Anionic polymerization of methyl methacrylate by initiating systems based on lithium amides of various secondary amines

The anionic polymerization of methyl methacrylate in toluene at −78 °C with lithium amides of various secondary amines (diisopropylamine, N‐isopropylaniline, N‐n‐butylaniline, indoline, and N‐ethyl‐o‐toluidine) as initiators was studied. The tacticity of the resulting poly(methyl methacrylate)s (PMMAs) was dependent on the kind of secondary amine, and highly isotactic PMMAs (91–93% mm) were obtained when lithium amides of N‐isopropylaniline and N‐n‐butylaniline were employed. The isotacticity of the PMMAs further increased up to 98% mm with initiating systems composed of the lithium amides, n‐butyllithium, and transition‐metal halides (WCl₆, MoCl₅, and NbCl₅). © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4405–4411, 2005     

Anionic polymerization of methyl methacrylate initiated with late transition‐metal halides/organolithium/triisobutylaluminum systems

Anionic polymerization of methyl methacrylate (MMA) initiated with late transition‐metal halides [manganese chloride (MnCl₂), iron dichloride (FeCl₂), iron trichloride (FeCl₃), cobalt chloride (CoCl₂), or nickel bromide (NiBr₂)]/organolithium [nButyllithium (nBuLi) or phenyllithium (PhLi)]/triisobutylaluminum (iBu₃Al) systems is described. Except for the system with NiBr₂, the polymerizations of MMA afforded narrow molecular weight distribution poly(methyl methacrylate)s (PMMAs) with high molecular weights in quantitative yields at 0 °C in toluene. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) analyses of the PMMAs obtained by the systems with FeCl₂, FeCl₃, and CoCl₂ revealed that the polymers had hydrogen (H) at both chain ends. Accordingly, the reaction of the transition‐metal halides with the organolithium in the presence of iBu₃Al should result in the formation of transition‐metal hydride [M‐H]^? species, which was nucleophilic enough to initiate the MMA polymerization. Because the presence of a six‐membered cyclic structure resulting from backbiting was confirmed from the MALDI‐TOF MS analyses of the PMMA obtained with the metal halide (FeCl₂, FeCl₃, or CoCl₂)/organolithium systems in the absence of iBu₃Al, the introduction of H at the ω‐chain end indicated that iBu₃Al should prevent the backbiting. However, the MnCl₂/nBuLi/iBu₃Al initiating system gave PMMAs bearing H at the α chain end and six‐membered cyclic structure at the ω chain end. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1962–1977, 2003     

Anionic polymerization of methyl methacrylate initiated with molybdenum and tungsten chloride/organolithium/triisobutylaluminum systems

Molybdenum chloride (MoCl₅ or 1a ) and tungsten chloride (WCl₆ or 1b )/phenyllithium (PhLi)/triisobutylaluminum (iBu₃Al) systems were found to be quite effective for controlling the anionic polymerization of methyl methacrylate (MMA), affording high molecular weight poly(methyl methacrylate)s (PMMAs; number‐average molecular weight > 100,000) with narrow molecular weight distributions (weight‐average molecular weight/number‐average molecular weight < 1.25) quantitatively at 0 °C for 1 h in toluene. Matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry (MALDI‐TOF MS) analyses of PMMAs obtained with the 1a and 1b /organolithium (RM; n‐butyllithium, PhLi)/iBu₃Al systems revealed that the initiation of MMA with the systems occurred by a nucleophilic attack of H^? to the monomer. In addition, the MALDI‐TOF MS analyses indicated that the presence of iBu₃Al was responsible for the controlled polymerization by improving the uniformity of the polymerization with respect to initiation and termination and by preventing a backbiting reaction. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4302–4315, 2002     

End-functional poly(methyl methacrylate)s via group transfer polymerization

Hydroxyl-, amine-, and lactone-end-functional poly(methyl methacrylate)s (PMMA) were prepared with controlled molecular weights and M_w/M_n = 1.06–1.19 via group transfer polymerization. This was achieved by the electrophilic termination of silyl ketene acetal ended PMMAs with benzaldehyde, N-trimethylsilyl benzaldimine, and 5,6-dihydro-2H-pyran-2-one, respectively. The number-average degree of functionalization, as determined by NMR/SEC, was in the range of 0.70–0.85. A Lewis acid was used for terminating silyl ketene acetal ended PMMA with N-trimethylsilyl benzaldimine, whereas tetra-n-butyl ammonium bibenzoate was used in the case of benzaldehyde and 5,6-dihydro-2H-pyran-2-one. MALDI-TOF MS analysis of the end-functional polymers indicated the competing formation of cyclic end groups due to a back-biting reaction along with end-functional PMMAs. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2514–2531, 2007     

Synthesis of syndiotactic‐rich star‐shaped poly(methyl methacrylate) by core‐first group transfer polymerization using N‐(trimethylsilyl)bis(trifluoromethanesulfonyl)imide

The N‐(trimethylsilyl)bis(trifluoromethanesulfonyl)imide‐catalyzed (Me₃SiNTf₂‐catalyzed) group transfer polymerization (GTP) of methyl methacrylate (MMA) has been studied for synthesizing stereospecific star‐shaped poly(methyl methacrylate)s (PMMAs). The catalytic property of Me₃SiNTf₂ for the GTP of MMA using 1‐methoxy‐1‐trimethylsilyloxy‐2‐methyl‐propene as the initiator was confirmed by a kinetic investigation and matrix‐assisted laser desorption ionization time‐of‐flight mass spectrometry measurement. The initiating efficiency (f) of Me₃SiNTf₂ was 0.94–1.00, which was estimated by the value of M_n(calcd)/M_n(SEC). The Me₃SiNTf₂‐catalyzed GTP of MMA was carried out using initiators possessing three, four, and six MTS groups (MTS₃, MTS₄, and MTS₆, respectively) under the condition of [MMA]₀/[MTS₃, MTS₄, or MTS₆]₀ = 120 at ?55 °C. All the obtained PMMAs exhibited unimodal and narrow molecular weight distributions as M_w/M_ns = 1.03–1.04 and the M_w(MALS)s of the 3‐, 4‐, and 6‐armed star‐shaped PMMAs (PMMA₃, PMMA₄, and PMMA₆, respectively) were 12.9, 12.9, and 13.4 kgmol^?1, respectively, which fairly agreed with the calculated M_w(calcd) values. The syndiotacticities, rrs, of PMMA₃, PMMA₄, and PMMA₆ were in the range of 87–89%. The stereoblock synthesis of PMMA₃, PMMA₄, and PMMA₆ was performed by the first and second polymerizations at ?55 and 45 °C; the rrs of the first and second PMMA blocks were 87.0, 87.0, and 86.0% and 65.0, 65.0, and 64.0%, respectively. The glass transition temperatures (T_gs) were 118.1, 115.8, and 111.5 °C for the respective syndiotactic‐rich PMMA₃, PMMA₄, and PMMA₆ and 111.5, 109.7, and 107.6 °C for the respective stereoblock ones. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Dispersion polymerization of MMA in supercritical CO2 stabilized by random copolymers of 1H,1H–perfluorooctyl methacrylate and 2‐(dimethylaminoethyl methacrylate)

A series of random copolymers, composed of 1H,1H‐perfluorooctyl methacrylate (FOMA) and 2‐dimethylaminoethyl methacrylate (DMAEMA) were prepared as stabilizers for the dispersion polymerization of methyl methacrylate in supercritical CO₂ (scCO₂). Free‐flowing, spherical poly(methyl methacrylate) (PMMA) particles were produced in high yield by the effective stabilization of poly(FOMA‐co‐DMAEMA) containing 34–67 w/w % (15–41 m/m %) FOMA structural units. Less stabilized but micron‐sized discrete particles could be obtained even with 25 w/w % (10 m/m %) FOMA stabilizer. The result showed that the composition of copolymeric stabilizers had a dramatic effect on the size and morphology of PMMA. The particle size was controllable with the surfactant concentration. The effect of the monomer concentration and the initial pressure on the polymerization was also investigated. The dry polymer powder obtained from dispersion polymerization could be redispersed to form stable aqueous latexes in an acidic buffered solution (pH = 2.1) by an electrostatic stabilization mechanism due to the ionization of DMAEMA units in the stabilizer. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1365–1375, 2008     

Evolution of iron catalysts for effective living radical polymerization: P–N chelate ligand for enhancement of catalytic performances

Iron catalysts were evolved for more active transition metal‐catalyzed living radical polymerization through design of the ligands. In situ introduction of P–N chelate‐ligands, consisting of hetero‐coordinating atoms [phosphine (P) and nitrogene (N)], onto FeBr₂ effectively catalyzed living radical polymerization of methyl methacrylate (MMA) in conjunction with a bromide initiator, where the monomer‐conversion reached over 90% without dropping the rates and the molecular weights of obtained PMMAs were well controlled. The benign effects of the “hetero‐chelation” were demonstrated by comparative experiments with homo‐chelate ligands (P–P, N–N), model compounds of the composed coordination site, and the combinations. We successfully achieved an isolation of iron complex with a P–N ligand [FeBr₂(DMDPE); DMDPE: (R)‐N,N‐dimethyl‐1‐(2‐(diphenylphosphino)phenyl)‐ethanamine], which was superior to the conventional catalyst [FeBr₂(Pn‐Bu)₂] with respect to controllability and activity, especially at the latter stage. The catalyst was almost quantitatively removed by water washing after polymerization. It was also effective for living polymerization of styrene. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6819–6827, 2008     

Simultaneous control of the stereospecificity and molecular weight in the ruthenium‐catalyzed living radical polymerization of methyl and 2‐hydroxyethyl methacrylates and sequential synthesis of stereoblock polymers

The stereospecific living radical polymerizations of methyl methacrylate (MMA) and 2‐hydroxyethyl methacrylate (HEMA) were achieved with a combination of ruthenium‐catalyzed living radical and solvent‐mediated stereospecific radical polymerizations. Among a series of ruthenium complexes [RuCl₂(PPh₃)₃, Ru(Ind)Cl(PPh₃)₂, and RuCp*Cl(PPh₃)₂], Cp*–ruthenium afforded poly(methyl methacrylate) with highly controlled molecular weights [weight‐average molecular weight/number‐average molecular weight (M_w/M_n) = 1.08] and high syndiotacticity (r = 88%) in a fluoroalcohol such as (CF₃)₂C(Ph)OH at 0 °C. On the other hand, a hydroxy‐functionalized monomer, HEMA, was polymerized with RuCp*Cl(PPh₃)₂ in N,N‐dimethylformamide and N,N‐dimethylacetamide (DMA) to give syndiotactic polymers (r = 87–88%) with controlled molecular weights (M_w/M_n = 1.12–1.16). This was the first example of the syndiospecific living radical polymerization of HEMA. A fluoroalcohol [(CF₃)₂C(Ph)OH], which induced the syndiospecific radical polymerization of MMA, reduced the syndiospecificity in the HEMA polymerization to result in more or less atactic polymers (mm/mr/rr = 7.2/40.9/51.9%) with controlled molecular weights in the presence of RuCp*Cl(PPh₃)₂ at 80 °C. A successive living radical polymerization of HEMA in two solvents, first DMA followed by (CF₃)₂C(Ph)OH, resulted in stereoblock poly(2‐hydroxyethyl methacrylate) with syndiotactic–atactic segments. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3609–3615, 2006     

Radical polymerization in the presence of peroxide and reducing agent monomer for branched polymers

In this article, we report the radical polymerization in the presence of peroxide and commercially available or designed reducing agent monomer (RAM) for the preparation of branched poly(methyl methacrylate)s (PMMAs). The reaction behavior of the RAM was studied by NMR. Triple‐detection SEC (TD‐SEC) analysis was used to confirm the branching structure of the prepared PMMAs and to investigate the influence of peroxide concentration and RAM concentration on molecular weight and branched structure. The obtained branched PMMAs exhibited high molecular weights and relatively narrow polydispersities at high conversion of MMA. Interestingly, a significant increase in molecular weight and degree of branching of the obtained polymers are observed in higher BPO concentration, these results are quite different from that reported in the literature. The unique radical polymerization mechanism in the RAM/BPO redox‐initiated radical polymerization system resulted in branched PMMAs with high molecular weights at relatively high RAM and BPO concentrations. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 833–840     

Unbridged bivalent lanthanidocenes for isotactic and stereomultiblock polymerization of methyl methacrylate

Bivalent organolanthanides with unbridged substituted indenyl or fluorenyl ligands (1-SiMe₃Ind)₂YTHF ( I ), (9-SiMe₃Flu)₂YTHF ( II ), were found to efficiently catalyze the stereoregular polymerization of methyl methacrylate. The microstructure of resultant polymers was shown to be dependent of a conformation that the ligands adopt at the polymerization temperature. The formation of isotactic rich PMMAs from complex II was proposed to be associated with the fluctuation of the 9-trimethylsilylfluorenyls around a C₂ symmetric twisted-conformation. The formation of the multi(syndioPMMA-block-iso-PMMA) polymers from the mixture of rac- and meso-isomers of I was rationalized on the basis of competing conjugate addition and inversion of the metallocene conformation. Surprisingly, both rac- and meso-isomers of I were found to operate with similar activity and stereospecifity, although the stereospecific operation of the meso-form was not completely understandable. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1599–1606, 1998     

Iron‐mediated AGET ATRP of MMA with sulfosalicylic acid as a ligand

Iron‐mediated atom transfer radical polymerizations with activators generated by electron transfer of methyl methacrylate in N,N‐dimethylformamide solution in the presence and absence of a limited amount of air, using FeCl₃·6H₂O as the catalyst, ethyl 2‐bromoisobutyrate (EBiB) as the initiator, vitamin C as the reducing agent, and a commercially available organic acid, sulfosalicylic acid (SSA), as the ligand were investigated. Addition of SSA as the ligand could enhance the polymerization rate, and produce poly(methyl methacrylate) with controllable molecular weights and narrow molecular weight distributions (M_w/M_n = 1.30–1.50). The effect of [FeCl₃·6H₂O]₀/[SSA]₀ on the polymerization was studied by cyclic voltammetry characterization. Chain extension was performed to confirm the “living”/controlled nature of the polymerization system. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis of amphiphilic poly(methyl methacrylate‐ b‐ethylene oxide) copolymers from monohydroxy telechelic poly(methyl methacrylate) as macroinitiator

The synthesis of well‐defined poly(methyl methacrylate)‐block‐poly(ethylene oxide) (PMMA‐b‐PEO) dibock copolymer through anionic polymerization using monohydroxy telechelic PMMA as macroinitiator is described. Living anionic polymerization of methyl methacrylate was performed using initiators derived from the adduct of diphenylethylene and a suitable alkyllithium, either of which contains a hydroxyl group protected with tert‐butyldimethylsilyl moiety in tetrahydrofuran (THF) at ?78 °C in the presence of LiClO₄. The synthesized telechelic PMMAs had good control of molecular weight with narrow molecular weight distribution (MWD). The ¹H NMR and MALDI‐TOF MS analysis confirmed quantitative functionalization of chain‐ends. Block copolymerization of ethylene oxide was carried out using the terminal hydroxyl group of PMMA as initiator in the presence of potassium counter ion in THF at 35 °C. The PMMA‐b‐PEO diblock copolymers had moderate control of molecular weight with narrow MWD. The ¹H NMR results confirm the absence of trans‐esterification reaction of propagating PEO anions onto the ester pendants of PMMA. The micellation behavior of PMMA‐b‐PEO diblock copolymer was examined in water using ¹H NMR and dynamic light scattering. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 2132–2144, 2008     

Atom transfer radical polymerization of methyl methacrylate catalyzed by ion exchange resin immobilized Co(II) hybrid catalyst

Ion exchange resin immobilized Co(II) catalyst with a small amount of soluble CuCl₂/Me₆TREN catalyst was successfully applied to atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) in DMF. Using this catalyst, a high conversion of MMA (>90%) was achieved. And poly(methyl methacrylate) (PMMA) with predicted molecular weight and narrow molecular weight distribution (M_w/M_n = 1.09–1.42) was obtained. The immobilized catalyst can be easily separated from the polymerization system by simple centrifugation after polymerization, resulting in the concentration of transition metal residues in polymer product was as low as 10 ppm. Both main catalytic activity and good controllability over the polymerization were retained by the recycled catalyst without any regeneration process. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1416–1426, 2008     

Effect of tacticity on permeation properties of poly(methyl methacrylate)

The effect of stereoregularity on gas permeation properties of poly(methyl methacrylate) (PMMA) was investigated. The gas permeability coefficients for He, H₂, O₂, N₂, Ar, CH₄, and CO₂ at 35°C near atmospheric pressure have been measured for three different PMMAs. Apparent diffusion and solubility coefficients were obtained from time lag data, and these were compared with data for a commercial PMMA previously reported. The permeability, solubility, and diffusion coefficients increase as the content of syndiotactic sequences increases. These observations are consistent with more dense packing of the isotactic form in the glassy state that stems in part from its lower glass transition temperature. The transport behavior for a 50:50 isotactic/syndiotactic blend was also studied. These so-called stereocomplexes exhibit permeation behavior comparable to other weakly interacting miscible blend systems.     

Amino alcohol additives for the fast living radical polymerization of methyl methacrylate with RuCl2(PPh3)3

A series of amino alcohols [e.g., R₂N (CH₂)_n OH (R = Me, Et, etc.; n = 2, 3, or 4)] were examined as additives for rate enhancement and finer reaction control in the living radical polymerization of methyl methacrylate with RuCl₂(PPh₃)₃. In general, these additives were more effective in acceleration than the corresponding amines as well as mixtures of an amine and a nonsubstituted alcohol, diamines, or diols. For example, 2-(diethylamino)ethanol significantly accelerated the polymerization (23 h, 91% at 60 °C) and gave polymers with narrower molecular weight distributions [weight-average molecular weight/number-average molecular weight (M_w/M_n) = 1.23], with respect to the system without the additive (550 h, 95%, M_w/M_n ∼ 2.0 at 80 °C; no polymerization at 60 °C). ¹H NMR analysis showed the interaction between the amino alcohols and RuCl₂(PPh₃)₃, which apparently formed a more active catalyst. Amino alcohols were also effective in Ru(Ind)Cl(PPh₃)₂-catalyzed systems (96% in 8 h at 80 °C). High-molecular-weight poly(methyl methacrylate) (M_n ∼ 1.1 × 10⁵) was synthesized with the RuCl₂(PPh₃)₃/2-(diethylamino)ethanol system, in which the polymerization reached 97% conversion in 4 h. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3597–3605, 2003     

Iron‐mediated AGET ATRP of methyl methacrylate in the presence of polar solvents as ligands

The polar solvents, N‐methylpyrrolidone (NMP), N,N‐dimethylformamide (DMF), and acetonitrile (CH₃CN) were used as ligands for iron(III)‐mediated activators generated by electron transfer atom transfer radical polymerizations (AGET ATRPs) of methyl methacrylate (MMA) with various initiators and reducing agents. Polymerizations were conducted with a molar ratio of [MMA]₀/[initiator]₀/[FeBr₃]₀/[reducing agent]₀ = 100:1:1:0.5 and a volume ratio of MMA/solvent = 2:1 at 60 °C to investigate the effects of initiator, solvent and reducing agent, and most of the systems showed the typical features of “living”/controlled radical polymerization. In order to get a deeper understanding of the mechanism, the amount of the reducing agent was changed to study the polymerization behavior. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1020–1027     

Electroactive methacrylate‐based triblock copolymer elastomer for actuator application

A series of ABA triblock copolymers of methyl methacrylate (MMA) and dodecyl methacrylate (DMA) [poly(MMA‐b‐DMA‐b‐MMA)] (PMDM) were synthesized by Ru‐based sequential living radical polymerization. For this, DMA was first polymerized from a difunctional initiator, ethane‐1,2‐diyl bis(2‐chloro‐2‐phenylacetate) with combination of RuCl₂(PPh₃)₃ catalyst and nBu₃N additive in toluene at 80 °C. As the conversion of DMA reached over about 90%, MMA was directly added into the reaction solution to give PMDM with controlled molecular weight (M_w/M_n ≤ 1.2). These triblock copolymers showed well‐organized morphologies such as body centered cubic, hexagonal cylinder, and lamella structures both in bulk and in thin film by self‐assembly phenomenon with different poly(methyl methacrylate) (PMMA) weight fractions. Obtained PMDMs with 20–40 wt % of the PMMA segments showed excellent electroactive actuation behaviors at relatively low voltages, which was much superior compared to conventional styrene‐ethylene‐butylene‐styrene triblock copolymer systems due to its higher polarity derived from the methacrylate backbone and lower modulus. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Stereocontrol during the free‐radical polymerization of methacrylates with Lewis acids

The free‐radical polymerizations of methyl methacrylate (MMA), ethyl methacrylate, isopropyl methacrylate, and 2‐methoxyethyl methacrylate were carried out in the presence of various Lewis acids. The MMA polymerization in the presence of scandium trifluoromethanesulfonate [Sc(OTf)₃] in toluene or CHCl₃ produced a polymer with a higher isotacticity and heterotacticity than that produced in the absence of Sc(OTf)₃. Similar effects were observed during the polymerization of the other monomers. ScCl₃, Yb(OTf)₃, Er(OTf)₃, HfCl₄, HfBr₄, and In(OTf)₃ also increased the isotacticity and heterotacticity of the polymers. The effects of the Lewis acids were greater in a solvent with a lower polarity and were negligible in tetrahydrofuran and N,N‐dimethylformamide. Sc(OTf)₃ was also found to accelerate the polymerization of MMA. On the basis of an NMR analysis of a mixture of Sc(OTf)₃, MMA, and poly(methyl methacrylate), the monomer–Sc(OTf)₃ interaction seems to be involved in the stereochemical mechanism of the polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1463–1471, 2001     

Stereoregular uniform polymers

Progress in stereospecific living polymerizations of methacrylate monomers and the concept and realization of “uniform polymers” and “uniform polymer architectures” are described, with particular emphasis on the fusion of polymer synthesis and characterization and their interactive stimulation, which are inevitable not only for the formation of polymers with highly controlled structures but also for the development of polymer characterization, thereby bringing about the spiral progress of both fields. First, three types of stereospecific living polymerizations are described, including formation of 100% isotactic poly(methyl methacrylate) (PMMA), 98% syndiotactic PMMA, and 96% heterotactic PMMA. Supercritical fluid chromatography (SFC) has proven useful for isolating uniform polymers from these stereoregular PMMAs with narrow molecular weight distributions. Living nature of these stereospecific polymerizations is further utilized for the synthesis of end‐functionalized stereoregular polymers, which are separated into uniform end‐functionalized polymers and used to construct more elaborated uniform polymer architectures such as stereoblock, star, and comb polymers. The uniform polymers have proven quite useful for the studies on the relationship between structures and properties such as glass transition temperature, melting temperature, and solution viscosity. In addition to this, stereoregular uniform polymers are particularly important to understand stereocomplex formation between isotactic and syndiotactic uniform PMMAs. On‐line GPC/NMR measurement at 750 MHz and −15°C in acetone/acetone‐d₆ allowed definitive determination of the compositions of the complexed species and noncomplexed species separately, but not in average. Also interesting is the stereocomplex formation of uniform stereoblock PMMA, where intramolecular complexation in addition to an intermolecular complexation was distinctively observed by GPC analysis in acetone. Uniform star and comb PMMAs were also prepared and found useful to discuss the effect of branching on the solution viscosity. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 245–260, 1999     

Highly active methyl methacrylate polymerization catalysts obtained from bis(3,5‐dinitro‐salicylaldiminate)nickel(II) complexes and methylaluminoxane

The homopolymerization of methyl methacrylate was investigated with bis(salicylaldiminate)nickel(II) complexes, such as bis[3,5‐dinitro‐N(2,6‐diisopropylphenyl)salicylaldiminate]nickel(II) ( IIIa ) and bis[3,5‐dinitro‐N(phenyl)salicylaldiminate]nickel(II) ( IIIb ), and with methylaluminoxane (MAO) as an activator. In particular, the effect of the Al/Ni molar ratio on the catalytic activity and on the properties of the resulting poly(methyl methacrylate) (PMMA) was checked. The maximum activity was ascertained when an Al/Ni molar ratio equal to about 100 was used. However, the productivity of the catalytic systems was rather low. When the IIIa /MAO catalytic system was prepared under an ethylene atmosphere, an extremely high activity was observed, a productivity value of up to around 150,000 g of PMMA/(mol of Ni × h) being obtained, the highest ever found with nickel‐based catalysts. No appreciable presence of ethylene counits in the polymeric products was also ascertained. When the IIIb /MAO system was used, similar results were found, and high molecular weight PMMAs were obtained, despite the absence of bulky isopropyl substituents in positions ortho and ortho′ to the N‐aryl moiety of the salicylaldiminate ligand. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2117–2124, 2003