Facile one‐shot synthesis of functional star‐shaped polymers by domino‐type living cationic copolymerization

This article describes the syntheses of various functional star‐shaped polymers via monomer‐selective living cationic polymerization of a vinyl ether (VE) and a divinyl compound with alkoxystyrene moieties by a one‐shot method. An aqueous solution of the resulting star‐shaped polymers with oxyethylene pendants exhibits thermally induced phase separation behavior. To achieve domino synthesis from various monomers, we investigated the optimum reactivity difference using a functional VE and a monofunctional alkoxystyrene. Moreover, the one‐shot copolymerization of a bifunctional VE and an alkoxystyrene is also conducted to yield a star‐shaped polymer via the core‐first method. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2166–2174     

Soluble poly(amide–imide)s prepared by one‐pot solution condensation

A new one‐pot procedure for imide–acid monomer synthesis and polymerization is reported for four new poly(amide–imide)s. Bisphenol A dianhydride (BPADA) was reacted with twice the molar amount of 3‐aminobenzoic acid (3ABA) or 3‐amino‐4‐methylbenzoic acid (3A4MBA) in 1‐methyl‐2‐pyrrolidinone (NMP) and toluene mixture, and the amic acid intermediates cyclized in solution to give two diimide‐containing dicarboxylic acid monomers. Without isolation, the diacid monomers were then polymerized with either 1,3‐diaminomesitylene (DAM) or 1,5‐diaminonaphthalene (1,5NAPda) using triphenyl phosphite‐activation to give a series of four soluble poly(amide–imide)s, PAI. Isolation and purification of the dicarboxylic acid monomers was not necessary for formation of high molecular weight polymers as indicated by intrinsic viscosities of 0.64–1.04 dL/g determined in N,N‐dimethylacetamide (DMAc). All of the PAI were soluble in polar aprotic solvents such as NMP, DMAc, and dimethyl sulfoxide (DMSO). Glass transition temperatures ranged from 243 to 279°C by DSC, and 5% weight loss temperatures were above 400°C in both air and nitrogen. Flexible films cast from DMAc were light yellow, transparent, and tough. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1183–1188, 1999     

Side‐chain ferrocene‐containing (meth)acrylate polymers: Synthesis and properties

A comprehensive investigation on the synthesis and properties of a series of ferrocene‐containing (meth)acrylate monomers and their polymers that differ in the linkers between the ferrocene unit and the backbone was carried out. The side‐chain ferrocene‐containing polymers were prepared via atom transfer radical polymerization. The kinetic studies indicated that polymerization of most monomers followed a “controlled”/living manner. The polymerization rates were affected by the vinyl monomer structures and decreased with an increase of the linker length. Methacrylate polymerization was much faster than acrylate polymerization. The optical absorption of monomers and polymers was affected by the linkers. Thermal properties of these polymers can be tuned by controlling the length of the linker between the ferrocene unit and the backbone. By increasing the length of the linker, the glass transition temperature ranged from over 100 to ?20 °C. Electrochemical properties of both monomers and polymers were characterized. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Preparation of calixarene‐containing polymer with proton transport ability

To prepare calixarene‐based polymers with proton transport ability, the calix[4]arene derivatives with one polymerizable group at the upper rim were first prepared via selective nitration, amination, and acrylamidation of calix[4]arene. Two methods, solution polymerization and emulsion polymerization, were then employed to carry out the copolymerization of these derivatives with other monomers such as styrene, vinyl acetate, or methyl methacrylate. Transport experiments show that the resulting calixarene‐based polymers have a very good ability to transport protons. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6259–6266, 2004     

Synthesis and characterization of aromatic cyclolinear phosphazene polyetherketones containing bis‐Spiro‐substituted cyclotriphosphazene unit

A novel monomer, 2,2‐bis‐(4′‐fluorobenzoylphenoxy)‐4,4,6,6‐bis[spiro‐(2′,2″‐dioxy‐1′, 1′‐biphenylyl)] cyclotriphosphazene, was synthesized and polymerized with 4,4′‐difluorobenzophenone as a comonomer and 4,4′‐isopropylidenediphenol or 4,4′‐(hexafluoroisopropylidene) diphenol in N,N‐dimethylacetamide at 162 °C for 4 h to give two series of aromatic cyclolinear phosphazene polyetherketones containing bis‐spiro‐substituted cyclotriphosphazene groups. The structure of the monomer was confirmed by ¹H, ¹³C, and ³¹P NMR. The effect of the incorporation of the bis‐spiro‐substituted cyclotriphosphazene group on the thermal properties of these polymers was investigated by DSC and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2993–2997, 2001     

Thiol‐ene photopolymerization of polymer‐derived ceramic precursors

The liquid, ceramic precursor monomer VL20 was copolymerized with a thiol monomer in a traditional radical thiol‐ene photopolymerization. Polymerization occurred via addition of the thiol functional group to the vinyl silazane functional group in a 1:1 ratio consistent with a step‐growth polymerization. Gelation occurred at a high conversion of functional groups (70%) consistent with an average molecular weight and functionality of 560 and 1.7, respectively, for VL20 monomers. Initiatorless photopolymerization of the thiol‐VL20 system also occurred upon irradiation at either 365 or 254 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1752–1757, 2004     

Electrochemical and optical studies of furan and thieno[3,2‐b]thiophene end capped benzotriazole derivatives

Two new 2‐dodecyl benzotriazole (BTz) based donor‐acceptor‐donor (DAD) type polymers were synthesized and characterized in terms of their electrochemical and spectral properties. These DAD type polymers were synthesized electrochemically from furan or thieno[3,2‐b]thiophene (TT) end‐capped BTz monomers. Furan based and thieno[3,2‐b]thiophene based monomers showed monomer oxidations at 1.15 and 1.25 V, respectively, which eased the formation of conducting polymer films without overoxidation. Cyclic voltammetry and spectroelectrochemistry studies showed that both materials are multicolored electrochromic polymers. Results and comparison with properties of other BTz based DAD type polymers are highlighted in detail. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The synthesis and properties of side‐chain liquid‐crystal polymers with a chiral center

The synthesis and mesomorphic properties of six monomers and six side‐chain liquid‐crystal polymers with a chiral center are described. The polysiloxanes were prepared by the hydrosilation of monomers with poly(hydromethylsiloxane)s. Most of the polymers exhibit a wide range of the chiral smectic C phase (SmC*). © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1609–1617, 2000     

Parallel kinetic investigation of 2‐oxazoline polymerizations with different initiators as basis for designed copolymer synthesis

The systematical kinetic investigations of four 2‐substituted‐2‐oxazoline monomers with four initiators at two temperatures and four monomer/initiator ratios are described. To cover this broad range of variables (128 different combinations), an automated synthesizer was used to accelerate the investigations and to provide highly comparable results. With both gas chromatography and gel permeation chromatography, the livingness and the polymerization rates were determined for the different polymerizations. The resulting insights in the kinetics were used for the directed synthesis of truly random copolymers and copolymers with composition drift. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1830–1840, 2004     

Aliphatic–aromatic copolyesters derived from 2,2,4,4‐tetramethyl‐1,3‐cyclobutanediol

With the massive changes taking place in the world today, the development of new thermally and mechanically stable polymeric materials is of utmost importance. This article focuses on the synthesis and thermal characterization of a new series of copolyesters that incorporate both aromatic as well as aliphatic diols. This is of interest because most polymer materials that exhibit high thermal and/or mechanical properties contain aromatic monomer units only. These aromatic units usually contribute to either the thermal or mechanical properties but typically not both. An example of this is bisphenol A polycarbonate, which has high mechanical properties but only moderate thermal properties when compared, for example, to polyimides. In recent years there has been an interest in copolyesters that contain 2,2,4,4‐tetramethyl‐1,3‐cyclobutanediol (CBDO). This aliphatic monomer imparts some very unique thermal as well as mechanical properties. This article will report the thermal properties of a new series of CBDO‐based copolyesters. These polymers include CBDO, a series of bisphenols, and terephthaloyl chloride. The series of bisphenols discussed here include bisphenol A, AF, F, and HPF. These polymers display glass transition temperatures near 200 °C and decomposition temperatures from 390–420 °C (Argon) and from 385–410 °C (Air). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3473–3478, 2004     

Gel forming waterborne dispersion polymerization of sodium p‐styrene sulfonate with glycidyl methacrylate

Water soluble monomer like sodium p‐styrene sulfonate (SSS) is copolymerized with hydrophobic and reactive monomer glycidyl methacrylate (GMA). The polymerization proceeds as dispersion and forms gels. The gel forming nature prevails even with other hydrophobic and hydrophilic monomers to form ternary polymeric systems. The swelling is dependent on polymer composition as well as the treatment history of polymers. SSS also induces ring opening of GMA to form 1,2‐diols as confirmed independently by various model reactions. The ability of hydrogels to absorb various dyes indicates that owing to the anionic nature, hydrogels absorb cationic dyes nearly quantitatively. Because of their strong affinity to cationic species these hydrogel forming polymers are potentially useful in water purification applications as well as purification of proteins. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 626–634     

Charge‐transfer piperazine‐containing polymeric systems via ring‐opening metathesis polymerization

This article describes the synthesis of piperazine‐containing homopolymer systems via ring‐opening metathesis polymerization (ROMP). These systems were subsequently used as electron donors in the formation of charge‐transfer (CT) complexes. Using exo‐N‐(6‐bromohexyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2,3‐dicarboxamide as a starting material, monomers were synthesized to act as electron donors. The amine group at the “open” end of the piperazine was either left open or alkylated with various alkyl groups. The monomers' ability to act as electron donors and their polymerization rates were studied. After initial photometric titration studies using 2,3‐dichloro‐5,6‐dicyanobenzoquinone (DDQ) as an electron acceptor proved that these monomers would act as electron donors, they were subsequently polymerized into homopolymers via ROMP. The experimental results showed that a methanol:chloroform mixed solvent system enhanced the rate of polymerization over a single solvent (chloroform) system. Studies also showed that the alkylated piperazine‐containing monomer had a faster rate of polymerization than the secondary piperazine monomer. These monomers were used to make piperazine‐containing homopolymers via ROMP and the resulting polymers, like the monomers, also functioned as electron donors. Potential functions of these polymers include electronics, solar cells, optical systems, and biological applications. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5034–5043, 2009     

Synthesis,characterization, thermal properties,and antimicrobial activity of 4‐chloro‐3‐methyl phenyl methacrylate/8‐quinolinyl methacrylate copolymers

4‐Chloro‐3‐methyl phenyl methacrylate (CMPM) and 8‐quinolinyl methacrylate (8‐QMA) were synthesized through the reaction of 4‐chloro‐3‐methyl phenol and 8‐hydroxy quinoline, respectively, with methacryloyl chloride. The homopolymers and copolymers were prepared by free‐radical polymerization with azobisisobutyronitrile as the initiator at 70 °C. Copolymers of CMPM and 8‐QMA of different compositions were prepared. The monomers were characterized with IR spectroscopy and ¹H NMR techniques. The copolymers were characterized with IR spectroscopy. UV spectroscopy was used to obtain the compositions of the copolymers. The monomer reactivity ratios were calculated with the Fineman–Ross method. The molecular weights and polydispersity values of the copolymers were determined with gel permeation chromatography. The thermal stability of the polymers was evaluated with thermogravimetric analysis under a nitrogen atmosphere. The homopolymers and copolymers were tested for their antimicrobial activity againstbacteria, fungi, and yeast. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 157–167, 2005     

Hydroxyl‐ and amine‐terminated hyperbranched polyurethanes using AB2‐type azide monomers: Synthesis,characterization, fluorescence,and charge‐transfer complexation studies

Novel AB₂‐type azide monomers such as 3,5‐bis(4‐methylolphenoxy)carbonyl azide (monomer 1) , 3,5‐bis(methylol)phenyl carbonyl azide (monomer 2) , 4‐(methylol phenoxy) isopthaloyl azide (monomer 3) , and 5‐(methylol) isopthaloyl azide (monomer 4) were synthesized. Melt and solution polymerization of these monomers yielded hydroxyl‐ and amine‐terminated hyperbranched polyurethanes with and without flexible ether groups. The structures of theses polymers were established using FT‐IR and NMR spectroscopy. The molecular weights (M_w) of the polymers were found to vary from 3.2 × 10³ to 5.5 × 10⁴ g/mol depending on the experimental conditions used. The thermal properties of the polymers were evaluated using TGA and DSC: the polymer obtained from monomer ( 1 ) exhibited lowest T_g and highest thermal stability and the polymer obtained from monomer ( 2 ) registered the highest T_g and lowest thermal stability. All the polymers displayed fluorescence maxima in the 425–525 nm range with relatively narrow peak widths indicating that they had pure and intense fluorescence. Also, the polymers formed charge transfer (CT) complexes with electron acceptor molecules such as 7,7,8,8‐tetracyano‐quino‐dimethane (TCNQ) and 1,1,2,2‐tetracyanoethane (TCNE) as evidenced by UV‐visible spectra. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3337–3351, 2009     

Antimicrobial activity on the copolymers of 2,4‐dichlorophenyl methacrylate with methyl methacrylate: Synthesis and characterization

Copolymers of monomers 2,4‐dichlorophenyl methacrylate (2,4‐DMA) and methyl methacrylate (MMA) were synthesized with different monomer feed ratios using toluene as a solvent and 2,2′‐azobisisobutyronitrile (AIBN) as an initiator at 70 °C. The copolymers were characterized by IR‐spectroscopy, and copolymer composition was determined with UV‐spectroscopy. The linearization method of Fineman–Ross was employed to obtain the monomer reactivity ratios. The molecular weights and polydispersity indexes were determined by gel permeation chromatography (GPC). Thermogravimetric analyses of polymers were carried out in nitrogen atmosphere. The homo‐ and copolymers were tested for their antimicrobial properties against selected microorganisms. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5227–5234, 2004     

SET‐LRP of acrylates in the presence of radical inhibitors

The Cu(0)/Me₆‐TREN‐catalyzed single‐electron transfer mediated living radical polymerization (SET‐LRP) of methyl acrylate in the presence of the classic 4‐methoxyphenol free radical inhibitor was investigated. Kinetic experiments, combined with ¹H NMR, and MALDI‐TOF MS analysis of the resulting polyacrylates demonstrated that SET‐LRP is a robust synthetic method that does not require the purification of the monomers to remove the radical inhibitor. It is anticipated that these results will contribute to the expansion of technological and fundamental applications of SET‐LRP since it allows the synthesis of polymers with a structural perfection that previously was not accessible by any other method, starting from unpurified monomers, solvents, initiators, and ligands. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3174–3181, 2008     

New liquid‐crystalline poly(ester amide)s: The role of nitro groups in the phase behavior

New hydrogen‐bonded liquid‐crystalline poly(ester amide)s (PEA)s were obtained from 1,4‐terephthaloyl[bis‐(3‐nitro‐N‐anthranilic acid)] (5) or 1,4‐terephthaloyl[bis‐(N‐anthranilic acid)] (6), with or without nitro groups, respectively, through the separate condensation of each with hydroquinone or dihydroxynaphthalene. The dicarboxylic monomers were synthesized from 2‐aminobenzoic acid. The phase behavior of the monomers and polymers were studied with differential scanning calorimetry, polarized light microscopy, and wide‐angle X‐ray diffraction methods. Monomer 5, containing nitro groups, exhibited a smectic liquid‐crystalline phase, whereas the texture of monomer 6 without nitro groups appeared to be nematic. The PEAs containing nitro groups exhibited polymorphism (smectic and nematic), whereas those without nitro groups exhibited only one phase transition (a nematic threaded texture). The changes occurring in the phase behavior of the polymers were explained by the introduction of nitro groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1289–1298, 2004     

Facile syntheses of 4‐vinyl‐1,2,3‐triazole monomers by click azide/acetylene coupling

Synthetic strategies for the preparation of a new family of vinyl monomers, 4‐vinyl‐1,2,3‐triazoles, have been developed. These monomers are noteworthy as they combine the stability and aromaticity of styrenics with the polarity of vinylpyridines and the structural versatility of acrylate/methacrylate derivatives. To enable the wide adoption of these unique monomers, new methodologies for their synthesis have been elaborated which rely on Cu‐catalyzed azide/acetylene cycloaddition reactions—“click chemistry”—as the key step, with the vinyl substituent being formed by either elimination or Wittig‐type reactions. In addition, one‐pot “click” reactions have been developed from alkyl halides, which allow for monomer synthesis without isolation of the intermediate organic azides. The high yield and facile nature of these procedures has allowed a library of new monomers including the parent compound, 1‐H‐4‐vinyl‐1,2,3‐triazole, to be prepared on large scales. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2897–2912, 2008     

Ring‐opening polymerization of ε‐caprolactone and L‐lactide from silica nanoparticles surface

Coating of silica nanoparticles by biocompatible and biodegradable polymers of ε‐caprolactone and L ‐lactide was performed in situ by ring‐opening polymerization of the cyclic monomers with aluminum, yttrium, and tin alkoxides as catalysts. Hydroxyl groups were introduced on the silica surface by grafting of a prehydrolyzed 3‐glycidoxypropyl trimethoxysilane to initiate a catalytic polymerization in the presence of metal alkoxides. In this manner, free polymer chains were formed to grafted ones, and the graft density was controlled by the nature of the metal and the alcohol‐to‐metal ratio. The grafting reaction was extensively characterized by spectroscopic techniques and quantified. Nanocomposites containing up to 96% of polymer were obtained by this technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1976–1984, 2004