一种基于硫杂杯[4]芳烃的高效银离子载体

合成了基于下缘含有酰肼基团的硫杂杯芳烃衍生物的银离子载体1,其核磁研究证实硫杂杯芳烃以1,3-交替构象存在,并且通过非竞争萃取实验和竞争萃取实验研究了它对碱金属和过渡金属离子（Li⁺, Na⁺, K⁺, Cs⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Ag⁺）的键合能力和选择性。实验结果表明：将酰肼基团引入1,3-交替构象的硫杂杯芳烃骨架的下缘可以提高其对Ag⁺的键合能力和选择性,同时,对Cu²⁺的萃取能力较弱,对碱金属离子和其它的重金属离子几乎没有萃取能力。进一步的核磁滴定和电喷雾质谱实验显示化合物1与银离子形成配合物的配合计量比为1：1,由此推断主要由“N-Ag⁺”配位键以及硫杂杯芳烃骨架的协同作用构成了化合物1与银离子的配合模式。     

A Water-Soluble Peptoid that Can Extract Cu2+ from Metallothionein via Selective Recognition

Selective binding of Cu²⁺ in water medium by a synthetic chelator is a promising therapeutic approach towards the treatment of various diseases including cancer. Chelation of Cu²⁺ is well exercised, however water-soluble synthetic chelators that can selectively bind Cu²⁺ from a pool of competing metal ions at very high excess and/or can extract Cu²⁺ from a protein are hardly reported. Herein we describe the design and synthesis of an acetylated peptoid—N-substituted glycine trimer—that incorporates a picolyl group at the N-terminal, a non-coordinating but structurally directing bulky chiral phenylethyl group at the C-terminus and a modified 2,2′-bipyridine group ( PCA-Nspe ), which selectively binds Cu²⁺ to form a water-soluble complex. We further demonstrate that the selectivity of PCA-Nspe to Cu²⁺ is thermodynamically driven, leading to specific binding of Cu²⁺ in an aqueous solution containing up to 60-fold excess of other biologically relevant metal ions such as Zn²⁺, Co²⁺, Mn²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺. Based on spectroscopic data and DFT calculations of PCA-Nspe as well as of a control peptoid having an achiral benzyl group instead of the phenylethyl side chain, we could suggest that the chiral and bulkier phenylethyl group at the C-terminus controls the preorganization of the two ligands, and this might play a role in the selectivity of PCA-Nspe . Significantly, we show that PCA-Nspe can extract Cu²⁺ from the natural copper binding protein metallothionein.     

Studies on the ion-exchange behaviour of chromium ferrocyanide

The sorption of univalent, bivalent and trivalent ions has been studied on chromium ferrocyanide gel. The studies reveal a high sorption capacity for Cs⁺, Tl⁺, Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe³⁺ and Th⁴⁺. The sorption of monovalent cations show purely ion-exchange mechanism while the uptake of bivalent and trivalent cations is non-equivalent in nature. Single elution of Rb⁺, Cs⁺ and Tl⁺ has been performed from the columns of this exchanger and the recovery is almost complete in all the cases. Cu²⁺ and Ag⁺ get completely adsorbed on the gel column and their elution is not possible probably due to the formation of some new solid phases. Depending on the K_d values of the metal ions, a large number of separations of radiochemical as well as analytical importance can be performed on the columns of this exchanger material.     

Highly Selective All‐Plastic,Disposable, Cu2+‐Selective Electrodes

Conducting polymers (CP) remain a promising material to construct stable potential all‐solid‐state ion‐selective potentiometric electrodes. The unique properties of poly(3,4‐ethylenedioxythiophene) doped with poly(4‐styrenesulfonate) ions, PEDOT‐PSS: high CP stability and affinity of doping anions towards Cu²⁺ ions, make it highly attractive for construction of all‐solid‐state copper(II)‐selective electrodes with outstanding selectivity. The additional benefits can arise from solution processability of commercially available PEDOT‐PSS system. This material was highly promising for a new sensor arrangement, i.e. to obtain disposable, planar and flexible all‐plastic Cu²⁺‐selective electrodes. These sensors can be obtained by casting a commercially available dispersion of PEDOT‐PSS (Baytron P) on a plastic, non‐conducting support material. The CP being both electrical lead and ion‐to‐electron transducer, was covered with plastic, solvent polymeric Cu²⁺ selective membrane. This extremely simple arrangement, after conditioning in dilute Cu²⁺ solution, was characterized with linear Nernstian responses within the activities range from: 0.1 to 10^?4 M, followed by super‐Nernstian responses for lower activities. The latter result points to effective elimination of primary ions leakage from the plastic membrane / transducer phase and has resulted in significantly improved selectivities. Obtained log K values were equal to ?7.6 for Co²⁺, ?7.4 for Zn²⁺, ?7.2 for Ca²⁺ and ?6.8 for Na⁺, respectively.     

BODIPY Immobilized MCM-41 Based Multianalyte Sensor: Application in Detection and Removal of Trivalent (Al3+, Cr3+) and Divalent (Cu2+, Hg2+) Metal Ions in Aqueous Media

In the present study, a novel p-phenylcarboxylic acid BODIPY ( L ) immobilized MCM-41 based solid chemosensor material L-propylsilyl@MCM-41 ( MS4 ) was developed to detect multiple metal ions in a pure aqueous medium. The synthesized solid chemosensor material MS4 shows high sensitivity and removal ability towards trivalent (Al³⁺, Cr³⁺) and divalent (Cu²⁺, Hg²⁺) metal ions. The emission intensity of MS4 enhanced multifold selectively in the presence of trivalent (Al³⁺, Cr³⁺) metal ions and shows quenching in the presence of divalent (Cu²⁺, Hg²⁺) metal ions. The limit of detection was calculated to be in the nanomolar range with Al³⁺, Cr³⁺, Cu²⁺_, and Hg²⁺ metal ions in the aqueous medium. The spectroscopic and analytical results suggest that MS4 selectively binds with Al³⁺ and Cr³⁺ through −NH functionality and with Hg²⁺ and Cu²⁺ through −COOH functionality of p-phenylcarboxylic acid BODIPY ( L ). Further, MS4 selectively removes Al³⁺, Cr³⁺, Cu²⁺, and Hg²⁺ metal ions from the aqueous media with removal efficiency of 97.28 %, 96.34 %, 87.19 %, and 95.63 %, respectively. No noticeable change in the concentration was observed for other metal ions. The recycling potential of MS4 was evaluated using EDTA for up to seven cycles with no significant reduction in sensing capability.     

Stability of Ultradisperse Copper in a Sulfo Cation Exchanger Matrix

The recrystallization of ultradisperse copper chemically deposited onto a sulfo cation exchanger matrix was studied by the potentiometric method. The stationary value of the electrode potential of the copper-sulfo cation exchanger composite was established during a long period of time, which depended on the ionic form of the composite (H⁺, Cu²⁺, or Na⁺), solution composition (CuSO₄, H₂SO₄, and Na₂SO₄), and solution concentration. Recrystallization was favored by copper(II) counterions, which entered the composite as a result of ion exchange, nonexchange absorption of copper sulfate, or preliminary composite transformation into the Cu²⁺ form. In the quasi-equilibrium state, the concentration of copper(II) counterions was maintained at a high level by the Donnan interfacial potential. At all the copper(II) sulfate concentrations used, the potential of the Cu²⁺/Cu ion—metal pair in the ion-exchange matrix remained at virtually the same level, which was indicative of the stable state of copper particles. In the absence of an external source of copper ions, recrystallization was significantly hindered; therefore, the potential exhibited only a slight drift. Copper ions formed in the solution of small crystals were localized in the vicinity of ionogenic matrix centers, which decreased the mobility of these particles as counterions; therefore, the dispersity of particles remained unchanged.     

An Efficient Way for the Recognition of Zinc Ion via the Fluorescence Enhancement

This study concentrates on the spectral and complexing properties of a tetraoxycalix[2]arene[2]triazine derivative bearing two bipyridines (Calix‐BIPY2) in a mixture of acetonitrile:chloroform (4:1, V:V). The results show that Calix‐BIPY2 has a highly selectivity and sensitivity towards Zn²⁺ over various competing cations (K⁺, Cu²⁺, Cd²⁺, Co²⁺, Fe²⁺, Hg²⁺, Ag⁺, Al³⁺ and Pb²⁺). The complexation of Zn²⁺ induces a remarkable fluorescence enhancement due to combination effects of the binding strength, electron spins state of metal ions, photoinduced charge transfer (PCT) and the rigidity of the complexing unit offered by calixarene‐based hosts.     

Highly selective colorimetric naked-eye Cu2+ detection using new bispyrazolone silver nanoparticle-based chemosensor

In this work, we have successfully developed novel silver nanoconjugates of pyrazolone analogue and screened its chemosensing potential in aqueous medium. Bispyrazolone silver nanoparticles (Bispyra-AgNPs) were synthesised and characterised through FTIR, UV-visible spectroscopy and atomic force microscopy. The sensing ability was explored towards Ca²⁺, Cd²⁺, Co²⁺, Cu²⁺, Fe²⁺, Li⁺, Pb²⁺, La³⁺, Hg²⁺, Mg²⁺, Ni²⁺ and Ba²⁺ metal ions, respectively. Bispyra-AgNPs showed a highly quenching potential in selective recognition of Cu²⁺and colour of the solution immediately turned from yellow to purple, after the addition of Cu²⁺ in to the solution. The developed method also displayed a remarkable selectivity for Cu²⁺ over others interfering metal ions. The binding ratio and stoichiometry of host-guest complex was found to be 1:1 and determined by Job’s method. The propose method is facile and sensitive to detect Cu²⁺ with detection limit of 10 µM.     

A Highly Copper‐Selective Ratiometric Fluorescent Sensor Based on BODIPY

A new ratiometric fluorescent sensor ( 1 ) for Cu²⁺ based on 4,4‐difluoro‐4‐bora‐3a,4a‐diaza‐s‐indacene (BODIPY) with di(2‐picolyl)amine (DPA) as ion recognition subunit has been synthesized and investigated in this work. The binding abilities of 1 towards different metal ions such as alkali and alkaline earth metal ions (Na⁺, K⁺, Mg²⁺, Ca²⁺) and other metal ions ( Ba²⁺, Zn²⁺, Cd²⁺, Fe²⁺, Fe³⁺, Pb²⁺, Ni²⁺, Co²⁺, Hg²⁺, Ag⁺) have been examined by UV‐vis and fluorescence spectroscopies. 1 displays high selectivity for Cu²⁺ among all test metal ions and a ～10‐fold fluorescence enhancement in I₅₈₂/I₅₅₈ upon excitation at visible excitation wavelength. The binding mode of 1 and Cu²⁺ is a 1:1 stoichiometry determined via studies of Job plot, the nonlinear fitting of the fluorometric titration and ESI mass.     

Synthesis,Kinetics, and Equilibrium Study of Highly Sensitive Colorimetric Chemosensor for Monitoring of Copper Ions based on Benzo[f]fluorescein Dye Derivatives

The colorimetric chemosensor 2‐((3,5‐dichloro‐2‐hydroxybenzylidene)amino)‐3′,6′‐dihydroxy‐6‐methyl‐4‐(p‐tolyl)spiro[benzo[f]isoindole‐1,9′‐xanthen]‐3(2H)‐one ( BFFSH ) derived from benzo[f]fluorescein dye was synthesized. NMR and IR spectroscopy as well as mass spectrometry were used to confirm the compound. BFFSH shows potential application for detecting metal ions in aqueous solution. It displays a colorimetric selectivity and sensitivity towards the aqueous solution of Cu²⁺ ions with a detection limit in the nano‐molar range (1.69 nM). In addition, the application of BFFSH was extended for the detection of Cu²⁺ ions in real water samples (tap and synthetic water) with a high recovery percentage. Additionally, the association constant (K_a) of BFFSH , which binds with Cu²⁺ ions based on 2:1 stoichiometry was calculated.     

Chemical properties of N-2-Sulfoethylchitosan with a medium degree of substitution

A method was developed for the preparation of N-2-sulfoethylchitosan (SECH) via synthesis in a gel with the use of the reaction of chitosan and sodium 2-bromoethanesulfonate. This method makes it possible to conduct a polymer-like transformation without any acid or base. The structures of the obtained polymers were confirmed via IR and ¹H NMR spectroscopy. The study of the sorption of Ag⁺, Cu²⁺, Zn²⁺, Ni²⁺, Co²⁺, Cd²⁺, Pb²⁺, Mn²⁺, Mg²⁺, Ca²⁺, Sr²⁺, and Ba²⁺ ions that were crosslinked by SECH during their joint presence in an ammonia-acetate buffer solution showed high values of selectivity in relation to those of silver(I) and copper(II). The selectivity of the sorption of silver(I) ions with respect to copper(II) ions increased with an increase in the degree of substitution of SECH.     

Uptake of Divalent Metal Ions (Cu2+, Zn2+ and Cd2+) by Polysiloxane Immobilized Glycinate Ligand System

ABSTRACT

Porous solid siloxane polymer carrying glycinate functional group of formula –(CH₂)₃NHCH₂COOH has been prepared by the sol-gel process. Treatment of aqueous solutions of divalent metal ions with the polysiloxane glycinate ligand system demonstrates that this material exhibits high potential for preconcentration of metal ions (Cu²⁺, Zn²⁺ and Cd²⁺). The ligand system chemisorbs these divalent metal ions, at optimum conditions, in the order: Cd²⁺ < Zn²⁺ < Cu²⁺. The uptake of copper ions is concentration dependent but it is independent on the presence of other competing ions. Treatment of the glycinate ligand system with acidic solution results in leaching of bound ligands. The highest leaching occurs in presence of copper ions at low pH     

Fluorescent chemosensor for Cu2+ ion based on iminoanthryl appended calix[4]arene

Calix[4]arene based podands 1a of cone conformation and 1b of 1,3-alternate conformation possessing imine units and bearing anthracene moieties have been synthesized by a 1 + 2 Schiff base condensation in good yields and examined for their cation recognition abilities towards cations such as lithium, sodium, potassium, nickel, cadmium, copper, zinc, lead, silver and mercury ions by UV–vis and fluorescence spectroscopy. The calix[4]arene derivative 1b shows a selective fluorescence enhancement in presence of Cu²⁺ ions among the various metal ions tested (Li⁺, Na⁺, K⁺, Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺, Ag⁺ and Hg²⁺ ions). The colour of the solution changes from colourless to light yellow in the presence of Cu²⁺ ions. The stoichiometry of the complex formed between 1b and Cu²⁺ was found to be 1:1 as established by Job’s plot.     

Mo3S132− Intercalated Layered Double Hydroxide: Highly Selective Removal of Heavy Metals and Simultaneous Reduction of Ag+ Ions to Metallic Ag0 Ribbons

We demonstrate a new material by intercalating Mo₃S₁₃^2? into Mg/Al layered double hydroxide (abbr. Mo₃S₁₃-LDH), exhibiting excellent capture capability for toxic Hg²⁺ and noble metal silver (Ag). The as-prepared Mo₃S₁₃-LDH displays ultra-high selectivity of Ag⁺, Hg²⁺ and Cu²⁺ in the presence of various competitive ions, with the order of Ag⁺>Hg²⁺>Cu²⁺>Pb²⁺≥Co²⁺, Ni²⁺, Zn²⁺, Cd²⁺. For Ag⁺ and Hg²⁺, extremely fast adsorption rates (≈90 % within 10 min, >99 % in 1 h) are observed. Much high selectivity is present for Ag⁺ and Cu²⁺, especially for trace amounts of Ag⁺ (≈1 ppm), achieving a large separation factor (SF_Ag/Cu) of ≈8000 at the large Cu/Ag ratio of 520. The overwhelming adsorption capacities for Ag⁺ (q_m^Ag=1073 mg g^?1) and Hg²⁺ (q_m^Hg=594 mg g^?1) place the Mo₃S₁₃-LDH at the top of performing sorbent materials. Most importantly, Mo₃S₁₃-LDH captures Ag⁺ via two paths: a) formation of Ag₂S due to Ag-S complexation and precipitation, and b) reduction of Ag⁺ to metallic silver (Ag⁰). The Mo₃S₁₃-LDH is a promising material to extract low-grade silver from copper-rich minerals and trap highly toxic Hg²⁺ from polluted water.     

Separation and Recovery of Some Metal Ions Using Pan Sorbed Zinc Silicate as Chelating Ion Exchanger

Abstract

A new inorganic ion exchanger zinc silicate has been synthesized. Its properties such as ion exchange capacity, heat effect and stability etc. have been studied. Sorption of PAN over zinc silicate formed a chelate ion exchanger which showed greater selectivity for some metal ions especially for Cu²⁺, Ni²⁺, Co²⁺, Fe³⁺, Ag⁺, Ag³⁺ and Pt⁴⁺. Selectivity has been determined on the basis of distribution coefficients of these metal ions. Separations of Pt(IV) from Fe(III), Au(III) from Fe(III), Ag(I) from Cu(II) and Au(III) from Cu(II) have been reported. The recovery of Pt(IV) and Au(III) from dilute solutions has also been studied.     

Ion-exchange selectivity of a sulfonic cation exchanger based on immobilized cis-tetraphenylcalix[4]resorcinolarene

The ion-exchange equilibrium of protons in SO₃H groups of a sulfonic cation exchanger based on immobilized cis-tetraphenylcalix[4]resorcinolarene with cations of Li⁺, Na⁺, Ag⁺, Cu²⁺, In³⁺, and protonated 1,3,5,7-tetraazaadamantane in aqueous solutions of electrolytes at 293 K was studied. The corrected coefficients of the cation exchange selectivity were calculated.     

Copper(II) ion sensor based on electropolymerized undoped conducting polymers

A solid state copper(II) ion sensor is reported based on the application of electropolymerized undoped (neutral) polycarbazole (PCz) and polyindole (PIn) modified electrodes. The new sensor shows high selectivity to Cu²⁺ ions with a detection limit of 10^–5 M. PCz and PIn are formed respectively by the anodic oxidation of 50 mM carbazole and 5 mM indole monomers in dichloromethane containing 0.1 M tetrabutylammonium perchlorate on a platinum electrode using a single compartment cell. Potentiostatic polymerization of both the monomers are carried out at 1.3 V and 1.0 V vs. Ag/AgCl, respectively. Perchlorate ions were electrochemically removed from the polymer films by applying – 0.2 V vs. Ag/AgCl. Polymer-coated electrodes are incubated in 1 M KCl solution for 8 h followed by incubation in distilled water for 2 h before using as a metal ion sensor. The undoped PCz and PIn electrodes were found to be highly selective and sensitive for Cu²⁺ ions with little selectivity for Pb²⁺ and negligible response towards Ag⁺, Hg²⁺, Cu⁺, Ni²⁺, Co²⁺, Fe²⁺, Fe³⁺ or Zn²⁺. Potentiometric responses for Cu²⁺ ions are recorded for both the sensor electrodes together with a double-junction Ag/AgCl reference electrode. Calibration curves for Cu²⁺ are reported for both ion sensors. The polymer-modified electrodes were found to be stable for several weeks. Electronic Publication     

Synthesis and characterization of novel indole-containing half-crowns as new emissive metal probes

Two new indole derivatives have been synthesized by a one-pot procedure and their potential as fluorescence probes for metal ions was investigated. The sensor capability of 1 and 2 toward cations such as Ag⁺, Cu²⁺, Zn²⁺, Cd²⁺, Pb²⁺, and Hg²⁻ was studied in dichloromethane solution by absorption, fluorescence emission, and ¹H NMR titrations. Both probes showed selectivity for Ag⁺ and Hg²⁺ ions. The results suggest that these compounds may serve as promising models for future design of novel and more potent sensors.     

Synthesis,characterization and applications of schiff base chemosensor for determination of Cu2+ ions

A novel thiazole-based Schiffbase chemosensor SB1 with N- and O- donor atoms was synthesized and characterized by different techniques (UV–vis, ¹³C NMR, ¹H NMR, and FT-IR analysis). The chemosensor SB1 was used for the determination of Cu²⁺ ions in various samples. The significant spectral changes in absorption spectra of chemosensor SB1 at 220 and 416 nm and the color change from light yellow to yellowish-brown indicate high selectivity and sensitivity towards Cu²⁺ ions as compared to other cations (Na⁺, K⁺, Ag⁺, Zn²⁺, Ni²⁺, Pb²⁺, Mn²⁺, Mg²⁺, Co²⁺, Cd²⁺, Sn²⁺, Hg²⁺, Cr³⁺, Fe^3+, and Al³⁺). The sensing mechanism of SB1 was investigated through various techniques such as FT-IR, UV–vis and ¹H NMR titration experiment and further confirmed by DFT computational studies. The 2:1 binding mode between SB1 and Cu²⁺ ions was confirmed by Job‘s plot using UV–vis spectrophotometry. The limit of detection (LOD) and limit of quantification (LOQ) were found to be 0.015 and 0.0471 µg mL^?1, respectively. The percent recovery of Cu²⁺ from various environmental samples was found to be 95.00–103.33% at various levels. These obtained results demonstrate that chemosensor SB1 is a cost-effective, facile, selective, sensitive, and colorimetric sensing platform to detect trace amounts of Cu²⁺ ions in variousenvironmental and agricultural samples.     

Study of some metallic silicates as ion-exchangers

The extraction of ammine complexes of Cu²⁺, Cd²⁺, Ni²⁺, Co²⁺ and Zn²⁺ by synthesised manganese, nickel and zinc silicates has been studied at different pH and ionic concentrations in the external solution. It has been found that the uptake of the metal ion Co²⁺, Cu²⁺ and Zn²⁺ increases with increase in pH of the external solution, attains a maximum and then decreases. However, the uptake for Cd²⁺ and Ni²⁺ increases continuously. The q_A values of all the silicates increases with the increase in the concentration of the exchanging ion and its order for the investigated metal ions is Ni²⁺ < Co²⁺ < Cd²⁺ < Zn²⁺ < Cu²⁺.