Determining the density profile of confined polymer brushes with neutron reflectivity

Polymer molecules at solid or fluid interfaces have an enormous spectrum of applications in a wide variety of technologies as lubricants, adhesion modifiers, and protective surface coatings. Because polymer brushes have great potential to be used in such applications, there is a need to determine their structure and efficiency in reduced spaces. Using neutron reflectivity, we have directly quantified the density distribution of opposing polymer brushes under confinement in good solvent conditions under confinement. Our measurements show that the density profile in the overlap region between opposing polymer brushes flattens, consistent with predictions from molecular-dynamics simulations. In addition, a significant increase in the density at the anchoring surfaces due to the collapse of the brush layers was observed. This collapse of the brushes in restricted geometries suggests that high-density brushes do not interpenetrate significantly under good solvent conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3290–3301, 2004     

Acrylic polymer/silica organic–inorganic hybrid emulsions for coating materials: Role of the silane coupling agent

Acrylic polymer/silica organic–inorganic hybrid emulsions were synthesized by a simple method, that is, a conventional emulsion polymerization and subsequent sol–gel process, to provide water‐based coating materials. The acrylic polymer emulsions contained a silane coupling agent monomer, such as methacryloxypropyltriethoxysilane, to form highly solvent‐resistant hybrid films. On the other hand, the hybrid films from the surface‐modified polymer emulsions, in which the silane coupling agent was located only on the surface of the polymer particles and the particle core was not crosslinked, did not exhibit high solvent resistance. A honeycomblike array structure, which was derived from the polymer particles (diameter ≈ 50 nm) and the silica domain, on the hybrid film surfaces was observed by atomic force microscopy. The crosslinked core part and silane coupling agent containing the shell part of the polymer particles played important roles in attaining high solvent resistance. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4736–4742, 2006     

Thermally induced color change in electrospun fiber mats

Electrospinning is a process that employs a high static electrical potential to produce polymeric fibers of nanoscale diameter. The process has been utilized to achieve color change by electrospinning black polymer solutions to produce white fiber mats. When subsequently heated, the electrospun mats undergo a color change from white to black. This phenomenon is demonstrated with three polymer/solvent systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 752–757, 2004     

Synthesis and properties of the [2.2]paracyclophane‐containing conjugated polymer with benzothiadiazole as an electron acceptor

A novel donor–acceptor type conjugated polymer based on PPE with [2.2]paracyclophane and benzothiadiazole units in the main chain was synthesized by the Sonogashira coupling reaction. The obtained polymer was quite soluble in common organic solvents, and the transparent and uniform thin film of the polymer was obtained easily by casting or spin‐coating from a toluene solution. The polymer showed an extension of π‐delocalization via the through‐space with π‐π stacking according to the UV–visible (UV–vis) absorption spectra in comparison with that of the model compound. The polymer exhibited orange photoluminescence in solution (fluorescence quantum efficiency = 0.13) and in the solid state. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5891–5899, 2004     

Rapid spectroscopic confirmation of the presence of polystyrene in polymer particles of mixed composition

A technique for rapid determination of the presence of polystyrene in individual micron-diameter polymer particles of mixed composition is presented. This technique is based upon observation of visible emission from conjugated regions of the polymer backbone, generated photochemically, while the particle is held in an optical trap. Particle emission characteristics are dependent upon particle size and suspending solvent. Emission spectra are provided for single component polystyrene particles and mixed polymer particles containing poly(methyl methacrylate), poly(N-vinyl pyrrolidone), and polystyrene. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 999–1004, 1998     

Effect of solvent quality on kinetics of tethered layer formation

We conducted a study of the effect of solvent quality on the kinetics of formation of a layer of polymer chains tethered to a solid substrate. In these experiments, tethering was accomplished by means of chemical bond formation between reactive sites on the surface and the end‐functional groups of the polymer chains in solution. All experimental variables were held constant except for the χ‐parameter between the polymer and solvent. Variation in the χ‐parameter was achieved by use of a series of nonpolar, organic solvents. The distinct three‐regime kinetics, typical of tethering reactions run in a good solvent and in the absence of segmental adsorption, was observed over the range of values for the χ‐parameter. As expected, an increase in the χ‐parameter (a decrease in solvent quality) did result in increased tethering density, but, contrary to expectation, no increase in tethering rate was observed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5530–5537, 2004     

Effects of added surfactants on thermoreversible gelation of associating polymer solutions

The influence of added surfactants on physical properties of associating polymer solutions was examined by a new statistical‐mechanical theory of associating polymer solutions with multiple junctions and by computer simulation. The sol–gel transition line, the spinodal line, and the number of elastically effective chains in the mixed networks were calculated as functions of the concentration of added surfactants. All of them exhibited nonmonotonic behavior as a result of the following two competing mechanisms. One was the formation of new mixed micelles by binding surfactants onto the polymer associative groups. These micelles serve as crosslink junctions and promote gelation. The other was the replacement of polymer associative groups in the already formed network junctions by added surfactants. Such replacement lowers connectivity of junctions and destroys networks. The critical micelle concentration was also calculated. The results are compared with the reported experimental data on poly(ethylene oxide)‐based associating polymers and hydrophobically modified cellulose derivatives. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 733–751, 2004     

Effect of composition on the width of the calorimetric glass transition in polymer–solvent and solvent–solvent mixtures

The calorimetric glass‐transition temperature (T_g) and transition width were measured over the full composition range for solvent–solvent mixtures of o‐terphenyl with tricresyl phosphate and with dibutyl phthalate and for polymer–solvent mixtures of polystyrene with three dialkyl phthalates. T_g shifted smoothly to higher temperatures with the addition of the component with the higher T_g for both sets of solvent–solvent mixtures. The superposition of the differential scanning calorimetry traces showed almost no composition dependence for the width of the transition region. In contrast, the composition dependence of T_g in polymer–solvent mixtures was different at high and low polymer concentrations, and two distinct T_g's were observed at intermediate compositions. These results were interpreted in terms of the local length scale and associated local composition variations affecting T_g. The possible implications of these results for the dynamics of miscible polymer blends were examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1155–1163, 2004     

Poly(ethyleneimine)/arginine–glycine–aspartic acid conjugates prepared with N‐succinimidyl 3‐(2‐pyridyldithio)propionate: An investigation of peptide coupling and conjugate stability

Poly(ethylene imine) (PEI), a highly cationic polymer, is being used for deoxyribonucleic acid (DNA) complexation and delivery into cells. To enhance the cellular uptake of polymer/DNA complexes, arginine–glycine–aspartic acid (RGD) peptides have been conjugated to PEI with N‐succinimidyl 3‐(2‐pyridyldithio)propionate (SPDP). This coupling scheme creates a disulfide‐linked conjugate, the stability of which in the presence of thiols is uncertain. We have investigated the conjugation of an RGD peptide, glycine–arginine–glycine–aspartic acid–serine–proline–cysteine (GRGDSPC), to PEI with SPDP and subsequently assessed the stability of the conjugates in the presence of two thiol compounds, mercaptoethanol and cysteine. SPDP effectively controls the extent of GRGDSPC substitution on PEI. The conjugates, however, are readily cleaved in the presence of the thiols; the cleavage is rapid (～50% cleavage in 2–4 h) and inversely related to the degree of peptide substitution on the polymers. The peptide coupling is stable in the absence of thiols, and its cleavage is strongly dependent on the pH of the medium but not on the ionic strength of the medium. We conclude that RGD peptides coupled to PEI are labile in the presence of physiological concentrations of thiols, and this should be taken into account when such polymer–peptide conjugates are used for DNA delivery. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6143–6156, 2004     

Metal‐induced optical sensing and optical switching in poly(pyridyl phenylene)

The synthesis of a conjugated polymer containing pyridyl units in the polymer backbone was successfully carried out with 2,6‐dibromopyridine and a diboronic acid derivative via the Suzuki coupling reaction. This polymer had a number‐average molecular weight of 4000 and excellent solubility in conventional organic solvents; this suggested the effect of the incorporation of dialkoxy side chains. A metallochromic phenomenon with ferric ions was clearly observed in spin‐coated films and solutions of the polymer. The response of the absorption and the fluorescence changes of the polymer films were rapid and were reproduced more than 15 times. A lightly bound intermolecular interaction between the pyridine ligand and cation was presumed to be responsible for the facile optical switching property of the polymer films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2444–2450, 2004     

Plasticized microporous poly(vinylidene fluoride) separators for lithium‐ion batteries. I. Swelling behavior of dense membranes with respect to a liquid electrolyte—Characterization of the swelling equilibrium

Some poly(vinylidene fluoride) (PVdF) microporous separators for lithium‐ion batteries, used in liquid organic electrolytes based on a mixture of carbonate solvents and lithium salt LiPF₆, were characterized by the study of the swelling phenomena on dense PVdF membranes. We were interested in the evolution of the swelling ratios with respect to different parameters, such as the temperature, swelling solution composition, and salt concentration. To understand PVdF behavior in microporous membranes and, therefore, to have a means of predicting its behavior with different solvent mixtures, we correlated the swelling ratios in pure solvents and in solvent mixtures to the solvent–polymer interaction parameters and solvent–solvent interaction parameters. We attempted a parametric identification of swelling curves with a very simple Flory–Huggins model with relative success. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 532–543, 2004     

Influence of solvents on the formation of ultrathin uniform poly(vinyl pyrrolidone) nanofibers with electrospinning

Although there have been many reports on the preparation and applications of various polymer nanofibers with the electrospinning technique, the understanding of synthetic parameters in electrospinning remains limited. In this article, we investigate experimentally the influence of solvents on the morphology of the poly(vinyl pyrrolidone) (PVP) micro/nanofibers prepared by electrospinning PVP solution in different solvents, including ethanol, dichloromethane (MC) and N,N‐dimethylformamide (DMF). Using 4 wt % PVP solutions, the PVP fibers prepared from MC and DMF solvents had a shape like a bead‐on‐a‐string. In contrast, smooth PVP nanofibers were obtained with ethanol as a solvent although the size distribution of the fibers was somewhat broadened. In an effort to prepare PVP nanofibers with small diameters and narrow size distributions, we developed a strategy of using mixed solvents. The experimental results showed that when the ratio of DMF to ethanol was 50:50 (w/w), regular cylindrical PVP nanofibers with a diameter of 20 nm were successfully prepared. The formation of these thinnest nanofibers could be attributed to the combined effects of ethanol and DMF solvents that optimize the solution viscosity and charge density of the polymer jet. In addition, an interesting helical‐shaped fiber was obtained from 20 wt % PVP solution in a 50:50 (w/w) mixed ethanol/DMF solvent. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3721–3726, 2004     

Swelling of a polymer brush by a poor solvent

The addition of a small amount of a poor solvent impurity (methanol) to a theta solvent (cyclohexane) is found to cause appreciable swelling (≈30% increase of the average brush height) in a model end‐grafted polystyrene (PS) brush layer. This unusual type of swelling is not observed if octadecyltrichlorosilane (OTS) is first grafted to the portion of the silicon substrate uncovered by the grafting end‐groups of the PS chains. Brush swelling in the absence of OTS surface protection is interpreted as arising from a segregation of methanol to the solid substrate and the resulting modification of the polymer–surface interaction. We also observe that the addition of a small amount of methanol to an adsorbed PS layer exposed to cyclohexane causes rapid film delamination from the silicon substrate. Together these observations imply a strong influence of surface active impurities on the structure and adhesive stability of polymer layers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4126–4131, 2004     

High‐density polyethylene fractionation with supercritical propane

During the development of column extraction techniques, two methods of separation were identified. The first method is based on altering polymer solubility by varying the ratio of solvent in a solvent/nonsolvent mixture at a constant temperature above the polymer melting point (gradient solvent elution fractionation). This method fractionates polymers according to molecular weight. The second method is based on altering polymer solubility by varying solvent temperature (temperature rising elution fractionation—TREF). TREF fractionates semicrystalline polymers with respect to their crystallizability, independently of molecular weight effects. In the present article, supercritical propane will be used to fractionate a high‐density polyethylene sample by molecular weight and short chain branching. The main advantage of supercritical fluid fractionation is that large polymer fractions with narrow molecular weight distributions (isothermal fractionation) or narrow short chain branching distributions (isobaric fractionation) can be obtained without using hazardous organic chlorinated solvents. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 553–560, 1999     

Fourth‐order hydrodynamic contribution to the polymer self‐diffusion coefficient

A hydrodynamic scattering treatment of interacting polymer chains is extended to obtain the five‐point chain–chain–chain–chain–chain hydrodynamic interaction tensor. The tensor is used to calculate the second‐order concentration correction to the self‐diffusion coefficient of a polymer in solution. The self‐similarity assumption of the hydrodynamic scaling model of polymer dynamics is tested against these calculations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1663–1670, 2004     

Unexpected end‐groups of poly(acrylic acid) prepared by RAFT polymerization

Low‐molecular‐weight poly(acrylic acid) (PAA) was synthesized by reversible addition fragmentation chain transfer polymerization with a trithiocarbonate as chain‐transfer agent (CTA). With a combination of NMR spectroscopy and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, the PAA end‐groups of the polymer were analyzed before and after neutralization by sodium hydroxide. The polymer prior to neutralization is made up of the expected trithiocarbonate chain‐ends and of the H‐terminated chains issued from a reaction of transfer to solvent. After neutralization, the trithiocarbonates are transformed into thiols, disulfides, thiolactones, and additional H‐terminated chains. By quantifying the different end‐groups, it was possible to demonstrate that fragmentation is the rate limiting step in the transfer reaction. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5439–5462, 2004     

Scaling and structural properties of a polymer in a simple solvent: A study based on integral equations

We present a statistical mechanical theory for polymer–solvent systems based on integral equations derived from the polymer Kirkwood hierarchy. Integral equations for pair monomer–monomer, monomer–solvent, and solvent–solvent correlation functions yield polymer–solvent distribution, chain conformation in three dimensions, and scaling properties associated with polymer swell and collapse in athermal, good, and poor solvents. Variation of polymer properties with solvent density and solvent quality is evaluated for chains having up to 100 bonds. In good solvents, the scaling exponent v has a constant value of about 0.61 at different solvent densities computed. For the athermal solvent case, the gyration radius and scaling exponent decrease with solvent density. In a poor solvent, the chain size scales as N^v with the value of the exponent being about 0.3, compared with the mean field value of ⅓. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 3025–3033, 1998     

Luminescent poly(phenylene vinylene) derivatives with m‐terphenyl or 2,6‐diphenylpyridine kinked segments along the main chain: Synthesis,characterization, and stimulated emission

Two new poly(phenylene vinylene)s containing m‐terphenyl or 2,6‐diphenylpyridine kinked units along the main chain were synthesized and were used as luminescent and laser materials. They were prepared from Heck coupling of 2,5‐didodecyloxy‐1,4‐divinylbenzene with 4,4″‐dibromo‐3′‐phenyl‐m‐terphenyl or 2,6‐di(4‐bromophenyl)‐4‐phenylpyridine. The kinked units along the main chain caused a partial interruption of the conjugation leading to emission at a shorter wavelength as compared with poly(p‐phenylene vinylene). The polymers presented blue‐green emission in solution and green‐yellow emission in the solid state with photoluminescence maxima at 465–497 and 546–550 nm, respectively. Polymer containing 2,6‐diphenylpyridine segments emitted at a longer wavelength than that containing m‐terphenyl and displayed higher quantum yields in solution (0.61 and 0.40, respectively). The influence of the solvent and polymer concentration on the photoluminescence characteristics was investigated. The photoluminescence properties of protonated polymer containing 2,6‐diphenylpyridine segments were investigated both in solution and in film. Amplified spontaneous emission and tunable laser action were also obtained from the two polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2214–2224, 2004     

Studies on molecular composite. I. Processing of molecular composites using a precursor polymer for poly(p‐phenylene benzobisthiazole)

The blending of a precursor polymer for poly(p‐phenylene benzobisthiazole) (PBZT) with various matrix polymers was attempted, followed by heat conversion of the PBZT precursor polymer to obtain molecular composites consisting of PBZT and the matrix polymers. A higher concentration of mixed solution using organic solvent and milder conditions to remove the solvent could be applied to blend the polymers using the precursor polymer in place of rodlike PBZT. The dispersibility of PBZT in the matrix polymer in the blended materials obtained depended on the ability to form intermolecular hydrogen bridges between the PBZT precursor and the matrix polymer. In particular, the blended material, obtained using a nonthermoplastic aromatic polyamide as the matrix polymer having a molecular structure similar to that of the PBZT prepolymer, was transparent and showed excellent reinforcing efficiency of PBZT. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 189–197, 1999     

Metastable liquid–liquid and solid–liquid phase boundaries in polymer–solvent–nonsolvent systems

In general liquid–liquid demixing processes are responsible for the porous morphology of membranes obtained by immersion precipitation. For rapidly crystallizing polymers, solid–liquid demixing processes also generate porous morphologies. In this study, the interference of both phase transitions has been analyzed theoretically using the Flory–Huggins theory for ternary polymer solutions. It is demonstrated that four main thermodynamic and kinetic parameters are important for the structure formation in solution: the thermodynamic driving force for crystallization, the ratio of the molar volumes of the solvent and the nonsolvent, the polymer–solvent interaction parameter, and the rate of crystallization of the polymer compared to the rate of solvent-nonsolvent exchange. An analysis of the relevance of each of these parameters for the membrane morphology is presented. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 763–770, 1997