Synthesis and functionalities of poly(N‐vinylalkylamide). XII. Synthesis and thermosensitive property of poly(vinylamine) copolymer prepared from poly(N‐vinylformamide‐co‐N‐vinylisobutyramide)

The differences in the polymerization abilities of N‐vinylformamide (NVF) and N‐vinylisobutyramide (NVIBA) and the synthesis of their copolymers were studied. The polymerization abilities were fairly good and quite similar to those of N‐vinyl‐ acetamide (NVA), a monomer in the same class as N‐vinylalkylamides. Since the monomer reactivity ratios were r₁ = 1.08 and r₂ = 0.92 (M₁ = NVF, M₂ = NVIBA), respectively, it is clear that the comonomers definitely were converted to random copolymers. The resulting copolymers poly(NVF‐co‐NVIBA) exhibited the cloud points sharply. The light transmittance profiles were the same as those for poly(NVIBA) although they increased from 39 °C for poly(NVIBA), with an increase in the corresponding hydrophilic NVF component. Our final objective was to produce a cloud point controlled polymer material with primary amino groups. To achieve this, we examined the hydrolysis of poly(NVF), poly(NVA), poly(NVIBA), and poly(NVF‐co‐NVIBA) to obtain poly(vinylamine) [poly(VAm)]. The hydrolytic cleavage of poly(NVF) and poly(NVA) was promoted by an increase in temperature. However, poly(NVIBA) was not cleaved appreciably. The hydrolysis of poly(NVF‐co‐NVIBA) was done under controlled conditions, and amino groups selectively were introduced to only one of two components of the copolymer. The cloud point of the hydrolyzed copolymer shifted to a higher temperature than that of the copolymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3674–3681, 2000     

Polyvinylamine at last

A sustained effort to develop and commercialize a practical radical addition route to amine functional polymers (AFPs) resulted, after almost 20 years, in the successful completion of a world scale monomer plant to produce N‐vinylformamide (NVF). NVF is readily polymerized and its polymers are easily hydrolyzed to reactive and atom economical polyvinylamine (PVAm) or its salts. This highlight touches on work by many companies, but focuses on efforts at Air Products and Chemicals, tracing the origins, rational, challenges, technical and commercial advances, and failures. Practical routes to new AFPs, copolymers, and derivatives across the entire molecular weight range (MW < 10³ to >10⁶) were achieved. NVF offers access to multiple water soluble, water dispersible, and nonwater soluble polymer markets, including papermaking additives and coatings, water treatment polymers, enhanced oil recovery polymers, radiation cure monomers, stabilizers, dispersing agents, surfactants, and crosslinkers. Lessons learned along the road to commercializing major new chemical technologies are also highlighted. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2257–2283, 2010     

Radical polymerization of novel N‐substituted‐N‐vinylformamide derivatives with bulky chiral substitutents

A series of novel N‐substituted‐N‐vinylformamides were synthesized, and the effect of bulky substituents on their radical polymerizability and polymer structure were investigated. N‐(p‐Methoxybenzyl)‐N‐vinylformamide ( 3 ) and N‐cyclohexylmethyl‐N‐vinylformamide ( 4 ) generated polymers, while it was known that their N‐vinylacetamide derivatives did not. ¹H NMR and ¹³C NMR analyses of poly( 3 ), however, revealed almost no difference among the various polymerization conditions, implying that the substituent bulkiness did not influence the polymer structures. On the other hand, the chiral polymers, which were obtained by the radical polymerization of N‐(S)‐2‐methylbutyl‐N‐vinylformamide ((S)‐ 5 ) and N‐(S)‐2,3‐dihydroxypropyl‐N‐vinylformamide ((S)‐ 7 ) at 0 °C, showed sharper spectral patterns than those obtained at higher polymerization temperatures. Furthermore, the intensities of their positive cotton effects on circular dichroism increased when the polymerization temperature was low, suggesting that the substituent bulkiness of (S)‐ 5 and (S)‐ 7 influenced the polymer structures, such as their stereoregularity and regioregularity. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of Poly(N‐vinylamide)s and Poly(vinylamine)s and Their Block Copolymers by Organotellurium‐Mediated Radical Polymerization

Controlled polymerization of acyclic N‐vinylamides, that is, N‐methyl‐N‐vinylacetamide (NMVA), N‐vinylacetamide (NVA), and N‐vinylformamide (NVF), by organotellurium‐mediated radical polymerization (TERP) is reported. The corresponding poly(N‐vinylamide)s with controlled molecular weight and low dispersity (Ð<1.25) were obtained with high monomer conversion in all cases. This is the first report on the controlled polymerization of NVF. Hydrolysis of the polymers, in particular PNVF, occurred quantitatively under mild reaction conditions, giving structurally controlled poly(vinylamine)s. Block copolymers containing poly(N‐vinylamide) and poly(vinylamine) segments were also synthesized in a controlled manner.     

Synthesis of n‐alkyl methacrylate polymers with pendant carbazole moieties and their derivatives

New methacrylate monomers with carbazole moieties as pendant groups were synthesized by multistep syntheses starting from carbazoles with biphenyl substituents in the aromatic ring. The corresponding polymers were prepared using a free‐radical polymerization. The novel polymers contain N‐alkylated carbazoles mono‐ or bi‐substituted with biphenyl groups in the aromatic ring. N‐alkyl chains in polymers vary by length and structure. All new polymers were synthesized to evaluate the structural changes in terms of their effect on the energy profile, thermal, dielectric, and photophysical properties when compared to the parent polymer poly(2‐(9H‐carbazol‐9‐yl)ethyl methacrylate). According to the obtained results, these compounds may be well suited for memory resistor devices. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 70–76     

Synthesis and characterization of graft polymethacrylates containing conducting diphenyldithiophene for organic thin‐film transistors

A class of [5,5′]‐diphenyl‐[5,5′]‐dithiophene (PTTP)‐modified methacrylates has been synthesized and free radically polymerized to form graft polymethacrylates with the conducting PTTP segments as pendant side chains. Both the terminal alkyl side chain and spacer between the PTTP segments and polymer backbone could be varied to study fundamental structure–property relationships for this class of materials. Specifically, a group of three different PTTP graft polymethacrylates has been successfully synthesized with the alkyl side chain varying from hexyl to dodecyl. For the dodecyl‐terminated poly(4‐(5′‐(4‐dodecylphenyl)‐[2,2′‐bithiophen]‐5‐yl)phenethyl methacrylate), p(DPTTPEM), a counterpart, poly(4‐(5′‐(4‐dodecylphenyl)‐[2,2′‐bithiophen]‐5‐yl)phenbutyl methacrylate), p(DPTTPBM), where the ethyl spacer was replaced by a butyl group, was synthesized. The experimental results indicated that both the alkyl side chain and spacer significantly affected the reactivity of the PTTP‐modified methacrylates during free radical polymerization as well as the physical properties of the resultant graft polymers including solubility, morphology, and electrochemical and electrical properties. Typical field‐effect mobilities on the order of 10^?5 cm² V^?1 s^?1 were observed for all the PTTP monomers in air, which was attributed to their crystalline phase as revealed by differential scanning calorimetry and X‐ray diffraction studies. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Preparation of novel acrylamide‐based thermoresponsive polymer analogues and their application as thermoresponsive chromatographic matrices

New thermoresponsive polymers based on poly(N‐(N′‐alkylcarbamido)propyl methacrylamide) analogues were designed with increased hydrophobic content to facilitate temperature‐dependent chromatographic separations of peptides and proteins from aqueous mobile phases. These polymer solution exhibited a lower critical solution temperature (LCST) when the alkyl group is methyl, ethyl, isopropyl, propyl, butyl, and isobutyl. However, larger alkyl groups such as hexyl and phenyl were not soluble in aqueous solutions at any temperature. Phase transition temperatures were lower for larger alkyl groups and increased with decreasing polymer molecular weight and concentration in solution. LCST dependence on polymer molecular weight and concentration is more significant compared with well‐studied poly(N‐isopropylacrylamide) (PIPAAm). Partition coefficient (log P) values for N‐(N′‐butylcarbamide)propylmethacrylamide and N‐(N′‐isobutylcarbamide)propyl methacrylamide (iBuCPMA) monomers are larger than that for IPAAm monomer, suggesting higher hydrophobicity than IPAAm. Chromatographic evaluation of poly(N‐(N′‐isobutylcarbamide)propyl methacrylamide) (PiBuCPMA) grafted silica particles in aqueous separations revealed larger k′ values for peptides, insulin, insulin chain B, and angiotensin I than PIPAAm‐grafted silica beads. In particular, k′ values for insulin obtained from PiBuCPMA‐grafted silica separations were much larger than those from PIPAAm‐grafted surface separations, indicating that PiBuCPMA should be more hydrophobic than PIPAAm. These results support the introduction of alkylcarbamido groups to efficiently increase thermoresponsive polymer hydrophobicity of poly(N‐alkylacrylamides) and poly(N‐alkylmethacrylamides). Consequently, poly(N‐(N′‐alkylcarbamido)propyl methacrylamide) analogues such as PiBuCPMA and poly(N‐(N′‐alkylcarbamido)alkylmehacrylamide) are new thermoresponsive polymers with appropriate hydrophobic partitioning properties for protein and peptide separations in aqueous media, depending on selection of their alkyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5471–5482, 2008     

Synthesis and fluorescent properties of model compounds for conjugated polymer containing maleimide units at the main chain

2,3‐Diaryl substituted maleimides as model compounds of conjugated maleimide polymers [poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar)] were synthesized from 2,3‐dibromo‐N‐substituted maleimide (DBrRMI) [R= cyclohexyl (DBrCHMI) and n‐hexyl (DBrHMI)] and aryl boronic acid using palladium catalysts. To clarify structures of conjugated polymer containing maleimide units at the main chain, ¹³C NMR spectra of 2‐aryl or 2,3‐diaryl substituted maleimides were compared with those of N‐substituted maleimide polymers. Copolymers obtained with DBrRMI via Suzuki‐Miyaura cross‐coupling polymerizations or Yamamoto coupling polymerizations were dehalogenated structures at the terminal end. This dehalogenation may contribute to the low polymerizability of DBrRMIs. On the other hand, the π‐conjugated compounds showed high solubility in common organic solvents. The N‐substituents of maleimide cannot significantly affect the photoluminescence spectra of 2,3‐diaryl substituted maleimides derivatives. The fluorescence spectra of poly(RMI‐alt‐Ar) and poly(RMI‐co‐Ar) varied with N‐substituents of the maleimide ring. When exposed to ultraviolet light of wavelength 352 nm, a series of 1,4‐phenylene‐ and/or 2,5‐thienylene‐based copolymers containing N‐substituted maleimide derivatives fluoresced in a yellow to blue color. It was found that photoluminescence emissions and electronic state of π‐conjugated maleimide derivatives were controlled by aryl‐ and N‐substituents, and maleimide sequences of copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Surface polyion complex gel with poly(vinylphosphonic acid) and poly(N‐vinylamide)s

The surface polyion complex gel (sPIC gel), which possesses chemically bonded nonionic gel moiety, was designed using N‐vinylacetamide (NVA), N‐vinylforamide (NVF), and vinyl phosphonic acid (VPA). Taking advantage of the property of NVF as vinylamine (VAm) precursor, the cationic moiety was introduced only onto the surface of poly(NVA‐co‐NVF), producing surface hydrolyzed poly(NVA‐co‐NVF‐co‐VAm), and the successive polymerization of VPA inside the gel successfully produced sPIC gel. The swelling ratio of the sPIC gel was investigated under various pH conditions, and compared with that of the fully polyion complex gel (PIC gel), using totally hydrolyzed poly(NVA‐co‐VAm). The swelling ratio of sPIC gel ranged between 14 and 25, while that of the PIC gel ranged between 2 and 5. The anionic compound, AR, showed a sustained release from sPIC gel at pH 2, due to the electrostatic interactions. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 562–566     

Poly(phenylene vinylene)‐based copolymers containing 3,7‐phenothiazylene and 2,6‐pyridylene chromophores: Fluorescence sensors for acids,metal ions,and oxidation

A novel copolymer, poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐2,6‐pyridylene‐1,2‐ethenylene) ( P3 ), containing N‐hexyl‐3,7‐phenothiazylene and 2,6‐pyridylene chromophores was synthesized to investigate the effect of protonation, metal complexation, and chemical oxidation on its absorption and photoluminescence (PL). Poly(N‐hexyl‐3,8‐iminodibenzyl‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) and poly(N‐hexyl‐3,7‐phenothiazylene‐1,2‐ethenylene‐1,3‐phenylene‐1,2‐ethenylene) ( P2 ), consisting of 1,3‐divinylbenzene alternated with N‐hexyl‐3,8‐iminodibenzyl and N‐hexyl‐3,7‐phenothiazylene, respectively, were also prepared for comparison. Electrochemical investigations revealed that P3 exhibited lower band gaps (2.34 eV) due to alternating donor and acceptor conjugated units (push–pull structure). The absorption and PL spectral variations of P3 were easily manipulated by protonation, metal chelation, and chemical oxidation. P3 displayed significant bathochromic shifts when protonated with trifluoroacetic acid in chloroform. The complexation of P3 with Fe³⁺ led to a significant absorption change and fluorescence quenching, and this implied the coordination of ferric ions with the 2,6‐pyridylene groups in the backbone. Moreover, both phenothiazylene‐containing P2 and P3 showed conspicuous PL quenching with a slight redshift when oxidized with NOBF₄. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1272–1284, 2004     

Polymerization of branched thiophene monomers and optoelectronic properties of materials

Bithiophene monomers ( 5HBTh and 5HBThO ) were prepared by the Suzuki coupling reaction of 3‐thienylboronic acid with 2‐bromo‐5‐hexylthiophene and 2‐bromo‐5‐hexylthiophene‐1,1‐dioxide. The oxidation polymerization mediated by vanadium catalyst gave poly(5HBTh) and oligo(5HBThO) . 5HBThO bearing thiophene‐1,1‐dioxide had an absorption maximum at longer wavelength region than 5HBTh due to the intramolecular charge transfer interaction, while peak maxima blue shifted and their difference became small after the polymerization. Terthiophene monomers ( 5″HTTh , 3,5″DHTTh , and 4,5″DHTTh ) were subsequently prepared by the mono‐bromination of 5HBTh followed by the Suzuki coupling reaction with boronic acid derivatives. The vanadium‐catalyzed oxidation polymerization of 5″HTTh and 4,5″DHTTh afforded soluble polymers and the absorption maximum wavelengths red shifted after the polymerization in contrast to bithiophene monomers and 3,5″DHTTh . The absorption and emission spectra of poly(5″DHTTh) red shifted when compared with those of poly(4,5″DHTTh) . Thus the presence and position of n‐hexyl chain influenced the monomer polymerizability and optoelectronic properties of branched polythiophenes. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3034–3044, 2009     

Contact bactericides and fungicides on the basis of amino‐functionalized poly(norbornene)s

This study is aimed at investigating the microbiocidal potential of amino‐functionalized poly(norbornenes) in the solid state. A series of norbornene‐type monomers that carry secondary or tertiary amine functions as well as hexyl and dodecyl groups were prepared. Ring‐opening metathesis polymerization was used to prepare homopolymers of the amine bearing monomers and random copolymers of amine‐ and alkyl‐substituted monomers of high average molar mass. The resulting polymers were characterized by nuclear magnetic resonance, thermogravimetry, differential scanning calorimetry, infrared spectroscopy, and contact angle measurements, and their contact biocidal potential was evaluated according to the Japanese Industry standard Z2801. Tested microorganisms comprised Pseudomonas aeruginosa, Escherichia coli, Staphylococcus aureus, Candida albicans, and Aspergillus niger. Microbiocidal activity of selected polymer films against E. coli, S. aureus, and A. niger was found, whereas against C. albicans and P. aeruginosa microbiostatic behavior was observed. Moreover, the most potent copolymer revealed no cytotoxicity rendering a biocidal polymer with potential applications in mammalian‐, and in particular, human‐related fields. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of chiral poly(l‐lactide‐b‐hexyl isocyanate) macromonomers with norbornenyl end groups and their homopolymerization through ring opening metathesis polymerization to afford polymer brushes

We report the synthesis of the novel half‐titanocene alkoxide complex bischloro‐η⁵‐cyclopentadienyl(bicyclo[2.2.1]‐hept‐5‐en‐2‐oxy) titanium (IV), [CpTiCl₂(O‐NBE)]. This complex was employed for the synthesis of chiral poly(l ‐lactide‐b‐hexyl isocyanate) diblock copolymer bearing a norbornene end group with sequential addition of monomers. The poly(hexyl isocyanate) block is chiral due to the last l ‐lactide unit of the poly(l ‐lactide) block. This macromonomer was polymerized towards a chiral polymer brush structure with polynorbornene backbone and chiral poly(l ‐lactide‐b‐hexyl isocyanate) side chains using Grubbs first‐generation catalyst. The polymers were characterized using size exclusion chromatography (SEC), nuclear magnetic resonance (NMR), and circular dichroism (CD) spectroscopy and their thermal properties were investigated by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) analysis. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1102–1112     

Poly(ionic liquid)s based on imidazolium hydrogen carbonate monomer units as recyclable polymer‐supported N‐heterocyclic carbenes: Use in organocatalysis

Synthesis of novel poly(ionic liquid)s, namely, poly(1‐vinyl‐3‐alkylimidazolium hydrogen carbonate)s, denoted as poly([NHC(H)][HCO₃])s or PVRImHCO₃, where R is an alkyl group (R = ethyl, butyl, phenylethyl, dodecyl), is described. Two distinct synthetic routes were explored. The first method is based on the free‐radical polymerization (FRP) of 1‐vinyl‐3‐alkylimidazolium monomers featuring a hydrogen carbonate counter anion (HCO₃^?), denoted as VRImHCO₃. The latter monomers were readily synthesized by alkylation of 1‐vinylimidazole (VIm), followed by direct anion exchange of 1‐vinyl‐3‐alkylimidazolium bromide monomers (VRImBr), using potassium hydrogen carbonate (KHCO₃) in methanol at room temperature. Alternatively, the same anion exchange method could be applied onto FRP‐derived poly(1‐vinyl‐3‐alkylimidazolium bromide) precursors (PVRImBr). All PVRImHCO₃ salts proved air stable and could be manipulated without any particular precautions. They could serve as polymer‐supported precatalysts to generate polymer‐supported N‐heterocyclic carbenes, referred to as poly(NHC)s, formally by a loss of “H₂CO₃” (H₂O +CO₂) in solution. This was demonstrated through selected organocatalyzed reactions of molecular chemistry, known as being efficiently mediated by molecular NHC catalysts, including benzoin condensation, transesterification and cyanosilylation of aldehyde. Of particular interest, recycling of the polymer‐supported precatalysts was possible by re‐carboxylation of in situ generated poly(NHC)s. Organocatalyzed reactions could be performed with excellent yields, even after five catalytic cycles. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4530–4540     

Synthesis of a new 2‐amino‐glycan,poly‐(1→6)‐α‐D‐mannosamine,by ring‐opening polymerization of 1,6‐anhydro‐mannosamine derivatives

A stereoregular 2‐amino‐glycan composed of a mannosamine residue was prepared by ring‐opening polymerization of anhydro sugars. Two different monomers, 1,6‐anhydro‐2‐azido‐mannose derivative ( 3 ) and 1,6‐anhydro‐2‐(N, N‐dibenzylamino)‐mannose derivative ( 6 ), were synthesized and polymerized. Although 3 gave merely oligomers, 6 was promptly polymerized into high polymers of the number‐average molecular weight (M_n) of 2.3 × 10⁴ to 2.9 × 10⁴ with 1,6‐α stereoregularity. The differences of polymerizability of 3 and 6 from those of the corresponding glucose homologs were discussed. It was found that an N‐benzyl group is exceedingly suitable for protecting an amino group in the polymerization of anhydro sugars of a mannosamine type. The simultaneous removal of O‐ and N‐benzyl groups of the resulting polymers was achieved by using sodium in liquid ammonia to produce the first 2‐amino‐glycan, poly‐(1→6)‐α‐D ‐mannosamine, having high molecular weight through ring‐opening polymerization of anhydro sugars.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Atom transfer radical polymerization of hexyl acrylate and preparation of its “all‐acrylate” block copolymers

This investigation reports the polymerization of hexyl acrylate (HA) using atom transfer radical polymerization technique and subsequently the preparation of its di‐ and triblock copolymers with methyl methacrylate. Atom transfer radical polymerization of HA was investigated using different initiators and CuBr or CuCl as catalyst in combination with varying ligands, e.g., 2,2′‐bipyridine and N,N,N′,N″,N″‐pentamethyl diethylenetriamine. Reaction parameters were adjusted to successfully polymerize HA with well‐defined molecular weights and narrow polydispersity indices. The polymerization was better controlled by the addition of polar solvents, which created a homogeneous catalytic system. UV–vis analysis showed that the polar solvent, acetone coordinated with copper (I), changes the nature of the copper catalyst, thereby influencing the dynamic equilibrium of activation–deactivation cycle. This resulted in improved control over polymerization as well as in lowering the polydispersity indices, but at the cost of polymerization rate compared with the bulk process. The presence of ? Br end group in the polymer chains was confirmed by ¹H NMR as well as MALDI‐TOF mass analysis. In addition, poly(hexyl acrylate) was used as macroinitiator to prepare various “all‐acrylate” block (diblock, triblock) copolymers that were characterized by GPC and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3499–3511, 2008     

Synthesis and polymerizability of CN monomers

The synthesis and polymerizability of imine C?N monomers is surveyed. The investigated imines were either far more reactive than similarly substituted C?C or C?O monomers, or too stable to polymerize. Imines with electron‐attracting substituents on N favor polymerization by anionic mechanism, but led only to low molecular weight polymers. Imines with a donor substituent on N, such as N‐arylmethyleneimines, polymerized by cationic or anionic mechanism. 1‐ and 2‐Aza‐1,3‐butadienes were also rather unstable and polymerized to oligomers. The symmetrically substituted 2,3‐diaza‐1,3‐butadienes could be purified and polymerized successfully using anionic initiators, resulting in both 1,4‐ and 1,2‐structures in the polymer backbone, depending on the substituents. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Cationic ring‐opening polymerization of novel 1,3‐dehydroadamantanes with various alkyl substituents: Synthesis of thermally stable poly(1,3‐adamantane)s

Cationic ring‐opening polymerizations of 5‐alkyl‐ or 5,7‐dialkyl‐1,3‐dehydroadamantanes, such as 5‐hexyl‐ ( 4 ), 5‐octyl‐ ( 5 ), 5‐butyl‐7‐isobutyl‐ ( 6 ), 5‐ethyl‐7‐hexyl‐ ( 7 ), and 5‐butyl‐7‐hexyl‐1,3‐dehydroadamantane ( 8 ), were carried out with super Brønsted acids, such as trifluoromethanesulfonic acid or trifluoromethanesulfonimide in CH₂Cl₂ or n‐heptane. The ring‐opening polymerizations of inverted carbon–carbon bonds in 4–8 proceeded to afford corresponding poly(1,3‐adamantane)s in good to quantitative yields. Poly( 4–8 )s possessing alkyl substituents were soluble in 1,2‐dichlorobenzene, although a nonsubstituted poly(1,3‐adamantane) was not soluble in any organic solvent. In particular, poly( 8 ) exhibited the highest molecular weight at around 7500 g mol^?1 and showed excellent solubility in common organic solvents, such as THF, CHCl₃, benzene, and hexane. The resulting poly( 4–8 )s containing adamantane‐1,3‐diyl linkages showed good thermal stability, and 10% weight loss temperatures (T₁₀) were observed over 400 °C. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4111–4124     

Synthesis and polymerization studies of formaldehyde oxime and its derivatives

Formaldehyde oxime and three O‐alkyl derivatives were examined as potential imine monomers. Formaldehyde oxime spontaneously polymerized below 60 °C and did not polymerize above 60 °C (ceiling temperature), even in the presence of free‐radical or cationic initiators. The O‐benzoyl derivative was isolated as the cyclic trimer but could not be converted into the monomeric form. Formaldehyde O‐benzyloxime was synthesized and isolated. Attempted homopolymerizations in the presence of free‐radical initiators only led to oligomers, whereas with cationic initiators only cyclic trimer was obtained. Copolymerizations with appropriate vinyl monomers and free‐radical and anionic initiators yielded only low molecular weight polymers. Cationic copolymerizations gave higher molecular weights and polymer yields, but the polymers containing appreciable amounts of imine function had very low molecular weights. We conclude that the polymerizability of imines is extremely sensitive to the substitution pattern: imines with only a substituent on nitrogen are unstable and readily polymerize, whereas imines with more substituents generally do not polymerize. Electron‐withdrawing substituents are more favorable to polymerizability. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1866–1872, 2000     

Synthesis of liquid crystalline–amorphous block copolymers by the combination of atom transfer and photoinduced radical polymerization mechanisms

The synthesis of ABA‐type block copolymers, involving liquid‐crystalline 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate (LC6) and styrene (St) monomer with copper‐based atom transfer radical polymerization (ATRP) and photoinduced radical polymerization (PIRP), was studied. First, photoactive α‐methylol benzoin methyl ether was esterified with 2‐bromopropionyl bromide, and it was subsequently used for ATRP of LC6 in diphenylether in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst. The obtained photoactive functional liquid‐crystalline polymer, poly[6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate] (PLC6), was used as an initiator in PIRP of St. Similarly, photoactive polystyrenes were also synthesized and employed for the block copolymerization of LC6 in the second stage. The spectral, thermal, and optical measurements confirmed a full combination of ATRP and PIRP, which resulted in the formation of ABA‐type block copolymers with very narrow polydispersities. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1892–1903, 2003