Mechanism of the anionic polymerization of methyl methacrylate initiated by tetramethylammonium–triphenylmethide in tetrahydrofuran

A tetramethylammonium (TMA)–triphenylmethide (TPM) initiator generated in situ by the reaction of trimethyltriphenylmethylsilane with tetramethylammonium fluoride in tetrahydrofuran was found to have greater stability than the corresponding tetrabutylammonium or tetrahexylammonium derivatives. The predominant mode of degradation of TMA–TPM was found to be the TMA‐mediated methylation of TPM anions. The initiation of methyl methacrylate by TMA–TPM in tetrahydrofuran at ?78 °C was demonstrated to produce quantitative yields of poly(methyl methacrylate) with polydispersities of less than 1.1. Although the initiator efficiencies were low (9–40%) because of relatively slow initiation on the polymerization timescale, the initiation appeared to be rapid enough to give relatively narrow molecular weight distributions. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 237–244, 2004     

High polymerization of methyl methacrylate with organonickel/MMAO systems

A series of nickel complexes, including Ni(acac)₂, (C₅H₅)Ni(η³‐allyl), and [NiMe₄Li₂(THF)₂]₂, that were activated with modified methylaluminoxane (MMAO) exhibited high catalytic activity for the polymerization of methyl methacrylate (MMA) but showed no catalytic activity for the polymerization of ethylene and 1‐olefins. The resulting polymers exhibited rather broad molecular weight distributions and low syndiotacticities. In contrast to these initiators, the metallocene complexes (C₅H₅)₂Ni, (C₅Me₅)₂Ni, (Ind)₂Ni, and (Me₃SiC₅H₄)₂Ni provided narrower molecular weight distributions at 60 °C when these initiator were activated with MMAO. Half‐metallocene complexes such as (C₅H₅)NiCl(PPh₃), (C₅Me₅)NiCl(PPh₃), and (Ind)NiCl(PPh₃) produced poly(methyl methacrylate) (PMMA) with much narrower molecular weight distributions when the polymerization was carried out at 0 °C. Ni[1,3‐(CF₃)₂‐acac]₂ generated PMMA with high syndiotacticity. The NiR(acac)(PPh₃) complexes (R = Me or Et) revealed high selectivity in the polymerization of isoprene that produced 1,2‐/3,4‐polymer at 0 °C exclusively, whereas the polymerization at 60 °C resulted in the formation of cis‐1,4‐rich polymers. The polymerization of ethylene with Ni(1,3‐tBu₂‐acac)₂ and Ni[1,3‐(CF₃)₂‐acac]₂ generated oligo‐ethylene with moderate catalytic activity, whereas the reaction of ethylene with Ni(acac)₂/MMAO produced high molecular weight polyethylene. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4764–4775, 2000     

Influence of different initiators on methyl methacrylate polymerization,studied by differential scanning calorimetry

Differential scanning calorimetry (DSC) was used to measure the decomposition rates of four commercially used initiators, 2,2′-azobis(isobutyronitrile) 2,2′-azobis(2,4-dimethylvaleronitrile), dilauroyl peroxide and bis(4-t-butylcyclohexyl)peroxydicarbonate, in dynamic mode, while the courses of methyl methacrylate polymerization with the listed initiators at 65, 75 and 85°C were measured isothermally. From the DSC curves, the polymerization enthalpies, the overall reaction rate constants and the activation energies for the initial steady-state polymerization were calculated. It was found that the polymerization enthalpy and the kinetic parameters depended on the type of the initiator. An initiator with a shorter decomposition half-lifetime shifted the onset of the gel effect to a higher conversion, intensified it and decreased the average molar mass of the polymer.     

Hindered lithium dialkylamide initiators for the living anionic polymerization of methacrylic esters

Lithium diisopropylamide is an efficient initiator for the anionic polymerization of methyl methacrylate in polar solvents at –78°C. Predictable molecular weights based on the initiator concentration were obtained, yields were quantitative, and molecular weight distributions were relatively narrow (<1.30). The presence of an amino end group and confirmation of the initiation mechanism were confirmed by potentiometric titration using HClO₄. Number-average molecular weights determined by titration agreed well with values determined by SEC. Other lithium dialkylamides that contain larger alkyl groups such as lithium diisobutylamide were less efficient initiators. This was attributed to the more nucleophilic anion due to less steric hindrance near the nitrogen atom. Molecular weight distributions were significantly broadened (>2.0), and molecular weight control was not achieved. However, polymer yields were quantitative. In all cases, PMMA stereochemistry was indicative of a solvent-separated lithium counterion, and triad compositions were identical to organolithium initiated homopolymers, i.e., 78% syndiotactic, 20% heterotactic, and 2% isotactic. © 1994 John Wiley & Sons, Inc.     

Preparation of functional polymers by living anionic polymerization: Polymerization of allyl methacrylate

The anionic polymerization of allyl methacrylate was carried out in tetrahydrofuran, both in the presence and in the absence of LiCl, with a variety of initiators, at various temperatures. It was found that (1,1-diphenylhexyl)lithium and the living oligomers of methyl methacrylate and tert-butyl methacrylate are suitable initiators for the anionic polymerization of this monomer. The temperature should be below −30°C, even in the presence of LiCl, for the living polymerization to occur. When the polymerization proceeded at −60°C, in the presence of LiCl, with (1,1-diphenylhexyl)-lithium as initiator, the number-average molecular weight of the polymer was directly proportional to the monomer conversion and monodisperse poly(allyl methacrylate)s with high molecular weights were obtained. ¹H-NMR and FT-IR indicated that the α CC double bond of the monomer was selectively polymerized and that the allyl group remained unreacted. The prepared poly(allyl methacrylate) is a functional polymer since it contains a reactive CC double bond on each repeating unit. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 2901–2906, 1997     

异戊二烯-甲基丙烯酸甲酯的阴离子嵌段共聚合

在四氢呋喃（THF）与环己烷的混合溶剂中,以正丁基锂（n-BuLi）为引发剂,采用具有较大空间位阻和特定电荷环境的P配合物为添加剂,实现了异戊二烯（Ip）和甲基丙烯酸甲酯（MMA）的阴离子嵌段共聚。分别采用GPC、^1H—NMR对聚合物的结构进行了分析表征。结果表明：随着THF与环己烷体积比的增大,单体的转化率呈现下降的趋势;同时空间位阻较大的P配合物的加入,堵塞了正、负离子对之间的部分通道,有效地抑制了MMA段聚合副反应的发生,在易于工业化的0℃之下成功合成了分子量分布窄（1．21）的聚异戊二烯一聚甲基丙烯酸甲酯嵌段共聚物（PI—b—PMMA）,并且共聚物中PI嵌段以3,4结构链节为主。     

Modeling of elementary reactions and kinetics of radical‐initiated methyl methacrylate polymerization in the presence of ferrocene

On the basis of quantum chemical modeling, a kinetic scheme of methyl methacrylate polymerization initiated by benzoyl peroxide in the presence of ferrocene was proposed. The process runs by mechanism, which includes the reactions of free radical polymerization, and the reactions leading to formation and operability of two type coordination active sites that are capable of converting into each other. On the basis of the proposed scheme, a kinetic model was developed. This model quantitatively described the following: the experimentally determined time dependences of the methyl methacrylate conversion, the conversion dependencies of the number‐average and weight‐average molar masses of poly(methyl methacrylate), the stereoregularity values of poly(methyl methacrylate), and the time dependencies of the methyl methacrylate conversion upon its polymerization on poly(methyl methacrylate) macroinitiators obtained in radical‐initiated polymerization in the presence of ferrocene. As a result of solving the inverse kinetic problem, the parameters of temperature dependences of the reaction rate coefficients of the proposed kinetic scheme were found.     

Ultrasonically initiated emulsion polymerization of methyl methacrylate

The ultrasonically initiated emulsion polymerization of methyl methacrylate (MMA) was investigated. Experimental results show that sodium dodecyl sulfonate (SDS) surfactant plays a very important role in obtaining a high polymer yield, because in the absence of SDS, monomer conversion is near zero. Thus, the surfactant serves as an initiator and as interfacial modifier in this system (MMA/H₂O), and the monomer conversion increases significantly with increasing SDS concentration. An increase in the reactor temperature also leads to an increase in the monomer conversion. An appropriate increase in the N₂ purging rate also leads to higher conversion. The conversion of MMA decreases with increasing monomer concentration because of the higher viscosity of the system. With the experimental results, optimized reaction conditions were obtained. Accordingly, a high monomer conversion of about 67% and a high molecular weight of several millions can be obtained in a period of about 30 min. Furthermore, transmission electron micrographs show that the latex particles prepared are nanosized, indicating a promising technique for preparing nanoscale latex particles with a small amount of surfactant. In conclusion, a promising technique for ultrasonically initiated emulsion polymerization has been successfully performed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3356–3364, 2001     

Anionic polymerization of methyl methacrylate by initiating systems based on lithium amides of various secondary amines

The anionic polymerization of methyl methacrylate in toluene at −78 °C with lithium amides of various secondary amines (diisopropylamine, N‐isopropylaniline, N‐n‐butylaniline, indoline, and N‐ethyl‐o‐toluidine) as initiators was studied. The tacticity of the resulting poly(methyl methacrylate)s (PMMAs) was dependent on the kind of secondary amine, and highly isotactic PMMAs (91–93% mm) were obtained when lithium amides of N‐isopropylaniline and N‐n‐butylaniline were employed. The isotacticity of the PMMAs further increased up to 98% mm with initiating systems composed of the lithium amides, n‐butyllithium, and transition‐metal halides (WCl₆, MoCl₅, and NbCl₅). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4405–4411, 2005     

Asymmetric anionic polymerization of (2-fluorophenyl)(4-fluorophenyl)(2-pyridyl)methyl methacrylate leading to a helical polymer

A novel racemic methacrylate, (2-fluorophenyl)(4-fluorophenyl)(2-pyridyl)-methyl methacrylate¹ (2F4F2PyMA), was synthesized and polymerized with chiral complexes of N,N′-diphenylethylenediamine monolithium amide (DPEDA-Li) with (−)-sparteine (Sp), (2S, 3S)-(+)-2,3-dimethoxy-1,4-bis(dimethylamino)butane (DDB), and (S)-(+)-1-(2-pyrrolidinylmethyl)pyrrolidine (PMP) in toluene at −78°C. The monomer showed higher resistance against methanolysis compared with triphenylmethyl methacrylate (TrMA) and several other analogues. In the asymmetric anionic polymerization of 2F4F2PyMA, PMP was found to be a more effective chiral ligand than DDB and Sp and gave quantitatively an optically active polymer with nearly perfect isotacticity. Enantiomer selection was observed in the polymerization of racemic 2F4F2PyMA with the chiral lithium complexes. Chiral recognition ability of the optically active poly(2F4F2PyMA) was examined by an enantioselective adsorption experiment. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2013–2019, 1998     

Studies on bulk polymerization of methyl methacrylate. I. Thermal polymerization

The thermal bulk polymerization of methyl methacrylate (MMA) in a wide range of temperatures has been studied using a dilatometric reactor. It is shown that, irrespective of the care taken to purify the MMA, the evolution of the time-conversion curve can be explained only if we account for the presence of an impurity associated with the monomer acting as a free radical initiator. The activation energy for the decomposition of this impurity has been estimated as 98 kJ/mol. Having accounted for this impurity, the activation energy for the real thermal polymerization of the MMA has been estimated to be 75 kJ/mol. © 1993 John Wiley & Sons, Inc.     

Anionic polymerization of methyl methacrylate initiated with molybdenum and tungsten chloride/organolithium/triisobutylaluminum systems

Molybdenum chloride (MoCl₅ or 1a ) and tungsten chloride (WCl₆ or 1b )/phenyllithium (PhLi)/triisobutylaluminum (iBu₃Al) systems were found to be quite effective for controlling the anionic polymerization of methyl methacrylate (MMA), affording high molecular weight poly(methyl methacrylate)s (PMMAs; number‐average molecular weight > 100,000) with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.25) quantitatively at 0 °C for 1 h in toluene. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) analyses of PMMAs obtained with the 1a and 1b /organolithium (RM; n‐butyllithium, PhLi)/iBu₃Al systems revealed that the initiation of MMA with the systems occurred by a nucleophilic attack of H^? to the monomer. In addition, the MALDI‐TOF MS analyses indicated that the presence of iBu₃Al was responsible for the controlled polymerization by improving the uniformity of the polymerization with respect to initiation and termination and by preventing a backbiting reaction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4302–4315, 2002     

Ruthenium carborane complexes in the controlled radical polymerization of methyl methacrylate

New initiators based on closo-and exo-nido-ruthenacarboranes with phosphine and diphosphine ligands were proposed as chain growth regulators. They allow conducting the controlled synthesis of poly(methyl methacrylate) under radical initiation conditions. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 85–89, January, 2006.     

Anionic polymerization of methyl methacrylate initiated with late transition‐metal halides/organolithium/triisobutylaluminum systems

Anionic polymerization of methyl methacrylate (MMA) initiated with late transition‐metal halides [manganese chloride (MnCl₂), iron dichloride (FeCl₂), iron trichloride (FeCl₃), cobalt chloride (CoCl₂), or nickel bromide (NiBr₂)]/organolithium [nButyllithium (nBuLi) or phenyllithium (PhLi)]/triisobutylaluminum (iBu₃Al) systems is described. Except for the system with NiBr₂, the polymerizations of MMA afforded narrow molecular weight distribution poly(methyl methacrylate)s (PMMAs) with high molecular weights in quantitative yields at 0 °C in toluene. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) analyses of the PMMAs obtained by the systems with FeCl₂, FeCl₃, and CoCl₂ revealed that the polymers had hydrogen (H) at both chain ends. Accordingly, the reaction of the transition‐metal halides with the organolithium in the presence of iBu₃Al should result in the formation of transition‐metal hydride [M‐H]^? species, which was nucleophilic enough to initiate the MMA polymerization. Because the presence of a six‐membered cyclic structure resulting from backbiting was confirmed from the MALDI‐TOF MS analyses of the PMMA obtained with the metal halide (FeCl₂, FeCl₃, or CoCl₂)/organolithium systems in the absence of iBu₃Al, the introduction of H at the ω‐chain end indicated that iBu₃Al should prevent the backbiting. However, the MnCl₂/nBuLi/iBu₃Al initiating system gave PMMAs bearing H at the α chain end and six‐membered cyclic structure at the ω chain end. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1962–1977, 2003     

Anionic polymerization of methyl methacrylate initiated with lithium diphenylamide (Ph2NLi) in the presence of divalent transition metal halide

Anionic polymerization of methyl methacrylate (MMA) in the presence of divalent transition metal halide (MX₂ = FeBr₂, MnCl₂, CoCl₂, NiBr₂) was investigated. Initiating systems with various combinations of MX₂, lithium diphenylamide (Ph₂NLi), and organolithium (RLi, where R = nBu, Me) were effective to giving a high yield of poly(methyl methacrylate)s (PMMAs) at ?78 °C in toluene. The tacticity of the resulting PMMAs was highly dependent on the combination of the reagents used for the generation of the initiating systems within a syndiotactic (rr = 59%) to isotactic (mm = 65%) range. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 31–37, 2004     

Effect of the solvent polarity on the living ligated anionic polymerization of tert-butyl methacrylate and copolymerization with methyl methacrylate

An anionic polymerization of t-butyl methacrylate and a copolymerization with methyl methacrylate were initiated with an organolithium ligated with 10 equiv of LiCl. As a rule, the complexation of the active species by LiCl masked the effect that the polarity of the solvent might have on the molecular structure of the chains. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1774–1785, 2001     

Control of particle size in dispersion polymerization of methyl methacrylate

Poly(methyl methacrylate) (PMMA) particles ranging in diameter from 2 to 10 μm were prepared by dispersion polymerization. The effects of various polymerization parameters on the size and monodispersity were systematically investigated. The particle size was found to increase with increasing polymerization temperature, concentration and decomposition rate of the initiator, and solvency of the dispersion medium. It also increased with increasing concentration and molecular weight of the polymeric stabilizer, poly(vinyl pyrrolidone) (PVP). As the monomer concentration was increased from 5 to 20 wt %, a minimum was found in the particle size at a monomer concentration of 10 wt %. A costabilizer was found to be necessary for preparing monodisperse particles at stabilizer concentrations below 2 wt %. A recycling experiment showed that the consumption of PVP was quite small in each cycle and the residual materials in this system could be reused readily. © 1993 John Wiley & Sons, Inc.     

Unbridged bivalent lanthanidocenes for isotactic and stereomultiblock polymerization of methyl methacrylate

Bivalent organolanthanides with unbridged substituted indenyl or fluorenyl ligands (1-SiMe₃Ind)₂YTHF ( I ), (9-SiMe₃Flu)₂YTHF ( II ), were found to efficiently catalyze the stereoregular polymerization of methyl methacrylate. The microstructure of resultant polymers was shown to be dependent of a conformation that the ligands adopt at the polymerization temperature. The formation of isotactic rich PMMAs from complex II was proposed to be associated with the fluctuation of the 9-trimethylsilylfluorenyls around a C₂ symmetric twisted-conformation. The formation of the multi(syndioPMMA-block-iso-PMMA) polymers from the mixture of rac- and meso-isomers of I was rationalized on the basis of competing conjugate addition and inversion of the metallocene conformation. Surprisingly, both rac- and meso-isomers of I were found to operate with similar activity and stereospecifity, although the stereospecific operation of the meso-form was not completely understandable. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1599–1606, 1998