An intimate polycarbonate/poly(methyl methacrylate)/poly(vinyl acetate) ternary blend via coalescence from their common inclusion compound with γ‐cyclodextrin

In this study, we successfully report an intimate ternary blend system of polycarbonate (PC)/poly(methyl methacrylate) (PMMA)/poly(vinyl acetate) (PVAc) obtained by the simultaneous coalescence of the three guest polymers from their common γ‐cyclodextrin (γ‐CD) inclusion compound (IC). The thermal transitions and the homogeneity of the coalesced ternary blend were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The observation of a single, common glass transition strongly suggests the presence of a homogeneous amorphous phase in the coalesced ternary polymer blend. This was further substantiated by solid‐state ¹³C NMR observation of the T_1ρ(¹H)s for each of the blend components. For comparison, ternary blends of PC/PMMA/PVAc were also prepared by traditional coprecipitation and solution casting methods. TGA data showed a thermal stability for the coalesced ternary blend that was improved over the coprecipitated blend, which was phase‐segregated. The presence of possible interactions between the three polymer components was investigated by infrared spectroscopy (FTIR). The analysis indicates that the ternary blend of these polymers achieved by coalescence from their common γ‐CD–IC results in a homogeneous polymer blend, possibly with improved properties, whereas coprecipitation and solution cast methods produced phase separated polymer blends. It was also found that control of the component polymer molar ratios plays a key role in the miscibility of their coalesced ternary blends. Coalescence of two or more normally immiscible polymers from their common CD–ICs appears to be a general method for obtaining well‐mixed, intimate blends. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4182–4194, 2004     

Partial miscibility in a nylon‐6/nylon‐66 blend coalesced from their common α‐cyclodextrin inclusion complex

We successfully formed a series of inclusion complexes (ICs) between an α‐cyclodextrin (α‐CD) host and two kinds of guest polymers, nylon‐6 and nylon‐66. An attempt to achieve an intimate blend between nylon‐6 and nylon‐66 through the formation and dissociation of their common α‐CD IC was made. The formation of all nylon ICs was verified with wide‐angle X‐ray diffraction, differential scanning calorimetry (DSC), and Fourier transform infrared (FTIR) and cross‐polarized/magic‐angle‐spinning ¹³C NMR spectroscopy. The experimental results demonstrated that α‐CD could only host single nylon polymer chains in the IC channels, either nylon‐6 or nylon‐66 in their own complexes, and presumably either nylon in neighboring channels of their common IC. The IC‐coalesced blend of nylon‐6 and nylon‐66 was obtained after the removal of the host cyclodextrin from their common IC with dimethyl sulfoxide. The spectroscopic results (FTIR and ¹³C NMR) illustrated that there was a degree of intimate miscibility existing in the IC‐coalesced blend, but not in the solution‐cast physical blend, although X‐ray diffraction patterns showed that the crystal structure of the IC‐coalesced blend was similar to that of the physical blend. DSC thermal profiles suggested that nylon‐66 first formed crystals during coalescence and that the subsequent crystallization of nylon‐6 was greatly affected by the nylon‐66 crystallites because of the close proximity of the two components in portions of the coalesced blend. DSC observations also demonstrated that the melting of the coalesced blend did not lead to complete phase separation of the nylon‐6 and nylon‐66 components. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1369–1378, 2004     

Organizational stabilities of bulk neat and well‐mixed,blended polymer samples coalesced from their crystalline inclusion compounds formed with cyclodextrins

Cyclodextrins (CDs) are cyclic starches containing α‐1,4‐linked glucose units. Commonly available α‐, β‐, and γ‐CDs have six, seven, and eight glucose units, respectively. They are well known for forming noncovalent inclusion complexes (ICs) with a variety of guest molecules, including many polymers, by threading and inclusion into their relatively hydrophobic interior cavities, which are roughly cylindrical, with diameters of ～0.5–1.0 nm. Warm water washing of crystalline CD‐ICs containing polymer guests insoluble in water or treatment with amylase enzymes serve to remove the host CDs and result in the coalescence of the guest polymers into solid bulk samples. When guest polymers are coalesced from their CD‐ICs by carefully removing the host CD lattices, they are observed to solidify with structures, morphologies, and even conformations that are distinct from bulk samples made from their solutions and melts. In addition, molecularly mixed, intimate blends can be obtained upon coalescence of two or more normally immiscible polymer guests from their common CD‐ICs. Not only are the organizations and behaviors of bulk polymer samples significantly modified on coalescence from their CD‐ICs, but both are also maintained for significant periods of time even when heated above their T_gs and T_ms, where their chains are mobile. Here, we discuss the long‐time, high temperature stabilities of the organizations and properties of bulk polymers coalesced from their crystalline CD‐ICs. While random‐coiling of their initially coalesced, largely extended, separated, and unentangled chains may be relatively rapid, we conclude that the subsequent slow establishment of homogeneous melts or phase‐segregated blends results from the extremely sluggish center‐of‐mass diffusion that must accompany full entanglement of their chains. Apparently, the process of entangling the largely separated and not fully interpenetrating randomly coiled chains initially coalesced from their CD‐ICs is particularly slow, much slower in fact than the center‐of mass diffusion of polymer chains in their fully entangled melts. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1543–1553, 2009     

Creation of novel polymer materials by processing with inclusion compounds

The processing of polymer materials from their inclusion compounds (ICs) formed with urea (U) and cyclodextrin (CD) hosts is described. Several examples are presented and serve to demonstrate the fabrication of unique polymer‐polymer composites and blends, including intimate blends of normally incompatible polymers, and the delivery of additives to polymers by means of embedding polymer‐ or additive‐U and CD‐ ICs into carrier polymer films and fibers, followed by coalescence of the IC guest, or by coalescence of two polymers or a polymer and an additive from their common CD‐IC crystals.     

Supramolecular structures based on dimeric combinations of cyclodextrin and adamantane via click chemistry

The cyclic starches α-, β-, and γ-cyclodextrins (CDs) readily form inclusion complexes (ICs) with a large variety of polymers. In polymer-CD-ICs, the CD hosts are threaded by the guest polymers, which must be highly extended, and stacks of polymer threaded host CDs pack closely together and crystallize. When guest polymers are coalesced from their CD-IC crystals, by washing with a solvent good, bad for CD, polymer, or treatment with an amylase enzyme, the guest polymers coalesce into bulk samples whose structures, morphologies, and even conformations are distinct from bulk samples made from their solutions and melts. We generally observe (i) crystallizable homopolymers coalesced from their CD-ICs to evidence increased levels of crystallinity, unusual polymorphs, and higher melting, crystallization, and decomposition temperatures, while coalesced amorphous homopolymers exhibit higher glass-transition temperatures, than samples consolidated from their disordered solutions and melts; (ii) molecularly mixed, intimate blends of two or more polymers that are normally believed to be immiscible can be achieved by coalescence from their common CD-IC crystals, (iii) the phase segregation of incompatible blocks can be controlled (suppressed or increased) when block copolymers are coalesced from their CD-IC crystals, and (iv) the thermal and temporal stabilities of the coalesced and well-mixed homopolymer blends and block copolymers appear to be substantial, thereby suggesting retention of as-coalesced structures and morphologies under normal thermal processing conditions. Furthermore, CDs may be covalently incorporated in polymers both during and after their syntheses, thereby providing a broad range of new functionalities for delivery of additives or to act as sensors or filters. Alternatively, additive-CD-ICs or additives rotaxanated with CDs may be effectively delivered to polymers. As an example, TiO₂—filled polypropylene fibers may be readily dyed in aqueous solution using water soluble CD-rotaxanated azo-dyes.     

Reorganization of the structures,morphologies, and conformations of polymers by coalescence from their crystalline inclusion compounds formed with cyclodextrins

We and several other research groups have recently reported the ability of cyclodextrins (CDs) to act as hosts in the formation of inclusion compounds (ICs) with guest polymers. Polymer-CD-ICs are crystalline materials formed by the close packing of host CD stacks, which results in a continuous channel of ∼5-10Å in diameter running down the interior of the CD stacks. The guest polymers are confined to the narrow, continuous CD channels, and so are necessarily highly extended and segregated from neighboring polymer chains by the walls of the CD stacks. We have shown that coalescence of guest polymers from their CD-IC crystals can result in a significant reorganization of the structures, morphologies, and even conformations that are normally observed in their bulk samples. For example, when poly(ethylene terephthalate) (PET) is coalesced from its γ-CD-IC, we find that in the non-crystalline regions of the sample the PET chains are adopting highly extended kink conformations, which result in their facile recrystallization from the melt and prevent quenching of the coalesced PET to achieve an amorphous sample during rapid cooling from above T_m. We have also created well-mixed blends of normally incompatible polymers by coalescing them from CD-ICs containing both polymers, where they are necessarily spatially proximal. Finally we have found the unique morphologies created by the coalescence of homopolymers, block copolymers, and homopolymer pairs from their CD-ICs are generally stable to heat treatment for substantial periods above their T_m's and/or T_g's, and so may be thermoplastically processed without loss of the unique morphologies achieved through coalescence from their CD-IC crystals.     

Intimate blending of binary polymer systems from their common cyclodextrin inclusion compounds

A procedure for the formation of intimate blends of three binary polymer systems polycarbonate (PC)/poly(methyl methacrylate) (PMMA), PC/poly(vinyl acetate) (PVAc) and PMMA/PVAc is described. PC/PMMA, PC/PVAc, and PMMA/PVAc pairs were included in γ‐cyclodextrin (γ‐CD) channels and were then simultaneously coalesced from their common γ‐CD inclusion compounds (ICs) to obtain intimately mixed blends. The formation of ICs between polymer pairs and γ‐CD were confirmed by wide‐angle X‐ray diffraction (WAXD), fourier transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). It was observed [solution ¹H nuclear magnetic resonance (NMR)] that the ratios of polymers in coalesced PC/PMMA and PC/PVAc binary blends are significantly different than the starting ratios, and PC was found to be preferentially included in γ‐CD channels when compared with PMMA or PVAc. Physical mixtures of polymer pairs were also prepared by coprecipitation and solution casting methods for comparison. DSC, solid‐state ¹H NMR, thermogravimetric analysis (TGA), and direct insertion probe pyrolysis mass spectrometry (DIP‐MS) data indicated that the PC/PMMA, PC/PVAc, and PMMA/PVAc binary polymer blends were homogeneously mixed when they were coalesced from their ICs. A single, common glass transition temperature (T_g) recorded by DSC heating scans strongly suggested the presence of a homogeneous amorphous phase in the coalesced binary polymer blends, which is retained after thermal cycling to 270 °C. The physical mixture samples showed two distinct T_gs and ¹H T_1ρ values for the polymer components, which indicated phase‐separated blends with domain sizes above 5 nm, while the coalesced blends exhibited uniform ¹H spin‐lattice relaxation values, indicating intimate blending in the coalesced samples. The TGA results of coalesced and physical binary blends of PC/PMMA and PC/PVAc reveal that in the presence of PC, the thermal stability of both PMMA and PVAc increases. Yet, the presence of PMMA and PVAc decreases the thermal stability of PC itself. DIP‐MS observations suggested that the degradation mechanisms of the polymers changed in the coalesced blends, which was attributed to the presence of molecular interactions between the well‐mixed polymer components in the coalesced samples. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2578–2593, 2005     

Thermal degradation of polycarbonate, poly(vinyl acetate) and their blends

We have recently developed a novel approach for intimately mixing thermodynamically incompatible polymers, which utilizes the formation of inclusion compounds (ICs) formed with host cyclodextrins (CDs), followed by removal of CD and coalescence of the common guest polymers into a blend. In this paper direct insertion probe pyrolysis mass spectrometry (DIP-MS) analyses of polycarbonate (PC), poly(vinyl acetate) (PVAc) and PC/PVAc blends, obtained by coalescence from their inclusion compounds formed with host γ-CD (coalesced blend) and by co-precipitation (physical blend), have been performed. Variations in the thermal stabilities of the coalesced polymers were recorded both by TGA and DIP-MS and compared to the corresponding as-received polymers. It has been determined that for both coalesced and physical blends of PC/PVAc, CH₃COOH formed by deacetylation of PVAc above 300 °C, reacts with PC chains decreasing their thermal stability. This process was more effective for the physical blend, most likely due to enhanced diffusion of CH₃COOH, produced by deacetylation of PVAc, into the PC domains, where it can further react producing low molecular weight PC fragments bearing methyl carbonate chain ends.     

Polymers coalesced from their cyclodextrin inclusion complexes: What can they tell us about the morphology of melt‐crystallized polymers?

Cyclodextrins (CDs) are cyclic polysaccharides with nano‐size, largely hydrophobic cavities, and exteriors covered with hydrophilic hydroxyl groups, making them water soluble. Threading and filling their cavities with polymer chains produces noncovalently bonded crystalline inclusion compounds (ICs). In this study, we formed fully covered, stoichiometric ICs between guest poly(L ‐lactic acid), poly(ε‐caprolactone), and nylon‐6 chains and host α‐CD. Coalesced samples of all three polymers were obtained after appropriately removing the stacked α‐CD host channels from their ICs. Distinct differential scanning calorimetriy (DSC) thermograms were observed for as‐received and coalesced samples, with the coalesced samples crystallizing faster at higher temperatures from their melts, and this distinction was maintained even after extensive, long‐time melt‐annealing (hours, days, and weeks). We believe this is due to the largely unentangled chains with extended conformations that are more densely packed in the initially coalesced samples. When small amounts (～2 wt %) of the coalesced polymers are used as self‐nucleating agents for their as‐received samples, the resulting self‐nucleated samples show DSC thermograms similar to those of the neat coalesced polymers, including their long‐time stability to melt‐annealing. Coalesced polymers, whether neat or in samples they self‐nucleate, may conserve their organization in the melt (largely extended and unentangled chains) for long periods, because the process of entangling the many chains influenced by a single initially extended unentangled coalesced chain, after it randomly coils, is extremely sluggish. By contrast, in melt‐crystallized or solution‐cast samples, polymer chains generally become fully randomly coiled, interpenetrate, and entangle after being heated and held in their melts for comparatively much shorter times. For example, we have recently observed (DSC) that ultra high molecular weight, gel‐spun spectra polyethylene (PE) fibers^® did not conserve or retain any memory of their as‐spun and highly drawn semicrystalline morphology even after spending as little as 2 min in the melt. As a consequence of the comparison to the behavior of coalesced polymer melts, we believe that polyethylene chains in Spectra fibers^® must be at least intimately dispersed within their crystalline regions, and likely partially coiled and entangled in their noncrystalline regions, thereby facilitating their rapid transformation into a full entanglement network of randomly coiling chains in the melt. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Glass‐transition temperatures of nanostructured amorphous bulk polymers and their blends

Nanostructured amorphous bulk polymer samples were produced by processing them with small molecule hosts. Urea (U) and gamma‐cyclodextrin (γ‐CD) were utilized to form crystalline inclusion compounds (ICs) with low and high molecular weight as‐received (asr‐) poly(vinyl acetate) (PVAc), poly(methyl methacrylate) (PMMA), and their blends as included guests. Upon careful removal of the host crystalline U and γ‐CD lattices, nanostructured coalesced (c‐) bulk PVAc, PMMA, and PVAc/PMMA blend samples were obtained, and their glass‐transition temperatures, T_gs, measured. In addition, non‐stoichiometric (n‐s)‐IC samples of each were formed with γ‐CD as the host. The T_gs of the un‐threaded, un‐included portions of their chains were observed as a function of their degree of inclusion. In all the cases, these nanostructured PVAc and PMMA samples exhibited T_gs elevated above those of their as‐received and solution‐cast samples. Based on their comparison, several conclusions were reached concerning how their molecular weights, the organization of chains in their coalesced samples, and the degree of constraint experienced by un‐included portions of their chains in (n‐s)‐γ‐CD‐IC samples with different stoichiometries affect their chain mobilities and resultant T_gs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1041–1050     

Morphological change of poly (ε‐caprolactone) with a wide range of molecular weight via formation of inclusion complex with α‐cyclodextrin

The effect of molecular weight of poly(ε‐caprolactone) (PCL) on the formation and stability of inclusion complexes (ICs) between α‐cyclodextrin (α‐CD) and PCL was investigated by FTIR, WAXD, and DSC measurements. ICs between α‐CD and PCLs with a wide range of number‐average molecular weight, M_n = 1.21 × 10⁴ – 1.79 × 10⁵, were prepared by mixing the aqueous solution of CD and acetone solution of PCL followed by stirring at 60 °C for 1h and at the room temperature for 1 day. FTIR, WAXD, and DSC measurement showed the PCL chains were included into the α‐CD cavity, and the crystallization of PCL was suppressed in the α‐CD cavity. Stoichiometry and yield of each IC varied with the molecular weight of guest PCL, and the effect of IC formation on the crystallization behaviour of guest polymer decreased with the increase of molecular weight of guest polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1433–1440, 2005     

Synthesis of bipolar charge transporting block copolymers and characterization for organic light‐emitting diode

A series of hole and electron transporting random and block copolymers consisting of triphenylamine moiety as a hole transporting unit and oxadiazole moiety as an electron transporting unit have been prepared via a nitroxide mediated radical polymerization. Oxadiazole monomers with t‐butyl or trifluoromethyl groups, 2 and 7, respectively, were used for copolymerization. Photoluminescent measurements of polymers revealed that the formation of the exciplex between triphenylamine and oxadiazole units tends to occur in the order of random copolymers, block copolymers, and polymer blends, implying phase‐separated morphologies in block or blend systems. The polymers were applied for OLED devices, and we found that the morphology in the polymer layer critically affected device performance. The block copolymer comprising hole and electron transporting units with the composition of 14/86 showed the highest external quantum efficiency over 10%. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1461–1468, 2010     

Reorganization of the structures,morphologies, and conformations of bulk polymers via coalescence from polymer–cyclodextrin inclusion compounds

Bulk poly(ethylene terephthalate) (PET) and bisphenol A polycarbonate (PC) samples have been produced by the coalescence of their segregated, extended chains from the narrow channels of the crystalline inclusion compounds (ICs) formed between the γ‐cyclodextrin (CD) host and PET and PC guests, which are reported for the first time. Differential scanning calorimetry, Fourier transform infrared, and X‐ray observations of PET and PC samples coalesced from their crystalline γ‐CD‐ICs suggest structures and morphologies that are different from those of samples obtained by ordinary solution and melt processing techniques. For example, as‐received PC is generally amorphous with a glass‐transition temperature (T_g) of about 150 °C; when cast from tetrahydrofuran solutions, PC is semicrystalline with a melting temperature (T_m) of about 230 °C; and after PC/γ‐CD‐IC is washed with hot water for the removal of the host γ‐CD and for the coalescence of the guest PC chains, it is semicrystalline but has an elevated T_m value of about 245 °C. PC crystals formed upon the coalescence of highly extended and segregated PC chains from the narrow channels in the γ‐CD host lattice are possibly more chain‐extended and certainly more stable than chain‐folded PC crystals grown from solution. Melting the PC crystals formed by coalescence from PC/γ‐CD‐IC produces a normal amorphous PC melt that, upon cooling, results in typical glassy PC. PET coalesced from its γ‐CD‐IC crystals, although also semicrystalline, displays a T_m value only marginally elevated from that of typical bulk or solution‐crystallized PET samples. However, after the melting of γ‐CD‐IC‐coalesced PET crystals, it is difficult to quench the resultant PET melt into the usual amorphous PET glass, characterized by a T_g value of about 80 °C. Instead, the coalesced PET melt rapidly recrystallizes during the attempted quench, and so upon reheating, it displays neither a T_g nor a crystallization exotherm but simply remelts at the as‐coalesced T_m. This behavior is unaffected by the coalesced PET sample being held above T_m for 2 h, indicating that the extended, unentangled nature of the chains in the noncrystalline regions of the coalesced PET are not easily converted into the completely disordered, randomly coiled, entangled melt. Apparently, the highly extended, unentangled characters of the PC and PET chains in their γ‐CD‐ICs are at least partially retained after they are coalesced. Initial differential scanning calorimetry, thermogravimetric analysis, Fourier transform infrared, and X‐ray observations are described here. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 992–1012, 2002     

Intimate blend of poly(ethylene terephthalate) and poly(ethylene 2,6‐naphthalate) via formation with and coalescence from their common inclusion compound with γ‐cyclodextrin

The experimental procedures to place poly(ethylene 2,6‐naphthalate) (PEN) guest molecules within γ‐cyclodextrin (γ‐CD) host molecules are described along with the subsequent verification of inclusion‐compound (IC) formation. In addition, the simultaneous complexing of PEN and poly(ethylene terephthalate) (PET) with γ‐CD to form their common IC is documented. Coalescence from their common γ‐CD IC generates an intimate blend of the PET and PEN polymers contained therein. Thermal analysis via differential scanning calorimetry reveals thermal behavior indicative of an intimate blend of PET and PEN. ¹H NMR analysis confirms that the intimate blending of PET and PEN achieved by coalescence from their common γ‐CD IC is not due to transesterification into a PET/PEN copolymer during thermal analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 139–148, 2003     

Crystalline inclusion complexes formed between the drug diflunisal and block copolymers

The solid form of drugs plays a central role in optimizing the physicochemical properties of drugs, and new solid forms will provide more options to achieve the desirable pharmaceutical profiles of drugs. Recently, certain drugs have been found to form crystalline inclusion complexes (ICs) with multiple types of linear polymers, representing a new subcategory of pharmaceutical solids. In this study, we used diflunisal (DIF) as the model drug host and extended the guest of drug/polymer ICs from homopolymers to block copolymers of poly(ethylene glycol) (PEG) and poly(ε-caprolactone) (PCL). The block length in the guest copolymers showed a significant influence on the formation, thermal stability and dissolution behavior of the DIF ICs. Though the PEG block could hardly be included alone, it could indeed be included in the DIF ICs when the PCL block was long enough. The increase of the PCL block length produced IC crystals with improved thermal stability. The dissolution profiles of DIF/block copolymer ICs exhibited gradually decreased aqueous solubility and dissolution rate with the increasing PCL block length. These results demonstrate the possibility of using drug/polymer ICs to modulate the desired pharmaceutical profiles of drugs in a predictable and controllable manner.     

Opposite trends in thermodynamic compatibility between copolyamide and chitosan in their binary blend

Gibbs energy, enthalpy, and entropy of mixing in binary blends of chitosan with ter‐copolyamide 6/66/610 at ambient conditions have been determined over the entire concentration range using thermodynamic cycle based on dissolution of individual polymers and their blends of different composition in a common solvent – formic acid. Experimental procedure included stepwise equilibrium vapor sorption of glacial formic acid on the cast films and isothermal microcalorimetry of dissolution of these films in liquid glacial formic acid at 25 °C. Formic acid appeared to be a very good solvent for individual polymers and their blends. Flory‐Huggins interaction parameter determined from sorption isotherms was negative and varied from ?2.56 to ?1.79 depending upon blend composition. The enthalpies of dissolution of individual polymers and their blends were strongly exothermic and varied from ?200 to ?40 Joule/g. Independent thermodynamic cycles for Gibbs free energy and enthalpy remarkably revealed similar trends in concentration dependence of different thermodynamic functions of mixing between chitosan and copolyamide. At high chitosan content, the binary blend is characterized by large and negative values of Gibbs free energy, enthalpy, and entropy of mixing that provide high polymer compatibility. On the contrary, at high copolyamide content the blends are incompatible and are characterized by positive values of enthalpy, entropy, and Gibbs free energy of mixing. Such complicated thermodynamic behavior is the result of the superposition of strong molecular interactions (H‐bonds) between polymers in the blend and isothermal fusion of copolyamide crystallites. Thermodynamic analysis correlates well with the data obtained by polarized microscopy. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2603–2613, 2007     

Supramolecular inclusion complexes of star‐shaped poly(ε‐caprolactone) with α‐cyclodextrin

Both star‐shaped poly(ε‐caprolactone) (PCL) having 4 arms (4sPCL) and 6 arms (6sPCL) and linear PCL having 1 arm (LPCL) and 2 arms (2LPCL) were synthesized and then investigated for inclusion complexation with α‐cyclodextrin (α‐CD). The supramolecular inclusion complexes (ICs) were in detail characterized by ¹H NMR, differential scanning calorimetry, thermogravimetric analysis, wide angle X‐ray diffraction, solid‐state carbon nuclear magnetic resonance spectroscopy using cross‐polarization and magic‐angle spinning, and Fourier transform infrared, respectively. The stoichiometry (CL:CD, mol:mol) of all ICs increased with the increasing branch arm of PCL polymers, and it was in the order of α‐CD‐6sPCL1 ICs > α‐CD‐4sPCL ICs > α‐CD‐2LPCL ICs > α‐CD‐LPCL ICs. All analyses indicated that the branch arms of star‐shaped PCL polymers were included into the hydrophobic α‐CD cavities and their original crystalline properties were completely suppressed. Moreover, the ICs of star‐shaped PCL with α‐CD had a channel‐type crystalline structure similar to that formed between the linear PCL and α‐CD. Furthermore, the thermal stability of the free PCL polymers probably controlled that of the guest polymers included in the ICs. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4721–4730, 2005     

Viscoelastic interfacial properties of compatibilized poly(ε‐caprolactone)/polylactide blend

Poly(ε‐caprolactone)/polylactide blend (PCL/PLA) is an interesting biomaterial because the two component polymers show good complementarity in their physical properties. However, PCL and PLA are incompatible thermodynamically and hence the interfacial properties act as the important roles controlling the final properties of their blends. Thus, in this work, the PCL/PLA blends were prepared by melt mixing using the block copolymers as compatibilizer for the studies of interfacial properties. Several rheological methods and viscoelastic models were used to establish the relations between improved phase morphologies and interfacial properties. The results show that the interfacial behaviors of the PCL/PLA blends highly depend on the interface‐located copolymers. The presence of copolymers reduces the interfacial tension and emulsified the phase interface, leading to stabilization of the interface and retarding both the shape relaxation and the elastic interface relaxation. As a result, besides the relaxation of matrices (τ_m) and the shape relaxation of the dispersed PLA phase (τ_F), a new relaxation behavior (τ_β), which is attribute to the relaxation of Marangoni stresses tangential to the interface between dispersed PLA phase and matrix PCL, is observed on the compatibilized blends. In contrast to that of the diblock copolymers, the triblock copolymers show higher emulsifying level. However, both can improve the overall interfacial properties and enhance the mechanical strength of the PCL/PLA blends as a result. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 756–765, 2010     

Formation of crystalline inclusion compounds of poly (vinyl chloride) of different stereoregularity with γ-cyclodextrin

This work reports the formation and detailed characterization of the γ-cyclodextrin (γ-CD) inclusion compounds (ICs) formed with two poly (vinyl chloride) samples with different isotactic content. The ICs were characterized by X-ray diffraction, solid state ¹³C-NMR, solution ¹H-NMR, FT-infrared, differential scanning calorimetry, and thermogravimetric analysis. Experimental evidence of the inclusion of the guest polymer chains into the narrow channels created by the γ-CD crystalline host lattice has been obtained. Examination of coalesced poly (vinyl chlorides) (PVCs) obtained after the host γ-CD is removed reveals different characteristics specifically for the coalesced PVC sample with higher isotactic content. An increase in T_g was observed by DSC for this PVC. To the contrary, the T_g of the coalesced PVC sample with lower isotactic content is almost the same as that of the as-synthesized sample. Thermogravimetric analysis indicated that coalesced PVC with higher isotactic content acquires a degree of stabilization after modification by threading into and being extracted from its γ-CD IC. The results suggest that an irreversible conformational change takes place when PVC forms ICs with a solid host lattice like γ-CD. The PVC molecules extend and reorganize into a more stable conformation in the IC, consequently improving the properties of the coalesced sample. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2503–2513, 2007     

Synthesis and MALDI‐TOF analysis of dendritic‐linear block copolymers of lactides: Influence of architecture on stereocomplexation

Formation of a stereocomplex from polylactide copolymers can be tuned by changing the size and the chain topology of the second block in the copolymer. In particular, the use of a dendritic instead of linear architecture is expected to destabilize the cocrystallisation of polylactide blocks. With this idea in mind, dendritic‐linear block copolymers were synthesized by ring‐opening polymerization (ROP) of lactides using benzyl alcohol dendrons of generation 1–3 as macroinitiators and stannous octoate as catalyst. Polymers with controlled and narrow molar mass distribution were obtained. The MALDI‐TOF mass spectra of these dendritic‐linear block copolymers show well‐resolved signals. Remarkably, 10% or less of odd‐membered polymers are present, indicating that ester‐exchange reactions which occur classically parallel to the polymerization process, were in these conditions, very limited. Thermal analysis of polyenantiomers of generation 1–3 and the corresponding blends were examined. The blend of a pair of enantiomeric dendritic‐linear block copolymers exhibit a higher melting temperature than each copolymer, characteristic for the formation of a stereocomplex. Melting temperatures are strongly dependent on the dendron generation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6782–6789, 2006