Water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate with a terminal azobenzene moiety

Novel water‐soluble triply‐responsive homopolymers of N,N‐dimethylaminoethyl methacrylate (DMAEMA) containing an azobenzene moiety as the terminal group were synthesized by atom transfer radical polymerization (ATRP) technique. The ATRP process of DMAEMA was initiated by an azobenzene derivative substituted with a 2‐bromoisobutyryl group (Azo‐Br) in the presence of CuCl/Me₆TREN in 1,4‐dioxane as a catalyst system. The molecular weights and their polydispersities of the resulting homopolymers (Azo‐PDMAEMA) were characterized by gel permeation chromatography (GPC). The homopolymers are soluble in aqueous solution and exhibit a lower critical solution temperature (LCST) that alternated reversibly in response to Ph and photoisomerization of the terminal azobenzene moiety. It was found that the LCST increased as pH decreased in the range of testing. Under UV light irradiation, the trans‐to‐cis photoisomerization of the azobenzene moiety resulted in a higher LCST, whereas it recovered under visible light irradiation. This kind of polymers should be particularly interesting for a variety of potential applications in some promising areas, such as drug controlled‐releasing carriers and intelligent materials because of the multistimuli responsive property. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2564–2570, 2010     

Doubly photoresponsive and water‐soluble block copolymers: Synthesis and thermosensitivity

We report the synthesis and investigation of a new type of photoresponsive block copolymers (BCPs). They were designed to comprise two water‐soluble polymers containing two different photoisomerizable moieties (either azobenzene and spiropyran or two different azobenzenes), with the two constituting blocks that, when separated, exhibit a lower critical solution temperature (LCST) in water and can shift their LCST in opposite directions upon photoisomerization (decrease of LCST for one polymer and increase for the other). A variety of such doubly photoresponsive BCPs were synthesized using either azobenzene‐ or spiropyran‐containing poly(N,N‐dimethylacrylamide) (PDMA), poly(N‐isopropylacrylamide) (PNIPAM) and poly[methoxydi(ethylene glycol) methacrylate] (PDEGMMA). Their thermal phase transition behaviors in aqueous solution before and after simultaneous photoreactions on the two blocks were investigated in comparison with their constituting blocks, by means of solution transmittance (turbidity) and variable‐temperature ¹H NMR measurements. The results show that BCPs displayed a single LCST whose shift upon two photoisomerizations appeared to be determined by the competing and opposing photoinduced effects on the two blocks. Moreover, optically controlling the relative photoisomerization degrees of trans azobenzene‐to‐cis azobenzene and spiropyran‐to‐merocyanine could be used to tune the LCST of BCP solution. This study demonstrates the potential of exploring a more complex photoreaction scheme to optically control the solution properties of water‐soluble thermosensitive BCPs. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4055–4066, 2010     

A new thermo‐responsive block copolymer with tunable upper critical solution temperature and lower critical solution temperature in the alcohol/water mixture

The multi‐thermo‐responsive block copolymer of poly[2‐(2‐methoxyethoxy)ethyl methacrylate]‐block‐poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PMEO₂MA‐b‐PVEA) displaying phase transition at both the lower critical solution temperature (LCST) and the upper critical solution temperature (UCST) in the alcohol/water mixture is synthesized by reversible addition‐fragmentation chain transfer polymerization. The poly[2‐(2‐methoxyethoxy)ethyl methacrylate] (PMEO₂MA) block exhibits the UCST phase transition in alcohol and the LCST phase transition in water, while the poly[N‐(4‐vinylbenzyl)‐N,N‐diethylamine] (PVEA) block shows the UCST phase transition in isopropanol and the LCST phase transition in the alcohol/water mixture. Both the polymer molecular weight and the co‐solvent/nonsolvent exert great influence on the LCST or UCST of the block copolymer. By adjusting the solvent character including the water content and the temperature, the block copolymer undergoes multiphase transition at LCST or UCST, and various block copolymer morphologies including inverted micelles, core‐corona micelles, and corona‐collapsed micelles are prepared. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 4399–4412     

Thermosensitive copolymers having soluble and insoluble monomer units,poly(N‐vinylacetamide‐co‐methyl acrylate)s: Effect of additives on their lower critical solution temperatures

New thermosensitive polymers were synthesized by copolymerization between N‐vinylacetamide (NVA) and methyl acrylate whose homopolymers are soluble and insoluble in water, respectively. The lower critical solution temperature (LCST) of the obtained copolymers ranged between 59 and 83 °C, and the LCST increased with an increasing NVA content in the copolymers. The effectiveness of various salts addition on lowering the LCST of the copolymer solutions followed Hoffmeister series. NaCl and Na₂SO₄ addition linearly lowered the LCST with an increasing salts concentration, and slopes of the lines were almost constant regardless of the copolymer composition. The effectiveness of alcohols with various alkyl chain lengths on lowering the LCST did not follow the viscosity B coefficient values of the alcohols, which was probably the result of preferential adsorption of the alcohols to the copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2651–2658, 2004     

Synthesis and characterization of an azobenzene‐ and acrylamide‐based photoresponsive copolymer and gel

This article reports the synthesis and characterization of a new type of copolymer consisting of acrylamide and trans‐4‐methacroyloxyazobenzene and their gel. Free‐radical polymerization initiated with 2,2′‐azobisisobutyronitrile was used to conduct the synthesis although N,N′‐methylene bisacrylamide was used as a crosslinking agent for the gel synthesis. Despite the insolubility of the different monomers in a single solvent, a certain ratio of water/tetrahydrofuran (THF) enabled the propagating species to stay in the solution and thus to facilitate chain growth. The solubility, Fourier transform infrared spectra, and solid‐state ¹³C NMR investigations revealed that two monomers in the copolymer were chemically bonded. The compositions of the incorporated acrylamide and azobenzene in the copolymer and the gel were determined by NMR spectroscopy. Because the potential actuating behavior of such materials was due to the volume change involved in reversible solvent uptake, the sorption and evaporation of the gel were also investigated and showed that the gel could absorb about 460% water, which corresponded to a polymer content of the weight gel of 18% and was compatible with thermogravimetric analysis of a saturated gel that revealed about 83 wt % of a swollen gel was lost within 12 h. Finally, photoinduced trans–cis isomerization kinetics of the copolymer was investigated in a 30:70 mixture of water and THF against irradiation time. A photostationary state was reached within 5.5 min with a corresponding conversion of 70% of the trans isomer to the cis form. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2886–2896, 2004     

Azobenzene‐based initiator for atom transfer radical polymerization of methyl methacrylate

2‐Bromopropionic acid 2‐(4‐phenylazophenyl)ethyl ester, 2‐bromopropionic acid 6‐(4‐phenylazophenoxy)hexyl ester (BPA₆), 2‐bromopropionic acid‐(4‐phenylazoanilide), and 2‐bromopropionic acid 4‐[4‐(2‐bromopropionyloxy)phenylazo]phenyl ester (BPPE) were used as initiators with monofunctional or difunctional azobenzene for the heterogeneous atom transfer radical polymerization of methyl methacrylate with a copper(I) chloride/N,N,N′,N″,N″‐pentamethyldiethylenetriamine catalytic system. The rates of polymerizations exhibited first‐order kinetics with respect to the monomer, and a linear increase in the number‐average molecular weight with increasing monomer conversion was observed for these initiation systems. The polydispersity indices of the polymer were relatively low (1.15–1.44) up to high conversions in all cases. The fastest rate of polymerization and the highest initiation efficiency were achieved with BPA₆, and this could be explained by the longer distance between the halogen and azobenzene groups and the better solubility of the BPA₆ initiator. The redshifting of the UV absorptions of the polymers only occurred for the BPPE‐initiated system. The intensity of the UV absorptions of the polymers were weaker than those of the corresponding initiators in chloroform and decreased with the increasing molecular weights of the polymers in all cases. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2358–2367, 2005     

Design and proof of reversible micelle‐to‐vesicle multistimuli‐responsive morphological regulations

Multistimuli‐responsive precise morphological control over self‐assembled polymers is of great importance for applications in nanoscience as drug delivery system. A novel pH, photoresponsive, and cyclodextrin‐responsive block copolymer were developed to investigate the reversible morphological transition from micelles to vesicles. The azobenzene‐containing block copolymer poly(ethylene oxide)‐b‐poly(2‐(diethylamino)ethyl methacrylate‐co‐6‐(4‐phenylazo phenoxy)hexyl methacrylate) [PEO‐b‐P(DEAEMA‐co‐PPHMA)] was synthesized by atom transfer radical polymerization. This system can self‐assemble into vesicles in aqueous solution at pH 8. On adjusting the solution pH to 3, there was a transition from vesicles to micelles. The same behavior, that is, transition from vesicles to micelles was also realizable on addition of β‐cyclodextrin (β‐CD) to the PEO‐b‐P(DEAEMA‐co‐PPHMA) solution at pH 8. Furthermore, after β‐CD was added, alternating irradiation of the solution with UV and visible light can also induce the reversible micelle‐to‐vesicle transition because of the photoinduced trans‐to‐cis isomerization of azobenzene units. The multistimuli‐responsive precise morphological changes were studied by laser light scattering, transmission electron microscopy, and UV–vis spectra. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of novel side‐chain triphenylamine polymers with azobenzene moieties via RAFT polymerization and investigation on their photoelectric properties

Two novel and well‐defined polymers, poly[6‐(5‐(diphenylamino)‐2‐((4‐methoxyphenyl)diazenyl)phenoxy)hexyl methacrylate] (PDMMA) and poly[6‐(4‐((3‐ethynylphenyl)diazenyl) phenoxy)hexyl methacrylate] (PDPMMA), which bear triphenylamine (TPA) incorporated to azobenzene either directly (PDMMA) or with an interval (PDPMMA) as pendant groups were successfully prepared via reversible addition‐fragmentation chain transfer polymerization technique. The electrochemical behaviors of PDPMMA and PDMMA were investigated by cyclic voltammograms (CV) measurement. The hole mobilities of the polymer films were determined by fitting the J‐V (current‐voltage) curve into the space‐charge‐limited current method. The influence of photoisomerization of the azobenzene moiety on the behaviors of fluorescence emission, CV and hole mobilities of these two polymers were studied. The fluorescent emission intensities of these two polymers in CH₂Cl₂ were increased by about 100 times after UV irradiation. The oxidation peak currents (I_OX) of the PDMMA and PDPMMA in CH₂Cl₂ were increased after UV irradiation. The photoisomerization of the azobenzene moiety in PDMMA had significant effect on the electrochemical behavior, compared with that in PDPMMA. The changes of the hole mobility before and after UV irradiation were very small for both polymers. The HOMO energies (E_HOMO, HOMO: the highest occupied molecular orbital) of side chain moieties of TPA incorporated with cis‐isomer and trans‐isomer of azobenzene in PDMMA and PDPMMA were obtained by theoretical calculation, which are basically consistent with the experimental results. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Controlled grafting of ethyl cellulose with azobenzene‐containing polymethacrylates via atom transfer radical polymerization

Graft copolymers of ethyl cellulose with azobenzene‐containing polymethacrylates were synthesized through atom transfer radical polymerization (ATRP). The residual hydroxyl groups on ethyl cellulose were first esterified with 2‐bromoisobutyryl bromide to yield 2‐bromoisobutyryloxy groups, which was then used to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) in the presence of CuBr/N,N,N′,N″,N″‐pentamethylenetriamine (PMDETA) as catalyst and anisole as solvent. The graft copolymers were characterized by gel permeation chromatography (GPC) and ¹H‐NMR. The molecular weights of the graft copolymers increased relatively to the macroinitiator, and the polydispersities were narrow. The thermal and liquid crystalline property of the graft copolymers were investigated by differential scanning calorimeter (DSC) and polarizing optical microscope (POM). Photoresponsive property was studied under the irradiation of UV–vis light in THF solution. The graft copolymers have potential applications, including sensors and optical materials. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1653–1660, 2007     

Synthesis of comb‐branched polyacrylamide with cationic poly[(2‐dimethylamino)ethyl methacrylate dimethylsulfate] quat

Comb‐branched polyelectrolytes with polyacrylamide backbones and poly[(2‐dimethylamino)ethyl methacrylate methylsulfate] (polyDMAEMA‐DMS) side chains were prepared by free‐radical macromonomer polymerization. PolyDMAEMA‐DMS macromonomers bearing terminal styrenic moieties were synthesized by living anionic polymerization with lithium 4‐vinylbenzylamide (LiVBA) and lithium N‐isopropyl‐4‐vinylbenzylamide (LiPVBA) as initiators. In the presence of LiCl, LiPVBA initiated a living polymerization of 2‐(dimethylamino)ethyl methacrylate (DMAEMA) and produced polymers with well‐controlled molecular weights and low polydispersities. LiVBA could not directly initiate DMAEMA polymerization. After being capped with two units of dimethylacrylamide, DMAEMA polymerized with an initiator efficiency of 63%. The quaternization of the poly[(2‐dimethylamino)ethyl methacrylate] macromonomer with dimethyl sulfate yielded the cationic polyDMAEMA‐DMS macromonomer. The polyDMAEMA‐DMS macromonomer had a much higher reactivity than acrylamide in free‐radical polymerization. This might have been due to the formation of polyDMAEMA‐DMS micelles in the polymerization system. The high macromonomer reactivity caused composition drift in a batch process. A semibatch method with a constant polyDMAEMA‐DMS feed rate was used to control the copolymer composition. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2394–2405, 2002     

Latent solid‐phase extraction with thermoresponsive soluble polymers

The use of soluble thermoresponsive polymers to sequester or scavenge hydrophobic guest molecules from dilute aqueous solutions on heating is described. In these studies, a homopolymer of N‐isopropylacrylamide was shown to sequester 46–83% of a soluble monochlorotriazine from 0.1–10 ppm aqueous solutions when heating above this polymer's lower critical solution temperature (LCST). Substitution of the reactive piperidine‐containing 20:1 copolymer poly(N‐isopropylacrylamide)‐c‐poly[N‐4‐(acrylamidomethyl)piperidine] for this unreactive polymer led to >98% scavenging of these same triazines when heating above this reactive polymer's LCST. The monochlorotriazine guests studied included the herbicide atrazine and two dye‐labeled analogues of this herbicide. In one case, an atrazine analogue was designed so as to contain a dansyl group for fluorescence analysis. In the second case, an atrazine analogue was labeled with a methyl red group to facilitate visual and spectrophotometric analysis. Atrazine concentrations were measured with liquid chromatography–mass spectrometry. The enhanced efficiency of the reactive piperidine‐containing copolymer scavenger in removing triazines from solution is attributed to covalent bond formation by nucleophilic aromatic substitution of the chlorine of the monochlorotriazines by the piperidine nucleophile on the copolymer. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6309–6317, 2004     

Polysiloxanes with chlorobenzyl groups as precursors of new organic‐silicone materials

Various polysiloxanes bearing chlorobenzyl side groups were synthesized by the hydrolytic polycondensation of the 73:27 mol/mol mixture of [2‐(4‐chloromethylphenyl)ethyl] methyldichlorosilane and [1‐(4‐chloromethylphenyl)ethyl] methyldichlorosilane followed by the cationic equilibration or coequilibration with octamethylcyclotetrasiloxane, D₄. 1,3‐Divinyltetramethyl‐disiloxane was used as the chain end blocker to obtain a vinyl–Si ended chlorobenzyl‐substituted polysiloxane. In some cases, the polymer was additionally treated with dimethylvinylchlorosilane to achieve full substitution of chain ends by the vinyl group. Cohydrolysis of the chlorobenzylic monomer mixture with dimethyldichlorosilane was also practiced. Multiblock copolymers were obtained by polyhydrosilylation of the α,ω‐divinylsilyl chlorobenzyl‐substituted polysiloxanes with α,ω‐dihydrosilyl polydimethylsiloxanes. All these polymers and copolymers containing reactive chlorobenzylic groups were demonstrated to be convenient precursors of functional polysiloxanes of potential practical use. Some specific functional groups, such as quaternary ammonium salt groups of biocidal activity or azobenzene groups making the polymer sensitive to external stimuli by light, may be readily generated on polysiloxane under mild conditions. The chlorobenzylic substituted polysiloxanes may be also used as macroinitiators of the atom transfer radical polymerization, to obtain polysiloxanes with grafted organic polymers, such as styrene, 4‐chloromethylstyrene, and n‐butylacrylate. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1682–1692, 2004     

Synthesis,characterization, and drug release behaviors of a novel thermo‐sensitive poly(N‐acryloylglycinates)

In this study, a novel thermo‐sensitive poly(N‐acryloylglycinates) was prepared in order to get a potential drug release carrier. The corresponding monomers and the polymers were characterized with Fourier‐transform infrared (FTIR) and ¹H NMR. The thermo‐sensitivity of the poly(N‐acryloylglycinates) was evaluated by measuring their lower critical solution temperatures (LCST) in water, inorganic salt solution, and different pH solutions. The results indicated that poly(N‐acryloylglycine methyl ester) (NAGME) and poly(N‐acryloylglycine ethyl ester) (NAGEE) exhibit a reversible thermo‐sensibility in their aqueous solutions at 61.5 and 12.5°C, respectively. However, no thermo‐sensitive behavior of poly(N‐acryloylglycine propyl ester) (NAGPE) was found due to its over hydrophobicity. The swelling studies on hydrogels were carried out at different temperatures, in different pH, and inorganic salt solutions. The hydrogels showed a remarkable phase transition at about 35°C with changing temperature. The release rate of caffeine from the thermo‐sensitive hydrogel was apparently decreased as the crosslinker content increased and temperature decreased. Seventy five percent caffeine from the polymeric hydrogel with 5% NMBA (N, N‐methylenebis(acrylamide)) was released at room temperature within 240 min, whereas 95.4% caffeine diffused into the medium at 37°C. Copyright © 2009 John Wiley & Sons, Ltd.     

Synthesis of thermo‐responsive 4‐arm star‐shaped porphyrin‐centered poly(N,N‐diethylacrylamide) via reversible addition‐fragmentation chain transfer radical polymerization

Tetrafunctional porphyrins‐containing trithiocarbonate groups were synthesized by an ordinary esterification method. This tetrafunctional porphyrin (TPP‐CTA) could be used as a chain transfer agent in a controlled reversible addition‐fragmentation chain transfer (RAFT) radical polymerization to prepare well‐defined 4‐arm star‐shaped polymers. N,N‐Diethylacrylamide was polymerized using TPP‐CTA in 1,4‐dioxane. Poly(N,N‐diethylacrylamide) (PDEA) is known to be a thermo‐responsive polymer, and exhibits a lower critical solution temperature (LCST) in water. The star‐shaped PDEA polymer (TPP‐PDEA) was therefore also thermo‐responsive, as expected. The LCST of this polymer depended on its concentration in water, as confirmed by turbidity, dynamic light scattering (DLS), static light scattering (SLS), and ¹H NMR measurements. The porphyrin cores were compartmentalized in PDEA shells in aqueous media. Below the LCST, the fluorescence intensity of TPP‐PDEA was about six times larger than that of a water‐soluble low molecular weight porphyrin compound (TSPP), whose fluorescence intensity was independent of temperature. Above the LCST, the fluorescence intensity of TPP‐PDEA decreased, while the intensity was about three times higher than that of TSPP. These observations suggested that interpolymer aggregation occurred due to the hydrophobic interactions of the dehydrated PDEA arm chains above the LCST, with self‐quenching of the porphyrin moieties arising from these interactions. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

A visible light responsive azobenzene‐functionalized polymer: Synthesis,self‐assembly,and photoresponsive properties

A novel visible light responsive random copolymer consisting of hydrophobic azobenzene‐containing acrylate units and hydrophilic acrylic acid units has been prepared. The azobenzene molecule bearing methoxy groups at all four ortho positions is readily synthesized by one‐step conversion of diazotization. The as‐prepared polymer can self‐assemble into nanoparticles in water due to its amphiphilic nature. The tetra‐o‐methoxy‐substituted azobenzene‐functionalized polymer can exhibit the trans‐to‐cis photoswitching under the irradiation with green light of 520 nm and the cis‐to‐trans photoswitching under the irradiation with blue light of 420 nm in both solution and aggregate state. The morphologies of the self‐assembled nanoparticles are revealed by TEM and DLS. The controlled release of loaded molecules from the nanoparticles can be realized by adjusting pH value since the copolymer possesses pH responsive acrylic acid groups. The fluorescence of loaded Nile Red in the nanoparticles can be tuned upon the visible light irradiation. The reversible photoswitching of the azobenzene‐functionalized polymer under visible light may endow the polymer with wide applications without using ultraviolet light at all. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2768–2775     

Synthesis,characterization, photo‐induced alignment,and surface orientation of poly(9,9‐dioctylfluorene‐alt‐azobenzene)s

Three types of bi‐functionalized copolymers ( P1FAz , P2FAz , and P3FAz ) with different numbers of fluorene units and an azobenzene unit were synthesized and characterized using UV–vis and polarized absorption spectroanalysis. The trans‐cis photoisomerization was conformed under 400 nm light irradiation for all copolymers in chloroform. However, in the film state, only the trans‐cis photoisomerization occurred by mono‐fluorene attached copolymer poly[(9,9‐di‐n‐octylfluorenyl‐2,7‐diyl)‐alt‐4,4′‐azobenzene)] ( P1FAz ). Photo‐induced alignment was achieved using the P1FAz film after irradiation with linear polarized 400 nm light and subsequent annealing at 60 °C. Surface orientation of a spin‐coating film of poly(9,9‐didodecylfluorene) ( F12 ) was achieved using the photo‐induced alignment layer of the P1FAz film after annealing at 90 °C. The photo‐induced alignment layer of P1FAz has potential application to the surface orientation technique for appropriate polymers, which will be useful for the fabrication of optoelectronics devices. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Highly active,thermo‐responsive polymeric catalytic system for reuse in aqueous and organic CuAAC reactions

Tris‐(benzyltriazolylmethyl)amine (TBTA) has been immobilized onto a styrenic monomer and subsequently copolymerized with N‐isopropyl acrylamide (NIPAM) to afford catalytically active thermo‐responsive copolymers for copper assisted click chemistry. P(TBTA‐co‐NIPAM) copolymers were synthesized with incorporation of between 2 and 10 ligand units per chain and tuneable molecular weight (28–148 kDa). A combination of ¹H NMR spectroscopy, size exclusion chromatography (SEC) and elemental analysis (EA) confirmed the controlled synthesis of these polymers and allowed for quantification of the degree of TBTA‐functionalized monomer incorporation. After loading with copper(I) bromide, this homogeneous catalyst system was added to a water/ethyl acetate two‐phase system. Using this biphasic system aqueous click reactions could be performed at room temperature, while organic click chemistry could be performed above the cloud point temperature of the catalyst system. The polymer catalyst system could be regenerated via extraction by making use of its lower critical solution temperature (LCST)‐behavior, and then reused for further copper(I) catalyzed azide‐alkyne cycloaddition (CuAAC) reactions. While a reduced catalytic activity is observed as a result of copper leaching in aqueous click reactions, the recycling experiments in the organic phase demonstrated that this copolymer supported system allows for efficient recycling and reuse. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Temperature‐induced phase transition of poly(N‐n‐propylacrylamide‐co‐butyl methacrylate‐co‐N,N‐diethylaminoethyl methacrylate)

Terpolymers composed of N‐n‐propylacrylamide (NPAAm), butyl methacrylate (BMA), and N,N‐diethylaminoethyl methacrylate (DEAEMA) were prepared in an attempt to investigate the temperature‐induced phase transition and its mechanism. Poly(NPAAm) showed the lower critical solution temperature (LCST) around 24°C in water. With the incorporation of DEAEMA with NPAAm, the LCST change was characterized by an initial increase. However, the LCST was shifted to the lower temperature at the later stage. This might be explained in terms of hydrophilic/hydrophobic contribution of DEAEMA to the LCST. The swelling behavior of copolymer gel in the various solvents and spin‐lattice relaxation time (T₁) study by NMR strongly suggested the hydrophilic/hydrophobic contribution of DEAEMA to the LCST depending on the local environment. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 1407–1411, 1999     

Synthesis and characterization of 4‐arm star side‐chain liquid crystalline polymers containing azobenzene with different terminal substituents via ATRP

4‐Arm star side‐chain liquid crystalline (LC) polymers containing azobenzene with different terminal substituents were synthesized by atom transfer radical polymerization (ATRP). Tetrafunctional initiator prepared by the esterification between pentaerythritol and 2‐bromoisobutyryl bromide was utilized to initiate the polymerization of 6‐[4‐(4‐methoxyphenylazo)phenoxy]hexyl methacrylate (MMAzo) and 6‐[4‐(4‐ethoxyphenylazo)phenoxy]hexyl methacrylate (EMAzo), respectively. The 4‐arm star side‐chain LC polymer with p‐methoxyazobenzene moieties exhibits a smectic and a nematic phase, while that with p‐ethoxyazobenzene moieties shows only a nematic phase, which derives of different terminal substituents. The star polymers have similar LC behavior to the corresponding linear homopolymers, whereas transition temperatures decrease slightly. Both star polymers show photoresponsive isomerization under the irradiation with UV–vis light. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3342–3348, 2007     

Synthesis and solution properties of poly(methacrylate)s with semipolar structures on the side chains

Poly{2‐(N,N‐dimethylamino)ethyl methacrylate [poly(DMMA)]}, which was prepared by radical polymerization initiated with dimethyl 2,2‐azobis(2‐methylpropionate), was reacted with hydrogen peroxide, diethyl sulfate, and chloroacetic acid to yield poly[N,N‐dimethyl‐N‐(2‐methacryloyloxyethyl)amine N‐oxide] [poly(DMANO)], poly[N‐ethyl‐N,N‐dimethyl‐N‐(2‐methacryloyloxyethyl)ammonium ethyl sulfate] [poly(EDMES)], and poly[N,N‐dimethyl‐N‐(2‐methacryloyloxy)ethylammonioacetate] [poly(DMEAA)] as ion‐containing water‐soluble polymers, respectively. The solution properties of these charged polymers were compared via the reduced viscosities of these three charged polymers in aqueous solutions as a function of the concentration. Poly(EDMES) showed typical polyelectrolyte behavior, and the other two polymers [poly(DMANO) and poly(DMEAA)] exhibited antipolyelectrolyte behavior. Furthermore, the antipolyelectrolyte behavior was different for poly(DMANO) and poly(DMEAA); that is, poly(DMANO) was less dependent on small electrolytes. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 129–141, 2005