Low-temperature catalytic oxidation of toluene over Mn–Co–O/Ce<Subscript>0.65</Subscript>Zr<Subscript>0.35</Subscript>O<Subscript>2</Subscript> mixed oxide catalysts

Ce_0.65Zr_0.35O₂ was prepared by co-precipitation method and a series of Mn_1-yCo_y/Ce_0.65Zr_0.35O₂ catalysts with different Mn/Co molar ratio were synthesized via the co-impregnation method. These catalysts were applied for gaseous toluene oxidation, which showed that the catalytic activity was significantly improved by the addition of Mn and Co. In particular, Mn–Co(1:1)/Ce_0.65Zr_0.35O₂ with Mn/Co molar ratio of 1:1 displayed the best result with the lowest complete conversion temperature of 242 °C under a GHSV of 12,000 h^?1. The as-prepared catalysts were characterized by X-ray diffraction, H₂ temperature-programmed reduction, N₂ adsorption–desorption, X-ray photoelectron spectroscopy and O₂ temperature-programmed desorption. These characteristics revealed that the coexistence of Mn and Co could enhance the redox property and generate more surface adsorbed oxygen, thereby improving the performance of the catalysts for toluene low-temperature oxidation. The Mn–Co(1:1)/Ce_0.65Zr_0.35O₂ exhibited the best catalytic activity and high stability. The excellent catalytic activity of the Mn–Co(1:1)/Ce_0.65Zr_0.35O₂ could be ascribed to a greater amount of surface adsorbed oxygen species and Mn⁴⁺ on the catalyst surface.     

Highly dispersed Mn2O3−Co3O4 nanostructures on carbon matrix as heterogeneous Fenton-like catalyst

This work reports the synthesis of various carbon (Vulcan XC-72 R) supported metal oxide nanostructures, such as Mn₂O₃, Co₃O₄ and Mn₂O₃−Co₃O₄ as heterogeneous Fenton-like catalysts for the degradation of organic dye pollutants, namely Rhodamine B (RB) and Congo Red (CR) in wastewater. The activity results showed that the bimetallic Mn₂O₃−Co₃O₄/C catalyst exhibits much higher activity than the monometallic Mn₂O₃/C and Co₃O₄/C catalysts for the degradation of both RB and CR pollutants, due to the synergistic properties induced by the Mn−Co and/or Mn (Co)−support interactions. The degradation efficiency of RB and CR was considerably increased with an increase of reaction temperature from 25 to 45°C. Importantly, the bimetallic Mn₂O₃−Co₃O₄/C catalyst could maintain its catalytic activity up to five successive cycles, revealing its catalytic durability for wastewater purification. The structure–activity correlations demonstrated a probable mechanism for the degradation of organic dye pollutants in wastewater, involving •OH radical as well as Mn²⁺/Mn³⁺ or Co²⁺/Co³⁺ redox couple of the Mn₂O₃−Co₃O₄/C catalyst.     

Mesoporous Mn promoted Co3O4 oxides as an efficient and stable catalyst for low temperature oxidation of CO

Mesoporous Mn-doped Co₃O₄ catalysts were successfully prepared via a dry soft reactive grinding method based on solid state reaction, and their catalytic performances on CO oxidation were evaluated at a high space velocity of 49,500 mL g⁻¹ h⁻¹. A significant promoted effect was observed once the atomic ratios of Mn/(Co+Mn) were lower than 10%, for instance, the temperature for 50% conversion decreased to about −60 °C, showing superior catalytic performance compared to the single metal oxide. Especially, the Mn-promoted Co₃O₄ catalyst with a Mn/(Co+Mn) molar ratio of 10% could convert 100% CO after 3000 min of time-on-steam without any deactivation at room temperature. As prepared catalysts were characterized by XRD, N₂-adsorption/desorption, TEM, H₂-TPR, O₂-TPD and CO-titration analysis. The significant enhancement of performance for oxidation of CO over Mn-Co-O mixed oxides was associated with the high active oxygen species concentrations formed during the pretreatment in O₂ atmosphere.     

Cu_xCo_(1-x)/Al_2O_3/FeCrAl整体式催化剂上甲苯催化燃烧(英文)

以FeCrAl合金薄片为基底,Al2O3浆料为过渡胶体,不同摩尔比的Cu、Co为催化活性组分,制备了一系列CuxCo1-x/Al2O3/FeCrAl(x=0-1)新型整体式催化剂.采用X射线粉末衍射(XRD),扫描电子显微镜(SEM),X光电子能谱(XPS)和程序升温还原(TPR)等手段对催化剂的结构进行了表征.在微型固定床反应器上评价了催化剂的催化甲苯燃烧性能.研究结果表明:在所制备的整体式催化剂上,当Cu含量比较低时,形成了Cu-Co-O固溶体;当Cu含量比较高时,可以测得CuO的衍射峰.催化剂表面颗粒大小和形貌与Cu、Co摩尔比密切相关.在催化剂表面,Co以Co2+和Co3+价态存在,而Cu主要以Cu2+价态存在.催化剂中的Cu可以改善Co的氧化还原性,从而有利于催化剂活性的提高.在所制备的催化剂中,Cu0.5Co0.5/Al2O3/FeCrAl催化剂具有最好的活性,甲苯在374oC可以完全催化燃烧消除.     

纳米片聚结Co3O4微球催化甲苯燃烧

采用乙二胺辅助的水热法制备了纳米片聚结的Co₃O₄微球. 利用多种分析技术表征了其物化性质,并评价了其对甲苯燃烧的催化活性. 结果表明,由添加1.0 ml乙二胺经140 ℃水热处理12 h后制得的Co₃O₄样品呈纳米片聚结的微球状表面形貌. Co₃O₄微球样品的比表面积约为66 m² g^-1. 与体相Co₃O₄样品相比,Co₃O₄微球样品具有较高的氧吸附物种浓度和较好的低温还原性. 当空速为20000 ml g^-1 h^-1时,在Co₃O₄微球样品上甲苯转化率达到50%和90%时的反应温度分别为230和254 ℃. 这与该样品具有较大的比表面积、较高的氧吸附物种浓度和较好的低温还原性相关.     

一步水热合成Y-Co3O4复合氧化物催化剂及催化分解N2O

用一步水热、分步水热、浸渍等方法分别制备Y-Co₃O₄复合氧化物,用于催化分解N₂O的反应,其中,一步水热法制备的催化剂活性较高。再用一步水热法制备了不同Y/Co物质的量比的Y-Co₃O₄复合氧化物,在优化出的催化剂（0.03Y-Co₃O₄）表面浸渍K₂CO₃溶液,制备K改性催化剂（0.02K/0.03Y-Co₃O₄）。用X射线衍射（XRD）、N₂物理吸附、H₂程序升温还原（H₂-TPR）、O₂程序升温脱附（O₂-TPD）、扫描电镜（SEM）、X射线光电子谱（XPS）等技术表征催化剂结构。研究发现,Co₃O₄和Y-Co₃O₄同为尖晶石结构,但Y-Co₃O₄的催化活性显著高于Co₃O₄。K改性增加了催化剂表面的活性位（Co²⁺）,还有利于吸附氧的脱除,从而提高了催化剂活性。在无氧无水、有氧无水、有氧有水气氛中,K改性催化剂上的N₂O全分解温度分别为325、350、375 ℃,催化剂活性较高。有氧有水气氛350 ℃连续反应50 h,K改性催化剂上N₂O分解率保持90%以上,稳定性较高。研究发现,Y-Co₃O₄及K改性催化剂上N₂O分解反应的E_a和lnA之间存在动力学补偿效应。     

Plasma‐Engraved Co3O4 Nanosheets with Oxygen Vacancies and High Surface Area for the Oxygen Evolution Reaction

Co₃O₄, which is of mixed valences Co²⁺ and Co³⁺, has been extensively investigated as an efficient electrocatalyst for the oxygen evolution reaction (OER). The proper control of Co²⁺/Co³⁺ ratio in Co₃O₄ could lead to modifications on its electronic and thus catalytic properties. Herein, we designed an efficient Co₃O₄‐based OER electrocatalyst by a plasma‐engraving strategy, which not only produced higher surface area, but also generated oxygen vacancies on Co₃O₄ surface with more Co²⁺ formed. The increased surface area ensures the Co₃O₄ has more sites for OER, and generated oxygen vacancies on Co₃O₄ surface improve the electronic conductivity and create more active defects for OER. Compared to pristine Co₃O₄, the engraved Co₃O₄ exhibits a much higher current density and a lower onset potential. The specific activity of the plasma‐engraved Co₃O₄ nanosheets (0.055 mA cm^?2_BET at 1.6 V) is 10 times higher than that of pristine Co₃O₄, which is contributed by the surface oxygen vacancies.     

水热合成Co3O4的制备参数调变及其催化分解N2O性能

以十六烷基三甲基溴化胺（CTAB）为模板剂,通过调变CTAB浓度水热合成了氧化钴前驱体,焙烧制得棒状形貌的Co₃O₄,在其表面浸渍K₂CO₃溶液制得K改性的Co₃O₄催化剂,用于N₂O分解。用X射线衍射（XRD）、N₂物理吸附（BET）、扫描电镜（SEM）、X射线光电子能谱（XPS）、H₂程序升温还原（H₂-TPR）和O₂程序升温脱附（O₂-TPD）等技术对催化剂进行了表征,考察了CTAB/钴及尿素/钴物质的量比等制备参数对Co₃O₄催化分解N₂O活性的影响。结果表明,CTAB浓度为0.05 mol/L、CTAB/钴离子物质的量比为1、尿素/钴离子物质的量比为4时,所制备的Co₃O₄催化剂具有较高的N₂O分解活性,而K改性可以进一步提升其催化性能。K改性的Co₃O₄在有氧有水气氛中400℃下进行N₂O分解反应,50 h后N₂O转化率仍保持在91%以上。     

基于电纺丝法的In2O3/CdO复合材料的制备及甲醛气敏特性

用静电纺丝法制备了In(NO₃)₃/聚乙烯吡咯烷酮(PVP)纺丝前驱物, 然后分别在500、600、700℃时烧结得到三种In₂O₃ 纳米纤维. 通过X 射线衍射(XRD)仪、热重差热分析(TG/DTA)、场发射扫描式电子显微镜(FE-SEM)表征结果得知, 500℃时In₂O₃的晶相已经形成, 且粒径为最小, 约为24 nm, 纳米纤维呈介孔结构.将三种烧结温度的In₂O₃纤维制作成气敏元件, 测试对比了三种元件对甲醛气体的敏感特性, 结果表明, 500℃烧结得到的In₂O₃纳米纤维在工作温度为240℃时响应最好, 对浓度为10×10^-6 (体积分数, φ)甲醛的响应为7.用静电纺丝法合成了CdO 纳米颗粒, 通过XRD、SEM 表征得知CdO 呈粒径约为68 nm 的颗粒. 将In₂O₃和CdO以不同摩尔比(1:1, 10:1, 20:1)复合, 对比测试了纯In₂O₃及三种In₂O₃/CdO复合材料对应的气敏元件对甲醛的气敏特性, 测试结果表明当In₂O₃纳米纤维与CdO纳米颗粒以摩尔比10:1 复合时, 元件的工作温度较低(200℃), 且对甲醛表现出最佳的气敏特性, 对浓度为10×10^-6甲醛的响应为13.6, 响应/恢复时间为140 s/32s. 最后对不同摩尔比复合的In₂O₃/CdO对甲醛的气敏机理进行了初步分析.     

ZnO/Co3O4 Porous Nanocomposites Derived from MOFs: Room‐Temperature Ferromagnetism and High Catalytic Oxidation of CO

ZnO/Co₃O₄ porous nanocomposites were successfully fabricated by the thermal decomposition of Prussian Blue analogue (PBA) Zn₃[Co(CN)₆]₂ nanospheres obtained at room temperature. Interestingly, ZnO/Co₃O₄ porous nanocomposites exhibit room‐temperature ferromagnetism. Moreover, the ZnO/Co₃O₄ porous nanocomposites show good catalytic activity for CO oxidation, and the CO conversion rate reaches 100 % at 250 °C. It is suggested that the synergistic effect of each component, relative high surface area (32 m² g^?1) and porous structure lead to the promising catalytic properties.     

Different Synthesis Protocols for Co3O4–CeO2 Catalysts—Part 1: Influence on the Morphology on the Nanoscale

Co₃O₄‐modified CeO₂ (Co/Ce 1:4) was prepared by a combination of sol–gel processing and solvothermal treatment. The distribution of Co was controlled by means of the synthesis protocol to yield three different morphologies, namely, Co₃O₄ nanoparticles located on the surface of CeO₂ particles, coexistent Co₃O₄ and CeO₂ nanoparticles, or Co oxide structures homogeneously distributed within CeO₂. The effect of the different morphologies on the properties of Co₃O₄–CeO₂ was investigated with regard to the crystallite phase(s), particle size, surface area, and catalytic activity for CO oxidation. The material with Co₃O₄ nanoparticles finely dispersed on the surface of CeO₂ particles had the highest catalytic activity.     

Effect of Calcination Temperature on Surface Oxygen Vacancies and Catalytic Performance Towards CO Oxidation of Co3O4 Nanoparticles Supported on SiO2

Co₃O₄/SiO₂ catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char-acterized with X-ray diffraction (XRD), laser Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR) and X-ray absorption fine structure (XAFS) spectroscopy. Both XRD and Raman spectroscopy only detect the ex-istence of Co₃O₄ crystallites in all catalysts. However, XPS results indicate that excess Co²⁺ ions are present on the surface of Co₃O₄ in Co₃O₄(200)/SiO₂ as compared with bulk Co₃O₄. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co₃O₄ in Co₃O₄(200)/SiO₂, and XAFS results demonstrate that Co₃O₄ in Co₃O₄(200)/SiO₂ con-tains excess Co²⁺. Increasing calcination temperature results in oxidation of excess Co²⁺ and the decrease of the concentration of surface oxygen vacancies, consequently the for-mation of stoichiometric Co₃O₄ on supported catalysts. Among all Co₃O₄/SiO₂ catalysts,Co₃O₄(200)/SiO₂ exhibits the best catalytic performance towards CO oxidation, demon-strating that excess Co²⁺ and surface oxygen vacancies can enhance the catalytic activity of Co₃O₄ towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silica-supported Co₃O₄ catalysts and highlight the important role of surface oxygen vacancies on Co₃O₄.     

Efficient Selective Oxidation of Aromatic Alkanes by Double Cobalt Active Sites over Oxygen Vacancy-rich Mesoporous Co3O4

The development of efficient catalyst for selective oxidation of hydrocarbon to functional compounds remains a challenge. Herein, mesoporous Co₃O₄ (mCo₃O₄-350) showed excellent catalytic activity for selective oxidation of aromatic-alkanes, especially for oxidation of ethylbenzene with a conversion of 42 % and selectivity of 90 % for acetophenone at 120 °C. Notably, mCo₃O₄ presented a unique catalytic path of direct oxidation of aromatic-alkanes to aromatic ketones rather than the conventional stepwise oxidation to alcohols and then to ketones. Density functional theory calculations revealed that oxygen vacancies in mCo₃O₄ activate around Co atoms, causing electronic state change from Co³⁺_(Oh)→Co²⁺_(Oh). Co²⁺_(Oh) has great attraction to ethylbenzene, and weak interaction with O₂, which provide insufficient O₂ for gradual oxidation of phenylethanol to acetophenone. Combined with high energy barrier for forming phenylethanol, the direct oxidation path from ethylbenzene to acetophenone is kinetically favorable on mCo₃O₄, sharply contrasted to non-selective oxidation of ethylbenzene on commercial Co₃O₄.     

Atomic‐Scale Insights into Surface Lattice Oxygen Activation at the Spinel/Perovskite interface of Co3O4/La0.3Sr0.7CoO3

Surface lattice oxygen in transition‐metal oxides plays a vital role in catalytic processes. Mastering activation of surface lattice oxygen and identifying the activation mechanism are crucial for the development and design of advanced catalysts. A strategy is now developed to create a spinel Co₃O₄ /perovskite La_0.3Sr_0.7CoO₃ interface by in situ reconstruction of the surface Sr enrichment region in perovskite LSC to activate surface lattice oxygen. XAS and XPS confirm that the regulated chemical interface optimizes the hybridized orbital between Co 3d and O 2p and triggers more electrons in oxygen site of LSC transferred into lattice of Co₃O₄ , leading to more inactive O^2? transformed into active O^2?x. Furthermore, the activated Co₃O₄/LSC exhibits the best catalytic activities for CO oxidation, oxygen evolution, and oxygen reduction. This work would provide a fundamental understanding to explain the activation mechanism of surface oxygen sites.     

Zur Kristallstruktur von Ba3In2O6

About the Crystal Structure of Ba₃In₂O₆ Single crystals of Ba₃In₂O₆ could be prepared by recrystallization of a flux and by solid state reaction in closed platinium tubes, respectively. Ba₃In₂O₆ crystallizes with tetragonal symmetry (space group 14/mmm, a = 4.1868; c = 21.7041 Å, Z = 2). Single crystal X-ray work lead to a crystal structure like La_2-xSr_1+xCu₂O_6-δ therefor Ba₃In₂O₆ is a modified member of the Sr₃Ti₂O₇-Type. The coordinations of Ba²⁺ and In³⁺ are described and the relations to the Sr₃Ti₂O₇-type are discussed.     

The Solid-State-Grinding Synthesis of Maganese-Modified Cobalt Oxides and Application in the Low-Temperature CO Preferential Oxidation in H<Subscript>2</Subscript>-Rich Gases

A series of MnOx modified cobalt oxides with different atomic molar ratios of Mn/(Mn?+?Co) were prepared by a soft reactive grinding route and investigated for CO preferential oxidation in H₂. It was found that as-prepared Mn-doped cobalt oxides exhibited superior activity compared to the single constituted oxides, other Mn–Co–O mixed oxides synthesized by solution-based route, and other grinding-derived mixed metal oxides M–Co–O (M?=?Zn, Ni, Cu, Fe). The grinding-derived MnCo10 catalyst with Mn/(Mn?+?Co) molar ration of 10% showed the best CO oxidation activity and higher selectivity at low temperature. The surface richness of Co³⁺ was not found as increasing the Mn molar ratio in the present work. However, the incoporation of MnOx with proper amount into Co₃O₄ could produce high surface area, high structure defects, and rich surface active oxygen species, while the ability to supply the active oxygen species was suggested to play the crucial role in promoting the catalytic performance of Mn–Co–O mixed oxides.     

Identification of the Active Sites for Low Temperature CO Oxidation over Nanocrystalline Co3O4 Catalysts

The microstructural properties of dry‐grinding derived Co₃O₄ catalysts pretreated under different atmospheres, in relation to the activities on CO oxidation were investigated. The Co₃O₄ synthesized by soft reactive grinding and pretreated with O₂ resulted in the best activity, with 100% conversion of CO at ?52 °C, superior to that of Co₃O₄ pretreated with He. To find out the active sites on Co₃O₄ for low temperature CO oxidation, the characterizations of the cobalt oxides had been investigated by means of N₂ physisorption, XRD, TEM, H₂‐TPR, CO‐titration, XPS and O₂‐TPD technologies. XPS of Co2p results show that it is difficult to ascribe the difference in catalytic performance to the surface concentration of active Co³⁺ sites. A correlation between the activity and the CO‐titration and O₂‐TPD results for Co₃O₄ reveals that a high abundance of readily accessible superficial electrophilic oxygen (O^?) species is important for achieving a high activity. Therefore, CO oxidation takes place on the surface active oxygen sites in Co₃O₄ crystallites via the suprafacial mechanism.     

A novel In3O16 fragment in Cs3In3(PO4)4

The double phosphate Cs₃In₃(PO₄)₄, prepared by a flux technique, features a fragment of composition In₃O₁₆ formed by three corner‐sharing InO₆ polyhedra. The central In atom resides on a twofold rotation axis, while the other two In atoms are on general positions. The O atoms in this fragment also belong to PO₄ tetrahedra, which link the structure into an overall three‐dimensional anionic In–O–P network that is penetrated by tunnels running along c. Two independent Cs⁺ cations reside inside the tunnels, one of which sits on a centre of inversion. In general, the organization of the framework is similar to that of K₃In₃(PO₄)₄, which also contains an In₃O₁₆ fragment. However, in the latter case the unit consists of one InO₇ polyhedron and one InO₆ polyhedron sharing an edge, with a third InO₆ octahedron connected via a shared corner. Calculations of the Voronoi–Dirichlet polyhedra of the alkali metals give coordination schemes for Cs of [9+2] and [8+4] ( symmetry), and for K of [8+1], [7+2] and [7+2]. This structural analysis shows that the coordination requirements of the alkali metals residing inside the tunnels cause the difference in the In₃O₁₆ geometry.     

Structure Sensitivity of CO Oxidation on Co3O4: A DFT Study

The reaction mechanism of CO oxidation on the Co₃O₄ (110) and Co₃O₄ (111) surfaces is investigated by means of spin‐polarized density functional theory (DFT) within the GGA+U framework. Adsorption situation and complete reaction cycles for CO oxidation are clarified. The results indicate that 1) the U value can affect the calculated energetic result significantly, not only the absolute adsorption energy but also the trend in adsorption energy; 2) CO can directly react with surface lattice oxygen atoms (O_2f/O_3f) to form CO₂ via the Mars–van Krevelen reaction mechanism on both (110)‐B and (111)‐B; 3) pre‐adsorbed molecular O₂ can enhance CO oxidation through the channel in which it directly reacts with molecular CO to form CO₂ [O₂(a)+CO(g)→CO₂(g)+O(a)] on (110)‐A/(111)‐A; 4) CO oxidation is a structure‐sensitive reaction, and the activation energy of CO oxidation follows the order of Co₃O₄ (111)‐A(0.78 eV)>Co₃O₄ (111)‐B (0.68 eV)>Co₃O₄ (110)‐A (0.51 eV)>Co₃O₄ (110)‐B (0.41 eV), that is, the (110) surface shows higher reactivity for CO oxidation than the (111) surface; 5) in addition to the O_2f, it was also found that Co³⁺ is more active than Co²⁺, so both O_2f and Co³⁺ control the catalytic activity of CO oxidation on Co₃O₄, as opposed to a previous DFT study which concluded that either Co³⁺ or O_2f is the active site.     

Co3O4@CeO2 Core@Shell Cubes: Designed Synthesis and Optimization of Catalytic Properties

Mastery of nanomaterial structure enables the control of its properties to enhance its performance for a given application. Herein, we demonstrate a fast and facile self‐assembly method for the synthesis of a series of Co₃O₄@CeO₂ core@shell cubes, which are characterized by SEM, TEM, XRD, inductively coupled plasma mass spectrometry (ICP‐MS), and X‐ray photoelectron spectroscopy (XPS) analyses. The results indicate that the thickness of the CeO₂ shell can be tuned through simple variation of the feeding molar ratio of Ce/Co. These Co₃O₄@CeO₂ core@shell cubes are used for catalytic CO oxidation and show good catalytic properties. Moreover, the relationship between the catalytic performance and the CeO₂ shell thickness is studied in depth to optimize the catalytic properties.