Ionic conductivity of multiarm star polymer/LiClO4 electrolytes

A series of polymer electrolytes based on multiarm polymers and lithium salt complexes were characterized by Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), and impedance measurement. The relationships of conductivity with salt concentration, temperature, and arm numbers are discussed. It is suggested that the star polymer has a higher solvency and ion transfer ability on lithium salts than on linear polymers. The conductivity maximum appeared at a higher salt concentration ([EO]/[Li] = 4). Impedance measurement suggested that the optimum conductivity was 2 × 10^?4 s · cm^?1. The conductivity increased with temperature and the dependence of ionic conductivity on temperature fits the Arrhenius equation. Among the studied systems, the star polymer with a five arm number performs better than other structures. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4195–4198, 2004     

Covalently stabilized vesicles derived from amphiphilic multiarm star polymers: Preparation,characterization, and their capability of hosting different polarity of guests

The large amount of terminal hydroxyl groups of amphiphilic multiarm star copolymers with hyperbranched polyethylenimine (PEI) as the hydrophilic core and poly(ε‐caprolactone) (PCL) arms as the hydrophobic shell were completely transformed into the radical‐crosslinkable methacrylate (MA) groups. The resulting PEI‐b‐PCL‐MA polymers could self‐assemble into vesicles in water, which was verified by dynamic light scattering (DLS) and transmission electron microscopy (TEM). After crosslinking the intravesicular MA groups, covalently stabilized vesicles (CSVs) were generated. These CSVs were further characterized by DLS and TEM, and it was found that the corona of the vesicles was not the simple double‐layer structure, but contained a certain amount of PEI‐b‐PCL unimolecular micellar units between the double‐layer. These CSVs could accommodate both apolar and polar guests using their hydrophobic PCL zones and void cores, respectively. Moreover, these CSVs showed superior capacities for apolar guests to their noncrosslinked precursors and the corresponding traditional amphiphilic multishell star polymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of a new multiarm star polymer based on hyperbranched poly(styrene) core and poly(ε‐caprolactone) arms and its use as reactive modifier of epoxy thermosets

A well‐defined multiarm star copolymer poly(styrene)‐b‐poly(ε‐caprolactone) (PSOH‐b‐PCL) with an average number of PCL arms per molecule of 60 has been prepared. 4‐Chloromethyl styrene (4‐CMS) was polymerized by means of atom transfer radical polymerization (ATRP) to obtain a hyperbranched poly(styrene) with chlorines as terminal groups. Subsequently, chlorines were substituted by reaction with diisopropanolamine (DIPA) to give the hydroxyl‐ended derivative. Finally, the hydroxyl‐ended hyperbranched poly(styrene) has been used as a macroinitiator core to polymerize ε‐caprolactone by means of cationic ring‐opening polymerization so as to obtain the star copolymer. In a second step, PSOH‐b‐PCL was used as reactive modifier of diglycidylether of bisphenol A formulations cured by 1‐methyl imidazole (1‐MI) obtaining nanostructured thermosets. The curing process was studied by dynamic scanning calorimetry and Fourier transform infrared spectroscopy (FTIR). By rheometry, the effect of this new polymer topology on the complex viscosity (η*) of the reactive mixture and on the gelation process was also analyzed. The thermomechanical characteristics of the modified materials were determined. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of star polyfluorenes with a C60 core

C60‐cored star polyfluorenes were synthesized and fully characterized. A high yield (81%) hexakisaddition of C60 was developed by using Prato reaction and bulky fluorene addends. Suzuki polycondensation of the hexakisadducts of C60 carrying six 2‐bromofluorene addends and AB‐type monomer (2‐bromo‐9,9‐dioctylfluorenyl‐4,4,5,5‐tetramethyl‐ [1,3,2]‐dioxaborane) with Pd(PPh₃)₄ as the catalyst precursor afforded the desired C60‐cored star polyfluorenes. Their three‐dimensional structure can effectively reduce the aggregation of the polyfluorene chains. Annealing studies indicated that the C60‐cored star polyfluorenes are of good color stability. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4696–4706, 2007     

Synthesis and characterization of multiarm (Benzoin-PS)m-polyDVB star polymer as a polymeric photoinitiator for polymerization of acrylates and methacrylates

In this study, a new benzoin-based multi-arm star polymer was synthesized by using ATRP, and characterization was achieved by spectrophotometric and chromatographic methods. Obtained multiarm (Benzoin-PS)_m-polyDVB star polymer was employed as a polymeric photoinitiator for polymerization of methacrylates and acrylates. Photophysical properties of this initiator were determined by fluorescence and phosphorescence measurements, the phosphorescence lifetime was calculated as 29 ms hence the lowest triplet state nature was n-π* character, and laser flash photolysis technique was additionally used to get more information about triplet state and triplet lifetime which was calculated as 1.34 ms. Photokinetics of difunctional acrylate such as HDDA was studied with a multi-arm (Benzoin-PS)_m-polyDVB star polymeric initiator using Photo-DSC.     

Core–shell‐type multiarm star polyethylenimine‐block‐poly(ε‐caprolactone): Synthesis and guest encapsulation potential

Novel multiarm star copolymers with poly(?‐caprolactone) (PCL) as the arms and hyperbranched polyethylenimine (HPEI) as the core have been successfully prepared by the tin(II) 2‐ethylhexanoate catalyzed ring‐opening polymerization of ?‐caprolactone (CL) with HPEI used directly as a macroinitiator. Not only primary but also secondary amine groups of HPEI participate in initiating the ring‐opening polymerization of CL with almost 100% initiation efficiency. The average degree of polymerization of the PCL arms can be controlled by the feed ratio of the monomers to the initiating sites. Because of the polarity difference of the PCL arms and HPEI core, the obtained multiarm star polymers display an inverted micellar structure with potential extraction and encapsulation of water‐soluble guests. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4165–4173, 2006     

Synthesis,characterization, and rheological properties of multiarm stars with poly(glycidol) core and poly(methyl methacrylate) arms by AGET ATRP

Well‐defined multiarm star block copolymers poly(glycidol)‐b‐poly(methyl methacrylate) (PGOHBr‐b‐PMMA_x) with an average number of PMMA arms of 85, 55, and 45 have been prepared. The core‐first approach has been selected as the methodology using atom transfer radical polymerization (ATRP) of MMA from an activated hyperbranched poly(glycidol) as the core. These activated hyperbranched macroinitiators were prepared by esterification of hyperbranched poly(glycidol) (PGOH) with 2‐bromoisobutyryl bromide. The effect of monomer/initiator ratio, catalyst concentration, time, temperature, and solvent on the growing of the arms has been studied in detail in order to optimize the process and to diminish the radical‐radical coupling. The final products and intermediates were characterized by means of size exclusion chromatography (SEC), nuclear magnetic resonance (NMR) and Fourier transform‐infrared (FTIR) spectroscopy. The length of PMMA arms was determined by SEC after cleavage of ester bond linked to PGOH core. Glass transition temperature (T_g), thermal stability and rheological properties of the multiarm star copolymers were also studied. Finally, tapping mode atomic force microscopy (TMAFM) allowed the clear visualization of nano‐sized particles (80–200 nm) corresponding to individual star molecules. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of a multiarm poly(acrylic acid) star polymer for application in sustained delivery of cisplatin and a nitric oxide prodrug

Functionalized polymeric nanocarriers have been recognized as drug delivery platforms for delivering therapeutic concentrations of chemotherapies. Of this category, star‐shaped multiarm polymers are emerging candidates for targeted delivery of anticancer drugs, due to their compact structure, narrow size distribution, large surface area, and high water solubility. In this study, we synthesized a multiarm poly(acrylic acid) star polymer via macromolecular design via the interchange (MADIX)/reversible addition fragmentation chain transfer (MADIX/RAFT) polymerization and characterized it using nuclear magnetic resonance (NMR) and size exclusion chromatography. The poly(acrylic acid) star polymer demonstrated excellent water solubility and extremely low viscosity, making it highly suited for targeted drug delivery. Subsequently, we selected a hydrophilic drug, cisplatin, and a hydrophobic nitric oxide (NO)‐donating prodrug, O²‐(2,4‐dinitrophenyl) 1‐[4‐(2‐hydroxy)ethyl]‐3‐methylpiperazin‐1‐yl]diazen‐1‐ium‐1,2‐diolate, as two model compounds to evaluate the feasibility of using poly(acrylic acid) star polymers for the delivery of chemotherapeutics. After synthesizing and characterizing two poly(acrylic acid) star polymer‐based nanoconjugates, poly(acrylic acid)–cisplatin (acid–Pt) and poly(acrylic acid–NO (acid–NO) prodrug, the in vitro drug release kinetics of both the acid–Pt and the acid–NO were determined at physiological conditions. In summary, we have designed and evaluated a polymeric nanocarrier for sustained‐delivery of chemotherapies, either as a single treatment or a combination therapy regimen. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of two classes of hyperstar polymers bearing hyperbranched cores grafted with linear arms

New hyperstar polymers (HSP) consisting of two different hyperbranched (hb) aromatic/aliphatic cores grafted with linear polymer arms were successfully synthesized. The hb cores were based on either hb poly(vinylbenzylchloride) synthesized by SCVP‐ATRP or hb polyester from a polycondensation reaction. For the core‐first approach, the hb cores have been modified to hb macroinitiators initiating either the cationic ring‐opening polymerization of oxazolines (Oxa) or the atom transfer radical polymerization of alkylmethacrylates. For potential use as reactive binders in epoxy coatings the HSPs were equipped with a defined amount of OH‐groups during arm growth via controlled block‐copolymerization with nonfunctionalized and OH‐functionalized monomers, either an oxazoline (OH)Oxa (2‐[1‐(hydroxymethyl)ethyl]‐oxazoline) or a methacrylate HEMA (2‐hydroxyethyl methacrylate). The amount of OH‐groups could be well adjusted in this way. The hyperstars were comprehensively characterized with respect to chemical structure and molecule dimension. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 000: 000–000, 2012     

Minimally adhesive polymer surfaces prepared from star oligosiloxanes and star oligofluorosiloxanes

The effects of the surface energy, storage modulus (G′), and glass‐transition temperature (T_g) on the biofouling behavior of siloxane and fluorosiloxane polymer surfaces (films) were studied. Irregular Si? H‐terminated tetrabranched star oligosiloxanes and star oligofluorosiloxanes were prepared by the acid‐catalyzed equilibration of octamethylcyclotetrasiloxane or 1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane with tetrakis(dimethylsiloxy)silane, respectively. Terminal epoxy groups were introduced via Pt‐catalyzed hydrosilylation with allyl glycidyl ether to yield compounds that were subsequently crosslinked with α,ω‐bis(3‐aminopropyl)poly(dimethylsiloxane). The resulting films were characterized by goniometry, dynamic mechanical thermal analysis, and thermogravimetric analysis. The foul‐release behavior was studied by the measurement of how strongly sporelings (young plants) of the green seaweed Ulva adhered. The corrosion protection of aluminum was evaluated by electrochemical impedance spectroscopy. Fluorosiloxane films displayed higher G′ and T_g values, decreased contact angles (with water), and more effectively released Ulva sporelings in comparison with siloxane films. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2551–2566, 2006     

Synthesis,characterization, and star polymer assembly of boronic acid end‐functionalized polycaprolactone

Boronic acid end‐functionalized polycaprolactone (PCL) polymers were synthesized by ring‐opening polymerization using a pinacol boronate ester‐containing (Bpin) initiator. The polymerization provides access to boron‐terminated polymers (i.e. Bpin‐PCL‐OH) with narrow molecular weight distributions (PDI = 1.09). Postsynthetic manipulation of the polymer's terminal hydroxyl group by copper‐catalyzed azide‐alkyne cycloaddition chemistry provides a series of bis end‐functionalized polymers with significant structural diversity at the termini. Deprotection of the boronate ester end group was accomplished with an acidic solid phase DOWEX resin. The boronate ester deprotection methodology does not result in hydrolysis of the polymeric backbone. The boronic acid‐tipped polymers were converted into star polymer assemblies using thermal dehydration and ligand‐facilitated trimerization. Thermal dehydration of (HO)₂B‐PCL‐OAc to the corresponding boroxine‐based star polymer assembly was inefficient and lead to degradation products. Ligand‐facilitated trimerization using either pyridine or 7‐azaindole as the Lewis base was efficient and mild. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis of mikto‐topology star polymer containing one cyclic arm

Well‐defined mikto‐topology star polystyrene composed of one cyclic arm and four linear arms was synthesized by a combination of atom transfer radical polymerization (ATRP) and Cu‐catalyzed azide‐alkyne cycloaddition (CuAAC) click reaction. First, the bromine‐alkyne α,ω‐linear polystyrenes containing four hydroxyl groups protected with acetone‐based ketal groups were synthesized by ATRP of styrene using a designed initiator. Then, the bromine end‐group was converted to the azide and the linear polystyrene was cyclized intra‐molecularly by the CuAAC reaction. The four hydroxyl groups were released by deprotection and then esterified with 2‐bromoisobutyryl bromide to produce a cyclic polymer bearing four ATRP initiating units. By subsequent ATRP of styrene to grow linear polymers with the cyclic polystyrene as a macroinitiator, the mikto‐topology star polymers were prepared. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Hydrophilic,cationic large‐core star polymers and polymer networks: Synthesis and physicochemical characterization

Group transfer polymerization was used to prepare hydrophilic, cationic large‐core star polymers (LCSPs) and networks of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and ethylene glycol dimethacrylate (EGDMA) in a two‐step procedure involving the synthesis of linear DMAEMA arms, followed by their crosslinking using a mixture of DMAEMA monomer and EGDMA crosslinker. The degree of polymerization of the linear chains prepared in the first step was kept constant, while the composition of the crosslinking mixture was varied systematically at a constant amount of crosslinker. The monomer/crosslinker molar ratio determined whether LCSPs or polymer networks would be produced. In particular, a high monomer/crosslinker molar ratio led to the formation of networks, whereas LCSPs were formed when a low monomer/crosslinker molar ratio was used. The absolute weight‐average molecular weight of the LCSPs was determined using static light scattering, whereas their hydrodynamic radii and radii of gyration were determined using dynamic light scattering and small‐angle neutron scattering, respectively. The sol fraction extracted from the networks decreased as the monomer/crosslinker molar ratio increased. The degrees of swelling of all of the networks were measured as a function of pH and were found to increase below pH 7. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3958–3969, 2008     

Multiarm star nanocarriers containing a poly(ethylene imine) core and polylactide arms

Star polymers (SPs) containing a hyperbranched poly(ethylene imine) (PEI; number‐average molecular weight = 10,000) core and polylactide arms were synthesized via the ring‐opening polymerization of lactide. PEI was used as a multifunctional macroinitiator for the ring‐opening polymerization of lactide. Different lactide monomer/amino‐functional group (LA/NH_n; n = 1 or 2) ratios were used for preparing SPs with different molecular weights. SPs were able to encapsulate small guest molecules such as Rose Bengal; they also transported small, hydrophilic molecules from water to the organic phase. The transport capacity of all the nanocarriers depended on the LA/NH_n ratio used for synthesizing the SPs. Nanocarriers with a higher LA/NH_n ratio had higher transport capacities. The size of all the nanocarriers depended on the type of solvent. In chloroform, these nanoparticles had several sizes that were related to the self‐assembly of these nanocarriers, but in acetone, they were monodisperse, and their size was smaller than that in chloroform. Also, the transport of polar dyes from water to the chloroform phase was possible. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5740–5749, 2006     

Synthesis of cationic hyperbranched multiarm copolymer and its application in self-reducing and stabilizing gold nanoparticles

A novel hyperbranched multiarm copolymer of HBPO-star-PDEAEMA with a hydrophobic poly(3-ethyl-3-(hydroxymethyl) oxetane)(HBPO) core and many cationic poly(2-(N,N-diethylamino) ethyl methacrylate)(PDEAEMA) arms has been synthesized through an atom transfer radical polymerization(ATRP) method,and been applied to spontaneously reduce and stabilize gold nanoparticles(AuNPs) in water without other additional agents.The size of the nanoparticles could be effectively controlled at about 4 nm,and the nanoparticles ...     

Synthesis and Characterization of Crosslinked Hyperbranched Polyglycidol Hydrogel Films

Hyperbranched polyglycidol (PGLD) was synthesized via anionic ring‐opening polymerization of glycidol using a special anionic initiator with multiple initiation sites. The resultant polymers were characterized by ¹H and ¹³C‐NMR spectra for confirming their structures, which consisted of linear, hyperbranched and dendritic structures. Molecular weight characteristics were determined by means of the gel permeation chromatography (GPC). With the intention of investigating the possibility of broad applications, PGLD hydrogel films were prepared using various crosslinking agents, i.e., glutaraldehyde and some dicarboxylic acids, and their physical properties such as swelling behavior and tensile (or Young's) modulus were measured and compared.     

Degradable polymer networks and star polymers based on mixtures of two cleavable dimethacrylate crosslinkers: Synthesis,characterization, and degradation

Mixtures of two cleavable dimethacrylate crosslinkers, the hydrolyzable di(methacryloyloxy‐1‐ethoxy)methane (DMOEM) and the thermolyzable 1,1‐ethylenediol dimethacrylate (EDDMA), were used for the preparation of neat crosslinker polymer networks, randomly crosslinked polymer networks of methyl methacrylate (MMA), and star polymers of MMA, using group transfer polymerization in tetrahydrofuran (THF). All star polymers and randomly crosslinked polymer networks containing mixtures of the hydrolyzable DMOEM and the thermolyzable EDDMA crosslinkers gave THF‐soluble final products when subjected to sequential thermolysis and hydrolysis, in this order. When applying sequential hydrolysis and thermolysis, only the star polymers with an EDDMA crosslinker content equal to or higher than 50% gave THF‐soluble final products. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5853–5870, 2009     

Synthesis of ABCD‐type miktoarm star copolymers and transformation into zwitterionic star copolymers

ABCD‐type 4‐miktoarm star copolymers of styrene (St), α‐methylstyrene (αMSt), tert‐butyl methacrylate (tBuMA), and 4‐vinylpyridine (4VP) were synthesized via anionic polymerization using 1,3‐bis(1‐phenylvinyl)benzene (m‐DDPE) as the linking molecule. The synthetic route was rationally designed with respect to the reactivity of individual propagating anion towards the double bond of m‐DDPE. Thus the synthesis includes several consecutive key reactions, for example, the monoaddition of polystyryllithium towards m‐DDPE, the polymerization of tBuMA initiated by the resulting monoadduct to produce a diblock macromonomer, the coupling of the macromonomer with poly(α‐methylstyryl)lithium to form a 3‐arm star anion, and the polymerization of 4‐vinylpyridine initiated by the star anion. These reactions were conducted either in a one‐pot process, in which the diblock macromonomer was in situ coupled with poly(α‐methylstyryl)lithium, or in a batch polymerization process, in which the same diblock macromonomer was separated. The final product was hydrolyzed to produce a zwitterionic miktoarm star copolymer, which was soluble at lower pH but insoluble in neutral and basic solution. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4818–4828, 2007     

Thermolyzable polymer networks and star polymers containing a novel,compact, degradable acylal‐based dimethacrylate cross‐linker: Synthesis,characterization, and thermolysis

A compact, cleavable acylal dimethacrylate cross‐linker, 1,1‐ethylenediol dimethacrylate (EDDMA), was synthesized from the anhydrous iron(III) chloride‐catalyzed reaction between methacrylic anhydride and acetaldehyde. The ability of EDDMA to act as cross‐linker was demonstrated by using it for the preparation of one neat cross‐linker network, four star polymers of methyl methacrylate (MMA), and four randomly cross‐linked MMA polymer networks using group transfer polymerization (GTP). For comparison, the corresponding polymer structures based on the commercially available ethylene glycol dimethacrylate (EGDMA) cross‐linker (isomer of EDDMA) were also prepared via GTP. The number of arms of the EDDMA‐based star polymers was lower than that of the corresponding EGDMA polymers, whereas the degrees of swelling in tetrahydrofuran of the EDDMA‐based MMA networks were higher than those of their EGDMA‐based counterparts. Although none of the EDDMA‐containing polymers could be cleanly hydrolyzed under basic or acidic conditions, they could be thermolyzed at 200 °C within 1 day giving lower molecular weight products. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5811–5823, 2007     

Maleimide‐based thiol reactive multiarm star polymers via Diels‐Alder/retro Diels‐Alder strategy

Multiarm star polymers containing thiol‐reactive maleimide groups at their core have been synthesized by utilization of atom transfer radical polymerization (ATRP) of various methacrylates using a masked maleimide containing multiarm initiator. One end of the initiator contains multiple halogen groups that produce the star architecture upon polymerization and the other end contains a masked maleimide functional group. Unmasking of the maleimide group after the polymerization provides the thiol reactive maleimide core that is widely used in bioconjugation. Functionalization of the core maleimide group with a thiol containing tripeptide was used to demonstrate facile reactivity of the core of these multiarm polymers under reagent‐free conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2546–2556, 2010