Star polymer with crosslinked core and water‐soluble poly(N‐hydroxyethylacrylamide)‐arms: Synthesis by arm‐first method using ATRP and characterizations by SEC‐MALS and SAXS measurement in water

Core crosslinked star (CCS)‐polymers with water‐soluble arms composed of poly(N‐hydroxyethylacrylamide) (PHEAA) are described. N‐Hydroxyethylacrylamide was polymerized by the atom transfer radical polymerization consisting of ethyl 2‐chloropropionate, copper(I) chloride (CuCl), and tris[2‐(dimethylamino)ethyl]amine in an ethanol/water mixed solvent at 20 °C. The obtained PHEAA‐arms were subsequently coupled using N,N′‐methylenebisacrylamide as the crosslinking agent and sodium L ‐ascorbic acid (AscNa) as the reaction activator. A total of 17 representative coupling reactions with diverse conditions are discussed together with the characterizations of the products mainly by size exclusion chromatograph equipped with the multiangle laser light scattering detector (SEC‐MALS). Consequently, the coupling reactions provided CCS‐polymers with PHEAA‐arms (CCS‐PHEAAs) having weight averaged‐molecular weights determined by SEC‐MALS (M_w,MALS) ranging from 63.8 kg mol^?1 to 832 kg mol^?1, which corresponded to the average arm‐number (N_arm) ranging from 4.1 to 42, respectively. CCS‐PHEAA with the M_w,MALS of 250 kg mol^?1 was isolated and characterized by small angle X‐ray scattering measurements in 0.05 M NaNO₃ aq. at 25 °C, which was shown to possess a star‐shaped structure and exist as single molecules with a radius of gyration at the infinite dilution condition (<R_g²>_z,0^1/2) of 74 ± 4 Å. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Combination of nitroxide‐mediated polymerization and SET‐LRP for the synthesis of high molar mass branched and star‐branched poly(n‐butyl acrylate) characterized by size exclusion chromatography and rheology

Branched and star‐branched polymers were successfully synthesized by the combination of two successive controlled radical polymerization methods. A series of linear and star poly(n‐butyl acrylate)‐co‐poly(2‐(2‐bromoisobutyryloxy) ethyl acrylate) statistical copolymers, P(nBA‐co‐BIEA)_x, were first synthesized by nitroxide‐mediated polymerization (NMP at T > 100 °C). The subsequent polymerization of n‐butyl acrylate by single electron transfer‐living radical polymerization (SET‐LRP at T = 25 °C), initiated from the brominated sites of the P(nBA‐co‐BIEA)_x copolymer, produced branched or star‐branched poly(n‐butyl acrylate) (PnBA). Both types of polymerizations (NMP and SET‐LRP) exhibited features of a controlled polymerization with linear evolutions of logarithmic conversion versus time and number‐average molar masses versus conversion for final M_n superior to 80,000 g mol^?1. The branched and star‐branched architectures with high molar mass and low number of branches were fully characterized by size exclusion chromatography. The Mark–Houwink Sakurada relationship and the analysis of the contraction factor (g′ = ([η]_branched/[η]_linear)_M) confirmed the elaboration of complex PnBA. The zero‐shear viscosities of the linear, star‐shaped, branched, and star‐branched polymers were compared. The modeling of the rheological properties confirmed the synthesis of the branched architectures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Star‐shaped poly(L‐lactide)s with variable numbers of hydroxyl groups at polyester arms chain‐ends and directly attached to the star‐shaped core—Controlled synthesis and characterization

Star‐shaped poly(L ‐lactide)s (PLAs) bearing variable numbers of secondary hydroxyl groups at linear arms chain‐ends and primary hydroxyl groups directly attached to dipentaerithritol core (DPE) ((HO)_6?xDPE(PLA‐OH)_x, where x = 1–6) were prepared and then analyzed by means of size exclusion chromatography (SEC), ¹H NMR spectroscopy, MALDI‐TOF mass spectrometry, and eventually by Liquid Chromatography at Critical Conditions (LC‐CC). First, starting from DPE(OH)₆ a series of polyols with various number of hydroxyl groups has been obtained ((BnO)_6?xDPE(OH)_x, where Bn denotes benzyl moiety and x = 1–6). The living ring‐opening polymerization of L ‐lactide (LA) with (BnO)_6?xDPE(OH)_x/tin(II) octoate mixtures as initiating and catalytic system led to star‐shaped (BnO)_6?xDPE(PLA‐OH)_x polymers with molar masses (M_n) controlled by LA and DPE concentrations ratio in the feed. Finally, deprotection (via hydrogenation) gave a series of (HO)_6?xDPE(PLA‐OH)_x PLA's. SEC (with Multiangle Laser Light Scattering Detector (MALLS)), NMR, and MALDI‐TOF analyses confirmed the assumed structures and M_n's of the prepared (BnO)_6?xDPE(PLA‐OH)_x and (HO)_6?xDPE(PLA‐OH)_x PLA's. LC‐CC measurements revealed that for (BnO)_6?xDPE (PLA‐OH)_x series the elution volumes increase monotonically with the increasing number of –PLA‐OH arms in one macromolecule and are independent on the given PLA molar mass because of the critical conditions. Contrary to the polymers having the protected core hydroxyl groups, the elution volume for (HO)_6?xDPE(PLA‐OH)_x series decreases with the increasing number of ‐PLA‐OH arms reaching a minimum value for 4‐arm PLA and then slightly increases for 5‐ and 6‐arm PLA. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6116–6133, 2005     

Associative block copolymers comprising poly(N‐isopropylacrylamide) and poly(ethylene oxide) end‐functionalized with a fluorophilic or hydrophilic group. Synthesis and aqueous solution properties

A series of block copolymers comprising poly(N‐isopropylacrylamide) (PNIPAM) and poly(ethylene oxide) (PEO) end‐functionalized with a quaternary ammonium group (R_Q) was synthesized by free‐radical polymerization of N‐isopropylacrylamide with well‐defined R_QPEO macroazoinitiators. The radical termination occurred mainly by disproportionation, as confirmed by combining the data from size exclusion chromatography (SEC) and rheology measurements. The copolymers denoted R_QE_xN_y differ in type of the terminal group [F_Q = C₈F₁₇(CH₃)₂N⁺ or M_Q = (CH₃)₃N⁺] and in the length of the PEO (E_x; x = 4, 6, or 10 K) and PNIPAM (N_y; y = 7 or 17–19 K) blocks. The type of the terminal group determined the behavior of the block copolymers in the dilute and semidilute regime. Self‐assembled species formed by both F_Q and M_Q modified block copolymers were detected by static light scattering measurements at 25 °C and above the lower critical solution temperature (LCST). The LCST of the block copolymers depended on the type of the R_Q group and the length of the blocks. F_Q‐modified copolymers form elastic gels below and above the LCST. It was inferred that the F_Q groups and the PNIPAM blocks form segregated microdomains that serve as junctions to maintain a viscoelastic network. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5736–5744, 2004     

One‐pot inimer promoted ROCP synthesis of branched copolyesters using α‐hydroxy‐γ‐butyrolactone as the branching reagent

An array of branched poly(?‐caprolactone)s was successfully synthesized using an one‐pot inimer promoted ring‐opening multibranching copolymerization (ROCP) reaction. The biorenewable, commercially available yet unexploited comonomer and initiator 2‐hydroxy‐γ‐butyrolactone was chosen as the inimer to extend the use of 5‐membered lactones to branched structures and simultaneously avoiding the typical tedious work involved in the inimer preparation. Reactions were carried out both in bulk and in solution using stannous octoate (Sn(Oct)₂) as the catalyst. Polymerizations with inimer equivalents varying from 0.01 to 0.2 were conducted which resulted in polymers with a degree of branching ranging from 0.049 to 0.124. Detailed ROCP kinetics of different inimer systems were compared to illustrate the branch formation mechanism. The resulting polymer structures were confirmed by ¹H, ¹³C, and ₁H‐₁₃C HSQC NMR and SEC (RI detector and triple detectors). The thermal properties of polymers with different degree of branching were investigated by DSC, confirming the branch formation. Through this work, we have extended the current use of the non‐homopolymerizable γ‐butyrolactone to the branched polymers and thoroughly examined its behaviors in ROCP. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1908–1918     

Synthesis and characterization of model polybutadiene‐1,4‐b‐polydimethylsiloxane‐b‐polybutadiene‐1,4 copolymers

Model copolymers of poly(butadiene) (PB) and poly(dimethylsiloxane) (PDMS), PB‐b‐PDMS‐b‐PB, were synthesized by sequential anionic polymerization (high vacuum techniques) of 1,3‐butadiene and hexamethylciclotrisiloxane (D₃) on sec‐BuLi followed by chlorosilane‐coupling chemistry. The synthesized copolymers were characterized by nuclear magnetic resonance (¹H NMR), size‐exclusion chromatography (SEC), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). SEC and ¹H NMR results showed low polydispersity indexes (M_w/M_n) and variable siloxane compositions, whereas DSC and TGA experiments indicated that the thermal stability of the triblock copolymers depends on the PDMS composition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2726–2733, 2007     

Initiator efficiency of 2,2′‐azobis(isobutyronitrile) in bulk dodecyl acrylate free‐radical polymerizations over a wide conversion and molecular weight range

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(21) 5559 . The initiator efficiency, f, of 2,2′‐azobis(isobutyronitrile) (AIBN) in dodecyl acrylate (DA) bulk free‐radical polymerizations has been determined over a wide range of monomer conversion in high‐molecular‐weight regimes (M_n ? 10⁶ g mol^?1 [? 4160 units of DA)] with time‐dependent conversion data obtained via online Fourier transform near infrared spectroscopy (FTNIR) at 60 °C. In addition, the required initiator decomposition rate coefficient, k_d, was determined via online UV spectrometry and was found to be 8.4 · 10^?6 s^?1 (±0.5 · 10^?6 s^?1) in dodecane, n‐butyl acetate, and n‐dodecyl acetate at 60 °C. The initiator efficiency at low monomer conversions is relatively low (f = 0.13) and decreases with increasing monomer to polymer conversions. The evolution of f with monomer conversion (in high‐molecular‐weight regimes), x, at 60 °C can be summarized by the following functionality: f^{60 °C} (x) = 0.13–0.22 · x + 0.25 · x² (for x ≤ 0.45). The reported efficiency data are believed to have an error of >50%. The ratio of the initiator efficiency and the average termination rate coefficient, 〈k_t±, (f/〈k_t〉) has been determined at various molecular weights for the generated polydodecyl acrylate (M_n = 1900 g mol^?1 (? 8 units of DA) up to M_n = 36,500 g mol^?1 (? 152 units of DA). The (f/〈k_t〉) data may be indicative of a chain length‐dependent termination rate coefficient decreasing with (average) chain length. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5170–5179, 2004     

Synthesis of well‐defined AB20‐type star polymers with cyclodextrin‐core by combination of NMP and ATRP

The synthesis of an AB₂₀‐type heteroarm star polymer consisting of a polystyrene arm and 20‐arms of poly(methyl methacrylate) or poly(tert‐butyl acrylate) was carried out using the combination of nitroxide‐mediated polymerization (NMP) and atom transfer radical polymerization (ATRP). The NMP of styrene was carried out using mono‐6‐[4‐(1′‐(2″,2″,6″,6″‐tetramethyl‐1″‐piperidinyloxy)‐ethyl)benzamido]‐β‐cyclodextrin peracetate ( 1 ) to afford end‐functionalized polystyrene with an acetylated β‐cyclodextrin (β‐CyD) unit (prepolymer 2 ) with a number‐average molecular weight (M_n) of 11700 and a polydispersity (M_w/M_n) of 1.17. After deacetylation of prepolymer 2 , the resulting polymer was reacted with 2‐bromoisobutyric anhydride to give end‐functionalized polystyrene with 20(2‐bromoisobutyrol)s β‐CyD, macroinitiator 4 . The copper (I)‐mediated ATRP of methyl methacrylate (MMA) and tert‐butyl acrylate (tBA) was carried out using macroinitiator 4 . The resulting polymers were isolated by SEC fractionation to produce AB₂₀‐type star polymers with a β‐CyD‐core, 5 . The well‐defined structure of 5 with weight‐average molecular weight (M_w)s of 13,500–65,300 and M_w/M_n's of 1.26–1.28 was demonstrated by SEC and light scattering measurements. The arm polymers were separated from 5 by destruction with 28 wt % sodium methoxide in order to analyze the details of their characteristic structure. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4271–4279, 2005     

Synthesis of poly(glycerol)‐block‐poly(methyl acrylate) multi‐arm star polymers

Novel polyfunctional macroinitiators for atom transfer radical polymerization (ATRP) were obtained via esterification of hyperbranched polyglycerol (PG) (M_n = 4 770 g/mol, M_w/M_n = 1.5) with 2‐bromoisobutyryl bromide. Such macroinitiators were used in the presence of CuBr/pentamethyldiethylenetriamine (PMDETA) to initiate methyl acrylate (MA) polymerization, resulting in multi‐arm block copolymers with polyether core and 45–55 PMA arms. PMA arm length was controlled via monomer/initiator ratio and conversion (< 35%). Polymers were characterized by ¹H NMR, ¹³C NMR, SEC, membrane osmometry and DSC.     

Multibranched star-shaped polyethers

Synthesis of multibranched star-shaped polyethers having poly(ethylene oxide)s (PEO) arms is described. The novel method of preparing these multibranched macromolecules consists in reaction of the -OH ended oligomers with dicyclic compounds; e.g. monoalkyl ethers of poly(ethylene oxide) with diepoxides in the presence of a basic catalyst, converting a part of the ∼OH groups into ∼OC^σ end groups (alkoxide anions). Analysis of the structure of these macromolecules was mostly based on ¹H NMR, MALDI-TOF, and SEC with triple detection. The absolute values of M_w (LS), M_w/M_n, and [η] are given, indicating formation of macromolecules of high molar mass and highly branched. The number of branches was estimated by several methods, including comparison of the Mark-Houwink (M-H) dependencies of the obtained products with the M-H dependence for PEO stars with exactly known number of arms. The final stars were phosphorylated at the −OH ended branches. Almost exclusively monoesters of phosphoric acid were found in ³¹P (¹H) NMR.     

Core‐shell nanoparticles with hyperbranched poly(arylene‐oxindole) interiors

Core‐shell type star polymers composed of poly(tert‐butyl acrylate) (poly(t‐BuA)) arms and 100% hyperbranched poly(arylene‐oxindole) interiors were synthesized via the “core‐first” method. Atom transfer radical polymerization of t‐BuA initiated by 2‐bromopropionyl terminal groups of the hyperbranched core was applied for the synthesis of the stars. The resultant star structures were characterized by gel permeation chromatography with triple detection. Polymers of molar masses M_n up to 1.68 × 10⁵ g/mol were obtained. The obtained star polymers compared with the linear counterparts of the same molar mass have a much more compact structure in solution. The intrinsic viscosities of the stars are also significantly lower than their linear counterparts. Light scattering experiments were performed to provide information about the size of these macromolecules in solution. Preliminary characterization of the thermal properties of these novel materials is also reported. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1120–1135, 2009     

Determination of block size in poly(ethylene oxide)‐b‐polystyrene block copolymers by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry

Characterization of block size in poly(ethylene oxide)‐b‐poly(styrene) (PEO‐b‐PS) block copolymers could be achieved by matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF‐MS) after scission of the macromolecules into their constituent blocks. The performed hydrolytic cleavage was demonstrated to specifically occur on the targeted ester function in the junction group, yielding two homopolymers consisting of the constitutive initial blocks. This approach allows the use of well‐established MALDI protocols for a complete copolymer characterization while circumventing difficulties inherent to amphiphilic macromolecule ionization. Although the labile end‐group in PS homopolymer was modified by the MALDI process, PS block size could be determined from MS data since polymer chains were shown to remain intact during ionization. This methodology has been validated for a PEO‐b‐PS sample series, with two PEO of number average molecular weight (M_n) of 2000 and 5000 g mol^?1 and M_n(PS) ranging from 4000 to 21,000 g mol^?1. Weight average molecular weight (M_w), and thus polydispersity index, could also be reached for each segment and were consistent with values obtained by size exclusion chromatography. This approach is particularly valuable in the case of amphiphilic copolymers for which M_n values as determined by liquid state nuclear magnetic resonance might be affected by micelle formation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3380–3390, 2009     

Long‐chain branched ROMP polymers

This article describes the construction of branched ROMP‐polymer architectures via polycondensation of AB_n‐type macromonomers. For this convergent strategy, a polymer was synthesized that carries several hydroxyl‐groups along the polymer chain and one carboxylic acid group at the chain end. An esterification reaction between these functional groups yielded long‐chain branched polymers. The polymers were analyzed by NMR and SEC to monitor the condensation reaction. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Synthesis of sugar‐based macromolecules via sono‐ATRP in miniemulsion

Ultrasound‐mediated atom transfer radical polymerization (sono‐ATRP) in miniemulsion media is used for the first time for the preparation of complex macromolecular architectures by a facile two‐step synthetic route. Initially, esterification reaction of sucrose or lactulose with α‐bromoisobutyryl bromide (BriBBr) is conducted to receive multifunctional ATRP macroinitiators with 8 initiation sites, followed by polymerization of n‐butyl acrylate (BA) forming arms of the star‐like polymers. The brominated lactulose‐based molecule was examined as an ATRP initiator by determining the activation rate constant (k_a) of the catalytic process in the presence of a copper(II) bromide/tris(2‐pyridylmethyl)amine (Cu^IIBr₂/TPMA) catalyst in both organic solvent and for the first time in miniemulsion media, resulting in k_a = (1.03 ± 0.01) × 10⁴ M^?1 s^?1 and k_a = (1.16 ± 0.56) × 10³ M^?1 s^?1, respectively. Star‐like macromolecules with a sucrose or lactulose core and poly(n‐butyl acrylate) (PBA) arms were successfully received using different catalyst concentration. Linear kinetics and a well‐defined structure of synthesized polymers reflected by narrow molecular weight distribution (M_w/M_n = 1.46) indicated 105 ppm wt of catalyst loading as concentration to maintain controlled manner of polymerization process. ¹H NMR analysis confirms the formation of new sugar‐inspired star‐shaped polymers.     

An efficient avenue to poly(styrene)‐block‐poly(ε‐caprolactone) polymers via switching from RAFT to hydroxyl functionality: Synthesis and characterization

The recently introduced procedure of quantitatively switching thiocarbonyl thio capped (RAFT) polymers into hydroxyl terminated species was employed to generate narrow polydispersity (PDI ≈ 1.2) sulfur‐free poly(styrene)‐block‐poly(ε‐caprolactone) polymers (26,000 ≤ M_n/g·mol^?1 < 45,000). The ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) was conducted under organocatalysis employing 1,5,7‐triazabicyclo[4.4.0]dec‐5‐ene (TBD). The obtained block copolymers were thoroughly analyzed via size exclusion chromatography (SEC), NMR, as well as liquid adsorption chromatography under critical conditions coupled to SEC (LACCC‐SEC) to evidence the block copolymer structure and the efficiency of the synthetic process. The current contribution demonstrates that the RAFT process can serve as a methodology for the generation of sulfur‐free block copolymers via an efficient end group switch. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,characterization, and aqueous self‐assembly of amphiphilic poly(ethylene oxide)‐functionalized hyperbranched fluoropolymers

Complex amphiphilic polymers were synthesized via core‐first polymerization followed by alkylation‐based grafting of poly(ethylene oxide) (PEO). Inimer 1‐(4′‐(bromomethyl)benzyloxy)‐2,3,5,6‐tetrafluoro‐4‐vinylbenzene was synthesized and subjected to atom transfer radical self‐condensing vinyl polymerization to afford hyperbranched fluoropolymer (HBFP) as the hydrophobic core component with a number‐averaged molecular weight of 29 kDa and polydispersity index of 2.1. The alkyl halide chain ends on the HBFP were allowed to undergo reaction with monomethoxy‐terminated poly(ethylene oxide) amine (PEO_x‐NH₂) at different grafting numbers and PEO chain lengths to afford PEO‐functionalized HBFPs [(PEO_x)_y‐HBFPs], with x = 15 while y = 16, 22, or 29, x = 44 while y = 16, and x = 112 while y = 16. The amphiphilic, grafted block copolymers were found to aggregate in aqueous solution to give micelles with number‐averaged diameters (D_av) of 12–28 nm, as measured by transmission electron microscopy (TEM). An increase of the PEO:HBFP ratio, by increase in either the grafting densities (y values) or the chain lengths (x values), led to decreased TEM‐measured diameters. These complex, amphiphilic (PEO_x)_y‐HBFPs, with tunable sizes, might find potential applications as nanoscopic biomedical devices, such as drug delivery vehicles and ¹⁹F magnetic resonance imaging agents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3487–3496, 2010     

Cationic ring‐opening polymerization of trimethylene carbonate to α,ω‐dihydroxy telechelic and star‐shaped polycarbonates catalyzed by reusable o‐benzenedisulfonimide

Cationic ring‐opening polymerization of trimethylene carbonate using o‐benzenedisulfonimide as a reusable catalyst under mild conditions was described. The polymerization proceeded homogeneously without decarboxylation and poly(trimethylene carbonates) (PTMCs) were synthesized with well‐controlled molecular weights and narrow polydispersities (M_w/M_n = 1.12–1.18). The spectra of ¹H‐NMR, SEC, and MALDI–ToF MS clearly demonstrated the incorporation of the initiator residue into the polymer chains and the controlled/living nature of the polymerizations. Furthermore, the catalyst can be easily recovered, and its efficiency was fully retained. In addition, 1,3‐propanediol, 1,1,1‐trimethylolpropane, and pentaerythritol were successfully used as initiators to produce telechelic and star‐shaped polycarbonates which were determined by intrinsic viscosity experiments. The number of arms estimated by the shrinking factors ( ) were 2.0, 2.6, and 3.5, respectively, indicating the successful syntheses of the two‐, three‐, and four‐armed PTMCs. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 729–736     

pH‐Responsive ampholytic terpolymers of acrylamide,sodium 3‐acrylamido‐3‐methylbutanoate,and (3‐acrylamidopropyl)trimethylammonium chloride. I. Synthesis and characterization

Low-charge-density ampholytic terpolymers composed of acrylamide, sodium 3-acrylamido-3-methylbutanoate (NaAMB), and (3-acrylamidopropyl)trimethylammonium chloride were prepared via free-radical polymerization in 0.5 M NaCl to yield terpolymers with random charge distributions. NaOOCH was used as a chain-transfer agent during the polymerization to eliminate the effects of the monomer feed composition on the degree of polymerization (DP) and to suppress gel effects and broadening of the molecular weight distribution. The terpolymer compositions were obtained via ¹³C NMR spectroscopy, and the residual counterion content was determined via elemental analysis for Na⁺ and Cl⁻. The molecular weights (MWs) and polydispersity indices (PDIs) were determined via size exclusion chromatography/multi-angle laser light scattering (SEC–MALLS); the terpolymer MWs ranged from 1.3–1.6 × 10⁶ g/mol, corresponding to DPs of 1.6–1.9 × 10⁴ repeat units, with all terpolymers exhibiting PDIs of less than 2.0. Intrinsic viscosities determined from SEC–MALLS data and the Flory–Fox relationship were compared to intrinsic viscosities determined via low-shear dilute-solution viscometry and were found to agree rather well. Data from the SEC–MALLS analysis were used to analyze the radius of gyration/molecular weight (R_g–M) relationships and the Mark–Houwink–Sakurada intrinsic viscosity/molecular weight ([η]–M) relationships for the terpolymers. The R_g–M and [η]–M relationships revealed that most of the terpolymers exhibited little or no excluded volume effects under size exclusion chromatography conditions. Potentiometric titration of terpolymer solutions in deionized water showed that the apparent pK_a value of the poly[acrylamide-co-sodium 3-acrylamido-3-methylbutanoate-co-(3-acrylamidopropyl)trimethylammonium chloride] terpolymers increased with increasing NaAMB content in the terpolymers and increasing ratios of anionic monomer to cationic monomer at a constant terpolymer charge density. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3236–3251, 2004     

Novel,biodegradable, functional poly(ester‐carbonate)s by copolymerization of trans‐4‐hydroxy‐L‐proline with cyclic carbonate bearing a pendent carboxylic group

Water‐soluble poly(ester‐carbonate) having pendent amino and carboxylic groups on the main‐chain carbon is reported for the first time. This article describes the melt ring‐opening/condensation reaction of trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) with 5‐methyl‐5‐benzyloxycarbonyl‐1,3‐dioxan‐2‐one (MBC) at a wide range of molar fractions. The influence of reaction conditions such as catalyst concentration, polymerization time, and temperature on the number average molecular weight (M_n) and molecular weight distribution (M_w/M_n) of the copolymers was investigated. The polymerizations were carried out in bulk at 110 °C with 3 wt % stannous octoate as a catalyst for 16 h. The poly(ester‐carbonate)s obtained were characterized by Fourier transform infrared spectroscopy, ¹H NMR, differential scanning calorimetry, and gel permeation chromatography. The copolymers synthesized exhibited moderate molecular weights (M_n = 6000–14,700 g mol^?1) with reasonable molecular weight distributions (M_w/M_n = 1.11–2.23). The values of the glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of cyclic carbonate. When the MBC content decreased from 76 to 12 mol %, the T_g increased from 16 to 48 °C. The relationship between the poly(N‐CBz‐Hpr‐co‐MBC) T_g and the compositions was in approximation with the Fox equation. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐MBC)s was evaluated from weight‐loss measurements and the change of M_n and M_w/M_n. Debenzylation of 3 by catalytic hydrogenation led to the corresponding linear poly(ester‐carbonate), 4 , with pendent amino and carboxylic groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2303–2312, 2004     

Arborescent polystyrene‐graft‐poly(tert‐butyl methacrylate) copolymers: Synthesis and enhanced polyelectrolyte effect in solution

A technique is described for the preparation of arborescent graft copolymers containing poly(tert‐butyl methacrylate) (PtBMA) segments. For this purpose, tert‐butyl methacrylate is first polymerized with 1,1‐diphenyl‐2‐methylpentyllithium in tetrahydrofuran. The graft copolymers are obtained by addition of a solution of a bromomethylated polystyrene substrate to the living PtBMA macroanion solution. Copolymers incorporating either short (M_w ≈ 5000) or long (M_w ≈ 30,000) PtBMA side chains were prepared by grafting onto linear, comb‐branched (G0), G1, and G2 bromomethylated arborescent polystyrenes. Branching functionalities ranging from 9 to 4500 and molecular weights ranging from 8.8 × 10⁴ to 6.3 × 10⁷ were obtained for the copolymers, while maintaining a low apparent polydispersity index (M_w/M_n ≈ 1.14–1.25). Arborescent polystyrene‐graft‐poly(methacrylic acid) (PMAA) copolymers were obtained by hydrolysis of the tert‐butyl methacrylate units. Dynamic light scattering measurements showed that the arborescent PMAA copolymers are more expanded than their linear PMAA analogues when neutralized with NaOH. This effect is attributed to the higher charge density in the branched arborescent copolymer structures. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2335–2346, 2008