Facile one‐pot synthesis and thermal cyclopolymerization of aryl bistrifluorovinyl ether monomers bearing reactive pendant groups

A diverse pool of aryl bistrifluorovinyl ether (BTFVE) compounds with reactive pendant groups were prepared in a facile, high yielding three step “one‐pot” synthesis from commercial 4‐bromo(trifluorovinyloxy)benzene. Monomers were confirmed from ATR–FTIR, ¹H, ¹³C, and ¹⁹F NMR, and HRMS analysis. Aryl BTFVE compounds were thermally polymerized to afford perfluorocyclobutyl (PFCB) aryl ether polymers with high number–average molecular weight (M_n) for homopolymers (17,050–27,090) and copolymers with 4,4′‐bis(trifluorovinyloxy)biphenyl monomers (27,860–56,500). The PFCB aryl ether homo‐ and copolymers collectively possess high thermal stability (>299 °C in N₂) and are readily solution processable producing optically transparent films. The thermal polymerization was achieved and reactive moieties remained intact, aside from those functionalized with acrylates. In the case with acrylate functionalized polymers, orthogonal polymerization was achieved by first photopolymerizing the acrylates followed by thermal curing of the aryl trifluorovinyl ether endgroups. Preliminary results in this study produced the successful preparation of photodefinable PFCB aryl ether material. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1887–1893, 2010     

Photofabrication of surface relief gratings from azobenzene containing perfluorocyclobutane aryl ether polymer

An azobenzene based perfluorocyclobutane (PFCB) aryl ether polymer, poly[4‐(phenylazo)triphenylamine‐1,2‐hexafluorocyclobutyl ether], was synthesized by using a palladium catalyzed amination reaction and the 2π + 2π cyclodimerization of 4‐[(trifluorovinyl)oxy]bromobenzene. This polymer was designed and synthesized to permit azo chromophores to be incorporated, thus introducing photoinduced dynamic behavior into the PFCB containing polymer structure. The polymer exhibited a T_g of about 122 °C, and the maximum absorption of the azo chromophores was 407 nm in the film state. A thin film was prepared through a spin coating process, and the rapid growth of diffraction efficiency was then achieved by irradiation with an interference beam. The efficient formation of holographic surface relief gratings was also verified from AFM images, which show regularly defined and aligned grating structures. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3525–3532, 2005     

Highly Fluorinated and Crosslinkable Dendritic Polymer for Photonic Applications

Summary: A novel crosslinkable dendritic polymer has been synthesized by the thermal polymerization of peripheral aryl trifluorovinyl ether moieties of a highly fluorinated dendrimer. The resulting perfluorocyclobutane(PFCB)‐containing dendritic polymer exhibited excellent processability, low optical loss (0.36 dB · cm⁻¹ at 1 310 nm with 1% dye doping), high thermal stability, and good solvent resistance for waveguide‐based photonic applications.

Structure of the crosslinkable fluorinated dendrimer synthesized.     

Science and technology of perfluorocyclobutyl aryl ether polymers

This article highlights the preparation of perfluorocyclobutyl (PFCB) aryl ether polymers for a multitude of commercial technologies that are of academic and commercial global interest. In this account, the synthesis of various aryl trifluorovinyl ether (TFVE) monomers tailored for specific applications is discussed. The preparation of PFCB aryl ether polymers and their properties is then presented. Topics of PFCB aryl ether polymers and their applications include photonics, polymer light emitting diodes (PLEDs), proton exchange membranes (PEMs) for fuel cells, atomic oxygen (AO) resistant coatings, and hybrid composites. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5705–5721, 2007     

Resistive switching polymer materials based on poly(aryl ether)s containing triphenylamine and 1,2,4‐triazole moieties

A series of poly(aryl ether)s were successfully prepared via aromatic nucleophilic substitution reaction from various bisphenols and a novel bipolar aryl difluoride monomer containing electron‐donor triphenylamine and electron‐acceptor 1,2,4‐triazole moieties. The poly(aryl ether)s exhibited excellent solubility in organic solvents such as dimethylformamide, chloroform, and tetrahydrofuran at room temperature. The poly(aryl ether)s showed high thermal stability with T_d10 higher than 500 °C and glass transition temperatures (T_g) higher than 187 °C. The thin films of the poly(aryl ether)s indicated bistable resistive switching behavior with ON/OFF current ratios as high as 10³. The switching on and switching off bias voltages of the poly(aryl ether)s were affected by the bisphenol moiety. The good resistive switching behavior of the poly(aryl ether)s made them promising candidates for future nonvolatile memory applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6861–6871, 2008     

A novel fluorine‐containing graft copolymer bearing perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains

A series of novel graft copolymers consisting of perfluorocyclobutyl aryl ether‐based backbone and poly(methyl methacrylate) side chains were synthesized by the combination of thermal [2π + 2π] step‐growth cycloaddition polymerization of aryl bistrifluorovinyl ether monomer and atom transfer radical polymerization (ATRP) of methyl methacrylate. A new aryl bistrifluorovinyl ether monomer, 2‐methyl‐1,4‐bistrifluorovinyloxybenzene, was first synthesized in two steps from commercially available reagents, and this monomer was homopolymerized in diphenyl ether to provide the corresponding perfluorocyclobutyl aryl ether‐based homopolymer with methoxyl end groups. The fluoropolymer was then converted to ATRP macroinitiator by the monobromination of the pendant methyls with N‐bromosuccinimide and benzoyl peroxide. The grafting‐from strategy was finally used to obtain the novel poly(2‐methyl‐1,4‐bistrifluorovinyloxybenzene)‐g‐poly(methyl methacrylate) graft copolymers with relatively narrow molecular weight distributions (M_w/M_n ≤ 1.46) via ATRP of methyl methacrylate at 50 °C in anisole initiated by the Br‐containing macroinitiator using CuBr/dHbpy as catalytic system. These fluorine‐containing graft copolymers can dissolve in most organic solvents. This is the first example of the graft copolymer possessing perfluorocyclobutyl aryl ether‐based backbone. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Hyperbranched poly(ether–urea)s using AB2‐type blocked isocyanate monomer and azide monomer: Synthesis,characterization, reactive end functionalization,and copolymerization with AB monomer

3,5‐bis(4‐aminophenoxy)phenyl phenylcarbamate—a novel AB₂‐type blocked isocyanate monomer and 3,5‐bis{ethyleneoxy(4‐aminophenoxy)}phenyl carbonyl azide—a novel AB₂‐type azide monomer were synthesized in high yield. Step‐growth polymerization of these monomers were found to give a first example of hyperbranched poly (aryl‐ether‐urea) and poly(aryl‐alkyl‐ether‐urea). Molecular weights (M_w) of the polymer were found to vary from 1,858 to 52,432 depending upon the monomer and experimental conditions used. The polydispersity indexes were relatively narrow due to the controlled regeneration of isocyanate functional groups for the polymerization reaction. The degree of branching (DB) was determined using ¹H‐NMR spectroscopy and the values ranged from 87 to 54%. All the polymers underwent two‐stage decomposition and were stable up to 300 °C. Functionalized end‐capping of poly(aryl‐ether‐urea) using phenylchloroformate and di‐t‐butyl dicarbonate (Boc)₂O changed the thermal properties and solubility of the polymers. Copolymerization of AB₂‐type blocked isocyante monomer with functionally similar AB monomer were also carried out. The molecular weights of copolymers were found to be in the order of 6 × 10⁵ with narrow dispersity. It was found that the T_g's of poly(aryl‐alkyl‐ether‐urea)s were significantly less (46–49 °C) compared to poly(aryl‐ether‐urea)s. Moreover the former showed melting transition at 154 °C, which was not observed in the latter case. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2959–2977, 2007     

Poly(aryl ether)s containing o‐terphenyl subunits. II. Random poly(ether sulfone)s

The synthesis of a new A₂X‐type difluoride monomer, N‐2‐pyridyl‐4′,4″‐bis‐(4‐fluorobenzenesulfonyl)‐o‐terphenyl‐3,6‐dimethyl‐4,5‐dicarboxylic imide ( 3 ), is described. The monomer 3 was incorporated into a series of copoly(aryl ether sulfone)s by polymerization of 4,4′‐isopropylidenediphenol and 4,4′‐difluorophenylsulfone. The incorporation of monomer 3 had an observable effect on both the glass‐transition temperature of poly(aryl ether sulfone)s and the tendency for macrocyclic oligomers to form during polymerization. Replacement of the pyridyl imide group via a transimidization reaction with propargyl amine proceeded quantitatively and without polymer degradation. The acetylene containing copoly(aryl ether sulfone) could be crosslinked by simple thermal treatment, resulting in an increase in the glass‐transition temperature and solvent resistance. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 9–17, 2000     

A novel semi-fluorinated graft copolymer containing perfluorocyclobutyl aryl ether-based backbone

The synthesis of a series of novel semi-fluorinated graft copolymers bearing perfluorocyclobutyl (PFCB) aryl ether-based backbone and polystyrene side chains is described. This work initially focused on the synthesis of a trifluorovinyl ether (TFVE) monomer containing a bromine atom, which could be employed as an initiating site for atom transfer radical polymerization (ATRP). Thermal cyclopolymerization of this TFVE monomer provided a macromolecular initiator followed by subsequent initiating ATRP of styrene to afford the desired PFCB aryl ether-based graft copolymers.     

Linear and branched fluoroazo‐benzene chromophores with increased compatibility in semifluorinated polymers

A family of fluorinated azobenzene‐based push‐pull chromophores with one, two, and three trifluorovinyl ether (TFV) groups in linear and branched architecture was synthesized and utilized as active materials in the low optical loss electro‐optic (EO) composites. The fluorinated azobenzene chromophores exhibited increased solubility (30–50 wt %) in semifluorinated polymer host, such as perfluorocyclobutane (PFCB) aromatic ether resin after crosslinking, compared with the commercially available nonfluorinated azobenzene chromophore Disperse Red 1 (1–2 wt %). The impact of this approach on the optical properties on the polymer blends is assessed through optical propagation loss measurements and EO characterization. The resulting fluorinated EO composites showed excellent optical clarity, low birefringence, and low optical loss less than 0.5 dB/cm, while giving EO coefficients of about 3–7 pm/V at 1550 nm. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3166–3177, 2007     

Synthesis and characterization of blue‐light emissive carbazole containing perfluorocyclobutyl arylene ether polymers

A series of N‐alkyl/aryl carbazole 3,6‐substituted arylene trifluorovinyl ether (TFVE) monomers were synthesized in high purity and yield from a concise four‐step synthesis using carbazole as a starting material. Condensate‐free, step‐growth chain extension of the monomers afforded perfluorocyclobutyl (PFCB) arylene ether homo‐ and copolymers as solution processable, optically transparent blue‐light emissive materials. Arylene TFVE monomers and conversion to PFCB arylene ether polymers were structurally elucidated and purity confirmed by high resolution mass spectroscopy, NMR (¹H, ¹³C, and ¹⁹F) spectroscopy, gel permeation chromatography, and attenuated total reflectance Fourier transform infrared analysis. Thermal analysis by differential scanning calorimetry and thermogravimetric analysis revealed glass transition temperatures >150 °C and onset of decomposition in nitrogen >410 °C with 40 wt % char yield up to 900 °C. Optical and electrochemical studies included solution (tetrahydrofuran) and solid state (spin cast thin film) UV–vis/fluorescence spectroscopy and cyclic voltammetry which showed structure dependence of these blue emissive systems on the nature of the N‐alkyl/aryl carbazole substitution in either homo‐ or copolymer configurations. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 552–560     

Synthesis of a triblock copolymer: Poly(ethylene glycol)‐poly(alkylene phosphate)‐poly(ethylene glycol) as a modifier of CaCO3 crystallization

Triblock copolymer poly(ethylene glycol)‐poly(alkylene phosphate)‐poly(ethylene glycol) was prepared by first reacting hexamethylene glycol with dimethyl‐H‐phosphonate at conditions of transesterification and then replacing the CH₃OP(O)(H)O‐… end‐groups by monomethyl ether of poly(ethylene glycol). The course of reaction was studied by ³¹P NMR indicating complete conversion. After oxidation the poly(alkylene H‐phosphonate was converted into the final triblock polyphosphate. This triblock copolymer was used as a modifier of CaCO₃ crystallization. Unusual semi open empty spheres resulted, composed of small crystallites of the size (diameter) equal to 40–90 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 650–657, 2005     

Synthesis and characterization of fluorine‐containing PAA‐b‐PTPFCBPMA amphiphilic block copolymer

A series of perfluorocyclobutyl (PFCB) aryl ether‐based amphiphilic diblock copolymers containing hydrophilic poly(acrylic acid) (PAA) and fluorophilic poly(p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate) segments were synthesized via successive atom transfer radical polymerization (ATRP). 2‐MBP‐initiated and CuBr/N,N,N′,N′,N″‐pentamethyldiethylenetriamine‐catalyzed ATRP homopolymerization of the PFCB‐containing methacrylate monomer, p‐(2‐(p‐tolyloxy)perfluorocyclobutoxy)phenyl methacrylate, can be performed in a controlled mode as confirmed by the fact that the number‐average molecular weights (M_n) increased linearly with the conversions of the monomer while the polydispersity indices kept below 1.38. The block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.36) were synthesized by ATRP using Br‐end‐functionalized poly(tert‐butyl acrylate) (PtBA) as macroinitiator followed by the acidolysis of hydrophobic PtBA block into hydrophilic PAA segment. The critical micelle concentrations of the amphiphilic diblock copolymers in different surroundings were determined by fluorescence spectroscopy using N‐phenyl‐1‐naphthylamine as probe. The morphology and size of the micelles were investigated by transmission electron microscopy and dynamic laser light scattering, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

The effect of crosslinking on thermal and mechanical properties of perfluorocyclobutane aromatic ether polymers

As the minimum features in semiconductor devices decrease, it is a new trend to incorporate copper and polymers with dielectric constant less than 3.0 to enhance the performance of the devices. Two fluorinated polymers, poly(biphenyl perfluorocyclobutyl ether) (BPFCB) and poly(1,1,1-triphenyl ethane perfluorocyclobutyl ether) (PFCB), are newly developed polymers with dielectric constants below 3.0. These two polymers have a similar backbone structure, but PFCB has the capability of crosslinking. To know the implications of these two polymers in the semiconductor industry, properties that are important for the integral reliability of Integral Circuits (IC), such as thermal and mechanical properties, should be understood. This comparative study shows that the crosslinking in perfluorocyclobutane aromatic ether polymer can reduce vertical thermal expansion and increase glass transition temperature (T_g) while water absorption, crystalline-like phase, and dielectric constant are slightly increased. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1383–1392, 1998     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Perfluorocyclobutane aromatic ether polymers

Novel polymers containing alternating perfluorocyclobutane and aromatic ether subunits are prepared from aryl poly(trifluorovinyl ether) monomers via the thermal [2π + 2π] dimerization of the trifluorovinyl ether functionality. A model study is described, which probes the nature of the perfluorocyclobutane rings formed during the polymerization reaction. The bifunctional monomer 4,4′-bis(trifluorovinyloxy) biphenyl and the trifunctional monomer 1,1,1-tris(4-trifluorovinyloxyphenyl)ethane are prepared and polymerized to provide thermoplastic and thermoset polymers, respectively. Characterization of the mechanical and dielectric properties of these new polymers is presented. © 1993 John Wiley & Sons, Inc.     

Synthesis and characterization of new hyperbranched poly(aryl ether oxadiazole)s

A new AB₂ monomer was synthesized for use in the preparation of a hyperbranched poly(aryl ether oxadiazole) with terminal phenol functionality. The AB₂ monomer contains two phenolic groups and a single aryl fluoride group that is activated toward nucleophilic displacement by the attached oxadiazole ring. The nucleophilic substitution of the fluoride with the phenolate groups led to the formation of an ether linkage. Subsequently, a hyperbranched poly(aryl ether oxadiazole) having approximately a 44% degree of branching, as determined by a combination of model compound studies and ¹H NMR, was obtained. The terminal phenolic groups underwent facile functionalization, furnishing hyperbranched polymers with a variety of functional chain ends. The nature of the chain‐end groups had a significant influence on the physical properties of the polymers, such as the glass‐transition temperature and their solubility. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3851–3860, 2001     

Living cationic polymerization of vinyl ether with a cyclic acetal group

The living cationic polymerization of 5‐ethyl‐2‐methyl‐5‐(vinyloxymethyl)‐1,3‐dioxane ( 1 ), a vinyl ether with a cyclic acetal unit, was investigated with various initiating systems in toluene or methylene chloride at 0 to ?30 °C. With initiating systems such as hydrogen chloride (HCl)/zinc chloride (ZnCl₂), isobutyl vinyl ether–acetic acid adduct [CH₃CH(OiBu)OCOCH₃]/tin tetrabromide (SnBr₄)/di‐tert‐butylpyridine (DTBP), and CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride (Et_1.5AlCl_1.5)/ethyl acetate (CH₃COOEt), the number‐average molecular weights (M_n's) of the obtained poly( 1 )s increased in direct proportion to the monomer conversion and produced polymers with relatively narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.2–1.3]. To investigate the living nature of the polymerization with CH₃CH(OiBu)OCOCH₃/SnBr₄/DTBP, a second monomer feed was added to the almost polymerized reaction mixture. The added monomer was completely consumed, and the M_n values of the polymers showed a direct increase against the conversion of the added monomer, indicating the formation of a long‐lived propagating species. The glass transition temperature and thermal decomposition temperature of poly( 1 ) (e.g., M_n = 13,600, M_w/M_n = 1.30) were 29 and 308 °C, respectively. The cyclic acetal group in the pendants of the polymer of 1 could be converted to the corresponding two hydroxy groups in a 65% yield by an acid‐catalyzed hydrolysis reaction. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4855–4866, 2007     

Kinetic study of semifluorinated arylene vinylene ether polymers

Fluorinated arylene vinylene ether (FAVE) polymers were prepared from the base‐promoted addition of commercial 2,2‐bis(4‐hydroxyphenyl)hexafluoropropane (6F bisphenol A) to aryl trifluorovinyl ether (TFVE), 2,2′‐bis(4‐trifluorovinyloxybiphenyl)‐1,1,1,3,3,3‐hexafluoropropane. The step‐growth polymerization kinetics by using stoichiometric NaH and catalytic Cs₂CO₃ were investigated by monitoring the ¹⁹F NMR signals of the aryl TFVEs. The nth order kinetic model was used to determine rate constants over a series of programmed temperatures. Polymerization using stoichiometric NaH resulted in second‐order kinetics with an activation energy of 59 kJ/mol. This model kinetic study provided insight into the mechanistic pathways of the FAVE polymer system that has recently shown a lot of interest in many areas of materials science. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Polymerization of novel trifluorovinyl ethers: Insight into the mechanisms of termination and chain transfer

New trifluorovinyl ether polymers were synthesized with the view toward overcoming the high chemical and thermal stabilities commonly associated with fluoropolymers. Trifluorovinyl ether copolymers, with fluorinated pendant groups, have previously been prepared to overcome limitations in processibility. To further enhance solubility in common organic solvents and to improve processibility, we prepared three new trifluorovinyl ether monomers, having hydrocarbon ether pendant groups, for polymerization: 1-[2-(2-ethoxy ethoxy)ethoxy]-1,2,2-trifluoroethene (Et-TFVE), 1-[2-(2-t-butoxy ethoxy)ethoxy]-1,2,2-trifluoroethene (t-Bu-TFVE), and 1-(2-phenoxy ethoxy)-1,2,2-trifluoroethene (Ph-TFVE). Homopolymers of these three monomers were prepared by aqueous emulsion polymerization with the use of a redox initiator. Poly(Et-TFVE) and poly(Ph-TFVE) were prepared with a range of molar masses, the highest of which had weight average molar masses of 33,800 g mol⁻¹ and 59,000 g mol⁻¹, respectively. As a result of monomer reactivity and structure, the polymerization mechanism was complicated, resulting in β-scission termination/chain transfer for all three polymers and hydrogen abstraction chain transfer for poly(Et-TFVE) and poly(t-Bu-TFVE). To the best of our knowledge, this is the first example of hydrogen abstraction from the pendant group of the trifluorovinyl ether itself. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3301–3308, 1999