Radical-initiated homo- and copolymerization of α-methylene-γ-butyrolactone

The kinetics of α-methylene-γ-butyrolactone (α-MBL) homopolymerization was investigated in N,N-dimethylformamide (DMF) with azobis(isobutyronitrile) as initiator. The rate of polymerization (R_p) was expresed by R_p = k[AIBN]^0.54[α-MBL]^1.1 and the overall activation energy was calculated as 76.1 kJ/mol. Kinetic constants for α-MBL polymerization were obtained as follows: k_p/k_t^1/2 = 0.161 L^1/2 mol^?1/2·s^?1/2; 2fk_d = 2.18 × 10^?5 s^?1. The relative reactivity ratios of α-MBL(M₂) copolymerization with styrene (r₁ = 0.14, r₂ = 0.87) were obtained. Applying the Q–e scheme led to Q = 2.2 and e = 0.65. These Q and e values for α-MBL are higher than those for MMA     

Kinetics,Mechanism, and Rheological Properties of the Copolymers of 2-Ethylhexylacrylate and Styrene

Abstract

Copolymerization of 2-ethylhexylacrylate (2-EHA) and styrene (Sty) initiated by α,α′-azobisisobutyronitrile (AIBN) was carried out at 60, 65, and 70 ± 0.1°C in bulk in the presence of zinc chloride (ZnCl₂). R _p was a direct function of [ZnCl₂] and temperature. R _p showed an initial increase with [monomers] followed by a subsequent decrease after a maximum was reached. The accelerating effect of ZnCl₂ was predicted by a lowering of the activation energy from 42.78 to 34.38 kJ·mol^?1 and an increase in the specific rate constants ratio (k ² _p/k _t) from 4.64 to 5.83 L·mol^?1·s^?1. The product of the reactivity ratios of the two monomers was 0.018 and 0.648, favoring alternating and random copolymer structures, respectively. The copolymerization reaction mechanism was a radical complex. Rheological investigations favored Bingham and Ostwald models for the flow behaviors of alternating and random copolymers, respectively.     

On the Ambiphilic Reactivity of Geometrically Constrained Phosphorus(III) and Arsenic(III) Compounds: Insights into Their Interaction with Ionic Substrates

The ambiphilic nature of geometrically constrained Group 15 complexes bearing the N,N‐bis(3,5‐di‐tert‐butyl‐2‐phenolate)amide pincer ligand (ONO^3?) is explored. Despite their differing reactivity towards nucleophilic substrates with polarised element–hydrogen bonds (e.g., NH₃), both the phosphorus(III), P(ONO) ( 1 a ), and arsenic(III), As(ONO) ( 1 b ), compounds exhibit similar reactivity towards charged nucleophiles and electrophiles. Reactions of 1 a and 1 b with KOtBu or KNPh₂ afford anionic complexes in which the nucleophilic anion associates with the pnictogen centre ([(tBuO)Pn(ONO)]^? (Pn=P ( 2 a ), As ( 2 b )) and [(Ph₂N)Pn(ONO)]^? (Pn=P ( 3 a ), As ( 3 b )). Compound 2 a can subsequently be reacted with a proton source or benzylbromide to afford the phosphorus(V) compounds (tBuO)HP(ONO) ( 4 a ) and (tBuO)BzP(ONO) ( 5 a ), respectively, whereas analogous arsenic(V) compounds are inaccessible. Electrophilic substrates, such as HOTf and MeOTf, preferentially associate with the nitrogen atom of the ligand backbone of both 1 a and 1 b , giving rise to cationic species that can be rationalised as either ammonium salts or as amine‐stabilised phosphenium or arsenium complexes ([Pn{ON(H)O}]⁺ (Pn=P ( 6 a ), As ( 6 b )) and [Pn{ON(Me)O}]⁺ (Pn=P ( 7 a ), As ( 7 b )). Reaction of 1 a with an acid bearing a nucleophilic counteranion (such as HCl) gives rise to a phosphorus(V) compound HPCl(ONO) ( 8 a ), whereas the analogous reaction with 1 b results in the addition of HCl across one of the As?O bonds to afford ClAs{(H)ONO} ( 8 b ). Functionalisation at both the pnictogen centre and the ligand backbone is also possible by reaction of 7 a / 7 b with KOtBu, which affords the neutral species (tBuO)Pn{ON(Me)O} (Pn=P ( 9 a ), As ( 9 b )). The ambiphilic reactivity of these geometrically constrained complexes allows some insight into the mechanism of reactivity of 1 a towards small molecules, such as ammonia and water.     

Polymerization of α-methylene-N-methylpyrrolidone

α-Methylene-N-methylpyrrolidone (α-MMP) was synthesized and homopolymerized by bulk and solution methods. The poly(α-MMP) is readily soluble in water, methanol, methylene chloride, and dipolar aprotic solvents at room temperature. Thermogravimetric analysis of poly(α-MMP) showed a 10% weight loss at 330°C in air. The kinetics of α-MMP homopolymerization and copolymerization were investigated in acetonitrile, using azobisisobutyronitrile (AIBN) as an initiator. The rate of polymerization R_p could be expresed by R_p = k[AIBN]^0.49[α-MMP]^1.3. The overall activation energy was calculated to be 84.1 kj/mol. The relative reactivity ratios of α-MMP (M₂) copolymerization with methyl methacrylate (r₁ = 0.59, r₂ = 0.26) in acetonitrile were obtained. Applying the Q-e scheme led to Q = 2.18 and e = 1.77. These Q and e values are larger than those for acrylamide derivatives.     

New sources of “active” halogen bis(dialkylamide)hydrogen dibromobromates, efficient reagents for destruction of ecotoxicants

Bis(dialkylamide)hydrogen dibromobromates were synthesized and their reactivity was investigated in decomposition of diethylphosphonic, diethylphosphoric, and 4-toluenesulfonic acids 4-nitrophenyl esters. The nucleophilic reactivity of a typical α-nucleophile, hypobromite ion, is independent of the source of the active bromine. The cetyltrimethylammonium dibromobromate is a unique reagent for destruction of ecotoxicants. In weakly alkaline media the half-life of 4-nitrophenyl diethylphosphonate did not exceed 6 s at [BrO^?] 0.02 mol l^?1, and the apparent reaction rate compared to water increased ～40-fold. The main factor governing the micellar effects of surfactants is concentrating the substrate in the micellar pseudophase.     

Micelle Effects of Functionalized Surfactants, 1-Cetyl-3-(2-hydroxyiminopropyl)imidazolium Halides,in Reactions with p-Nitrophenyl p-Toluenesulfonate,Diethyl p-Nitrophenyl Phosphate,and Ethyl p-Nitrophenyl Ethylphosphonate

1-Cetyl-3-(2-hydroxyiminopropyl)imidazolium chloride and bromide were synthesized for the first time. These compounds are functionalized zwitterionic surfactants which give rise to micelle formation in aqueous solution. Kinetic and thermodynamic analysis of nucleophilic cleavage of p-nitrophenyl p-toluenesulfonate, diethyl p-nitrophenyl phosphate, and ethyl p-nitrophenyl ethylphosphonate in the presence of 1-cetyl-3-(2-hydroxyiminopropyl)imidazolium halide micelles showed that the latter are powerful nucleophilic reagents whose kinetic behavior can be described in terms of a simple pseudophase distribution model. The efficiency of substrate solubilization with zwitterionic surfactant micelles and the reactivity of the oximate fragment in the micelle phase were estimated on a quantitative level. The observed acceleration of S_N2 reactions with the examined p-nitrophenyl esters relative to analogous reactions of zwitterionic 1-methyl-3-(2-hydroxyiminopropyl)imidazolium halides is, respectively, 12800, 550, and 900 times; it is explained mainly by increased concentration of the reactants in micelles.     

Reactivity of methacrylates in anionic copolymerization with methyl methacrylate by n-BuLi

Monomer reactivity ratios, r₁ and r₂ were determined in the anionic copolymerizations of methyl methacrylate (MMA, M₁) with ethyl (EtMA), isopropyl (i-PrMA), tert-butyl (t-BuMA), benzyl (BzMA), α-methylbenzyl (MBMA), diphenylmethyl (DPMMA), α,α-dimethylbenzyl (DMBMA), and trityl (TrMA) methacrylates (M₂) by use of n-BuLi as an initiator in toluene and THF at -78°C. The order of the reactivity of the monomers towards MMA anion was DPMMA > BzMA > MMA > EtMA > MBMA > i-PrMA > t-BuMA > TrMA > DMBMA in toluene and TrMA > BzMA > MMA > DPMMA > EtMA > MBMA > i-PrMA > DMBMA > t-BuMA in THF. Except for the extremely low reactivity of TrMA and DPMMA in toluene due to steric hindrance, the order was explained in terms of the polar effect of the ester groups. A linear relationship was found between log (1/r₁) and Taft's σ* values of the ester groups, where the ρ* value was 1.1. The plots of log (1/r₁) vs. the ¹H_a (cis to the carbonyl) and ¹³C_ß chemical shifts of the monomers were also on straight lines. The polymer obtained in the copolymerization of MMA with TrMA in toluene by n-BuLi at -78°C was a mixture of poly-MMA and a copolymer, suggesting that there exist two kinds of growing centers.     

Radical polymerization of N-phenyl-α-methylene-β-lactam

N-phenyl-α-methylene-β-lactam (PML), a cyclic analog of N,N-disubstituted methacrylamides which do not undergo radical homopolymerization, was synthesized and polymerized with α,α′-azobis (isobutyronitrile) (AIBN) in solution. Poly (PML) (PPML) is readily soluble in tetrahydrofuran, chloroform, pyridine, and polar aprotic solvents but insoluble in toluene, ethyl acetate, and methanol. PPML obtained by radical initiation is highly syndiotactic (rr = 92%), exhibits a glass transition at 180°C, and loses no weight upto 330°C in nitrogen. The kinetics of PML homo-polymerization with AIBN was investigated in N-methyl-2-pyrrolidone. The rate of polymerization (R_p) can be expressed by R_p = k[AIBN]^0.55[PML]^1.2 and the overall activation energy has been calculated to be 87.3 kJ/mol. Monomer reactivity ratios in copolymerization of PML (M₂) with styrene (M₁) are r₁ = 0.67 and r₂ = 0.41, from which Q and e values of PML are calculated as 0.60 and 0.33, respectively.     

Supernucleophilic Reactivity of Hypobromite Ion toward 4-Nitrophenyl Diethylphosphonate in Water and Micelles of Cetyltrimethylammonium Bromide

The nucleophilic reactivity of the typical -nucleophile hypobromite ion, generated by the organic complexes of the tribromide ion, toward 4-nitrophenyl diethylphosphonate in water and micelles of cetyltrimethylammonium bromide (CTAB) was studied. The BrO^––CTAB system is one of the most effective for the decomposition of organophosphorus compounds; the concentrating effect of the reagents secures the rapid break down of 4-nitrophenyl diethylphosphonate in an aqueous–micellar medium with t _1/2 20 s (in water t _1/2 600 s).Yu. S. Simanenko: Deceased     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Radical polymerization of 3-methylene-5,5′-dimethyl-2-pyrrolidinone: A cyclic analog of N-substituted methacrylamide

3-Methylene-5,5′-dimethyl-2-pyrrolidinone (α-MDMP), a cyclic analog of N-substituted methacrylamide, was synthesized and polymerized with α,α′-azobis (isobutyronitrile) (AIBN) in solution. Poly(α-MDMP) is only soluble in dimethyl sulfoxide (DMSO) at room temperature. Thermogravimetry of poly(α-MDMP) showed 10% weight loss at 355°C in air and 400°C under nitrogen, respectively. The kinetics of α-MDMP homopolymerization with AIBN was investigated in DMSO. The rate of polymerization (R_p) can be expressed by R_p = k[AIBN]^0.49[α-MDMP]^1.0 and the overall activation energy has been calculated to be 73.2 kJ/mol. Monomer reactivity ratios in copolymerization of α-MDMP (M₂) with methyl methacrylate (M₁) are r₁ = 0.71 and r₂ = 0.71, from which Q and e values of α-MDMP are calculated as 0.75 and -0.43, respectively. © 1993 John Wiley & Sons, Inc.     

Intermolecular insertion of an N,N-heterocyclic carbene into a nonacidic C-H bond: Kinetics, mechanism and catalysis by (K-HMDS)2 (HMDS = Hexamethyldisilazide)

The reaction of 2‐[¹³C]‐1‐ethyl‐3‐isopropyl‐3,4,5,6‐tetrahydropyrimidin‐1‐ium hexafluorophosphate ([¹³C₁]‐ 1 ‐PF₆) with a slight excess (1.03 equiv) of dimeric potassium hexamethyldisilazide (“(K‐HMDS)₂”) in toluene generates 2‐[¹³C]‐3‐ethyl‐1‐isopropyl‐3,4,5,6‐tetrahydropyrimid‐2‐ylidene ([¹³C₁]‐ 2 ). The hindered meta‐stable N,N‐heterocyclic carbene [¹³C₁]‐ 2 thus generated undergoes a slow but quantitative reaction with toluene (the solvent) to generate the aminal 2‐[¹³C]‐2‐benzyl‐3‐ethyl‐1‐isopropylhexahydropyrimidine ([¹³C₁]‐ 14 ) through formal C? H insertion of C(2) (the “carbene carbon”) at the toluene methyl group. Despite a significant pK_a mismatch (ΔpK_a 1 ⁺ and toluene estimated to be ca. 16 in DMSO) the reaction shows all the characteristics of a deprotonation mechanism, the reaction rate being strongly dependent on the toluene para substituent (ρ=4.8(±0.3)), and displaying substantial and rate‐limiting primary (k_H/k_D=4.2(±0.6)) and secondary (k_H/k_D=1.18(±0.08)) kinetic isotope effects on the deuteration of the toluene methyl group. The reaction is catalysed by K‐HMDS, but proceeds without cross over between toluene methyl protons and does not involve an HMDS anion acting as base to generate a benzyl anion. Detailed analysis of the reaction kinetics/kinetic isotope effects demonstrates that a pseudo‐first‐order decay in 2 arises from a first‐order dependence on 2 , a first‐order dependence on toluene (in large excess) and, in the catalytic manifold, a complex noninteger dependence on the K‐HMDS dimer. The rate is not satisfactorily predicted by equations based on the Brønsted salt‐effect catalysis law. However, the rate can be satisfactorily predicted by a mole‐fraction‐weighted net rate constant: ?d[ 2 ]/dt=({x ₂ k_uncat}+{(1?x ₂ ) k_cat})[ 2 ]¹[toluene]¹, in which x ₂ is determined by a standard bimolecular complexation equilibrium term. The association constant (K_a) for rapid equilibrium–complexation of 2 with (K‐HMDS)₂ to form [ 2 (K‐HMDS)₂] is extracted by nonlinear regression of the ¹³C NMR shift of C(2) in [¹³C₁]‐ 2 versus [(K‐HMDS)₂] yielding: K_a=62(±7) M ^?1; δ_C(2) in 2 =237.0 ppm; δ_C(2) in [ 2 (K‐HMDS)₂]=226.8 ppm. It is thus concluded that there is discrete, albeit inefficient, molecular catalysis through the 1:1 carbene/(K‐HMDS)₂ complex [ 2 (K‐HMDS)₂], which is found to react with toluene more rapidly than free 2 by a factor of 3.4 (=k_cat/k_uncat). The greater reactivity of the complex [ 2 (K‐HMDS)₂] over the free carbene ( 2 ) may arise from local Brønsted salt‐effect catalysis by the (K‐HMDS)₂ liberated in the solvent cage upon reaction with toluene.     

Radical-initiated homopolymerization and copolymerization of ethyl α-hydroxymethylacrylate

Ethyl α-hydroxymethylacrylate (EHMA) was synthesized and homopolymerized in bulk and in solution. The poly(EHMA) is readily soluble in alcohol, acetone, tetrahydrofuran, and methylene chloride at room temperature. Intramolecular lactone formation occurred when poly(EHMA) was heated to 180–230°C. The kinetics of EHMA homopolymerization was investigated in ethyl acetate, using α,α′-azobisisobutylonitrile as an initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.50[EHMA]^1.4 and the overall activation energy was calculated as 71.9 kJ/mol. Kinetic constants for EHMA polymerization were obtained as follows: k_p/k = 0.17L^0.9mol^?0.9s^?0.5; 2fk_d = 1.5 × 10^?5 s^?1. The relative reactivity ratios of EHMA(M₂) copolymerization with styrene (r₁ = 0.472, r₂ = 0.564) in ethyl acetate were obtained. Applying the Q-e scheme led to Q = 0.84 and e = 0.35 for EHMA.     

Preparation of amphiphilic organoiron(1+) complexes having two long-chain alkyl groups and their molecular assemblage characteristics

[o-, m- and p-Bis(alkylamino or alkyloxy)benzene] (cyclopentadienyl)iron(1+) hexafluorophosphates {2 and 4; [(C_nH_2n+1X)₂C₆H₄](C₅H₅)Fe⁺PF₆^?, X?NH or O} were prepared by aromatic nucleophilic substitution of the (dichlorobenzene)iron cationic complexes (1). Critical micelle concentrations of the complex chlorides (3), prepared from 2 (n=8, X?NH) by anion exchange and soluble in water, gave much smaller values than those of bis(long-chain alkyl)dimethylammonium surfactants. Furthermore, the substitution positions scarcely affected their surface activites. However, the surface pressure-molecular area isotherm of the hexafluorophosphates (2 and 4, n=18, X?NH; insoluble in water) were severely transformed by change in the substitution position of the long-chain alkyl groups on the benzene ligand in the iron cationic complexes: the o-substituted complex gave a molecularly assembled film by the Langmuir-Blodgett (LB) method, but the P-substituted one did not.     

Synthesis,crystal structure and non-linear optical properties of a new cyanide-containing compound

Reaction of K₃[Fe(CN)₆], NiCl₂ and diethylenetriamine (dien) resulted in the formation of a cyanide-containing heterometallic compound [Ni(dien)₂]₂[Fe(CN)₆]·4H₂O 1. The structure consists of two octahedral [Ni(dien)₂]²⁺ cations, one octahedral [Fe(CN)₆]^4? anion and four crystallization water molecules, which are held together by hydrogen-bonding interactions. Its TG curve exhibits two stages of mass loss. Compound 1 in DMF solutions has a very strong third-order non-linear optical (NLO) behavior with an absorption coefficient and refractive index α₂?=?1.10?×?10^?11?m?w^?1, n ₂?=??3.05?×?10^?19?m²?w^?1, respectively, and third-order NLO susceptibility χ⁽³⁾ 4.34?×?10^?13?esu.     

Absolute Rate Constants for the Addition of Benzyl (PhĊH2) and Cumyl (PhĊMe2) Radicals to Alkenes in Solution

Absolute rate constants and their temperature dependence were determined by time-resolved electron spin resonance for the addition of the radicals Ph?H₂ and Ph?Me₂ to a variety of alkenes in toluene solution. To vinyl monomers CH₂=CXY, Ph?H₂ adds at the unsubstituted C-atom with rate constants ranging from 14 M ^?1S ^?1 (ethoxyethene) to 6.7 · 10³ M ^?1S ^?1 (4-vinylpyridine) at 296 K, and the frequency factors are in the narrow range of log (A/M ^?1S ^?1) = 8.6 ± 0.3, whereas the activation energy varies with the substituents from ca. 51 kJ/mol to ca. 26 kJ/mol. The rate constants and the activation energies increase both with increasing exothermicity of the reaction and with increasing electron affinity of the alkenes and are mainly controlled by the reaction enthalpy, but are markedly influenced also by nucleophilic polar effects for electron-deficient substrates. For 1,2-disubstituted and trisubstituted alkenes, the rate constants are affected by additional steric substituent effects. To acrylate and styrenes, Ph?Me₂ adds with rate constants similar to those of Ph?H₂, and the reactivity is controlled by the same factors. A comparison with relative-rate data shows that reaction enthalpy and polar effects also dominate the copolymerization behavior of the styrene propagation radical.     

Dilatometric constant for polymerization of α-methylstyrene

By measurement of the specific volume of solutions of poly-α-methylstyrene in α-methylstyrene monomer at 25°C, the dilatometric constant was found to be K_D = (0.002007 ± 0.000030)%^?1. Estimation of the temperature dependence resulted in the equation (K_D)_t = 1.81 × 10^?3 + 7.82 + 10^?6 t, where t denotes temperature in °C.     

Synthese von rac-threo und rac-erythro-α-(2, 2-Dichloracetamido)-β-hydroxy-p-nitrohydrozimtaldehyd

rac-threo-α-(2, 2-Dichloroacetamido)-β-hydroxy-p-nitrohydrocinnamaldehyde (3) and rac-erythro-α-(2, 2-dichloroacetamido)-β-hydroxy-p-nitrohydrocinnamaldehyde (4) were synthesized starting from α-acetamido-p-nitroacetophenone (7) , and their structures were proved b^n? reduction to rac-chloramphenicol (19) and rac-erythro-2-(2, 2-dichloroacetamido)-1-(p-nitrophenyl)^v 1, 3-propanediol (14) respectively. 3 exhibited only low antibacterial activity compared to rac-chloramphenicol (19) .     

Kinetic and Mechanisms of the Homogeneous,Unimolecular Elimination of Phenyl Chloroformate and p‐Tolyl Chloroformate in the Gas Phase

The gas‐phase elimination of phenyl chloroformate gives chlorobenzene, 2‐chlorophenol, CO₂, and CO, whereasp‐tolyl chloroformate produces p‐chlorotoluene and 2‐chloro‐4‐methylphenol CO₂ and CO. The kinetic determination of phenyl chloroformate (440–480^oC, 60–110 Torr) and p‐tolyl chloroformate (430–480°C, 60–137 Torr) carried out in a deactivated static vessel, with the free radical inhibitor toluene always present, is homogeneous, unimolecular and follows a first‐order rate law. The rate coefficient is expressed by the following Arrhenius equations: Phenyl chloroformate: Formation of chlorobenzene, log k_I = (14.85 ± 0.38) – (260.4 ± 5.4) kJ mol^?1 (2.303RT)^?1; r = 0.9993 Formation of 2‐chlorophenol, log k_II = (12.76 ± 0.40) – (237.4 ± 5.6) kJ mol^?1(2.303RT)^?1; r = 0.9993 p‐Tolyl chloroformate: Formation of p‐chlorotoluene: log k_I = (14.35 ± 0.28) – (252.0 ± 1.5) kJ mol^–1 (2.303RT)^?1; r = 0.9993 Formation of 2‐chloro‐4‐methylphenol, log k_II = (12.81 ± 0.16) – (222.2 ± 0.9) kJ mol^?1(2.303RT)^–1; r = 0.9995 The estimation of the k_I values, which is the decarboxylation process in both substrates, suggests a mechanism involving an intramolecular nucleophilic displacement of the chlorine atom through a semipolar, concerted four‐membered cyclic transition state structure; whereas the k_II values, the decarbonylation in both substrates, imply an unusual migration of the chlorine atom to the aromatic ring through a semipolar, concerted five‐membered cyclic transition state type of mechanism. The bond polarization of the C–Cl, in the sense C^{δ+ …} Cl^δ?, appears to be the rate‐determining step of these elimination reactions.     

Generation and EPR Spectroscopy of the First Silenyl Radicals,R2C=Si.−R: Experiment and Theory

The first two persistent silenyl radicals (R₂C=Si^.?R), with a half‐life (t_1/2) of about 30 min, were generated and characterized by electron paramagnetic resonance (EPR) spectroscopy. The large hyperfine coupling constants (hfccs) (a(²⁹Si_α)=137.5–148.0 G) indicate that the unpaired electron has substantial s character. DFT calculations, which are in good agreement with the experimentally observed hfccs, predict a strongly bent structure (?C=Si?R=134.7–140.7°). In contrast, the analogous vinyl radical, R₂C=C^.?R (t_1/2≈3 h), exhibits a small hfcc (a(¹³C_α)=26.6 G) and has a nearly linear geometry (?C=C?R=168.7°).