Preparation of an Anti-Aggregation Silica/Zinc/Graphene Oxide Nanocomposite with Enhanced Adsorption Capacity

Nanomaterials play a significant role in adsorption treatment of dye wastewater, but irreversible aggregation of nanoparticles poses a significant problem. In this work, nanomesoporous zinc-doped silicate (NMSZ) was prepared by an in situ method. To prevent agglomeration, NMSZ was covalently bonded to graphene oxide (GO) sheets to form a nano-silica/zinc/graphene oxide composite (GO-NMSZ), aimed at removal of cationic dye methylene blue (MB). For comparison, undoped mesoporous silica (MS) was also synthesized and modified to obtain a silica/graphene oxide composite (GO-MS). The materials were characterized by powder XRD, SEM, FTIR spectroscopy, TEM, nitrogen sorption, and X-ray photoelectron spectroscopy (XPS). Preservation of the oxygen-containing groups of GO in the composites led to higher adsorption capacities. The best GO-NMSZ composite exhibited an enhanced adsorption capacity of 100.4 mg g⁻¹ for MB compared to those of undoped GO-MS (80.1 mg g⁻¹) and nongrafted NMSZ (55.7 mg g⁻¹). The nonselective character of GO-NMSZ is demonstrated by effective adsorption of anionic dye Congo red (127.4 mg g⁻¹) and neutral dye isatin (289.0 mg g⁻¹). The adsorption kinetics, adsorption isotherms, and a thermodynamic study suggested that MB adsorption occurs by chemisorption and is endothermic in nature.     

Application of Cu-based metal-organic framework (Cu-BDC) as a sorbent for dispersive solid-phase extraction of gallic acid from orange juice samples using HPLC-UV method

In the current work, the Cu-based metal-organic framework (MOF) (Cu-BDC) was synthesized through a simple and one-pot solvothermal method and used as a sorbent for dispersive solid-phase extraction (DSPE) of gallic acid (GA) from orange juice samples followed by high-performance liquid chromatography-ultraviolet (HPLC-UV) determination. The prepared Cu-BDC was fully characterized using different analysis including Fourier-transform infrared spectroscopy (FT-IR), X-ray Powder Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy-dispersive X-ray spectroscopy (EDS) and Brunauer-Emmett-Teller (BET). The prepared Cu-BDC had exceptional properties in terms of high specific surface area (400 m² g⁻¹) and high adsorption capacity (300 mg g⁻¹) toward GA. The influence of effective factors on extraction recovery of GA such as sorbent dosage, ultrasonic time, washing solvent volume and eluent solvent volume was evaluated using a central composite design (CCD) based response surface methodology (RSM). Under the optimized conditions, the presented method showed a wide linear range of 0.5–15.0 mg L⁻¹ with a detection limit of (0.145 mg L⁻¹) and acceptable repeatability (RSD < 6.0%) which shows the applicability of the proposed method for accurate determination of GA from complicated orange juice samples.     

Clay and charcoal composites: characterisation and application of factorial design analysis for dye adsorption

The characterisation of smectite clay, charcoal and prepared clay-charcoal composites was carried out through the X-ray diffractometry, energy dispersive X-ray spectroscopy (EDS), simultaneous thermal analysis (TGA/DTA), infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The analysis revealed the composites to have different characteristics from the precursor clay and charcoal, and a peak displacement (d ₀₀₁) was observed through the X-ray diffraction; this suggests the incorporation of charcoal into the clay lamellas and the formation of a new phase. Tests of adsorption with methylene blue dye were also carried out to evaluate the percentage of dye removal by the adsorbent, in which the composites presented better results than charcoal, indicating great potential for industrial use. A 2³ factorial design was employed to evaluate the influence of temperature, ionic strength and pH on the adsorption of methylene blue using the AV₅₀ composite that presented the best adsorption efficiency.     

Poly(hydroxyethyl methacrylate) membranes: as a hydrogel support for use in immobilized metal affinity chromatography

Lysozyme adsorption onto a dye ligand (Procion Red HE-3B) immobilized and Cu(II) incorporated poly(2-hydroxyethylmethacrylate) (pHEMA) membrane, were investigated. The membranes were prepared by UV initiated photopolymerization of HEMA in the presence of an initiator (α-α′-azoisobutyronitrile; AIBN). The amount of immobilized dye on the membrane was 112.2 μmol g⁻¹. Lysozyme adsorption on to these membranes from aqueous solutions containing different amounts of lysozyme at different pH was investigated in batch system. Lysozyme adsorption capacity of the dye-ligand immobilized membrane was 45.6 mg g⁻¹. Lysozyme adsorption capacity of the Cu(II) incorporated membranes (112.3 mg g⁻¹) was greater than that of the Procion Red HE-3B immobilized membranes. The non-specific adsorption of lysozyme on the pHEMA membranes was 0.14 mg g⁻¹. More than 97% of the adsorbed lysozyme were desorbed in 60 in the desorption medium containing 1.0 M KSCN at pH 8.0.     

Synthesis and characterization of CoFe2O4@SiO2-polyethyleneimine magnetic nanoparticle and its application for ultrasonic-assisted removal of disulfine blue dye from aqueous solution

In the present work, a simple synthesis approach was applied for the fabrication of CoFe₂O₄@SiO₂-polyethyleneimine magnetic nanoparticles as an effective sorbent for ultrasonic-assisted removal of disulfine blue dye from an aqueous solution. For identification and characterization of prepared sorbent, different analysis including Fourier transform infrared spectroscopy (FT-IR), Field emission scanning electron microscopy (FE-SEM), Vibrating sample magnetometer (VSM), Energy dispersive X-ray analysis (EDX) and Transmission electron microscopy (TEM) were applied. The effect of effective parameters on the removal of disulfine blue such as pH, sorbent mass, ultrasonic time and disulfine blue concentration were also assessed. The optimum values for investigated parameters were achieved to be as follows: pH of 5.0, sorbent mass of 0.015 g, ultrasonic time of 5.0 min and disulfine blue concentration of 10.0 mg L⁻¹. Different isotherm and kinetic models were used for the evaluation of isotherm and kinetic of adsorption. Results showed that the Langmuir isotherm model was better than other isotherm models as well as the second-order equation model was selected as a kinetic model. The maximum adsorption capacity of the proposed magnetic sorbent was achieved to be 110.0 mg g⁻¹ which shows the applicability of proposed sorbent for removal of disulfine blue dye from aqueous solution.     

Adsorption of anionic methyl orange dye by polyaniline,poly(o-methylaniline) and poly(o-methoxyaniline)

This study reports the effect of substituents in the ortho position of polyaniline on the adsorption capacity to remove the anionic dye methyl orange (MO) from an aqueous solution. The aim of this study is the synthesis of polyaniline (PANI) and its derivatives, poly-o-methylaniline (poly-o-toluidine, POT) and poly-o-methoxyaniline (poly-o-anisidine, POA) for the adsorption removal of MO dye. All polymers were obtained by oxidative polymerization of the corresponding monomers and characterized by scanning electron microscopy (SEM) and infrared spectroscopy (IR). The average particle size of the polymer was about 200 nm. The effect of various parameters such as pH, temperature, adsorption time and initial concentration was analyzed. It was found that the adsorption capacity for dye removal increases from 50.68 to 222.56 mg g⁻¹ for PANI, from 16.89 to 66.57 mg g⁻¹ for POT, and from 97.26 to 532.54 mg g⁻¹ for POA with an increase in the initial dye concentration from 5 up to 50 mg L⁻¹. For all polymers, the equilibrium state of MO adsorption was reached in 50 min. The results showed that MO adsorption on PANI, POT, and POA is well described by a pseudo second order kinetic model. Isothermal studies have shown that adsorption is in good agreement with the Langmuir isotherm model, as evidenced by higher values of correlation coefficients. Based on the data of thermodynamic studies, it was concluded that MO adsorption on PANI, POT, and POA is spontaneous and endothermic.     

Determination of catalyst metal residues in polymers by X-ray fluorescence

Commercial polyethylenes produced by Ziegler-Natta, Philips and metallocene technology were analyzed by X-ray fluorescence spectroscopy. Synthetic standards using wax matrix was shown to be suitable for the calibration curve in comparison to those prepared by milling and grinding virgin polymer mixed with standard metal oxide as matrix. The detection limits obtained for the studied metal in the different polymers were: 12 mg kg⁻¹ for Mg, 0.8 mg kg⁻¹ for Ti, 1.6 mg kg⁻¹ for Cr, 1.2 mg kg⁻¹ for Zr and 1.9 mg kg⁻¹ for V. For comparative reasons, the determination of residual metal content by Rutherford backscattering spectrometry (RBS) and total-reflection X-ray fluorescence spectrometry (TXRF) is also discussed.     

Raw and treated marble wastes reuse as low cost materials for phosphorus removal from aqueous solutions: Efficiencies and mechanisms

Phosphorus removal from synthetic solutions by raw and calcined powdered marble wastes (RPMW and CPMW) has been investigated in batch mode under different experimental conditions. The results showed that RPMW and CPMW have high removal efficiencies, especially in acidic media. The maximum phosphorus removal capacities were evaluated to 103.9 and 181.2 mg·g⁻¹ at an initial pH and an aqueous concentration of 5 and 350 mg·L⁻¹, respectively. Phosphorus removal by RPMW occurred mainly through adsorption. However, for CPMW, phosphorus was removed not only by adsorption, but also by precipitation as calcium phosphate complexes. Specific analyses using scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and Fourier transform infrared spectroscopy confirmed that this precipitate is most probably hydroxyapatite. On the other hand, CPMW have demonstrated an important ability in removing phosphorus from highly concentrated dairy wastewater (C_0,P = 1000 mg·L⁻¹) since only one dosage of 10 g·L⁻¹ was enough to ensure more than 97% of phosphorus removal.     

Facile and green synthesis of Cu3V2O8 nanostructures via Moringa peregrina natural extract as a high performance photo catalyst

In this paper Cu₃V₂O₈ nanoparicles were synthesized with a low-cost and green method with using the extract of Moringa peregrine. This novel synthesized material was characterized by using X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM) and Energy-dispersive X-ray spectroscopy (EDS) analysis. The analysis showed the produced nanoparticles have high purity and well crystalline structure. Moreover, the capability of the nanostructures for the removal of dye pollutants was evaluated. For this purpose, methylene blue was selected as a model of organic dye. The experiments showed Cu₃V₂O₈ nanoparticles have high efficiency for removing of dye molecules. Photocatalytic decolorization of methyl blue was optimized with varying the experiment conditions. With 0.02 g of catalyst, pH 6 and concentration of dye 30 mg/l removal efficiency was obtained about 90% in a short time 20 min. Also a kinetic study showed this photodegradation process obeys a first-order kinetic with rate constant about 0.07 min⁻¹.     

Purification of Papain Using Reactive Green 5 Attached Supermacroporous Monolithic Cryogel

Supermacroporous poly(2-hydroxyethyl methacrylate) [poly(HEMA)] monolithic cryogel was prepared by radical cryocopolymerization of HEMA with N,N??-methylene bisacrylamide as crosslinker. Reactive Green 5 dye was immobilized to the cryogel with nucleophilic substitution reaction, and this dye attached cryogel column was used for affinity purification of papain from Carica papaya latex. Reactive Green 5-immobilized poly(HEMA) cryogel was characterized by swelling studies, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy dispersive X-ray analysis. Maximum papain adsorption capacity was found to be 68.5?mg/g polymer while nonspecific papain adsorption onto plain cryogel was negligible (3.07?mg/g polymer). Papain from C. papaya was purified 42-fold in single step with dye attached cryogel, and purity of papain was shown by silver-stained sodium dodecyl sulfate?Cpolyacrylamide gel electrophoresis.     

Silver Nanoparticles Incorporated on Natural Clay as an Inhibitor against the New ISO SS Bacteria Isolated from Sewage Sludge,Involved in Malachite Green Dye Oxidation

A facile, ecofriendly, and cost-effective method was developed to prepare a microporous material based on natural chemically modified bentonite with silver ions (BN-Ag⁰). This material presents a good catalytic activity against Malachite Green (MG) dye and bacteriostatic activity against a newly isolated bacterium from sewage sludge named hereafter “ISO SS” and Escherichia coli (E. coli). BN-Ag⁰ was characterized by the following methods: energy-dispersive X-ray spectroscopy (EDX), scanning electron microscopy (SEM), Brunauer–Emmett–Teller (BET), Fourier-transform infrared (FTIR) spectroscopy, temperature programmed desorption (TPD) and X-ray Diffraction (XRD). The new bacterium ISO SS, was isolated using the technique of isolating a pure culture of anaerobically stabilized sludge. A mandatory characterization of ISO SS isolated strains from anaerobic stabilized sludge was performed in the process of identifying bacterial species. The cationic clay-based nanomaterial showed appreciable antibacterial activity against ISO SS, a Gram-negative bacterium. It also showed good activity against E. coli bacteria. As a catalyst in the catalytic ozonation of MG dye, BN-Ag⁰ significantly improves the oxidation time of the dye, due to its good adsorption and catalytic properties. The catalytic and antibacterial activities of the natural bentonite (BN) and of BN-Ag⁰ were examined using performant characterization techniques. The lifetime of the BN-Ag⁰ catalyst was also evaluated. Results obtained are expected to provide valuable findings for the preparation of a good microporous material with multiple functionalities.     

Novel reusable sulfate-type zirconium alginate ion-exchanger for fluoride removal

It is still a challenge to eliminate efficiently fluoride ion from groundwater, especially to design and synthesis an adsorbent possessing high adsorption capacity, recyclability and wide pH application conditions. Herein we present millimeter-sized sulfate-type zirconium alginate hydrogel beads with 3D network structure (AHB@Zr-SO₄²⁻) that exhibited a maximum adsorption capacity of 101.3 mg/g with wide pH applicability (pH 3−9). This material have ~2.5 times higher adsorption capacity than that of pure zirconium alginate hydrogel beads (AHB@Zr) and it was ascribed to ion exchange between SO₄²⁻ and F⁻ on the surface of AHB@Zr-SO₄²⁻, which was verified via ion chromatography measurement coupled with X-ray photoelectron spectroscopy (XPS) and Fourier Transform Infrared Spectrometer (FTIR Spectrometer) analysis. Density functional theory (DFT) calculations indicated that the ion exchange process between SO₄²⁻ and F⁻ in AHB@Zr-SO₄²⁻ was energetically favorable than OH⁻ and F⁻ in AHB@Zr. In addition, 310 bed volumes (BV) of effluent was realized via column adsorption of groundwater containing fluoride on AHB@Zr-SO₄²⁻ and indicated that it is a promising candidate for mitigating the problem of fluoride-containing groundwater.     

Studies on the synthesis of ETS-10 II. Use of organic templates

ETS-10 has been synthesized using titanosilicate gels and organic templating agents such as choline chloride [OHCH₂CH₂(CH₃)₃N⁺Cl⁻] and the bromide salt of hexaethyl diquat-5 [Br⁻(C₂H₅)₃N⁺(CH₂)₅N⁺(C₂H₅)₃Br⁻]. The influences of temperature and concentration of the ingredients on the kinetics of synthesis are reported. Physicochemical characterizations of the samples have been carried out by X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared (IR) spectroscopy, nuclear magnetic resonance (NMR) spectroscopy and differential thermogravimetric analysis (DTA)/thermogravimetric analysis (TGA), and adsorption of water, n-hexane and mesitylene. The catalytic activities of H-ETS-10 in the dehydration of n-butanol and in the isomerization of m-xylene and 1,3,5-trimethylbenzene are reported.     

Isotherms,kinetics, and thermodynamics of boron adsorption on fibrous polymeric chelator containing glycidol moiety optimized with response surface method

A fibrous boron chelator containing glycidol moiety (PE/PP-g-PVAm-G) was prepared by radiation induced grafting of N-vinylformamide (NVF) onto polyethylene/polypropylene (PE/PP) non-woven sheet followed by hydrolysis and immobilization of glycidol moiety. The glycidol density was controlled by optimization of the reaction parameters using the Box-Behnken design of response surface methodology (RSM). The properties of the PE/PP-g-PVAm-G were evaluated using Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FESEM) and energy dispersive x-ray (EDX) analysis, X-ray diffraction (XRD) and thermal gravimetric analysis (TGA). A maximum glycidol density yield of 5.0 mmol·g⁻¹ was obtained with 11.8 vol%, 78.9 °C and 109.4 min for glycidol concentration, reaction temperature and time, respectively. The isotherms, kinetics, and thermodynamic behavior of boron adsorption on the optimized chelator were investigated. The boron adsorption was pH-dependent and attained a maximum adsorption capacity of 25.7 mg·g⁻¹. The equilibrium isotherm proceeded by Redlich–Peterson model whereas the kinetics was best expressed by the pseudo-second-order equation. The thermodynamic analysis revealed that boron adsorption is endothermic and spontaneous. The fibrous chelator demonstrated high boron selectivity and strong resistance to foreign ions with uncompromised regeneration efficiency after five adsorption/desorption cycles. The PE/PP-g-PVAm-G chelator seems to be very promising for boron removal from aqueous media.     

Sargassum fusiforme Polysaccharide-Based Hydrogel Microspheres Enhance Crystal Violet Dye Adsorption Properties

In this study, a polysaccharide-based hydrogel microsphere (SFP/SA) was prepared using S. fusiforme polysaccharide (SFP) and sodium alginate (SA). Fourier transform infrared spectroscopy (FT-IR) demonstrated that SFP was effectively loaded onto the hydrogel microsphere. Texture profile analysis (TPA) and differential scanning calorimetry (DSC) showed that, with the increase of SFP concentration, the hardness of SFP/SA decreased, while the springiness and cohesiveness of SFP/SA increased, and the thermal stability of SFP/SA improved. The equilibrium adsorption capacity of SFP/SA increased from 8.20 mg/g (without SFP) to 67.95 mg/g (SFP accounted 80%) without swelling, and from 35.05 mg/g (without SFP) to 81.98 mg/g (SFP accounted 80%) after 24 h swelling. The adsorption of crystal violet (CV) dye by SFP/SA followed pseudo-first order and pseudo-second order kinetics (both with R² > 0.99). The diffusion of intraparticle in CV dye was not the only influencing factor. Moreover, the adsorption of CV dye for SFP/SA (SFP accounted 60%) fit the Langmuir and Temkin isotherm models. SFP/SA exhibited good regenerative adsorption capacity. Its adsorption rate remained at > 97% at the 10th consecutive cycle while SFP accounted for 80%. The results showed that the addition of Sargassum fusiforme polysaccharide could increase the springiness, cohesiveness and thermal stability of the hydrogel microsphere, as well as improve the adsorption capacity of crystal violet dye.     

Lanthanum ion–impregnated granular activated carbon for the removal of phenol from aqueous solution: Equilibrium and kinetic study

The current study discusses application of the lanthanum ions (La³⁺) as an activating agent incorporated /immobilized into coconut shell–based granular activated carbon (GAC) for porosity development; subsequently, the carbon material is used for the adsorption of phenol from aqueous solutions. The new carbons were characterized using FTIR, XRD, CHNO, burn off, and carbon yield. The surface functional groups were determined by Boehm titration. The Brunauer–Emmett–Teller (BET) surface area of the carbons is 953 m² g⁻¹ (GACLa1073), 997 m² g⁻¹ (GAC383), and 973 m² g⁻¹ (GACO383). Langmuir, Freundlich, Dubinin–Radushkevich, and John–Sivanandan Achari (J-SA) isotherm models on the equilibrium isotherm data were examined for the new carbon-phenol system. It is found that the Langmuir isotherm fits better with a monolayer adsorption capacity, highest for GACLa1073 (387.59 mg g⁻¹) followed by GAC383 (303.03 mg g⁻¹) and GACO383 (197.62 mg g⁻¹). Kinetic studies reveal that the adsorption system follows the pseudo–second-order kinetic model. Isotherm analysis by the phase change method of John-Sivanandan Achari (J-SA) isotherm gives a better insight into adsorption phenomena, which is accompanied by regeneration studies of carbon with >75% for GACLa1073 after three cycles.     

Cost-effective and Facile Production of a Phosphorus-doped Graphite Electrode for the Electrochemical Determination of Pyridoxine

In this study; a sensitive, selective, and simple electrochemical sensor was developed to determine low concentration pyridoxine (Py) using a phosphorus-doped pencil graphite electrode (P-doped/PGE). Electrode modification was implemented using the chronoamperometry method at +2.0 V constant potential and 100 seconds in 0.1 mol L⁻¹ H₃PO₄ supporting electrolyte solution. The characterization processes of the P-doped/PGE were carried out using electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectroscopy (EDX), and atomic force microscope (AFM) methods. In the concentration study, using the differential pulse voltammetry (DPV) method, a linear calibration plot was acquired in the concentration range of 0.5 to 300 μmol L⁻¹ Py. The limit of quantification (LOQ) and limit of detection (LOD) of the developed method were calculated as 0.219 μmol L⁻¹ and 0.0656 μmol L⁻¹, respectively. Detection of Py has been successfully performed on the P-doped/PGE in the beverage samples. As a result, the method developed has been shown to have fast, low cost, and simple for the sensitive and selective detection of Py as an effective electrode.     

Synthesis of EDTA-modified magnetic activated carbon nanocomposite for removal of permanganate from aqueous solutions

In this study, activated carbon particles were magnetized by different amounts of maghemite in different temperatures using co-precipitation method and the resultant nanocomposite were modified with ethylenediaminetetraacetic acid (EDTA) to increase the permanganate contaminants adsorption capacity and to prevent degradation and oxidation of maghemite nanoparticles. Various properties of nanocomposite were investigated using different techniques including, vibrating sample magnetometer, scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectrometer. Different kinetics, isotherms and thermodynamic models of adsorption process were investigated. Comparing data with kinetic models showed that the adsorption process complies with the pseudo-second-order kinetic model. The study of equilibrium isotherms data at different temperatures indicated that the adsorption process is more compatible with Langmuir model. Negative values of ΔG and positive values of ΔH revealed that adsorption process is spontaneous and endothermic. Response surface methodology was used to determine optimal parameters of an adsorbent dose of 1 g L⁻¹, pH = 2 and initial permanganate concentration of 50 mg L⁻¹, according to which, the maximum capacity of permanganate adsorption obtained under optimal conditions was 93.86 mg g⁻¹.     

Optimized adsorption and effective disposal of Congo red dye from wastewater: Hydrothermal fabrication of MgAl-LDH nanohydrotalcite-like materials

The effectiveness of Congo red (CR) adsorption from aqueous solutions onto MgAl-layered double hydroxide (MgAl-LDH) nanosorbents was examined in this study. MgAl-LDH was synthesized using the hydrothermal method, and physicochemical characterization was performed via powdered X-ray diffraction, high-resolution transmission electron microscopy, Fourier transform infrared analysis, and zeta potential measurements. For optimum adsorption of CR onto the synthesized MgAl-LDH nanosorbent, the adsorption process was employed in batch experiments. Adsorption parameters, such as the adsorbent dosage, solution pH, contact time, and initial adsorbate concentration, vary with the adsorption kinetics and isotherm mechanism. The results of the batch experiments indicated rapid adsorption of CR dye from aqueous solutions onto MgAl-LDH during the first 30 min until equilibrium was achieved at 180 min with a dye concentration of 50 mg/100 mL and MgAl-LDH adsorbent dosage of 0.05 g. The experimental adsorption data fit adequately with the monolayer coverage under the Langmuir isotherm model (R² = 0.9792), and showed the best fit with the pseudo-second-order kinetic model (R² = 0.996). The change in zeta potential confirmed the effective adsorption interaction between the positively charged MgAl-LDH and the negatively charged CR molecules with electrostatic interactions. This work is distinguished by the successful hydrothermal preparation of MgAl-LDH in the form of homogenous nanoscale particles (～100 nm). The prepared MgAl-LDH showed a high adsorption capacity toward anionic CR dye with a maximum adsorption capacity of 769.23 mg/g. This capacity is higher than those reported for other adsorbents in previous research.     

Adsorption of crystal violet dye from aqueous solution using mesoporous materials synthesized at room temperature

In this work, batch adsorption experiments are carried out for crystal violet dye using mesoporous MCM-41 synthesized at room temperature and sulfate modified MCM-41 prepared by impregnation method using H₂SO₄ as sulfatising agent. The surface characteristics, pore structure, bonding behavior and thermal degradation of both the MCM-41 samples are characterized by nitrogen adsorption/desorption isotherms, X-ray diffraction (XRD) patterns, Fourier transform infrared (FT-IR) spectroscopy and thermo gravimetric analysis (TGA). The adsorption isotherm, kinetics and thermodynamic parameters are investigated for crystal violet (CV) dye using the calcined and sulfated MCM-41. Results are analysed using Langmuir, Freundlich and Redlich-Peterson isotherm models. It is found that the Freundlich model is an appropriate model to explain the adsorption isotherm. The highest adsorption capacity achieved is found to be 3.4×10⁻⁴ mol g⁻¹ for the sulfated MCM-41. The percentage removal of crystal violet dye increases with increase in the pH for both the MCM-41 adsorbents. Kinetics of adsorption is found to follow the second-order rate equation. From the thermodynamic investigation, it is evident that the adsorption is exothermic in nature.