Synthesis and crosslinking reaction of poly(thiourethane)s having a siloxane moiety in the side chain

Poly(thiourethane)s having a siloxane moiety in the side chain were synthesized with a 5‐membered cyclic dithiocarbonate (DTC) having a siloxane group as a building block. The synthetic pathway consisted of (1) an addition reaction of the DTC with diamines and (2) polyaddition reactions of the resulting dithiols with diisocyanates. The siloxane moiety in the polymer side chain underwent a self‐condensation reaction upon exposure to moisture, and this led to a successful crosslinking reaction of the poly(thiourethane). The crosslinking on a silicate surface was accompanied by condensation between the siloxane side chain of the polymer and the silanol group on the surface, giving the corresponding surface that was permanently coated with the crosslinked polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6492–6502, 2005     

Synthesis and properties of poly(thiourethane)s having soft oligoether segments

Polyaddition of bis(five‐membered cyclic dithiocarbonate), 2,2‐bis[4‐(1,3‐thioxolane‐2‐one‐4‐yl‐methoxy)phenyl]propane ( 1 ), with diamines having soft oligoether segments and property of the obtained poly(thiourethane)s were examined. Treatment of 1 with equivalent diamines in tetrahydrofuran at room temperature gave poly(thiourethane)s having a mercapto group in each unit, which were further treated with acetic anhydride and triethylamine to give the corresponding S‐acetylated poly(thiourethane)s in high yield. Exposing the mercapto group containing poly(thiourethane)s to benzoyl chloride and triethylamine provided the corresponding S‐benzoylated poly(thiourethane)s effectively. Thermal properties of the obtained polymers were evaluated by thermogravimetric analysis and differential scanning calorimetry. The obtained polymers showed 10 wt % loss temperature (T_d10) in the range from 230 to 274 °C, which was relatively high when compared with the T_d10 of an analogous polymer prepared from 1 and 1,6‐hexamethylenediamine. The polymers obtained here exhibited glass transition temperature (T_g) in the range from ?16 °C to 40 °C, which was much lower than the analogous polymer described above, probably due to the soft oligoether segments. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1076–1081     

Crosslinkable polyurethane bearing a methacrylate structure in the side chain

A polyurethane bearing methacrylate groups through urethane linkages was prepared by the addition of 2‐methacryloyloxyethyl isocyanate to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate at an ambient temperature, whereas a crosslinked product was obtained from the reaction at 60 °C. The resulting linear polyurethane, bearing a methacrylate structure, was thermally crosslinkable. Its radical copolymerization with vinyl‐type monomers afforded the corresponding crosslinked polymers, whose low glass transition temperatures suggested the flexibility of the polymer chains in the crosslinked product. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3400–3407, 2007     

Synthesis of well‐defined three‐armed polystyrene having thiourethane–isocyanurate as the core structure derived from trifunctional five‐membered cyclic dithiocarbonate

The synthesis of a three‐armed polymer with an isocyanurate–thiourethane core structure is described. Monofunctional reversible addition–fragmentation chain transfer (RAFT) agent 2 and trifunctional RAFT agent 5 were prepared from mercapto‐thiourethane and tris(mercapto‐thiourethane), which were obtained from the aminolysis of mono‐ and trifunctional five‐membered cyclic dithiocarbonates, respectively. The radical polymerization of styrene in the presence of 2,2′‐azobis(isobutyronitrile) and RAFT agent 2 in bulk at 60 °C proceeded in a controlled fashion to afford the corresponding polystyrene with desired molecular weights (number‐average molecular weight = 3000–10,100) and narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.13). On the basis of the successful results with the monofunctional RAFT agents, three‐armed polystyrene with thiourethane–isocyanurate as the core structure could be obtained with trifunctional RAFT agent 5 in a similar manner. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5498–5505, 2005     

Synthesis and crosslinking reaction of poly(hydroxyurethane) bearing a secondary amine structure in the main chain

This article describes the polyaddition of bifunctional five‐membered cyclic carbonates and diethylenetriamine. The polyaddition proceeded via the selective addition of the primary amino group to the cyclic carbonates to give poly(hydroxyurethane)s bearing a secondary amine structure in the main chain. The resulting poly (hydroxyurethane) having a secondary amine structure was crosslinked by a reaction with a bifunctional dithiocarbonate to give a networked poly(hydroxyurethane–mercaptothiourethane). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5899–5905, 2005     

Addition of five‐membered cyclic carbonate with amine and its application to polymer synthesis

A bifunctional five‐membered cyclic carbonate was synthesized from carbon dioxide and diglycidyl terephthalate, and its polyaddition with alkyl diamines were carried out in DMF at room temperature to obtain the corresponding poly(hydroxyurethane)s with M_n s in the range of 6300–13200 in good yields. The structures of the obtained polymers were confirmed by IR and NMR spectroscopy and their glass‐transition and decomposition temperatures were observed at 3–29 °C and 182–277 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2375–2380, 2000     

Mild incorporation of CO2 into epoxides: Application to nonisocyanate synthesis of poly(hydroxyurethane) containing triazole segment by polyaddition of novel bifunctional five‐membered cyclic carbonate and diamines

The cyclic amidinium iodide effectively catalyzed the ring‐expansion addition of epoxides with carbon dioxide under ordinary pressure and mild conditions to obtain the corresponding five‐membered cyclic carbonates in high yield. The novel triazole‐linked bifunctional five‐membered cyclic carbonate was synthesized successfully by the click reaction of the azide‐ and the alkyne‐substituted five‐membered cyclic carbonates under ambient temperature in high yield. The chemical structure of the novel bis(cyclic carbonate) was characterized by one‐ and two‐dimensional nuclear magnetic resonance spectra. The obtained bis(cyclic carbonate) was converted with commercially available diamines to poly(hydroxyurethane) containing triazole segment without catalyst in high yield. Analyses of the resulting poly(hydroxyurethane)s were performed by proton nuclear magnetic resonance, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 986–993     

Synthesis and properties of poly(hydroxyurethane)s

Bis(cyclic Carbonate)s 1 were prepared by the reaction of bis(epoxide)s and atmospheric pressure of CO₂ in the presence of sodium iodide and triphenylphosphine as catalysts at 100°C in high yield. Polyaddition of 1 and hexamethylenediamine ( 2a ) or dodecamethylenediamine ( 2b ) in dimethylsulfoxide or N,N-dimethylacetamide (DMAc) at 70 or 100°C for 24 h afforded corresponding poly(hydroxyurethane)s with M?_n 20,000–30,000. When ethylenediamine ( 2c ) or 1,3-propanediamine ( 2d ) was used as a diamine, poly(hydroxyurethane)s with lower molecular weight were obtained. The presence of water, methanol, or ethyl acetate in the solvent had little effect on the M?_n of the polymer obtained, because of the high chemoselectivity of the reaction of the five-membered cyclic carbonate and amine. Polyaddition of bis(cyclic carbonate) bearing ester groups and 2a also afforded the corresponding poly(hydroxyurethane) without aminolysis of the ester groups. Poly(hydroxyurethane) 3 obtained from the bis(cyclic carbonate) derived from bisphenol A was less soluble in organic solvents than model polyurethane 8 having no hydroxy groups obtained from 4,4′-isopropylidenebis(2-hydroxyethoxybenzene) and hexamethylene diisocyanate, and was thermally stable as well as 8.3 easily undertook crosslinking at room temperature by the treatment with hexamethylene diisocyanate or aluminium triisopropoxide in DMAc or tetrahydrofuran. The gel crosslinked by aluminium triisopropoxide regenerated the original polymer at room temperature by treatment with 1.5 equiv of 1.2M HCl in N-methylpyrollidinone for 1 h. © 1993 John Wiley & Sons, Inc.     

Crosslinkable poly(p‐phenylenevinylene) derivative

To simplify the fabrication of multilayer light‐emitting diodes, we prepared a p‐phenylenevinylene‐based polymer capped with crosslinkable styrene through a Wittig reaction. Insoluble poly(p‐phenylenevinylene) derivative (PPVD) films were prepared by a thermal treatment. The photoluminescence and ultraviolet–visible (UV–vis) absorbance of crosslinked films and noncrosslinked films were studied. We also studied the solvent resistance of crosslinked PPV films with UV–vis absorption spectra and atomic force microscopy. Double‐layer devices using crosslinked PPVD as an emitting layer, 2‐(4‐tert‐butylphenyl)‐5‐phenyl‐1,3,4‐oxadiazole (PBD) in poly(methyl methacrylate) as an electron‐transporting layer, and calcium as a cathode were fabricated. A maximum luminance efficiency of 0.70 cd/A and a maximum brightness of 740 cd/m² at 16 V were demonstrated. A 12‐fold improvement in the luminance efficiency with respect to that of single‐layer devices was realized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2124–2129, 2004     

Photocrosslinking system using multifunctional epoxy crosslinkers having thermally degradable properties

A novel thermally degradable photocrosslinking system was investigated. Difunctional and trifunctional epoxides with tertiary ester linkages were synthesized. When blended films of epoxides and poly(vinyl phenol) or epoxides and poly(methacrylic acid‐co‐ethyl methacrylate) with a photoacid generator were irradiated and then baked at relatively low temperatures (<100 °C), the films became insoluble in solvents. The heating conditions strongly affected the insoluble fractions of the blends. The insoluble fractions of the blended films containing the trifunctional epoxide were higher than the fractions of the films containing the difunctional epoxide. The crosslinked films became soluble after baking at relatively high temperatures (>120 °C). The reaction pathway of the blended system was studied with in situ Fourier transform infrared measurements. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3685–3696, 2004     

Synthesis of reactive poly(norbornene): Ring‐opening metathesis polymerization of norbornene monomer bearing cyclic dithiocarbonate moiety

A norbornene monomer bearing cyclic dithiocarbonate moiety (NB‐DTC) was successfully synthesized from the corresponding precursor having epoxy moiety by its reaction with carbon disulfide. NB‐DTC underwent the ring‐opening metathesis polymerization (ROMP) catalyzed by a ruthenium carbene complex to give the corresponding poly(norbornene). The dithiocarbonate moiety incorporated into the side chain of the obtained poly(norbornene) reacted with amine to afford the corresponding thiourethane moiety with thiol group, which underwent oxidative S‐S coupling and/or addition reaction to the C‐C double bond in the main chain, leading to formation of a cross‐linked polymer. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

Synthesis of polymer microspheres functionalized with chiral ligand by precipitation polymerization and their application to asymmetric transfer hydrogenation

Monodisperse, crosslinked poly(divinylbenzene) and poly(methacrylic acid‐co‐ethylene glycol dimethacrylate) microspheres with (1R,2R)‐N¹‐toluenesulfonyl‐1,2‐diphenylethylene‐1,2‐diamine ((R,R)‐TsDPEN) moiety were successfully prepared by precipitation polymerization. Introduction site of the (R,R)‐TsDPEN moiety into the polymer microspheres could be controlled by changing the order of addition of the corresponding monomers. The functionalized polymer microspheres were applied to asymmetric transfer hydrogenation of ketone and imine. Polymer microsphere‐supported chiral catalysts showed good reactivity and enantioselectivity in the catalytic asymmetric transfer hydrogenations. Chiral secondary alcohol was quantitatively obtained with 94% ee in the asymmetric transfer hydrogenation of acetophenone in water. We also found that introduction site of the chiral catalyst and hydrophobicity of the microspheres, as well as degree of the crosslinking, affected the yield and enantioselectivity of chiral product in this reaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3340–3349, 2010     

Synthesis and chemical modification of hyperbranched polyethers with terminal hydroxy groups by the anionic ring‐opening polymerization of 3‐alkyl‐3‐hydroxymethyl oxetanes

The anionic ring‐opening polymerization of oxetanes containing hydroxyl groups was carried out with potassium tert‐butoxide as an initiator in the presence of 18‐crown‐6‐ether in N‐methylpyrrolidinone at 180 °C; it yielded corresponding multifunctional hyperbranched polymers: poly(3‐ethyl‐3‐hydroxymethyloxetane)s, with number‐average molecular weights of 2200–4100 in 83–95% yields, and poly(3‐methyl‐3‐hydroxymethyloxetane)s, with number‐average molecular weights of 4600–5200 in 70–95% yields. The synthesized poly(3‐ethyl‐3‐hydroxymethyloxetane)s and poly(3‐methyl‐3‐hydroxymethyloxetane)s were hyperbranched polyethers containing an oxetane moiety and many hydroxy groups at the ends. The postpolymerization of poly(3‐ethyl‐3‐hydroxymethyloxetane)s was performed in the presence of potassium tert‐butoxide and 18‐crown‐6‐ether in N‐methylpyrrolidinone at 180 °C; it yielded corresponding polymers with higher molecular weights in good yields. The cationic polymerization of poly(3‐ethyl‐3‐hydroxymethyloxetane) derivatives was carried out with boron trifluoride etherate as an initiator and was followed by alkaline hydrolysis; this yielded a new branched polymer, a poly(hyperbranched polyether), with many pendant hydroxy groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3739–3750, 2004     

Novel siloxane‐carrying dithiol derived from 5‐membered cyclic dithiocarbonate and its curing reactions for coating application

A new efficient and straightforward method to convert amines into siloxane‐thiol hybrid molecules was developed. The method relies on the nucleophilic addition of amines to a cyclic dithiocarbonate having siloxane moiety (DTC‐Si), and the successive ring‐opening reaction of the dithiocarbonate moiety to give the corresponding acyclic thiourethane having a thiol moiety. Based on this method, amine‐terminated poly(propylene glycol) was successfully transformed into the corresponding polyether having thiol‐terminals and siloxane groups. In the presence of moisture, the alkoxysilyl moiety underwent condensation reaction to make the polyether cured into a transparent resin having solvent‐resistance. Addition of bisphenol A diglycidyl ether (Bis A‐DGE) to the curing process resulted in two simultaneous reactions, i.e., (1) condensation of siloxane part and (2) addition reaction of the thiol terminal and the epoxide group. When this curing process was carried out on a glass surface, the siloxane part reacted with silanol group on the surface, forming a coating layer having excellent mechanical toughness graded as maximum 7H by pencil toughness test (JIS‐K5400). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5119–5126, 2005     

Synthesis of novel core‐crosslinked graft copolymers from crosslinked poly(mercapto‐thiourethane)

Crosslinked poly(mercapto‐thiourethane) was employed as a precursor for graft copolymer synthesis. The crosslinked stem polymer ( 1 ) was easily prepared by polyaddition of a bifunctional dithiocarbonate and piperazine under air atmosphere via oxidative coupling of mercapto group. Polymerization of styrene and methyl methacrylate in the presence of 1 yielded the corresponding crosslinked graft copolymers with high grafting weight percentages (>1800%). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5097–5102, 2005     

Star‐shaped cyclopolymers: A new category of star polymer with rigid cyclized arms prepared by controlled cationic cyclopolymerization and subsequent microgel formation of divinyl ethers

The combination of living/controlled cationic cyclopolymerization and crosslinking polymerization of bifunctional vinyl ethers (divinyl ethers) was applied to the synthesis of core‐crosslinked star‐shaped polymers with rigid cyclized arms. Cyclopolymerization of 4,4‐bis(vinyloxymethyl)cyclohexene ( 1 ), a divinyl ether with a cyclohexene group, was investigated with the hydrogen chloride/zinc chloride (HCl/ZnCl₂) initiating system in toluene at 0 °C. The reaction proceeded quantitatively to give soluble poly( 1 )s in organic solvents. The content of the unreacted vinyl groups in the produced polymers was less than ～3 mol%, and therefore, the degree of cyclization of the polymers was determined to be ～97%. The number‐average molecular weight (M_n) of the polymers increased in direct proportion to monomer conversion and further increased on addition of a fresh monomer feed to the almost completely polymerized reaction mixture, indicating that living cyclopolymerization of 1 occurred. The chain linking reactions among the formed living cyclopolymers with 1,4‐bis(vinyloxy)cyclohexane ( 3 ) as a crosslinker in toluene at 0 °C produced core‐crosslinked star‐shaped cyclopoly( 1 )s [star‐poly( 1 )s] in high yield (100%). Dihydroxylation of the cyclohexene double bonds of star‐poly( 1 ) gave hydrophilic water‐soluble star‐shaped polymers with rigid arm structure [star‐poly( 1 )‐OH] with thermo‐responsive function in water. T_gs of star‐poly( 1 ) and star‐poly( 1 )‐OH were 135 °C and 216 °C, respectively; these values are very high as vinyl ether‐based star‐shaped polymers. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1094–1102     

Synthesis of siloxane‐crosslinked polysilylenemethylenes by chlorodephenylation

Thermally stable polysilylenemethylenes (PSMs) with siloxane crosslinking moieties were successfully synthesized by chlorodephenylation of preformed poly(methylphenylsilylenemethylene) (PMPSM) and subsequent in situ alcoholysis/hydrolysis/condensation reactions. The simplified process and mild reaction conditions are quite advantageous. The crosslink density of these materials can be adjusted by the degree of chlorodephenylation, although an alkoxysilyl group remains to some extent. The resulting crosslinked PSMs have well defined structures in which the backbone is composed of MePhSiCH₂ and Me(MeO)SiCH₂ as well as Me(O_1/2)SiCH₂ as a crosslinking moiety. The resulting crosslinked PSMs exhibited glass‐transition temperatures ranging from 15 to 20 °C, whereas that of linear PMPSM was 22 °C. The crosslinked PSMs remained unchanged in weight below 300 °C, suggesting that they are thermally stable up to that temperature. The good solvent resistance caused by crosslinking as well as high thermal stability of these materials allow us to design new PSM‐based polymer blends and preceramic polymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 416–422, 2002     

Free‐radical crosslinking copolymerization of 2,2′‐azobis[N‐(2‐propenyl)‐2‐methylpropionamide] with vinyl benzoate resulting in polymeric azo initiators

2,2′‐Azobis[N‐(2‐propenyl)‐2‐methylpropionamide] (APMPA) with two carbon–carbon double bonds and an azo group was copolymerized with vinyl benzoate (VBz) at 60 °C, resulting in azo groups containing VBz/APMPA prepolymers and crosslinked polymers as soluble and insoluble polymeric azo initiators, respectively. The polymerization characteristics of APMPA as a novel diallyl monomer were clarified with the rate and degree of polymerization and the monomer reactivity ratios. The gelation behaviors in VBz/APMPA crosslinking copolymerizations were examined in detail with a comparison of the actual gel point and the theoretical gel point calculated according to Stockmayer's equation with the tentative assumption of equal reactivity for both vinyl groups belonging to VBz and APMPA. The effectiveness of the resulting branched or crosslinked poly(VBz‐co‐APMPA)s as soluble or insoluble polymeric azo initiators, respectively, at providing graft polymers through the cleavage of azo groups at an elevated temperature was examined by the polymerization of allyl benzoate at 120 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 317–325, 2002     

Crosslinkable poly(propylene carbonate): High‐yield synthesis and performance improvement

A crosslinking strategy was used to improve the thermal and mechanical performance of poly(propylene carbonate) (PPC): PPC bearing a small moiety of pendant C?C groups was synthesized by the terpolymerization of allyl glycidyl ether (AGE), propylene oxide (PO), and carbon dioxide (CO₂). Almost no yield loss was found in comparison with that of the PO and CO₂ copolymer when the concentration of AGE units in the terpolymer was less than 5 mol %. Once subjected to UV‐radiation crosslinking, the crosslinked PPC film showed an elastic modulus 1 order of magnitude higher than that of the uncrosslinked one. Moreover, crosslinked PPC showed hot‐set elongation at 65 °C of 17.2% and permanent deformation approaching 0, whereas they were 35.3 and 17.2% for uncrosslinked PPC, respectively. Therefore, the PPC application window was enlarged to a higher temperature zone by the crosslinking strategy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5329–5336, 2006     

Synthesis and properties of polyurethanes bearing urethane moieties in the side chain

Polyurethanes bearing urethane groups in the side chains were prepared by the addition of isocyanates to the hydroxyl groups in poly(hydroxyurethane) prepared by the polyaddition of a bifunctional cyclic carbonate with 1,12‐diaminododecane. The urethanization proceeded quantitatively in the presence of a catalytic amount of di‐n‐butyltin dilaurate. The resulting polyurethane had a higher glass transition temperature than the original poly(hydroxyurethane), although its esterified product had a lower glass transition temperature. The urethanization with 3‐(triethoxysilyl)propyl isocyanate also proceeded effectively to afford both soluble and insoluble polymers, depending on the reaction conditions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3408–3414, 2007