Synthesis and properties of fluorene or carbazole‐based alternating copolymers containing Si and vinylene units in the main chain

Alternating copolymerization of 9,9‐dihexyl‐2,7‐dibromofluorene (HFl), N‐hexyl‐2,7‐dibromocarbazole (2,7‐HCz) or N‐hexyl‐3,6‐dibromocarbazole (3,6‐HCz) with Si‐containing divinyl or diallyl compounds, divinyldimethylsilane, divinyldiphenylsilane, 1,3‐divinyltetramethyldisiloxane, 1,4‐bis(dimethylvinylsilyl)benznene, diallyldimethylsilane, or diallyldiphenylsilane has been investigated using Mizoroki‐Heck reaction with a Pd catalyst. The corresponding alternating copolymers were obtained in good yield. The alternating copolymers from HFl or 2,7‐HCz showed good solubility in typical organic solvents. On the other hand, the copolymer with 3,6‐HCz became insoluble due to the crosslinking. Photophysical properties of the resulting copolymers were investigated with UV–vis absorption and photoluminescence spectroscopy. All the copolymers showed absorption peak derived from π–π* transition at around 340 nm, which was blue shifted in comparison with that of the corresponding homopolymer. Whereas emission peaks of the copolymers of the cast film were red shifted in comparison with that of the homopolymers. Multiple broad absorption peaks, which would be derived from intramolecular charge transfer through σ–π moiety, were also detected in the range from 390 to 450 nm in the spectra of the copolymers containing Si‐vinylene unit. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4513–4521, 2008     

Parameters influencing the molecular weight of 3,6‐carbazole‐based D‐π‐A‐type copolymers

Condensation copolymerization reactions of carbazole 3,6‐diboronate with 4,7‐bis(5‐bromo‐2‐thienyl)‐2,1,3‐benzothiadiazole (DTBT) only produce low‐molecular‐weight donor (D)‐π‐acceptor (A) copolymers. High‐molecular‐weight copolymers for use in optoelectronic devices are necessary for achieving extended π‐conjugation and for controlling the copolymer processibility. To elucidate the cause of the persistently low molecular weight, we synthesized three 3,6‐carbazole‐based D‐A copolymers using copolymerizations of N‐9′‐heptadecanyl‐3,6‐carbazole with DTBT, N‐9′{2‐[2‐(2‐methoxy‐ethoxy)‐ethoxy]‐ethyl}‐3,‐6‐carbazole with DTBT, and N‐9′‐heptadecanyl‐3,6‐carbazole with alkyl‐substituted DTBT. We investigated several parameters for their influence on molecular copolymer weight, including the conformation of the chain during growth, the solubility of the monomers, and the dihedral angles between the donor and acceptor units. Size exclusion chromatography, UV–vis absorption spectroscopy, and computational studies revealed that the low molecular weights of 3,6‐carbazole‐based D‐A copolymers resulted from conjugation breaks and the resulting high coplanarity, which led to strong interactions between polymer chains. These interactions limited formation of high‐molecular‐weight‐copolymers during copolymerization. The strong intermolecular interactions of the 3,6‐carbazole moiety were exploited by incorporating 3,6‐carbazole units into poly[9′,9′‐dioctyl‐2,7‐flourene‐alt‐5,5‐(4′,7′‐di‐2‐thienyl‐2′,1′,3′‐benzothiadiazole)] prepared from 9′,9′‐dioctyl‐2,7‐flourene and DTBT. Interestingly, the number average molecular weight increased gradually with increasing 2,7‐fluorene monomer content but the number of conjugation breaks was a range of 6–7. The hole mobilities of the copolymers were studied for comparison purposes. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and properties of photoluminescent polymers bearing electron‐facilitating oxadiazole derivative side groups

Poly(p‐divinylene phenylene) derivatives bearing fluorene and carbazole units in the main chain and 5‐phenyl‐1,3,4‐oxadiazole moieties as side groups were prepared by the polycondensation of a newly synthesized monomer, [2‐(5′‐phenyl‐1′,3′,4′‐oxadiazole‐2′‐yl)‐1,4‐xylylene]bis(triphenyl phosphonium bromide) (OXAD), with 9,9‐dibutylfluorene‐2,2′‐dicarbaldehyde (DBFDA) and 9‐(2‐ethylhexyl)carbazole‐3,6‐dicarbaldehyde (EHCDA), which gave DBFDA–OXAD and EHCDA–OXAD. Analogues of these polymers without the side groups were also synthesized by the reaction of 1,4‐xylene bis(triphenyl phosphonium bromide) (PXYL) with the dicarbaldehydes, which gave DBFDA–PXYL and EHCDA–PXYL. All the synthesized polymers are soluble in organic solvents, giving films of good quality. The polymers are stable beyond 375 °C. They emit blue and blue‐green light, and their quantum yields are 38–79% in solution and 1–24% in film, depending on the fluorene and carbazole units as well as the side groups. In particular, the OXAD‐based polymers contain hole‐facilitating backbones and electron‐facilitating side groups, perhaps allowing these polymers to transport both holes and electrons. Overall, the synthesized polymers are potential candidates for the fabrication of light‐emitting devices. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1173–1183, 2002     

The ability of Ex2Box4+ to interact with guests containing π‐electron‐rich and π‐electron‐poor moieties

The ability of Ex 2 Box⁴⁺ as a host, able to trap guests containing both π‐electron rich (polycyclic aromatic hydrocarbons‐PAHs) and π‐electron poor (quinoid‐ and nitro‐PAHs) moieties was investigated to shed light on the main factors that control the host–guest (HG) interaction. The nature of the HG interactions was elucidated by energy decomposition (EDA‐NOCV), noncovalent interaction (NCI), and magnetic response analyses. EDA‐NOCV reveals that dispersion contributions are the most significant to sustain the HG interaction, while electrostatic and orbital contributions are very tiny. In fact, no significant covalent character in the HG interactions was observed. The obtained results point strictly to NCIs, modulated by dispersion contributions. Regardless of whether the guests contain π‐electron‐rich or π‐electron‐poor moieties, and no significant charge‐transfer was observed. All in all, HG interactions between guests 3‐14 and host 2 are predominantly modulated by π‐π stacking.     

Synthesis of Dendritic Oligo‐Spiro(fluorene‐9,9′‐xanthene) Derivatives with Carbazole and Fluorene Pendants and their Thermal,Optical, and Electroluminescent Properties

Two novel spiro‐configured ter(arylene‐ethynylene) derivatives, TSF‐Cz and TSF‐F , have been designed and synthesized using spiro(fluorene‐9,9′‐xanthene) (SFX) as building blocks, introducing a hole‐transporting carbazole and a fluorene chromophore as the peripheral functional group into the backbone through an oxygen atom. The two well‐defined oligomers possess good solubility, film‐forming quality, and high T_g's at 140 and 126 °C, respectively. In addition, these oligomers exhibit blue photoluminescence (PL) emission both in solution and solid states. The double‐layered devices fabricated using the two materials as the emitter show a sky‐blue emission with a brightness and a current efficiency of 7 613 cd · m⁻² and 1.11 cd · A⁻¹ for TSF‐Cz , and 1 507 cd · m⁻² and 0.36 cd · A⁻¹ for TSF‐F , respectively.

     

Synthesis and Structural Characterization of ZnII α‐Diimine Complexes with Chloride and Thiocyanate Co‐Ligands

The preparation and spectroscopic and structural characterization of three Zn^II complexes with bis[N‐(2,6‐dimethylphenyl)imine]acenaphthene, L¹, and with bis[N‐(2‐ethylphenyl)imine]acenaphthene, L², are decribed herein. Two of the complexes were prepared from ZnCl₂ and the third from Zn(NCS)₂. One‐pot reaction techniques were used, leading to high yields. The complexes were characterized by microanalysis, IR and ¹H NMR spectroscopy, and single‐crystal X‐ray diffraction. The structures of the complexes are significantly different, with the chloride‐containing species forming distorted tetrahedra around the metal, whereas its thiocyanate analog is dimeric, with each metal at the center of a distorted square pyramid, with bridging and terminal [SCN]^– ligands.     

Coumarin‐tethered (benz)imidazolium salts and their silver(I) N‐heterocyclic carbene complexes: Synthesis,characterization, crystal structure and antibacterial studies

A series of new sterically modulated chlorocoumarin‐substituted (benz)imidazolium salts and their bis‐N‐heterocyclic carbene silver(I) complexes were prepared and characterized. The complexes were prepared in good yields following the in situ deprotonation method by treating azolium salts with silver(I) oxide in the dark. All the compounds were characterized using various spectroscopic and analytical methods. Additionally, one of the benzimidazolium salts was characterized using single‐crystal X‐ray diffraction technique. In this salt, intermolecular π–π stacking interactions operate between benzimidazole as well as coumarin heterocyclic systems with adjacent molecules. In the preliminary antibacterial studies, the silver complexes were found more active than the corresponding salts against a panel of bacterial strains. Interestingly, the complexes displayed improved antibacterial efficacy against Escherichia coli strain, comparable with that of the standard drug ampicillin.     

Tricolor Luminescence Switching by Thermal and Mechanical Stimuli in the Crystal Polymorphs of Pyridyl‐substituted Fluorene

Stimuli‐responsive organic luminescence‐switching materials have attracted much attention for a decade. Most of the reported examples display a reversible two‐color luminescence switching, and multicolor‐switching materials remain extremely rare. Herein, we report a simple organic molecule, 4,4′‐(9,9‐dimethyl‐9H‐fluorene‐2,7‐diyl)dipyridine ( MFDP ), which exhibits three different crystal polymorphs ( V‐MFDP , B‐MFDP and G‐MFDP ) with different luminescent colors. Furthermore, the three crystal polymorphs show a reversible tricolor fluorescent switching from violet to blue and to green upon physical stimuli. The single‐crystal structures of the three polymorphs were obtained, and the results indicate that the stimuli‐responsive properties of the three polymorphs come from the different stacking modes induced by intermolecular interactions. The competition between weak π–π stacking and weak hydrogen bonding is the main reason for the the phase transformations among the three crystal polymorphs.     

Synthesis,Crystal Structure,and Characterization of Two Oxamido‐bridged NiIICuIINiII Heteronuclear Complexes

Two new trinuclear complexes [Cu^II(Ni^IIX₁)₂(C₂H₅OH)₂]· (ClO₄)₂·2(CH₃OH) ( 1 ) and [Cu^II(Ni^IIX₂)₂(H₂O)]·(ClO₄)₂· 0.75(H₂O) ( 2 ) (X₁ = dianion of 5,6;13,14‐dibenzo‐7,12‐bis(ethoxycarboxyl)‐9‐methyl‐2,3‐dioxo‐1,4,8,11‐tetraazacyclotetradeca‐7,11‐diene. X₂ = dianion of 5,6;13,14‐dibenzo‐9,10‐cyclohexano‐7,12‐bis(ethoxycarboxyl)‐2,3‐dioxo‐1,4,8,11‐tetraazacyclotetradeca7,11‐diene.) have been synthesized and characterized by single crystal X‐ray analysis, elemental analysis, IR, UV and EPR spectroscopies. The complexes consist of Ni^IICu^IINi^II heteronuclear cationic entities. The central Cu^II atom of 1 lies in an octahedral coordination environment, while that of 2 resides in a square‐pyramidal coordination sphere. The adjacent trinuclear units of 1 are linked together through π‐π stacking interactions resulting in a 1D supramolecular chain, whereas the π‐π stacking interactions between the contiguous units of 2 lead to a 2D structure. The EPR spectra of the two complexes show a signal of an axially elongated octahedral Cu^II system in 1 and an axially elongated square‐pyramidal Cu^II system in 2 , respectively. The hyperfine splitting of the Cu^II atoms (I^Cu = 3/2) has also been observed in the EPR spectra.     

Synthesis and Crystal Structure of the Tris‐bidentate Carbonatobis‐(1,10‐phenanthroline‐N,N′)nickel(II), [Ni(C12H8N2)2(CO3)]

The tris‐bidentate complex [Ni(C₁₂H₈N₂)₂(CO₃)] was synthesized by the reaction of Na₂CO₃, 1,10‐phenanthroline (phen = C₁₂H₈N₂) and NiSO₄ · 6 H₂O in the presence of succinic acid in a CH₃OH–H₂O solution. The compound crystallizes as heptahydrate. The crystal structure (monoclinic, P2₁/c (no. 14), a = 9.897(1), b = 26.384(2), c = 10.582(1) Å, β = 105.87(1)°, Z = 4, R = 0.0505, wR² = 0.1029 for 3166 observed reflections (F ≥ 2σ(F ) out of 6100 unique reflections) consists of hydrogen bonded water molecules and [Ni(phen)₂(CO₃)] complex molecules. The Ni atoms are sixfold octahedrally coordinated by the four N atoms of two bidentate chelating phen ligands and by two O atoms of the bidentate chelating carbonate group with d(Ni–N) = 2.092–2.100 Å, d(Ni–O) = 2.051, 2.079 Å. The complex molecules are stacked into 2D corrugated layers parallel to (010) via two types of intermolecular π‐π stacking interactions. One occurs between two quinoline rings of neighboring phen ligands at the distance of 3.63 Å in [010] direction and the other results from 1D π‐π stacking interactions through partially covered phen rings at alternative distances of 3.26 Å and 3.33 Å in [001] direction. The water molecules are sandwiched between 2D layers.     

Synthesis,Crystal Structure and Properties of [Cu(phen)3][Cu(pheida)2]·10H2O and [(phen)2Cu(μ‐BAAP)Cu(μ‐BAAP)Cu(phen)2][Cu(BAAP)2]·8.5H2O (H2pheida = N‐phenetyl‐iminodiacetic acid,H2BAAP = N‐benzylaminoacetic‐2‐propionic acid)

The salts [Cu(phen)₃][Cu(pheida)₂]·10H₂O ( 1 ) and [(phen)₂Cu(μ‐BAAP)Cu(μ‐BAAP)Cu(phen)₂][Cu(BAAP)₂]·8.5H₂O ( 2 ) (H₂pheida = N‐phenetyl‐iminodiacetic acid, H₂BAAP = N‐benzylaminoacetic‐2‐propionic acid, phen = 1, 10‐phenanthroline) have been prepared and studied by thermal, spectroscopic and X‐ray diffraction methods. 1 has the rather unusual [Cu(phen)₃]²⁺ cation and two non‐equivalent [Cu(pheida)₂]^2— anions with a coordination type 4+2 but quite different tetragonality (T = 0.848 and 0.703 for anions 1 and 2, respectively). The crystal consists of multi‐π, π‐stacked chains (…anion 2 — cation — cation — anion 2…) connected by hydrophobic interactions; these chains build channels which are partially filled by anions 1 and water molecules. In contrast, compound 2 has a mixed‐ligand trinuclear cation with a bridging central moiety close similar to the counter anion. The formation of such a trinuclear cation is discussed as a consequence of the most advantageous molecular recognition process between [Cu(phen)₂(H₂O)_{1 or 2}]²⁺ and [Cu(BAAP)₂]^2— in solution. In the crystal of 2, multi‐π, π‐stacked arrays of C₆‐rings from phen and (BAAP)^2— ligands of trinuclear cations generate channels where counter anions and water molecules are located.     

Synthesis and micropatterning properties of a novel base‐soluble,positive‐working,photosensitive polyimide having an o‐nitrobenzyl ether group

A novel positive‐working, photosensitive polyimide, poly[1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐di(2‐nitrobenzyloxy)benzophenone‐3,3′,4,4′‐tetracarboxdiimide] (OPI‐Nb), developable with an aqueous base was prepared by the o‐nitrobenzylation of a polyimide, poly(1,4‐phenyleneoxy‐1,4‐phenylene‐2,2′‐dihydroxybenzophenone‐3,3′,4,4′‐tetracarboxdiimide) (OPI), derived from 2,2′‐dihydroxy‐3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (DHBA) and 4,4′‐oxydianiline, and it micropatterning properties were investigated. The o‐nitrobenzylation of OPI to OPI‐Nb was conducted with o‐nitrobenzyl bromide in N‐methyl‐2‐pyrrolidinone containing Et₃N. The DHBA monomer was synthesized by exhaustive KMnO₄ oxidation of bis(2‐dimethoxy‐3,4‐dimethylphenyl)methane obtained by etherification of bis(2‐hydroxy‐3,4‐dimethylphenyl)methane with iodomethane, followed by deprotection of the methoxy groups and cyclodehydration of the obtained 2,2′‐dihydroxy‐3,3′4,4′‐benzophenonetetracarboxylic acid. The intermediate bis(2‐hydroxy‐3,4‐dimethylphenyl)methane was prepared by the condensation of 2,3‐dimethylphenol with paraformaldehyde. The degree of o‐nitrobenzylation was determined to be over 94 mol % from ¹H NMR absorption of benzylic CH₂ protons. The aromatic OPI was perfectly soluble in a dilute aqueous NaOH solution and tetramethylammonium hydroxide (TMAH), whereas OPI‐Nb was not even swellable in them. In the micropatterning process, OPI‐Nb showed a line‐width resolution of 0.4‐μm and a sensitivity of 5.4 J/cm² when its thin films were irradiated with 365‐nm light and developed with a 2.38% aqueous TMAH solution at room temperature for 90 s. The thickness loss of OPI‐Nb films measured after postbaking at 350 °C was in the 8–9% range. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 776–788, 2007     

Three AgI,CuI and CdII coordination polymers based on the new asymmetrical ligand 2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole: syntheses,characterization and emission properties

The new asymmetrical organic ligand 2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole ( L , C₁₇H₁₃N₅O), containing pyridine and imidazole terminal groups, as well as potential oxdiazole coordination sites, was designed and synthesized. The coordination chemistry of L with soft Ag^I, Cu^I and Cd^II metal ions was investigated and three new coordination polymers (CPs), namely, catena‐poly[[silver(I)‐μ‐2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole] hexafluoridophosphate], {[Ag( L )]PF₆}_n, catena‐poly[[copper(I)‐di‐μ‐iodido‐copper(I)‐bis(μ‐2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole)] 1,4‐dioxane monosolvate], {[Cu₂I₂( L )₂]·C₄H₈O₂}_n, and catena‐poly[[[dinitratocopper(II)]‐bis(μ‐2‐{4‐[(1H‐imidazol‐1‐yl)methyl]phenyl}‐5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazole)]–methanol–water (1/1/0.65)], {[Cd( L )₂(NO₃)₂]·2CH₄O·0.65H₂O}_n, were obtained. The experimental results show that ligand L coordinates easily with linear Ag^I, tetrahedral Cu^I and octahedral Cd^II metal atoms to form one‐dimensional polymeric structures. The intermediate oxadiazole ring does not participate in the coordination interactions with the metal ions. In all three CPs, weak π–π interactions between the nearly coplanar pyridine, oxadiazole and benzene rings play an important role in the packing of the polymeric chains.     

Synthesis,characterization and crystal structure of the new pentahydrate of bis(2,2′‐bipyridine‐κ2N,N′)(oxalato‐κ2O1,O2)nickel(II)

The reaction of NiCl₂, K₂C₂O₄·H₂O and 2,2′‐bipyridine (bpy) in water–ethanol solution at 281 K yields light‐purple needles of the new pentahydrate of bis(2,2′‐bipyridine)oxalatonickel(II), [Ni(C₂O₄)(C₁₀H₈N₂)₂]·5H₂O or [Ni(ox)(bpy)₂]·5H₂O, while at room temperature, deep‐pink prisms of the previously reported tetrahydrate [Ni(ox)(bpy)₂]·4H₂O [Román, Luque, Guzmán‐Miralles & Beitia (1995), Polyhedron, 14 , 2863–2869] were gathered. The asymmetric unit in the crystal structure of the new pentahydrate incorporates the discrete molecular complex [Ni(ox)(bpy)₂] and five solvent water molecules. Within the complex molecule, all three ligands are bonded as chelates. The complex molecules are involved in an extended system of hydrogen bonds with the solvent water molecules. Additionally, π–π interactions also contribute to the stabilization of the extended structure. The dehydration of the pentahydrate starts at 323 K and proceeds in at least two steps as determined by thermal analysis.     

Synthesis and characterization of organosoluble polyimides with trifluoromethyl‐substituted benzene in the side chain

New aromatic diamines substituted with a trifluoromethyl group in the side chain, 2,4‐diamino‐3′‐trifluoromethylazobenzene, 2,4‐diamino‐1‐[(4′‐trifluoromethylphenoxy) phenyl] aniline, and 3,5‐diamino‐1‐[(4′‐trifluoromethyl phenoxy) phenyl] benzamide were synthesized and characterized and used to prepare polyimides by a one‐step high‐temperature polycondensation method. Experimental results indicated that the prepared polyimides possess good solubility in strong organic solvents such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylformamide, and N,N′‐dimethylacetamide. Homogeneous solutions with solid contents as high as 15–20% can be prepared, which are stable for storing longer than 2 weeks at room temperature. The polyimides exhibited glass‐transition temperatures of 249–292 °C and good thermal stability. The PI‐I_c and PI‐III_c films prepared by casting the fully imidized polymer solutions showed good transparency with cutoff wavelengths at 320–330 nm. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1572–1582, 2002     

Synthesis and characterization of organo‐soluble polyamides containing triaryl imidazole pendant and ether linkage moieties: thermal,photophysical, and chemiluminescent properties

A new symmetrical diamine monomer containing a triaryl imidazole pendant group was successfully synthesized by the nucleophilic substitution of hydroquinone with the synthesized 2‐(2‐chloro‐5‐nitrophenyl)‐4, 5‐diphenyl‐1H‐imidazole (I). A series of novel polyamides were prepared from the diamine monomer and various aliphatic and aromatic dicarboxylic acids via phosphorylation polyamidation. These polyamides are readily soluble in many organic solvents; their inherent viscosities ranged from 0.68 to 0.89 dl/g and gave tough and flexible films by solution‐casting. They had useful levels of thermal stability associated with relatively high T_gs (186–278°C), 10% weight loss temperatures in the range of 355–482°C, and char yields at 600°C in air up to 67%. All the polyamides have fluorescence emission in dilute (0.2 g/dl) DMAc solution with maxima at 425–495 nm and with the quantum yields in the range 14–28%. The chemiluminescence activity of polyamides was also studied in the presence of peroxyoxalate. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis,crystal structure and magnetic properties of (acetato‐κ2O,O′)bis(5,5′‐dimethyl‐2,2′‐bipyridine‐κ2N,N′)nickel(II) perchlorate monohydrate

The title hydrated ionic complex, [Ni(CH₃COO)(C₁₂H₁₂N₂)₂]ClO₄·H₂O or [Ni(ac)(5,5′‐dmbpy)₂]ClO₄·H₂O (where 5,5′‐dmbpy is 5,5′‐dimethyl‐2,2′‐bipyridine and ac is acetate), (1), was isolated as violet crystals from the aqueous ethanolic nickel acetate–5,5′‐dmbpy–KClO₄ system. Within the complex cation, the Ni^II atom is hexacoordinated by two chelating 5,5′‐dmbpy ligands and one chelating ac ligand. The mean Ni—N and Ni—O bond lengths are 2.0628 (17) and 2.1341 (15) Å, respectively. The water solvent molecule is disordered over two partially occupied positions and links two complex cations and two perchlorate anions into hydrogen‐bonded centrosymmetric dimers, which are further connected by π–π interactions. The magnetic properties of (1) at low temperatures are governed by the action of single‐ion anisotropy, D, which arises from the reduced local symmetry of the cis‐NiO₂N₄ chromophore. The fitting of the variable‐temperature magnetic data (2–300 K) gives g_iso = 2.134 and D/hc = 3.13 cm⁻¹.     

A Novel Metal–Ligand Iodo‐bridged Lead(II) Compound: Synthesis,Crystal Structure,Thermal Properties,and DFT Calculations of [Pb(dmp)I2]n

. A novel 1D Pb^II coordination polymer [Pb(dmp)I₂]_n ( 1 ) (dmp = 2,9‐dimethyl‐1,10‐phenanthroline) containing a Pb₂‐(μ‐I)₂ unit was synthesized and characterized by elemental analysis, IR, ¹H NMR, and ¹³C NMR spectroscopy and studied by thermal analysis as well as X‐ray crystallography. The single‐crystal X‐ray data show that the coordination number of Pb^II ions is six, i.e. PbN₂I₄, with “stereo‐chemically active” electron lone pairs, and the coordination sphere is asymmetrical. They also show that the chains interact with each other through π‐π stacking interactions, which create a 3D framework. The structure of the title complex has been optimized by density functional theory calculations. The calculated structural parameters and the IR spectra of the title complex are in agreement with the crystal structure.     

Zinc(II) and Cadmium(II) Complexes of the 3‐(2‐Pyridyl)‐5,6‐diphenyl‐1,2,4‐triazine (PDPT) Ligand,Structural Studies of [Zn(PDPT)2Cl(ClO4)] and [Cd(PDPT)2(NO3)(ClO4)]

Two new mixed‐anion zinc(II) and cadmium(II) complexes of 3‐(2‐pyridyl)‐5,6‐diphenyl‐1,2,4‐triazine (PDPT) ligand, [Zn(PDPT)₂Cl(ClO₄)] and [Cd(PDPT)₂(NO₃)(ClO₄)], have been synthesized and characterized by elemental analysis, IR‐ and ¹H NMR spectroscopy. The single crystal X‐ray analyses show that the coordination number in these complexes is six with four N‐donor atoms from two “PDPT” ligand and two of the anionic ligands, ZnN₄ClO_perchlorate, CdN₄O_nitrateO_perchlorate. Self‐assembly of these compounds in the solid state via π–π‐stacking interactions is discussed.