Facile synthesis of AB2‐type miktoarm star polymers through the combination of atom transfer radical polymerization and ring‐opening polymerization

A novel miktofunctional initiator ( 1 ), 2‐hydroxyethyl 3‐[(2‐bromopropanoyl)oxy]‐2‐{[(2‐bromopropanoyl)oxy]methyl}‐2‐methyl‐propanoate, possessing one initiating site for ring‐opening polymerization (ROP) and two initiating sites for atom transfer radical polymerization (ATRP), was synthesized in a three‐step reaction sequence. This initiator was first used in the ROP of ?‐caprolactone, and this led to a corresponding polymer with secondary bromide end groups. The obtained poly(?‐caprolactone) (PCL) was then used as a macroinitiator for the ATRP of tert‐butyl acrylate or methyl methacrylate, and this resulted in AB₂‐type PCL–[poly(tert‐butyl acrylate)]₂ or PCL–[poly(methyl methacrylate)]₂ miktoarm star polymers with controlled molecular weights and low polydispersities (weight‐average molecular weight/number‐average molecular weight < 1.23) via the ROP–ATRP sequence. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2313–2320, 2004     

Preparation of 3‐arm star polymers (A3) via Diels–Alder click reaction

Diels–Alder click reaction was successfully applied for the preparation of 3‐arm star polymers (A₃) using furan protected maleimide end‐functionalized polymers and trianthracene functional linking agent (2) at reflux temperature of toluene for 48 h. Well‐defined furan protected maleimide end‐functionalized polymers, poly (ethylene glycol), poly(methyl methacrylate), and poly(tert‐butyl acrylate) were obtained by esterification or atom transfer radical polymerization. Obtained star polymers were characterized via NMR and GPC (refractive index and triple detector detection). Splitting of GPC traces of the resulting polymer mixture notably displayed that Diels–Alder click reaction was a versatile and a reliable route for the preparation of A₃ star polymer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 302–313, 2008     

Multiblock poly(4‐vinylpyridine) and its copolymer prepared with cyclic trithiocarbonate as a reversible addition–fragmentation transfer agent

The polymerization of 4‐vinylpyridine was conducted in the presence of a cyclic trithiocarbonate (4,7‐diphenyl‐[1,3]dithiepane‐2‐thione) as a reversible addition–fragmentation transfer (RAFT) polymerization agent, and a multiblock polymer with narrow‐polydispersity blocks was prepared. Two kinds of multiblock copolymers of styrene and 4‐vinylpyridine, that is, (ABA)_n multi‐triblock copolymers with polystyrene or poly(4‐vinylpyridine) as the outer blocks, were prepared with multiblock polystyrene or poly(4‐vinylpyridine) as a macro‐RAFT agent, respectively. GPC data for the original polymers and polymers cleaved by amine demonstrated the successful synthesis of amphiphilic multiblock copolymers of styrene and 4‐vinylpyridine via two‐step polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2617–2623, 2007     

Study on the preparation and the self‐assembly of poly(propyleneimine)–poly(styrene) nanoparticles

Using 2‐chloropropionamide derivative of poly(propyleneimine) dendrimer DAB‐dendr‐(NH₂)₃₂ (DAB‐32‐Cl) as the macroinitiator, atom transfer radical polymerization of styrene was successfully carried out in DMF medium. The monodisperse poly(propyleneimine)–polystyrene (dendrimer–PSt) particles with diameters smaller than 100 nm could be prepared. The morphology, size, and size distribution of the dendrimer–PSt particles were characterized by transmission electron microscopy (TEM) and photon correlation spectroscopy (PCS). The effects of reaction temperature, the ratio of St/macroinitiator, and reaction time on the size, and size distribution of the dendrimer–PSt nanoparticles were investigated. In a selective solvent (DMF/H₂O), polymers can self‐assemble into different aggregate configurations such as regular microsphere and wire‐like thread. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2658–2666, 2008     

Free radical and thermal curing of terpyridine‐modified terpolymers

Terpolymers bearing terpyridine as well as (meth)acrylates as free radical curable groups (UV‐curing) or hydroxyl groups (thermal curing with bis‐isocyanates) were synthesized and characterized using ¹H NMR, IR and UV‐vis spectroscopy as well as GPC. Subsequently, the ability of covalent crosslinking via the UV‐initiated polymerization of the acrylate groups was investigated. Moreover, the thermal covalent crosslinking via the reaction of hydroxyl functionalized terpolymer and bis‐isocyanate compounds could be successfully achieved. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4028–4035, 2004     

ABA‐type liquid crystalline triblock copolymers via nitroxide‐mediated radical polymerization: Design,synthesis, and morphologies

We have designed and synthesized rod–coil–rod triblock copolymers of controlled molecular weight by two‐step nitroxide‐mediated radical polymerization, where the rod part consists of “mesogen‐jacketed liquid crystalline polymer” (MJLCP). The MJLCP segment examined in our studies is poly{2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene} (MPCS) while the coil part is polyisoprene (PI). Characterization of the triblock copolymers by GPC, ¹H and ¹³C NMR spectroscopies, TGA, DSC confirmed that the triblock copolymers were comprised of microphase‐separated low T_g amorphous PI and high T_g PMPCS blocks. Analysis of POM and 1D, 2D‐WAXD demonstrated that the triblock copolymers formed nematic liquid crystal phase. Morphological studies using TEM indicated the sample formed lamellar structure. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5949–5956, 2007     

Synthesis and characterization of well‐defined poly(2‐hydroxyethyl methacrylate‐co‐styrene)‐graft‐poly(ε‐caprolactone) by sequential controlled polymerization

A new graft copolymer, poly(2‐hydroxyethyl methacrylate‐co‐styrene) ‐graft‐poly(?‐caprolactone), was prepared by combination of reversible addition‐fragmentation chain transfer polymerization (RAFT) with coordination‐insertion ring‐opening polymerization (ROP). The copolymerization of styrene (St) and 2‐hydroxyethyl methacrylate (HEMA) was carried out at 60 °C in the presence of 2‐phenylprop‐2‐yl dithiobenzoate (PPDTB) using AIBN as initiator. The molecular weight of poly (2‐hydroxyethyl methacrylate‐co‐styrene) [poly(HEMA‐co‐St)] increased with the monomer conversion, and the molecular weight distribution was in the range of 1.09 ～ 1.39. The ring‐opening polymerization (ROP) of ?‐caprolactone was then initiated by the hydroxyl groups of the poly(HEMA‐co‐St) precursors in the presence of stannous octoate (Sn(Oct)₂). GPC and ¹H‐NMR data demonstrated the polymerization courses are under control, and nearly all hydroxyl groups took part in the initiation. The efficiency of grafting was very high. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5523–5529, 2004     

Preparation and characterization of biodegradable poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone) copolymers

A series of poly(trimethylenecarbonate‐ε‐caprolactone)‐block‐poly(p‐dioxanone) copolymers were prepared with varying feed rations by using two step polymerization reactions. Poly(trimethylenecarbonate)(ε‐caprolactone) random copolymer was synthesized with stannous‐2‐ethylhexanoate and followed by adding p‐dioxanone monomer as the other block. The ring opening polymerization was carried out at high temperature and long reaction time to get high molecular weight polymers. The monofilament fibers were obtained using conventional melting spun methods. The copolymers were identified by ¹H and ¹³C NMR spectroscopy and gel permeation chromatography (GPC). The physicochemical properties, such as viscosity, molecular weight, melting point, glass transition temperature, and crystallinity, were studied. The hydrolytic degradation of copolymers was studied in a phosphate buffer solution, pH = 7.2, 37 °C, and a biological absorbable test was performed in rats. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2790–2799, 2005     

Synthesis and properties of biomimetic poly(L‐glutamate)‐b‐poly(2‐acryloyloxyethyllactoside)‐b‐poly(L‐glutamate) triblock copolymers

A novel class of biomimetic glycopolymer–polypeptide triblock copolymers [poly(L ‐glutamate)–poly(2‐acryloyloxyethyllactoside)–poly(L ‐glutamate)] was synthesized by the sequential atom transfer radical polymerization of a protected lactose‐based glycomonomer and the ring‐opening polymerization of β‐benzyl‐L ‐glutamate N‐carboxyanhydride. Gel permeation chromatography and nuclear magnetic resonance analyses demonstrated that triblock copolymers with defined architectures, controlled molecular weights, and low polydispersities were successfully obtained. Fourier transform infrared spectroscopy of the triblock copolymers revealed that the α‐helix/β‐sheet ratio increased with the poly(benzyl‐L ‐glutamate) block length. Furthermore, the water‐soluble triblock copolymers self‐assembled into lactose‐installed polymeric aggregates; this was investigated with the hydrophobic dye solubilization method and ultraviolet–visible analysis. Notably, this kind of aggregate may be useful as an artificial polyvalent ligand in the investigation of carbohydrate–protein recognition and for the design of site‐specific drug‐delivery systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5754–5765, 2004     

s‐Triazine‐based hyperbranched polyethers: Synthesis,characterization, and properties

A series of s‐triazine‐based hyperbranched polyethers (HBPE) have been synthesized to obtain thermostability but flexible polymers by an interfacial polycondensation of different diols as A₂ and cyanuric chloride as B₃ monomers using A₂ + B₃ approach in the presence of a phase transfer catalyst. The polymerization reaction parameters are optimized, and the results indicate that the optimum conditions for the interfacial polycondensation are a 2:3 mole ratio of cyanuric chloride to diol using butanediol, benzyldimethylhexadecyl ammonium chloride as the catalyst, dichloromethane as the organic solvent, and a three‐step procedure with keeping the reaction mixture at different low temperatures for 2h/2h/5h. Other techniques such as high‐temperature solution, one‐step polycondensation, and transesterification were also carried out to synthesize the HBPE but proved to be not suitable due to large number of side reactions. The synthesized polymers were characterized by FTIR, ¹H NMR, and ¹³C NMR spectroscopy, hydroxyl number determination, solution viscosity measurements, and GPC analysis. The thermal behavior of the hyperbranched polymer was investigated by thermogravimetric analysis and differential scanning calorimetry. All the results were compared with those from an analogous linear polyether, obtained from 2‐methoxy‐4,6‐dichloro‐s‐triazine and butanediol by using the same polymerization technique. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3994–4004, 2010     

Water‐soluble polymers from acid‐functionalized norbornenes

Unprotected exo,exo‐5‐norbornene‐2,3‐dicarboxylic acid and exo,exo‐7‐oxa‐5‐norbornene‐2,3‐dicarboxylic acid were polymerized via ring‐opening metathesis polymerization. This reaction yielded polymers with molecular weights (M_n from GPC) ranging from 31 to 242 kg/mol and polydispersity indices between 1.05 and 1.12, using Grubbs' third generation catalyst. The water solubility as a function of pH value of the polymers was investigated by dynamic light scattering (DLS). DLS and acid‐base titration revealed that the oxanorbornene polymer was water soluble over a wider pH range than its norbornene analog. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1266–1273, 2009     

The synthesis of poly[6,8‐dioxabicyclo[3.2.1]octane‐b‐(ethylene glycol)‐b‐6,8‐dioxabicyclo[3.2.1]octane] by controlled cationic ring‐opening polymerization

The triblock copolymer poly[6,8‐dioxabicyclo[3.2.1]octane‐b‐(ethylene glycol)‐b‐6,8‐dioxabicyclo[3.2.1]octane] was prepared by the controlled cationic ring‐opening polymerization of 6,8‐dioxabicyclo[3.2.1]octane (6,8‐DBO) from a macroinitiator. The macroinitiator, poly(ethylene glycol) (PEG) di(1‐chloroethyl ether), was prepared via the addition of HCl to PEG divinyl ether and was characterized with ¹³C NMR, ¹H NMR, and gel permeation chromatography (GPC). Upon preparation, a small fraction of the chain ends underwent a cyclization reaction to form inactive chain ends. When the macroinitiator was used in polymerizations of 6,8‐DBO with ZnI₂ as an activator, linear kinetic plots were observed, a linear increase in the copolymer molecular weight with conversion was seen, and the molecular weight distributions of the copolymer samples remained constant at about 1.40. Confirmation of the triblock structure of the final product was obtained with ¹H NMR spectra, ¹³C DEPT spectra, and GPC chromatograms. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4081–4087, 2000     

Real‐time monitoring of the ring‐opening polymerization of rac‐lactide with in situ attenuated total reflectance/Fourier transform infrared spectroscopy with conduit and diamond‐composite sensor technology

Polymerization rates were proportional to initial Sn(Oct)₂ concentration at low [Sn(Oct)₂]₀/[PrOH]₀ values, but began to level off at higher values. When [Sn(Oct)₂]₀/[PrOH]₀ was significantly greater than unity, the opposite behavior occurred. Tin(II) alkoxide concentration became limited by the initial PrOH concentration and independent of initial Sn(Oct)₂ concentration. Addition of 2‐ethylhexanoic acid caused polymerization rate retardation, without affecting molecular weight. A control polymerization was conducted in the absence of PrOH. The molecular weight of the resulting polymer was consistent with the measured water content (3.7 wt % by Karl Fisher titration) of the as‐received Sn(Oct)₂. The polymerization rate in the absence of PrOH was slow, and this suggested that water is less efficient than an alcohol in creating polymerization‐active stannyl ether bonds. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6238–6247, 2004     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

Synthesis of perfectly bifunctional polyacrylates by single‐electron‐transfer living radical polymerization

Poly(methyl acrylate)s, poly(ethyl acrylate)s, and poly(butyl acrylate)s with α,ω‐di(bromo) chain ends and M_n from 8500 to 35,000 were synthesized by single‐electron‐transfer living radical polymerization (SET‐LRP). The analysis of their chain ends by a combination of ¹H and 2D‐NMR, GPC, MALDI‐TOF MS, chain end functionalization, chain extension, and halogen exchange experiments demonstrated the synthesis of perfectly bifunctional polyacrylates by SET‐LRP. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4684–4695, 2007     

Reversible addition–fragmentation transfer polymerization of p‐nitrophenyl acrylate and synthesis of diblock copolymers poly(p‐nitrophenyl acrylate)‐b‐polystyrene

Poly(p‐nitrophenyl acrylate)s (PNPAs) with different molecular mass and narrow polydispersity were successfully synthesized for the first time by reversible addition–fragmentation transfer (RAFT) polymerization with azobisisobutyronitrile (AIBN) as an initiator and [1‐(ethoxy carbonyl) prop‐1‐yl dithiobenzoate] as the chain‐transfer agent. Although the molecular mass of PNPAs can be controlled by the molar ratio of NPA to RAFT agent and the conversion, a trace of homo‐PNPA was found, especially at the early stage of polymerization. The dithiobenzoyl‐terminated PNPA obtained was used as a macro chain‐transfer agent in the successive RAFT block copolymerization of styrene (St) with AIBN as the initiator. After purification by two washings with cyclohexane and nitromethane to remove homo‐PSt and homo‐PNPA, the pure diblock copolymers, PNPA‐b‐PSt's, with narrow molecular weight distribution were obtained. The structural analysis of polymerization products by ¹H NMR and GPC verified the formation of diblock copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4862–4872, 2004     

One‐pot synthesis of polyamide 12,T–polyamide‐6 block copolymers

Polyamide 12,T–polyamide‐6 (PA‐12,T–PA‐6) block copolymers were synthesized by anionic polymerization of caprolactam using a PA‐12,T macrocoinitiator (McI). PA‐12,T McI and its precursors are soluble in molten caprolactam allowing for both the McI step‐growth polymerization and anionic polymerization to be performed in one‐pot. It was found that the competing reaction rates of caprolactam ring‐opening polymerization and McI transamidation are both deterred by a common ion effect using CaCl₂ and soluble materials were obtained using >1 mol % CaCl₂. Without CaCl₂, the reaction mixture solidifies in less than 30 s and produces crosslinked materials. To understand this effect, PA‐12,T McI reactions with caprolactam were performed with 1–10 mol % CaCl₂, and polymer structures were characterized using ¹³C NMR and dilute solution viscometry. These data were then correlated with unique thermal properties and swelling behavior of the block copolymers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

High‐quality poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] synthesized by a solid–liquid two‐phase reaction: Characterizations and electroluminescence properties

Poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] (MEH‐PPV) with a molar mass of 26–47 × 10⁴ g mol^?1 and a polydispersity of 2.5–3.2 was synthesized by a liquid–solid two‐phase reaction. The liquid phase was tetrahydrofuran (THF) containing 1,4‐bis(chloromethyl)‐2‐methoxy‐5‐(2′‐ethylhexyloxy)benzene as the monomer and a certain amount of tetrabutylammonium bromide as a phase‐transfer catalyst. The solid phase consisted of potassium hydroxide particles with diameters smaller than 0.5 mm. The reaction was carried out at a low temperature of 0 °C and under nitrogen protection. No gelation was observed during the polymerization process, and the polymer was soluble in the usual organic solvents, such as chloroform, toluene, THF, and xylene. A polymer light‐emitting diode was fabricated with MEH‐PPV as an active luminescent layer. The device had an indium tin oxide/poly(3,4‐ethylenedioxylthiophene) (PEDOT)/MEH‐PPV/Ba/Al configuration. It showed a turn‐on voltage of 3.3 V, a luminescence intensity at 6.1 V of 550 cd/m², a luminescence efficiency of 0.43 cd/A, and a quantum efficiency of 0.57%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3049–3054, 2004     

Synthesis of water‐soluble cationic polymers with star‐like structure based on cyclodextrin core via ATRP

A range of novel cationic star‐like polymers (Star‐P(MeDMA)s) were synthesized through atom transfer radical polymerization (ATRP) by core‐first method, using a β‐cyclodextrin initiator with 21 initiation sites (21Br‐β‐CD). Methyl chloride‐quaternized 2‐(dimethylamino)ethyl methacrylate (MeDMA) was polymerized in an aqueous medium using 21Br‐β‐CD, Cu(I)Br, and 2,2′‐dipyridyl as an initiator, catalyst, and ligand, respectively. The effects of polymerization temperature and monomer/initiator ratios on the degree and kinetics of polymerization were investigated. The molecular weights, hydrodynamic sizes, and charge densities of the quaternized polymers were characterized using gel permeation chromatography (GPC), dynamic light scattering (DLS), and colloidal titration, respectively. The results demonstrated that the moderate aqueous solubility of the 21Br‐β‐CD initiator had significant impact on the physicochemical properties of the obtained star polymers. The polymerization of 500/1/2/5 ([M]₀/[I]₀/[Cu(I)₀/[L]₀]) at 90 °C for 6 h was found to be the best condition to synthesize the proposed cationic star polymer with well‐defined structures in aqueous medium. The nonlinear relationship between the apparent charge density and the particle size of the cationic star polymers was further revealed by GPC and DLS measurements. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6345–6354, 2005     

Synthesis of a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines,SG1‐CH(Me)CO2R,and measurement of the homolysis rate constants of the C?ON bond

During nitroxide‐mediated polymerization, the polymerization time decreases with an increasing rate constant of the cleavage of the NO? C bond of dormant alkoxyamines. Thus, knowledge of the factors influencing this cleavage is of considerable interest. We have prepared a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines [SG1‐CH(Me)CO₂R] with various R groups (alkyl or aryl) and measured the homolysis rate constants (k_d). k_d decreases with the bulkiness and increases with the polarity of the R group. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3504–3515, 2004