization of the CV pigment occurred very rapidly at the highest sound power, 200 W, and it reached ～85%. The kinetics study indicated that the sorption process fitted the pseudo-second-order model with the chemisorption mechanism. The sorption isotherm data were also interpreted by the mass-transfer model, which established the intraparticle diffusion. Additionally, to estimate the rate-limiting step mechanisms, the intraparticle diffusion was not considered as the sole rate-controlling step. The maximum sorption capacity (q_max) increased from 19.0 to 24 mg/g during the ultrasound and indicated the positive synergistic effect of the ultrasound. The proposed sonosorption technique is a low cost-effective method for purifying water and wastewater from organic pollutants.     

CuNPs as an activator of K2S2O8 for the decolorization of diazo dye in aqueous solution

Degradation of trypan blue (TB) by persulfate/CuNPs system was investigated as a function of TB concentration, persulfate concentration, CuNPs concentration, pH, and reaction temperature in aqueous solution. The rate of the decolorization and destruction of aromatic ring were studied spectrophotometrically. The dye mineralization was performed with potassium dichromate for the determination of chemical oxygen demand (COD) in solution. The blue color reaction mixture became red-chocolate, purple, light blue to dark blue as a function of time. The CuNPs acted as an activator of K₂S₂O₈ and generates various reactive oxygen and/or sulphur species. Decolorization of dye starts due to the cleavage of azo bond by the generated radical species. The role of sulfate radicals (SO₄^?-), and hydroxyl radicals (HO^?) were established by using different radical scavengers. Degradation and mineralization of dye follows first-order kinetics. These results can support the design of remediation processes and also assist in predict their fate in environment.     

Synthesis and application of treated activated carbon for cationic dye removal from modelled aqueous solution

Use of activated carbon (AC) prepared from rice husk and treated with anionic surfactant is investigated to eliminate cationic dye crystal violet (CV) using modelled dye solution. AC modified with anionic surfactant sodium lauryl sulfate (ACSLS) and other two surfactant namely sodium dodecyl sulfonate and hexadecyl trimethyl ammonium bromide were used for the analysis. Optimum ACSLS was analyzed and characterized using BET, XRD, SEM accompanied with XEDS, FTIR, HR-TEM and zeta potential, which confirms the sorption of CV onto ACSLS. Influence of pH, dose of adsorbent, concentration of initial dye, contact time, additive salts as well as actual water samples were investigated. Presence of NH⁴⁺, Ca²⁺, Mg²⁺, Na²⁺, Ca²⁺ and K⁺ cations in dye solution were having negligible (less than 4 %) influence on dye removal capacity. Study of mass transfer parameters revealed intra particle diffusion and film diffusion both played their part, whereas other kinetic studies has shown that experimental data fitted best with Pseudo 2nd order rate. Isotherm studies accompanied with error analysis revealed that Langmuir isotherm controls the adsorption equilibrium with highest capacity of CV adsorption with optimum operating conditions as pH = 6, temperature = 318 K, adsorbent dose = 100 mg/L and dye concentration = 30–60 mg/L. Study of thermodynamics and temperature analysis have shown that the sorption reaction was favourable and spontaneous with rise in temperature and endothermic in nature. Column studies are reported for varying rate of flow, depth of bed and dye concentrations along with analysis of column experimental data with various models like Yoon-Nelson, Thomas, Bohart-Adam and Clark model. Reusability (no. of cycles) of used adsorbent was studied using regeneration experiments. Analysis inferred that AC modified using surfactants can be a useful technique for enhanced adsorption capacity of dyes from aqueous solution and not much work has been reported on use of anionic surfactant modified AC for dye removal process.     

A surface-enhanced Raman scattering method for detection of trace glutathione on the basis of immobilized silver nanoparticles and crystal violet probe

Unsatisfactory sensitivity and stability for molecules with low polarizability is still a problem limiting the practical applications of surface-enhanced Raman scattering (SERS) technique. By preparing immobilized silver nanoparticles (Fe₃O₄/Ag) through depositing silver on the surface of magnetite particles, a highly sensitive and selective SERS method for the detection of trace glutathione (GSH) was proposed on the basis of a system of Fe₃O₄/Ag nanoparticles and crystal violet (CV), in which the target GSH competed with the CV probe for the adsorption on the Fe₃O₄/Ag nanoparticles. Raman insensitive GSH replaced the highly Raman sensitive CV adsorbed on the surface of Fe₃O₄/Ag particles. This replacement led to a strong decrease of the CV SERS signal, which was used to determine the concentration of GSH. Under optimal conditions, a linear response was established between the intensity decrease of the CV SERS signal and the GSH concentration in the range of 50–700 nmol L⁻¹ with a detection limit of 40 nmol L⁻¹. The use of a Fe₃O₄/Ag substrate provided not only a great SERS enhancement but also a good stability, which guarantees the reproducibility of the proposed method. Its use for the determination of GSH in practical blood samples and cell extract yielded satisfactory results.     

Preparation and characterization of a novel zeolite using hydrothermal synthesis in a stirred reactor

This paper describes the preparation of novel zeolite particles by the hydrothermal method in a stirred reactor. The variations between certain properties of the resulting zeolites, such as morphology by the scanning electron microscopy (SEM), pore properties (i.e., surface areas, pore volume, and porosity) by the surface area & porosity analyzer, crystallinity by the X-ray diffraction (XRD) and Si/Al ratio by the inductively coupled plasma-atomic absorption spectrometer (ICP-AES), and the process parameters, such as aging time, agitation speed, temperature and pressure, were studied at a specific gel composition. The optimal value of the Brunauer–Emmett–Teller (BET) surface area was found to be over 400 m²/g in the resulting microporous zeolite, indicating that the size was centered on about 0.5 nm. The XRD image was indicative of the probable formation of zeolite-P2 in the hydrothermal synthesis.     

CoCr2O4@GeO2@ZnO core-shell nanoparticle as a novel recoverable catalyst: Preparation,characterization and photocatalytic degradation of basic fuchsin dye

Highly photosensitive novel nanostructure CoCr₂O₄@GeO₂@ZnO core-shell UV–Visible light driven photocatalyst have been fabricated by sol-gel method. The double coating of GeO₂ and ZnO on CoCr₂O₄ nanoparticles could intensely stabilize the CoCr₂O₄ in aqueous solution and avoid their oxidation. The synthesized CoCr₂O₄, CoCr₂O₄@GeO₂, and CoCr₂O₄@GeO₂@ZnO nanostructures were characterized by several techniques including FT-IR, XRD, UV-DRS FE-SEM, EDS, HR-TEM and BET analysis. The potential application of CoCr₂O₄@GeO₂@ZnO is examined for photocatalytic degradation of Basic Fuchsin dye in aqueous heterogeneous suspension. The detailed degradation pathway has been established by using LC-MS analysis and by a careful identification of intermediate products. The result suggest that CoCr₂O₄@GeO₂@ZnO photocatalysis may be envisaged as a method for treatment of diluted waste water in textile industries. In the present study, the degradation yield for Basic Fuchsin dye 100% within 30 ​min using core-shell CoCr₂O₄@GeO₂@ZnO nanostructure material.     

Optimization of solid phase dispersive field‐assisted ultrasonication for the extraction of auramine O and crystal violet dyes using central composite design

Simultaneous preconcentration and determination of auramine o (AO) and crystal violet (CV) dyes from aqueous solution was conducted by ultrasound assisted (dispersive) solid phase microextraction (UASPME) based on SnO₂/SnS composite loaded activated carbon (SnO₂/SnS‐NCs‐AC). The prepared of SnO₂/SnS‐NCs‐AC was characterized by FESEM and XRD analysis. Main and interaction influences of operational parameters such as pH, sonication time, amounts of sorbent, and type of eluent on extraction efficiency were investigated by central composite design and optimized with desirability function approach (DFA). ANOVA was conducted and shows that optimized values were found at 15.33 min sonication time, 0.019 g SnO₂/SnS‐NCs‐AC mass, pH 5.46 and among different solvents, dimethyl formamide was selected as an efficient eluent. Under this conditions recoverees percentage were obtained 82.85% and 86.70% for AO and CV, respectively. Based on F‐test under ANOVA all main effect and interaction effect of understudy parameters has the significant effect on the responses. At optimum conditions, limit of detection (0.0015 and 0.001 mg/l), limit of quantitation (0.4 and 0.4 mg/l), limit of linearity (9.0 and 9.0 mg/l), enrichment factor (33.48 and 83.71) and percent relative standard deviation (3.44 and 4.20) were found to be for auramine o and crystal violet dyes, respectively. Finally, the method was successfully applied for the preconcentration and determination of AO and CV in water samples and ER% of 89.0‐97.0 and 96.2–98.0% as acceptable range were found to be for AO and CV samples, respectively.     

The effect of cation size on ion pairing of methyl orange dye with tetraalkylammonium and benzyltrialkylammonium ions in aqueous solution

Formation constants have been measured by a solvent distribution method for the ion pairing of an arene sulfonate, methyl orange dye, with two series of quaternary ammonium ions: R₄N⁺(R=Et,n-Pr,n-Bu, andn-Pent) and C₆H₅CH₂R₃N⁺ (R=Me, Et,n-Pr,n-Bu,n-Pent, andn-Hex). Ion pairing increases dramatically as the length of the R group increases beyond butyl. Using a hard-sphere model for contact ion pairs, it is estimated that coulombic attraction contributes about –kT to the binding free energy and decreases slightly with increasing size of R₄N⁺. Other factors related to solvation effects, of which cosphere overlap predominates, contribute from –2kT to –7kT of binding energy. Plots of logK for association as a function of cation size show an inflection with decreasing slope between R=propyl and R=butyl. Possible causes for the inflection are considered.     

Controlling the morphology,size and phase of Nb2O5 crystals for high electrochemical performance

Herein, the nano-sized niobium pentoxide (Nb₂O₅) with different morphologies and phase structures are synthesized through a very simple thermal treatment method, including the pseudohexagonal Nb₂O₅ nanosheets and pseudohexagonal Nb₂O₅ nanoparticles, orthorhombic Nb₂O₅ nanoparticles. The synthesized pseudohexagonal Nb₂O₅ nanosheets and orthorhombic Nb₂O₅ nanoparticles exhibit better cycling and rate performance than the pseudohexagonal Nb₂O₅ nanoparticles due to the different morphologies and phase structures.     

Liquid chromatography-tandem mass spectrometry method for the determination of dye residues in aquaculture products: development and validation

A method is described for the identification and the quantitative determination of the triphenylmethane dyes, malachite green (MG), crystal violet (CV), brilliant green (BG) and leuco malachite green (LMG) and leuco crystal violet (LCV). The analytes were isolated from the matrix by liquid-liquid extraction with acetonitrile. Determination was performed using LC-MS/MS with positive electrospray ionisation. 4 different deuterated internal standards were introduced to improve the quantitative performance of the method. The method has been validated in line with the EU criteria of Commission Decision 2002/657/EC in accordance with the minimum required performance limit (MRPL) set at 2 μgkg(-1) for the sum of MG and LMG. For all the monitored compounds, accuracy, intra-day and inter-day precision were determined at each level of fortification (0.5, 0.75, 1.0 and 2.0 μgkg(-1)). Decision limits CCα and detection capabilities CCβ were calculated according to the standard ISO 11843-2. A study on the applicability of the method was conducted on various aquacultured species with the aim to assess the matrix effects. The presence of residues of leuco brilliant green in fish has also been confirmed from experimental study performed on trout treated with brilliant green, using LTQ-Orbitrap mass spectrometer.     

Facile synthesis and characterization of Fe2O3 nanoparticles using L-lysine and L-serine for efficient photocatalytic degradation of methylene blue dye

In this work, Fe₂O₃ nanoparticles, abbreviated as OL and OS, were facilely synthesized by the combustion procedure using L-lysine and L-serine as organic fuels, respectively. Also, the OL and OS samples were identified using different instruments such as Raman spectrometer, FT-IR spectrophotometer, UV–Vis spectrophotometer, XRD, HR-TEM, BET surface area, and FE-SEM. The XRD confirmed that the mean grain size of OL and OS samples is 42.23 and 33.16 nm, respectively. The HR-TEM images confirmed that irregular, hexagonal, and spherical shapes, have an average diameter of 39.13 and 34.28 nm, were observed in the OL and OS samples, respectively. The BET surface area of the OL and OS samples is 16.20 and 28.34 m²/g, respectively. Additionally, the OL and OS samples were accomplished for the photocatalytic degradation of methylene blue dye in the absence and presence of hydrogen peroxide. The % degradation of 45 mL of 25 mg/L of methylene blue dye in the case of using OL and OS samples in the absence of hydrogen peroxide is 55.23 and 63.64 % after 120 min, respectively. Also, in the presence of hydrogen peroxide, the % degradation in the case of using OL and OS samples is 100 % after 35 and 25 min, respectively.     

Synthesis of nanosized TiO2 particles in reverse micelle systems and their photocatalytic activity for degradation of toluene in gas phase

Nanosized pure TiO₂ particles with high crystallinity and large surface area were prepared by hydrolysis of tetrabutyl titanate in water/Triton X-100/isooctane reverse micelle solutions as reaction media followed by hydrothermal treatment to improve crystallinity. The prepared TiO₂ nanoparticles were characterized by XRD, BET, TGA, FT-IR and TEM. The size of ultrafine particles was controlled by changing the water content of the reverse micelle solution. The TiO₂ particles showed monodispersity, large surface area and high degrees of crystallinity and thermostability. The photocatalytic activity of the TiO₂ particles was evaluated by decomposition of toluene in the gas phase. The activity of the TiO₂ nanoparticles was higher than that of commercially available anatase fine particles, such as ST-01, which is one of the most active photocatalysts for degradation of organic compounds in the gas phase.     

CO2 regulates phase transition of sodium oleate and 3-(diethylamino)-propylamine in aqueous solution

We reported that the phase conversion of the micelles in aqueous solution prepared by sodium oleate (NaOA) and 3-(diethylamino)-propylamine (DEAPA) in the presence of carbon dioxide. This micellar structure is very sensitive to CO₂ and the pH value of the solution is continuously reduced with the continuous introduction of carbon dioxide. When pH?>?10.2, the mixed solution of NaOA and DEAPA is mainly in the form of spherical micelles; when the 10.2?>?pH?>?9.6, the mixed solution mainly in the worm-like micelles (WLM), where the solution has a significant viscosity change; when the 9.6?>?pH?>?9.1, the NaOA and DEAPA mixed solution becomes the aqueous two-phase system (ATPS), which is composed of two layers, the upper layer is the vesicle structure and the lower layer is the WLM structure; when the pH between 9.1?>?pH?>?9.0, NaOA and DEAPA mixed solution form vesicles, thus realizing the regulation of CO₂ on the micellar structure transition of NaOA and DEAPA mixed solution. Such these microstructures transition could be confirmed by Rheology measurement, DLS and Cryo-TEM.     

CuFe2O4@GO nanocomposite as an effective and recoverable catalyst of peroxymonosulfate activation for degradation of aqueous dye pollutants

Recently, heterogeneous activation of peroxymonosulfate (PMS) to oxidatively degrade organic pollutants has been a hotspot. In the present work, copper ferrite-graphite oxide hybrid (CuFe₂O₄@GO) was prepared and used as catalyst to activate PMS for degradation of methylene blue (MB) in aqueous solution. A high degradation efficiency (93.3%) was achieved at the experimental conditions of 20 mg/L MB, 200 mg/L CuFe₂O₄@GO, 0.8 mmol/L PMS, and 25 °C temperature. Moreover, CuFe₂O₄@GO showed an excellent reusability and stability. The effects of various operational parameters including pollutant type, solution pH, catalyst dosage, PMS dosage, pollutant concentration, temperature, natural organic matter (NOM), and inorganic anions on the catalytic degradation process were comprehensively investigated and elucidated. The further mechanistic study revealed the Cu(II)/Cu(I) redox couple on CuFe₂O₄@GO played the dominant role in PMS activation, where both hydroxyl and sulfate radicals were generated and proceeded the degradation of pollutants. In general, CuFe₂O₄@GO is a promising heterocatalyst for PMS-based advanced oxidation processes (AOPs) in wastewater treatment.     

A new method for determination of myricetin and quercetin using solid phase microextraction-high performance liquid chromatography-ultra violet/visible system in grapes, vegetables and red wine samples

A new approach for the extraction and determination of myricetin and quercetin by using SPME-HPLC-UV system has been developed. The method involves adsorption of flavonoids on CAR/TPR fiber followed by desorption in the desorption chamber of SPME-HPLC interface using citrate buffer (0.001 M):acetonitrile (70:30) as mobile phase and UV detection at 372 nm. The detection limits for myricetin and quercetin are 48.3 and 24.7 pg mL⁻¹, respectively. The proposed method was validated by determining myricetin and quercetin in tomato, onion, grapes and red wine samples.     

Multi-residue method for the analysis of synthetic surfactants and their degradation metabolites in aquatic systems by liquid chromatography-time-of-flight-mass spectrometry

Synthetic surfactants are economically important chemicals, as they are widely used in household cleaning detergents, textiles, paints, polymers and personal care products. In this work we have developed a method capable of the isolation and analysis of the most widely used surfactants (linear alkylbenzene sulfonates, LAS, nonylphenol ethoxylates, NPEO, and alcohol ethoxylates, AEO) and their main degradation products (sulfophenyl carboxylic acids, SPC, nonylphenol ethoxycarboxylates, NPEC, and polyethylene glycols, PEG) in aqueous and solid environmental matrices. First, analytes were extracted by ultrasonic extraction from sediments and suspended solids using methanol at 50°C as solvent and 3 cycles (30 min per cycle). Clean-up and pre-concentration of the extracts and water samples were carried out by solid-phase extraction (SPE), using Oasis HLB cartridges. Recoveries were generally about 80% for most compounds. Identification and quantification of target compounds were performed by liquid chromatography-time-of-flight-mass spectrometry (LC-ToF-MS), which has been much less used in the field of environmental analysis than other MS techniques. Examples which illustrate the possible advantages of this technique for multi-analyte analysis of target and non-target contaminants in environmental samples are provided. Finally, the methodology developed here was validated by measuring the concentration of surfactants and their metabolites in selected marine sediment and seawater samples collected in Long Island Sound (NY), and in influent and effluent wastewater from Stony Brook treatment plant (NY). This paper presents some of the first data relative to the occurrence of PEG in the environment, especially in sediments where concentrations were generally higher (up to 1490 μg/kg) than those for other classes of targeted surfactants and their metabolites.