Diffraction grating in noncrosslinked polymers

The diffraction efficiency and morphology of the transmission modes of holographic polymer dispersed liquid crystals were studied with respect to the molecular structure of poly(urethane acrylate) (PUA), the film (polymer/liquid crystal) and resin (oligomer/monomer) compositions, and the cell thickness. PUA, based on N‐vinylpyrrolidone and ethyl hexyl acrylate, with low‐molecular‐weight poly(propylene glycol) at a low oligomer content, showed high diffraction efficiency. The results were interpreted in terms of the monomer reactivity and polymer elasticity. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 613–620, 2004     

Anomalous rheology in a nanostructured diblock copolymer/hydrocarbon system and its kinetic origin

Nanostructured squalane solutions (5–20 wt %) of a diblock copolymer, poly(styrene‐b‐hydrogenated isoprene), were prepared by a cosolvent‐casting method. The as‐cast solutions behaved as viscous liquids with terminal flow behavior at room temperature. Upon heating, the solutions gelled, and they did not return to their starting liquidlike state upon cooling. Small‐angle X‐ray scattering (SAXS) revealed a random array of spherical micelles in the as‐cast solutions, which were hypothesized to be in a nonequilibrium state. This abnormal solidification with increasing temperature was correlated with the formation of body‐centered‐cubic (BCC) structures. Isothermal SAXS and rheology measurements also indicated that the rate of formation of BCC structures in the as‐cast solutions increased with temperature. A diffusion‐controlled nucleation‐and‐growth mechanism was proposed for the ordering process in the as‐cast polystyrene‐b‐hydrogenated polyisoprene/squalane solutions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1496–1505, 2004     

Latent solid‐phase extraction with thermoresponsive soluble polymers

The use of soluble thermoresponsive polymers to sequester or scavenge hydrophobic guest molecules from dilute aqueous solutions on heating is described. In these studies, a homopolymer of N‐isopropylacrylamide was shown to sequester 46–83% of a soluble monochlorotriazine from 0.1–10 ppm aqueous solutions when heating above this polymer's lower critical solution temperature (LCST). Substitution of the reactive piperidine‐containing 20:1 copolymer poly(N‐isopropylacrylamide)‐c‐poly[N‐4‐(acrylamidomethyl)piperidine] for this unreactive polymer led to >98% scavenging of these same triazines when heating above this reactive polymer's LCST. The monochlorotriazine guests studied included the herbicide atrazine and two dye‐labeled analogues of this herbicide. In one case, an atrazine analogue was designed so as to contain a dansyl group for fluorescence analysis. In the second case, an atrazine analogue was labeled with a methyl red group to facilitate visual and spectrophotometric analysis. Atrazine concentrations were measured with liquid chromatography–mass spectrometry. The enhanced efficiency of the reactive piperidine‐containing copolymer scavenger in removing triazines from solution is attributed to covalent bond formation by nucleophilic aromatic substitution of the chlorine of the monochlorotriazines by the piperidine nucleophile on the copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6309–6317, 2004     

Stereocontrolled anionic alternating copolymerization of ethylphenylketene with benzaldehyde by a bisoxazoline ligand

Anionic copolymerization of ethylphenylketene with benzaldehyde with butyllithium or diethylzinc as the initiator proceeded in a perfect 1:1 alternating manner to produce the corresponding polyester, whose repeating unit had two adjacent chiral centers. The relative stereochemistry between these two chiral centers was successfully controlled by the addition of (S,S)‐(‐)‐2,2′‐isopropylidenebis(4‐tert‐butyl‐2‐oxazoline), producing the corresponding polyester that had excellent diastereoselectivity (erythro‐configuration : threo‐configuration = 4:96). The diastereomeric ratio was determined by high‐performance liquid chromatography analysis of the diol, which was obtained by reductive degradation of the polyester while maintaining the configuration of the repeating unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5384–5388, 2004     

New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Reaction kinetics and gel effect on the polymerization of 2‐ethoxyethyl methacrylate and 2(2‐ethoxyethoxy) ethyl methacrylate

Polymerization kinetics at several temperatures of 2‐ethoxyethyl methacrylate (EEMA) and 2(2‐ethoxyethoxy) ethyl methacrylate (DEMA) in bulk and in dioxane solutions are described. The gel effect was never detected at monomer concentrations equal to or lower than 1 mol L^?1, although in the bulk polymerization both monomers display the gel effect at very low conversions. Because of the influence of the efficiency factor f on the polymerization rate, a theoretical kinetic interpretation of the changes in f with monomer and initiator concentrations and kinetic parameters was performed to achieve a better understanding of the mechanisms involved in radical polymerization. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3987–4001, 2002     

Atom transfer radical polymerization of cyclohexyl methacrylate at a low temperature

The atom transfer radical polymerization of cyclohexyl methacrylate (CHMA) is reported. Controlled polymerizations were performed with the CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine catalytic system with ethyl 2‐bromoisobutyrate as the initiator in bulk and different solvents (25 vol %) at 40 °C. The polymerization of CHMA in bulk resulted in a controlled polymerization, although the concentration of active species was relatively elevated. The addition of a solvent was necessary to reduce the polymerization rate, which was dependent on the dipole moment. Well‐controlled polymers were obtained in toluene, diphenyl ether, and benzonitrile solutions. Poly(cyclohexyl methacrylate) as a macroinitiator was used to synthesize the poly(cyclohexyl methacrylate)‐b‐poly(tert‐butyl methacrylate) block copolymer, which allowed a demonstration of its living character. In addition, two difunctional initiators, 1,4‐bis(bromoisobutyryloxy) benzene and 1,2‐bis(bromoisobutyryloxy) ethane, were used to initiate the atom transfer radical polymerization of CHMA. The experimental molecular weights of the obtained polymers were very close to the theoretical ones. These, along with the relative narrow molecular weight distributions, indicated that the polymerization was living and controlled. For confirmation, two different poly(tert‐butyl methacrylate)‐b‐poly(cyclohexyl methacrylate)‐b‐poly(tert‐butyl methacrylate) triblock copolymers were also synthesized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 71–77, 2005     

Temperature‐responsive linear polyelectrolytes and hydrogels based on [2‐(methacryloyloxy)ethyl] trimethylammonium chloride and N‐isopropylacrylamide and their complex formation with potassium hexacyanoferrates (II,III)

Water‐soluble temperature‐responsive polyelectrolytes and hydrogels have been synthesized by γ‐radiation copolymerization of [2‐(methacryloyloxy)‐ethyl]trimethylammonium chloride with N‐isopropylacrylamide. Complex formation of soluble copolymers with potassium hexacyanoferrates (II, III) was studied in aqueous solutions. It was shown that, depending on the concentration and temperature, the formation of soluble or insoluble polycomplexes is observed. The hydrogels show good ability to absorb potassium hexacyanoferrates (II, III) from aqueous solutions. Sorption ability of hydrogels depends on the content of cationic monomer in copolymer and the nature of coordination ion. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 515–522, 2004     

Influence of matrix glass transition temperature on the memory effect of polymer‐dispersed liquid crystals

In this article, macroinitiators with different glass transition temperature (T_g) were synthesized by reversible additional‐fragmental chain transfer polymerization, and used to prepare polymer‐dispersed liquid crystals (PDLCs) with methyl acrylate. The memory effect of these PDLCs was investigated. The results showed that remarkable memory effect exhibit only in PDLCs with high and low T_g block chain. The possible mechanism responsible for the behavior is sketched. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 729–732, 2010     

High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Oligomeric calix[4]arene‐thiacrown ether for toxic heavy metals

A new oligomeric calix[4]arene‐thiacrown‐4 ( 5 ) was synthesized via a condensation reaction of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐bis‐(4‐aminobenzyloxy)‐calix[4]arene‐thiacrown‐4 ( 4 ) with adipoyl dichloride. In this oligomerization reaction only five/six calix[4]arene‐thiacrown‐4 units were linked in the oligomeric chain. The complexation studies of 5 were made with liquid–liquid‐ extraction and solid–liquid‐sorption procedures. For comparison, the extraction efficiencies of monomers 1 , 3 , and 4 to selected transition metals are reported. The selectivity of monomers 3 and 4 toward Cu²⁺, Hg²⁺, and Pb²⁺ was lost after oligomerization in the two‐phase extraction systems. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 186–193, 2004     

Temperature‐sensitive hydrogel microspheres formed by liquid–liquid phase transitions of aqueous solutions of poly(N,N‐dimethylacrylamide‐co‐allyl methacrylate)

Poly(N,N‐dimethylacrylamide‐co‐allyl methacrylate) (DMA‐co‐AMA) copolymers were prepared by the copolymerization of N,N‐dimethylacrylamide with allyl methacrylate (AMA). The methacryloyl group of AMA reacted preferentially, and this resulted in pendant allyl groups along the copolymer chains. Aqueous solutions of these DMA‐co‐AMA copolymers were thermoresponsive and showed liquid–liquid phase transitions at temperatures that depended on the AMA content. Hydrogel microspheres were prepared from these thermally phase‐separated liquid microdroplets by the free‐radical crosslinking of the pendant allyl groups. The morphologies of the resulting thermoresponsive microspheres as a function of the reaction temperature and the amount of the initiator were examined. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1641–1648, 2005     

Solvent effect on the free‐radical copolymerization of 2‐hydroxyethyl methacrylate with t‐butyl acrylate

The free‐radical copolymerization of 2‐hydroxyethyl methacrylate with t‐butyl acrylate was carried out at 50 °C in bulk and in 3 mol · L^?1 1,4‐dioxane and N,N′‐dimethylformamide solutions. Differences between the apparent reactivity ratios determined in this work indicated a noticeable solvent effect. This is explained with a qualitative bootstrap effect. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2043–2048, 2001     

Electric‐field‐induced molecular alignment of side‐chain liquid‐crystalline polyacetylenes containing biphenyl mesogens

Electric‐field‐induced molecular alignments of side‐chain liquid‐crystalline polyacetylenes [? {HC?C[(CH₂)_mOCO‐biph‐OC₇H₁₅]}? , where biph is 4,4′‐biphenylyl and m is 3 (PA3EO7) or 9 (PA9EO7)] were studied with X‐ray diffraction and polarized optical microscopy. An orientation as high as 0.84 was obtained for PA9EO7. Furthermore, the molecular orientation of PA9EO7 was achieved within a temperature range between the isotropic‐to‐smectic A transition temperature and 115 °C, and this suggested that the orientational packing was affected by the thermal fluctuation of the isotropic liquid and the mobility of the mesogenic moieties. The maximum achievable orientation for PA9EO7 was much greater than that for PA3EO7. This was the first time that the electric‐field‐induced molecular orientation of a side‐chain liquid‐crystalline polymer with a stiff backbone was studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1333–1341, 2004     

Thermotropic liquid‐crystalline polyesters containing biphenyl mesogens in the main chain: The effect of connectivity

A homologous series of main‐chain thermotropic liquid‐crystalline polyesters containing rigid biphenyl mesogen and flexible methylene spacers were synthesized with the AB‐type self‐polycondensation approach. The polyesters were characterized with ¹H NMR, gel permeation chromatography, thermogravimetric analysis, differential scanning calorimetry, polarized light optical microscopy, and X‐ray diffraction. These polyesters, containing trimethylene spacers on the acid side and various spacers on the alcohol side of the biphenyl mesogen, showed an odd–even effect in the transition temperatures and mesophase type. The even members showed higher transition temperatures than the odd ones. A normal smectic mesophase was observed for the even members, whereas the odd‐membered counterparts exhibited a tilted smectic mesophase. To study the effect of connectivity, the mesophase characteristics of these polyesters were compared with those of the isomeric AB‐type polyesters without any methylene spacer on the acid side of the biphenyl moiety. The mesophase characteristics were insensitive to whether the mesogen was connected to a carboxyl unit or a methylene unit. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2734–2746, 2004     

Synthesis and properties of novel sulfonated polyimides from 2,2′‐bis(4‐aminophenoxy)biphenyl‐5,5′‐disulfonic acid

Novel sulfonated polyimides (SPIs) were prepared from 1,4,5,8‐naphthalenetetracarboxylic dianhydride (NTDA), 2,2′‐bis(4‐aminophenoxy)biphenyl‐5,5′‐disulfonic acid (oBAPBDS) with nonlinear configuration, and common nonsulfonated diamines. Water uptake (WU) in liquid and vapor, water stability, and proton conductivity σ of the resulting SPI membranes were investigated. They were soluble in m‐cresol and dimethylsulfoxide, and their WUs in liquid were much larger than those of the SPIs from other sulfonated diamines with linear configuration such as 4,4′‐bis(4‐aminophenoxy)biphenyl‐3,3′‐disulfonic acid (BAPBDS). NTDA‐oBAPBDS membrane was soluble in water at room temperature, whereas all the oBAPBDS‐based copolyimide membranes were insoluble in water and maintained mechanical strength after being soaked in distilled water at 80 °C for 40–1000 h. This much improved water stability was due to the enhanced solubility stability of membrane toward water. The water vapor sorption isotherms were rather similar between the SPIs with the nonlinear and linear configurations of sulfonated diamine moieties. The present SPIs with IECs of 1.8–2.6 meq/g, including NTDA‐BAPBDS, showed reasonably high proton conductivities under the highly humid conditions and roughly fell on the same σ–WU relation line. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1432–1440, 2004     

Synthesis of novel polypyromellitimides with n‐alkyloxy side chains and their liquid‐crystal aligning property

New well‐defined brush polypyromellitimides with n‐octyloxy and n‐dodecyloxy side chains were prepared by two‐step polycondensations of 3,6‐di(n‐alkyloxy)pyromellitic dianhydrides with various conventional aromatic diamines. Their structures and properties were investigated and compared with those of polyimides without the side chains. The alkyloxylated poly(amic acid)s had inherent viscosities of 0.45–1.09 dL/g. The polyimides showed enhanced solubility in organic solvents and had layered structures in the solid state. As the side‐chain length increased from n‐octyloxy to n‐dodecyloxy, the extent of layered structure formation increased, whereas the glass‐transition temperature and thermal resistance decreased. As for the liquid‐crystal (LC) aligning ability measured with 4‐n‐pentyl‐4′‐cyanobiphenyl on rubbed thin‐film surfaces, all the side‐chain polyimides revealed homogeneous LC alignment parallel to the rubbing direction with distinctively higher pretilt angles than those of the polyimides without the side chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3130–3142, 2004     

Controlled polymerizations of 2‐(dialkylamino)ethyl methacrylates and their block copolymers in protic solvents at ambient temperature via ATRP

Very well‐controlled polymerizations of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and 2‐(diethylamino)ethyl methacrylate (DEAEMA) in aqueous and methanolic solutions via atom transfer radical polymerization (ATRP) at ambient temperature were demonstrated. Poly(DMAEMA) and poly(DEAEMA) of low polydispersity index (PDI) of ～1.07 were obtained using the p‐toluenesulfonyl chloride/CuCl/1,1,4,7,10,10‐hexamethyl‐triethylenetetramine (p‐TsCl/CuCl/HMTETA) system. Excellent control of polymerization was achieved even in pure methanol. This is in contrast with the very poor control of DMAEMA ATRP in methanol reported previously using a different intiator/catalyst/ligand system. The initiator p‐TsCl underwent hydrolysis reaction in aqueous methanolic solutions with a second‐order rate constant of 6.1 × 10^?4 dm³ mol^?1 s^?1 at 25 °C. Both poly(DMAEMA) and poly(DEAEMA) retained almost full chlorine‐functionization at the chain ends. Well‐defined block copolymers of DEAEMA and DMAEMA were successfully obtained by starting with either macroinitiators of DEAEMA or DMAEMA. Other well‐defined diblock copolymers could be prepared using these macroinitiators. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5161–5169, 2004     

Physically controlled,free‐radical polymerization of vaporized fluoromonomer on solid surfaces

Gas/vapor‐deposition polymerization (GDP) of vinyl monomer is expected to exhibit a unique polymerization behavior different from its polymerization in the liquid phase. Free‐radical GDP of 2,2,3,3,3‐pentafluoropropyl methacrylate (FMA) was carried out with a conventional free‐radical initiator (azobisisobutyronitrile) on substrate surfaces. A linear relationship between the number‐average molecular weight and polymer yield was observed, and the consecutive copolymerization of methyl methacrylate (MMA) and FMA led to the formation of block copolymer P(MMA‐block‐FMA). These results suggested that the GDP process on substrate surfaces has a living nature. During the process, the active species at growing chain ends may be immobilized on the deposit surface and restricted from the chain‐transfer reactions, resulting in a continuation of the propagation reaction. The GDP on substrate surfaces is therefore a physically controlled polymerization process. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2621–2630, 2004     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004