Poly(p‐phenylenevinylene) presenting pendent pentaphenylene dendron groups for light‐emitting diodes

We have synthesized, using the Gilch method, a novel poly(p‐phenylenevinylene) derivative (PPV‐PP) containing two pendent pentaphenylene dendritic wedges, and have characterized its structure and properties. The incorporated side chain pentaphenylene dendrons serve as solubilizing groups, prevent π‐stacking interactions from occurring between the polymer main chains, and suppress the formation of excimers in the solid state. Photoluminescence studies indicate that efficient intramolecular energy transfer occurred from the photoexcited pentaphenylene groups to the poly(p‐phenylenevinylene) backbone. The polymer film exhibits a maximum emission at 510 nm and had a photoluminescence efficiency of 46%, which is similar to that measured in dilute solution. The photoluminescence spectra remained almost unchanged after thermal annealing at 150 °C for 20 h, and displayed inhibited excimer formation. Polymer light‐emitting diodes that we fabricated in the configuration ITO/PEDOT/PPV‐PP/Mg:Ag/Ag exhibited a maximum emission peak at 513 nm, corresponding to the green region [x = 0.30 and y = 0.62 in the Commission Internationale de L'Eclairage (CIE) chromaticity coordinates]. The maximum brightness and maximum luminance efficiency were 1562 cd/m² and 1.93 cd/A, respectively. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5147–5155, 2005     

低代数聚丙烯亚胺树形分子的改性与表征

通过改进反应条件制得了低代数（1.0代）聚丙烯亚胺树形分子,并对其进行端基修饰,得到聚丙烯亚胺树形偶氮化合物。该化合物可能由于具有独特的光学性质而应用于全息材料。合成产物用元素分析、IR和^1H NMR表征,结果与理论结构相符合。     

Silicone‐urethane membranes for lithium batteries. Part 1. Moisture‐cured poly(siloxane‐urethane‐urea) elastomers containing polyethylene oxide (PEO) segments – synthesis and characterization as potential membrane materials

Poly(siloxane‐urethane‐urea) elastomers containing both polysiloxane and polyethylene oxide (PEO) segments in the polymer chain were obtained by moisture‐curing of NCO‐terminated poly(siloxane‐urethane) prepolymers synthesized from isophorone diisocyanate and mixtures of polyoxyethylene diols and polysiloxane diols with various molecular weights. Mechanical properties of the moisture‐cured films and their swelling ability in solvent mixtures commonly used in lithium batteries were investigated, and it was found that they were greatly influenced by PEO content in the polymer. PEO content in the polymer was also found to affect very much the electric conductivity of the films after immersion in lithium salt solution in ethylene carbonate–dimethyl carbonate solvent mixture. At high contents of PEO in the polymer chain specific conductivities of the films in a range of 10^?3, Scm^?1 could be achieved at room temperature. Based on the results of Scanning Electron Microscopy with X‐ray Analysis (SEM/EDS) investigations and wide‐angle X‐ray scattering and small‐angle X‐ray scattering studies, it could be anticipated that the reason for good conductivity of the films might be their specific supramolecular structure that potentially facilitated lithium ion mobility. Copyright © 2015 John Wiley & Sons, Ltd.     

Structure and rheology of hyperbranched and dendritic polymers. II. Effects of blending acetylated and hydroxy‐terminated poly(propyleneimine) dendrimers with aqueous poly(ethylene oxide) solutions

The effect of adding acetylated poly(propyleneimine) dendrimers to the structure and rheology of aqueous solutions of high molecular weight poly(ethylene oxide) (PEO) was investigated by rheology and small‐angle neutron scattering in a temperature range of 10–40 °C. In the semidilute regime, the steady shear rheology of PEO solutions was unmodified by the addition of dendrimers at a comparable weight concentration. At the highest concentrations studied, the addition of acetylated dendrimers suppressed the onset of a low‐frequency elastic modulus at the lowest temperature investigated. For comparison, the addition of PEO of a comparable molecular weight at the same weight fraction resulted in a milder suppression but, unlike the dendrimers, greatly increased the solution viscosity. The addition of acetylated dendrimers to a semidilute PEO solution at 10 °C substantially reduced the solution turbidity. These effects on the rheology and optical properties were confirmed by small‐angle neutron scattering measurements of the molecular structure of the mixture. Additional SANS measurements in the dilute regime (0.1 wt % PEO) showed quantitatively that the dendrimers decorated the PEO chains in a necklace structure, such as that observed previously for micelles. The results suggested a mechanism of rheology modification whereby the dendrimers disrupted the association network structure in the PEO solution at lower temperatures by preferentially associating with the PEO chains in solution. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 874–882, 2000     

Synthesis of spherical and hemispherical sugar‐containing poly(ornithine) dendrimers

A novel sugar‐containing poly(ornithine) dendrimer is synthesized for possible antigen delivery and related applications. The dendrimer contains an ornithine dendron as interior scaffolding and oligosaccharides on the periphery, which provide an attachment site for a peptide antigen. Maltose or lactose is bound to both hemispherical and spherical poly(ornithine) dendrimer generation 3 (G3) by reductive amination between its reducing end and the peripheral amino group of the dendrimer using a borane‐pyridine complex in a buffer solution at 50 °C. The degree of substitution of sugar is changed by varying the molar ratio of sugar to dendrimer. When the surface of spherical poly(ornithine) dendrimer G3 is modified by binding β‐alanine to the 16 amino groups, highly substituted maltose‐ or lactose‐β‐alanine‐poly(ornithine) dendrimer G3 is obtained in high yield after 7 days of reaction. The structures of these sugar‐containing dendrimers are characterized by NMR and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry analyses. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1400–1414, 2004     

Surface segregation of highly branched polymer additives in linear hosts

Entropy‐driven segregation of various branched and hyperbranched polymeric additives in chemically similar linear polymer hosts is studied using self‐consistent (SCF) mean‐field lattice simulations. The simulations account for the effect of molecular architecture on local configurational entropy in the blends, but ignores the effect of architecture on local density and blend compressibility. Star, dendrimer, and comb‐like additives are all found to be enriched at the surface of chemically identical linear host polymers. The magnitude of their surface excess increases with increased number of chain ends and decreases with increased segmental crowding near the branch point. Provided the number of arms and molecular weight of the branched additives are maintained constant, we find that the simplest branched architecture, the symmetric star, exhibits the strongest preference for the surface of binary polymer blends. We show that a single variable, here termed the “entropic driving force density,” controls the relative surface affinities of branched additives possessing a wide range of architectures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1788–1801, 2008     

Synthesis and Characterization of Dendrimer‐Encapsulated Bimetallic Core‐Shell PdPt Nanoparticles

Using a successive method, PAMAM dendrimer‐encapsulated bimetallic PdPt nanoparticles have been successfully prepared with core‐shell structures (Pd@Pt DENs). Evidenced by UV‐vis spectra, high resolution transmission electron microscopy, and X‐ray energy dispersive spectroscopy (EDS), the obtained Pd@Pt DENs are monodispersed and located inside the cavity of dendrimers, and they show a different structure from monometallic Pt or Pd and alloy PdPt DENs. The core‐shell structure of Pd@Pt DENs is further confirmed by infrared measurements with carbon monoxide (IR‐CO) probe. In order to prepare Pd@Pt DENs, a required Pd/Pt ratio of 1:2 is determined for the Pt shell to cover the Pd core completely. Finally, a mechanism for the formation of Pd@Pt DENs is proposed.     

Selective Localization and Migration of Multiwalled Carbon Nanotubes in Blends of Polycarbonate and Poly(styrene‐acrylonitrile)

Multiwalled carbon nanotubes (MWNTs) have been introduced into blends of polycarbonate (PC) and poly(styrene‐acrylonitrile) (SAN) by melt mixing in a microcompounder. Co‐continuous blends are prepared by either pre‐compounding low amounts of nanotubes into PC or SAN or by mixing all three components together. Interestingly, in all blends, regardless of the way of introducing the nanotubes, the MWNTs were exclusively located within the PC phase, which resulted in much lower electrical resistivities as compared to PC or SAN composites with the same MWNT content. The migration of MWNTs from the SAN phase into the PC phase during common mixing is explained by interfacial effects.

     

Preparation and Properties of New Soluble π‐Conjugated Polymers Containing a Fumaronitrile Unit in the Main Chain

Summary: A class of new, soluble, π‐conjugated polymers containing a fumaronitrile unit in the main chain were synthesized by the reaction between di(4‐bromophenyl)fumaronitrile and bis(2,2‐dimethylpropane‐1,3‐diyl)‐1,4‐dialkoxyphenylene‐2,5‐diborate employing palladium catalysts. All the polymers were photoluminescent and electrochemically active.

The new soluble π‐conjugated polymers 1a – d with photoluminescence and electrochemical activity synthesized here.     

Sequential functionalization of janus‐type dendrimer‐like poly(ethylene oxide)s with camptothecin and folic acid

Janus‐type dendrimer‐like poly(ethylene oxide)s (PEOs) of 1st, 2nd, and 3rd generation carrying terminal hydroxyl functions on one side and cleavable ketal groups on the other were used as substrates to conjugate folic acid as a folate receptor and camptothecin (CPT) as a therapeutic drug in a sequential fashion. The conjugation of both FA and CPT was accomplished by “click chemistry” based on the 1,3 dipolar cycloaddition coupling reaction. First, the hydroxyl functions present at one face of Janus‐type dendrimer‐like PEOs were transformed into alkyne groups through a simple Williamson‐type etherification reaction. Next, the ketals carried by the other face of the dendrimer‐like PEOs were hydrolyzed, yielding twice as many hydroxyls which were subsequently subjected to an esterification reaction using 2‐bromopropionic bromide. Before substituting azides for the bromide of 2‐bromopropionate esters just generated in the presence of NaN₃, an azido‐containing amidified FA derivative was reacted through click chemistry with alkyne functions introduced on the other face of the dendrimer‐like PEOs. A purposely designed alkyne‐functionalized biomolecule derived from CPT was conjugated to the azido functions carried by the dendritic PEOs by a second “click reaction.” In this case, twice as many CPT as FA moieties were finally conjugated to the two faces of the Janus‐type dendrimer‐like PEOs, the numbers of folate and CPT introduced being 2 and 4, 4 and 8, and 8 and 16 for samples of 1st, 2nd, and 3rd generation, respectively (route A). An alternate route for functionalizing the dendrimer‐like PEO of 1st generation consisted, first, in conjugating the azido‐containing CPT onto the alkyne groups present on one face of the dendritic PEO scaffold. The alkyne‐functionalized FA was further introduced by click chemistry after the bromides of 2‐bromopropionate esters were chemically transformed into azido groups. The corresponding prodrug thus contains 2 CPT and 4 FA external moieties (route B). Every reaction step product was thoroughly characterized by ¹H NMR spectroscopy. A preliminary investigation into the water solution properties of these functionalized dendritic PEOs is also presented. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and photovoltaic properties of poly(p‐phenylenevinylene) derivatives containing oxadiazole

A novel poly(p‐phenylenevinylene) PPV‐based copolymer (3C‐OXD‐PPV) with electron‐deficient oxadiazole segments as the side chain has been successfully synthesized through the Gilch polymerization. The obtained copolymer is soluble in common organic solvents such as chloroform, tetrahydronfuran, and 1,1,2,2‐tetrachloroethane. The copolymer was characterized by ¹H NMR, elemental analysis and GPC. TGA measurement of the copolymer shows it has good thermal stability with decomposition temperature higher than 350 °C. The absorption, electrochemical properties of the 3C‐OXD‐PPV were investigated and also compared with the properties of MEH‐PPV. The HOMO and LUMO levels of 3C‐OXD‐PPV were estimated from the electrochemical cyclic voltammograms. Bulk‐heterojunction PVCs were fabricated by using 3C‐OXD‐PPV blended PCBM as an active layer. The PCE of the PVC is 1.60% under 100 mW cm^?2 AM 1.5 illumination, which indicates that 3C‐OXD‐PPV is a potential candidate for the application of polymer PVC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1003–1012, 2009     

Liquid crystalline conjugated polymers and their applications in organic electronics

This article describes the syntheses and electro‐optical applications of liquid crystalline (LC) conjugated polymers, for example, poly(p‐phenylenevinylene), polyfluorene, polythiophene, and other conjugated polymers. The polymerization involves several mechanisms: the Gilch route, Heck coupling, or Knoevenagel condensation for poly(p‐phenylenevinylene)s, the Suzuki‐ or Yamamoto‐coupling reaction for polyfluorenes, and miscellaneous coupling reactions for other conjugated polymers. These LC conjugated polymers are classified into two types: conjugated main chain polymers with long alkyl side chains, namely main‐chain type LC polymers, and conjugated polymers grafting with mesogenic side groups, namely side‐chain type LC conjugated polymers. In general, the former shows higher transition temperature and only nematic phase; the latter possesses lower transition temperature and more mesophases, for example, smectic and nematic phases, depending on the structure of mesogenic side chains. The fully conjugated main chain promises them as good candidates for polarized electroluminescent or field‐effect devices. The polarized emission can be obtained by surface rubbing or thermal annealing in liquid crystalline phase, with maximum dichroic ratio more than 20. In addition, conjugated oligomers with LC properties are also included and discussed in this article. Several oligo‐fluorene derivatives show outstanding polarized emission properties and potential use in LCD backlight application. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2713–2733, 2009     

Photophysics,electrochemical properties,and electroluminescence of poly(p‐phenylenevinylene) derivatives with 1,3,5‐triphenylbenzene or 2,4,6‐triphenylpyridine segments along the backbone

The steady‐state and time‐resolved photoluminescence (PL), electrochemical behavior, and electroluminescence (EL) of didodecyloxy poly(p‐phenylenevinylene)‐based polymers that contained along the backbone structure 1,3,5‐triphenylbenzene (PC) or 2,4,6‐triphenylpyridine (PN) were studied. An intensive green PL broad‐band emission with maxima at 516 and 527 nm was observed from thin films of PC and PN polymers, respectively, redshifted in comparison with the PL emission spectra measured in tetrahydrofuran solutions. The PL decay dynamics revealed the existence of more than one excited species, and the decay curves were best described by three‐term exponential functions with a dominant lifetime of about 1 ns. The results of time‐resolved PL and steady‐state PL studies indicated excimer or aggregate formation. Both polymers oxidized irreversibly. A quasireversible reduction was observed in the PN polymer, whereas the PC polymer reduced irreversibly. For PC, slightly higher values of the ionization potential (E_IP) and electron affinity (E_A) were found (E_IP = 5.52 eV, E_A = 2.85 eV) than those for PN (E_IP = 5.37 eV, E_A = 2.77 eV). Light‐emitting devices with indium tin oxide hole‐injecting and aluminum electron‐injecting electrodes were prepared and studied. They emitted green light, and their EL spectra were similar to those of PL thin films. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 524–533, 2006     

FT‐IR Investigation into the miscible interactions in new materials for optical devices

In this article we determine the miscibility of azobenzene derivative (poly(4‐(N‐(2‐methacryloyloxyethyl)‐N‐ethylamino)‐4′‐nitroazobenzene)₉₀‐co‐(methyl methacrylate)₁₀)/poly(vinyl acetate) (PVAc) and azobenzene derivative/poly(vinyl chloride) (PVC) blends using Fourier Transform infrared (FT‐IR) spectroscopy. With this method we can clearly identify the exact interactions responsible for miscibility. In the azobenzene derivative 50:50PVAc blend new peaks were evident at 2960, 2890, 1237 and 959 cm^?1, these peaks depict miscible interactions. These wavenumbers indicate that the miscible interactions occurring are from the C? H stretching band, the vinyl acetate C?O, conjugated to the ester carbonyl, the cis‐transformation N?N stretch frequency and the acetate ester weak doublet. The azobenzene derivative 80:20PVC blend display peaks identical in profile to the blend homopolymers, indicating no miscible interactions. However, this could be due to overlapping of peaks within the same wavenumber region, making resolution difficult. This research demonstrates FT‐IR can deduce favorable interactions for miscibility and therefore numerous miscible blends can successfully be calculated if possessing the same groups responsible for miscibility. This paves the way for a new generation of designer optical materials with the desired properties. Copyright © 2003 John Wiley & Sons, Ltd.     

A greener organic chemistry experiment: reduction of citronellal to citronellol using poly(methylhydro)siloxane

Abstract

An undergraduate organic chemistry experiment based on literature reports in which the aldehyde functionality of citronellal is reduced to the primary alcohol is reported. The reducing agent, poly(methylhydro)siloxane (PMHS), is activated via a catalytic amount of fluoride. This polymeric reducing agent can be introduced as a safer, and thus, greener, alternative to sodium borohydride in the undergraduate laboratory setting, as PMHS is stable to air and water. The execution of this experiment requires standard organic chemistry techniques and the reduced substrate is analyzed via IR spectroscopy.     

Surface and interfacial segregation of polyethersulfone deuterated chain ends determined by neutron reflectivity

The surface localization of polymer chain ends has been shown to be an effective method for surface composition control in amorphous polymer films. This work determines chain end distribution in thin polyethersulfone (PESU) films end‐capped with deuterated compounds of varying size and composition. Neutron reflectivity revealed the preferential localization of chain ends to the PESU‐air interface, independent of chain end identity. The length scale of the chain end concentration gradient was determined to differ from that predicted for flexible chain polymers. Atomic force microscopy and contact angle analysis demonstrated that chain end localization allows for improved control of nanoscale and macroscale surface properties of PESU films. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 293–301     

Supramolecular photocatalyst of Palladium (II) Encapsulated within Dendrimer on TiO2 nanoparticles for Photo‐induced Suzuki‐Miyaura and Sonogashira Cross‐Coupling reactions

In this study, synthesis, characterization and catalytic performance of a novel supramolecular photocatalytic system including palladium (II) encapsulated within amine‐terminated poly (triazine‐triamine) dendrimer modified TiO₂ nanoparticles (Pd (II) [PTATAD] @ TiO₂) is presented. The obtained nanodendritic catalyst was characterized by FT‐IR, ICP‐AES, XPS, EDS, TEM, TGA and UV‐DRS. The as‐prepared nanodendritic catalyst was shown to be highly active, selective, and recyclable for the Suzuki–Miyaura and Sonogashira cross‐coupling of a wide range of aryl halides including electron‐rich and electron‐poor and even aryl chlorides, affording the corresponding biaryl compounds in good to excellent yields under visible light irradiation. This study shows that visible light irradiation can drive the cross‐coupling reactions on the Pd (II) [PTATAD] @ TiO₂ under mild reaction conditions (27–30 °C) and no additional additives such as cocatalysts or phosphine ligands. So, we propose that the improved photoactivity predominantly benefits from the synergistic effects of Pd (II) amine‐terminated poly (triazine‐triamine) dendrimer on TiO₂ nanoparticles that cause efficient separation and photogenerated electron–hole pairs and photoredox capability of nanocatalyst which all of these advantages due to the tuning of band gap of catalyst in the visible light region.     

Temperature‐dependent phase‐segregation behavior and antifouling performance of UV‐curable methacrylated PDMS/PEG coatings

Controllable phase segregation adjustment for immiscible polymer blends has always been tough, which hinders the development of amphiphilic antifouling coatings from more accessible blends. Herein, methacrylated poly(dimethylsiloxane) (PDMS‐MA) was synthesized and mixed with poly(ethylene glycol)methylether methacrylate (PEG‐MA). It was interestingly discovered that these PDMS‐MA/PEG‐MA blends displayed upper critical solution temperatures (UCST) due to thermo‐induced conformational change of PEG‐MA and the UCST changed with PDMS‐MA/PEG‐MA mass ratios. Micro‐/nano‐phase segregation, nanophase segregation, or homogenous morphology were therefore achieved. These PDMS‐MA/PEG‐MA blends with different mass ratios were UV‐cured under varying temperatures to fabricate coatings. Their surface morphology and wettability are readily adjusted by phase segregation. For the first time, highly hydrophilic surface was achieved for coatings with microphase segregation because of the exposure of PEG‐rich domains, which exhibited an enhanced protein resistance against bovine serum albumin (BSA). Anti‐bacterial performance (Shewanella loihica) was also observed for these PDMS/PEG coatings. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1612–1623     

Synthesis of dendrimer‐like copolymers based on the star[Polystyrene‐Poly(ethylene oxide)‐Poly(ethoxyethyl glycidyl ether)] terpolymers by click chemistry

The dendrimer‐like copolymers [PEEGE‐(PS/PEO)]_n (n ≥ 2) based on the star[Polystyrene‐Poly(ethylene oxide)‐Poly(ethoxyethyl glycidyl ether)] [star(PS‐PEO‐(PEEGE‐OH))] terpolymers were synthesized by click chemistry. First, the star‐shaped copolymers star[PS‐PEO‐(PEEGE‐Alkyne)] (also termed as [PEEGE‐(PS/PEO)]₁) were synthesized by the reaction of hydroxyl end group at PEEGE arm (on star[PS‐PEO‐(PEEGE‐OH)]) with propargyl bromide. Then, the small molecule 1,4‐diazidobutane (DAB) with two azide groups and pentaerythritol tetrakis (2‐azidoisobutyrate) (PTAB) with four azide groups were synthesized and reacted with [PEEGE‐(PS/PEO)]₁ by the click chemistry for dendrimer‐like [PEEGE‐(PS/PEO)]₂ and [PEEGE‐(PS/PEO)]₄, respectively. However, in the latter case, only the [PEEGE‐(PS/PEO)]₃ was formed as the main product because of the steric effect. The final dendrimer‐like [PEEGE‐(PS/PEO)]_n copolymers were characterized by SEC and ¹H‐NMR in detail. Comparing with the SEC of their precursor [PEEGE‐(PS/PEO)]₁, the curves of [PEEGE‐(PS/PEO)]₂ was shifted to the shorter elution time, while that of [PEEGE‐(PS/PEO)]_n (n ≥ 3) was shifted to the longer elution time, which was attributed to the different hydrodynamic volume derived from their separate structures and compositions in THF solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4800–4810, 2009     

Synthesis and characterization of different poly(1‐vinylindole)s for photorefractive materials

The main goal of this research was to verify if some advantages could be obtained by the replacement of poly(1‐vinylcarbazole), a component commonly employed for organic photorefractive materials, with various polymers containing side‐chain heteroaromatic moieties. For this purpose, poly(1‐vinylpyrrole), poly(1‐vinylindole), and some methyl‐substituted compounds of poly(1‐vinylindole) were considered. The best conditions for both monomer synthesis and polymerization were found. A first possible advantage of the new polymeric substrates resided in the values of the glass‐transition temperature, which, as expected, was constantly lower than that of poly(1‐vinylcarbazole). This could lead to a material that requires the introduction of a lower quantity of plasticizer in the final photorefractive blend to display photorefractive behavior at room temperature. In addition, the verified higher electric dipole moments of the pyrrole and indole derivatives could improve the compatibility of the optically nonlinear component required in the system, typically an azo‐molecule, by increasing its solubility inside the blend. All the synthesized vinyl monomers and polymers gave clear spectroscopic evidence of the formation of charge‐transfer complexes with 2,4,7‐trinitrofluorenylidenmalonitrile, an efficient sensitizer for photoconductivity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 253–262, 2001