Synthesis of a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines,SG1‐CH(Me)CO2R,and measurement of the homolysis rate constants of the C?ON bond

During nitroxide‐mediated polymerization, the polymerization time decreases with an increasing rate constant of the cleavage of the NO? C bond of dormant alkoxyamines. Thus, knowledge of the factors influencing this cleavage is of considerable interest. We have prepared a series of SG1 2‐[N‐tert‐butyl‐N‐(1‐diethoxyphosphoryl‐2,2‐dimethylpropyl)aminoxyl] based alkoxyamines [SG1‐CH(Me)CO₂R] with various R groups (alkyl or aryl) and measured the homolysis rate constants (k_d). k_d decreases with the bulkiness and increases with the polarity of the R group. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3504–3515, 2004     

Ellipsometry study of the photo‐oxidation of poly[(2‐methoxy‐5‐hexyloxy)‐ p‐phenylenevinylene]

Poly(p‐phenylenevinylene) (PPV) and its derivatives exhibit strong luminescence, being serious candidates to be used as active layers in organic light‐emitting diodes. However, the structural degradation caused by photo‐oxidation is an obstacle for commercial applications of such materials. Here, we show that spectroscopy ellipsometry is a useful technique to investigate the photo‐oxidation of poly[(2‐methoxy‐5‐hexyloxy)‐p‐phenylenevinylene] (MH‐PPV), a PPV derivative, which emits a red color light. Spectroscopy ellipsometry enables determination of the complex dielectric function—?*(E)—of MH‐PPV thin‐layer films exposed to air, in the 2.1–4.2 eV energy range, as a function of the light exposure time (t_e). By using the Lorentz model to fit the experimental ?*(E) curves, it was inferred that the interactions among polymeric chains increase with t_e. From ?*(E), it is also possible to obtain the complex refractive index, N*(E) = n + ik. At higher energies (where k ? n), n increases from 1.32 to 1.40 with the photo‐oxidation progress. The behavior of n was investigated by using the Lorenz–Lorentz equation, taking into account the contribution for n by the chromophores of MH‐PPV. The effect of photo‐oxidation, mainly due to the replacement of vinyl C?C by the ketone C?O bonds, is confirmed by Fourier transform infrared measurements, an effect that reduces the average effective polymer conjugation length. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1033–1041, 2004     

Kinetic analysis of styrene atom transfer radical polymerization: Extraction of radical‐radical termination rate coefficients

Kinetic studies of the atom transfer radical polymerization (ATRP) of styrene are reported, with the particular aim of determining radical‐radical termination rate coefficients (<k_t>). The reactions are analyzed using the persistent radical effect (PRE) model. Using this model, average radical‐radical termination rate coefficients are evaluated. Under appropriate ATRP catalyst concentrations, <k_t> values of approximately 2 × 10⁸ L mol^?1 s^?1 at 110 °C in 50 vol % anisole were determined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5548–5558, 2004     

Addition–fragmentation chain transfer: Molecular weight distributions and retardation in the system methyl methacrylate/methyl α‐(bromomethyl)acrylate

A detailed investigation of addition–fragmentation chain transfer (AFCT) in the free‐radical polymerization of methyl methacrylate (MMA) in the presence of methyl α‐(bromomethyl)acrylate (MBMA) was carried out to elucidate mechanistic details with efficient macromonomer synthesis as an underlying goal. Advanced modeling techniques were used in connection with the experimental work. Curve fitting of simulated and experimental molecular weight distributions with respect to the rate coefficient for addition of propagating radicals to MBMA (k_add) over 60–120 °C resulted in E_add = 21.7 kJ mol^?1 and A_add = 2.18 × 10⁶ M^?1 s^?1 and a very weak temperature dependence of the chain‐transfer constant (E_add ≈ E_p). The rate coefficient for fragmentation of adduct radicals at 60 °C was estimated as k_f ≈ 39 s^?1 on the basis of experimental data of the MMA conversion and the concentration of 2‐carbomethoxy‐2‐propenyl end groups. The approach developed is generic and can be applied to any AFCT system in which copolymerization does not occur and in which the resulting unsaturated end groups do not undergo further reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2640–2650, 2004     

Solvation effect in the thermal decomposition of 2,2′‐azoisobutyronitrile in the three‐component system

The thermal decomposition rate constant (k_d ) of 2,2′‐azoisobutyronitrile in acrylonitrile (AN; monomer A)–methyl methacrylate (MM; monomer B) comonomer mixtures in N,N‐dimethylformamide (DMF) as a function of the comonomer mixture composition and its concentration in the solvent at 60 °C was studied. The dependences k_d = f(x_A ,C) [x_A (mole fraction of A in the comonomer mixture) = A/(A + B) = A/C, where C is the comonomer mixture concentration] have a different course as a function of C: from a curve k_d = f(x_A ) approaching the straight line (C = 2 mol · dm⁻³) to a convex curve possessing a maximum at a point x_A = 0.7 (C = 4 mol · dm⁻³) to a curve with a flattened wide maximum within the range of x_A = 0.2–0.8 (C = 7 mol · dm⁻³) to a curve with the shape of a lying s (C = 9 mol · dm⁻³). All the courses of the experimental dependences k_d = f(x_A ,C) can be explained with a hypothesis of initiator solvation by the comonomers AN and MM and the solvent DMF. The existing solvated forms, their relative stability constants, the thermal decomposition rate constants, and the relative contents in the system were determined. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2156–2166, 2000     

Influence of the stereochemical configuration on the radical polymerization of methacrylic monomers: cis‐ and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate

The synthesis of two new isomeric monomers, cis‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (CCDM) and trans‐(2‐cyclohexyl‐1,3‐dioxan‐5‐yl) methacrylate (TCDM), starting from the reaction of glycerol and cyclohexanecarbaldehyde, is reported. The process involved the preparation of different alcohol acetals and esterification with methacryloyl chloride of the corresponding cis and trans 5‐hydroxy compounds of 2‐cyclohexyl‐1,3‐dioxane. The radical polymerization reactions of both monomers, under the same conditions of temperature, solvent, monomer, and initiator concentrations, were studied to investigate the influence of the monomer configuration on the values of the propagation and termination rate constants (k_p and k_t ).The values of the ratio k_p /k_t ^1/2 were determined by UV spectroscopy by the measurement of the changes of absorbance with time at several wavelengths in the range 275–285 nm, where an appropriate change in absorbance was observed. Reliable values of the kinetics constants were determined by UV spectroscopy, showing a very good reproducibility of the kinetic experiments. The values of k_p /k_t ^1/2, in the temperature interval 45–65 °C, lay in the range 0.40–0.50 L^1/2/mol^1/2s^1/2 and 0.20–0.30 L^1/2/mol^1/2s^1/2 for CCDM and TCDM, respectively. Measurements of both the radical concentrations and the absolute rate constants k_p and k_t were also carried out with electron paramagnetic resonance techniques. The values of k_p at 60 °C were nearly identical for both the trans and cis monomers, but the termination rate constant of the trans monomer was about three times that of the cis monomer at the same temperature. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3883–3891, 2000     

Synthesis of reactive three‐arm star‐shaped oligoimides with narrow molecular weight distribution

Series of star‐shaped three arms oligoimides (SOI) with terminal amino groups with narrow MWD ((M_w/M_n = 1.1–2) was synthesized by the one‐stage high‐temperature polycondensation in molten benzoic acid at 140 °C. The (B3+AB′) approach with the “slow addition of monomer” method was used for this synthesis, where B3 is 2,4,6‐tris(4‐aminophenoxy)toluene and AB′ is 3‐aminophenoxy phthalic acid. The SOI arm's length was controlled by the AB′/B3 mole ratio of 10:1, 20:1, 40:1, and 100:1. By the reaction of SOI's terminal amino groups with acetic anhydride, corresponding acetamide derivatives were obtained. SOI synthesized are soluble in selected organic solvents. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2004–2009     

Radical‐initiated polymerization of β‐methyl‐α‐methylene‐γ‐butyrolactone

β‐Methyl‐α‐methylene‐γ‐butyrolactone (MMBL) was synthesized and then was polymerized in an N,N‐dimethylformamide (DMF) solution with 2,2‐azobisisobutyronitrile (AIBN) initiation. The homopolymer of MMBL was soluble in DMF and acetonitrile. MMBL was homopolymerized without competing depolymerization from 50 to 70 °C. The rate of polymerization (R_p) for MMBL followed the kinetic expression R_p = [AIBN]^0.54[MMBL]^1.04. The overall activation energy was calculated to be 86.9 kJ/mol, k_p/k_t^1/2 was equal to 0.050 (where k_p is the rate constant for propagation and k_t is the rate constant for termination), and the rate of initiation was 2.17 × 10^?8 mol L^?1 s^?1. The free energy of activation, the activation enthalpy, and the activation entropy were 106.0, 84.1, and 0.0658 kJ mol^?1, respectively, for homopolymerization. The initiation efficiency was approximately 1. Styrene and MMBL were copolymerized in DMF solutions at 60 °C with AIBN as the initiator. The reactivity ratios (r₁ = 0.22 and r₂ = 0.73) for this copolymerization were calculated with the Kelen–Tudos method. The general reactivity parameter Q and the polarity parameter e for MMBL were calculated to be 1.54 and 0.55, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1759–1777, 2003     

Electric‐field‐induced molecular alignment of side‐chain liquid‐crystalline polyacetylenes containing biphenyl mesogens

Electric‐field‐induced molecular alignments of side‐chain liquid‐crystalline polyacetylenes [? {HC?C[(CH₂)_mOCO‐biph‐OC₇H₁₅]}? , where biph is 4,4′‐biphenylyl and m is 3 (PA3EO7) or 9 (PA9EO7)] were studied with X‐ray diffraction and polarized optical microscopy. An orientation as high as 0.84 was obtained for PA9EO7. Furthermore, the molecular orientation of PA9EO7 was achieved within a temperature range between the isotropic‐to‐smectic A transition temperature and 115 °C, and this suggested that the orientational packing was affected by the thermal fluctuation of the isotropic liquid and the mobility of the mesogenic moieties. The maximum achievable orientation for PA9EO7 was much greater than that for PA3EO7. This was the first time that the electric‐field‐induced molecular orientation of a side‐chain liquid‐crystalline polymer with a stiff backbone was studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1333–1341, 2004     

Collapse and swelling of poly(N‐isopropylacrylamide‐co‐sodium acrylate) copolymer brushes grafted on a flat SiO2 surface

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) copolymer brushes grafted on SiO₂‐coated quartz crystal surface were prepared with a surface‐immobilized initiator. The collapse and swelling of the thermally sensitive copolymer brushes in water were studied with quartz crystal microbalance in situ. The frequency and dissipation changes with the temperature increasing in the range 20–38 °C indicate that the brushes undergo a continuous collapse transition. Our results show that the copolymer brushes collapse to a state where the brushes were prepared. A hysteresis was observed in the cooling process. Fourier transform infrared (FTIR) results revealed that the formation of some additional hydrogen bonds within the copolymer chains at their collapsed state is responsible for the hysteresis. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 770–778, 2006     

Network structure and swelling–shrinking behaviors of pH‐sensitive poly(acrylamide‐co‐itaconic acid) hydrogels

pH‐sensitive poly(acrylamide‐co‐itaconic acid) [P(AAm/IA)] hydrogels were prepared by radiation induced copolymerization of acrylamide (AAm) and itaconic acid (IA) at various ratios. Swelling and shrinking behaviors of these hydrogels were found greatly dependent on the composition of the hydrogel and pH of the buffer solution. The basic structural parameters of the P(AAm/IA) networks such as the molecular weight between crosslinks (M _c) and polymer–solvent interaction parameter (χ) were also determined using the modified Flory‐Rehner equations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2586–2594, 2004     

Synthesis,complex formation,and dilute‐solution associative behavior of linear poly(methacrylic acid)‐graft‐poly(2‐ethyl‐2‐oxazoline)*

Poly(methacrylic acid) (PMA) and poly(2‐ethyl‐2‐oxazoline) (PEOZO) are a polyacid/polybase pair capable of forming reversible, pH‐responsive, hydrogen‐bonding complexes stabilized by hydrophobic effects in aqueous media. Linear PMA was modified with long‐chain (number‐average molecular weight: 10,000) PEOZO via statistical coupling reactions in organic media to prepare a series of PMA‐graft‐PEOZO copolymers. Potentiometric titrations revealed that the presence of tethered PEOZO markedly increases the pK_a values for PMA‐g‐PEOZO copolymers as compared with simple PMA/PEOZO mixtures at degrees of ionization, α, between 0.0 and 0.1. The dilute‐solution PMA–PEOZO intramolecular association has been probed by monitoring the PEOZO NMR spin–spin (T₂) relaxation as a function of pH. Covalently attached PEOZO side chains participate in complexation at higher values of α than untethered PEOZO. Surprisingly, most PEOZO side chains did not take part in hydrogen bonding at low α, and the highest level of PEOZO incorporation induced a decrease in the number of PMA/PEOZO hydrogen bonds. The polymer self‐diffusion as a function of α was measured with dynamic light scattering. At low pH, the copolymers had no charge and they were in a collapsed form. At high pH, the expected conformational expansion of the PMA units was enhanced at moderate levels of PEOZO incorporation. However, the highest PEOZO incorporation induced the onset of intramolecular associations between PEOZO units along the copolymer chains. Low shear rheometry and light scattering measurements were used in conjunction with the T₂ NMR measurements to propose a model consistent with the aforementioned behavior. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2520–2533, 2004     

Blends of fatty‐acid‐modified dendrimers with polyolefins

Blends were made by solution and melt‐mixing fatty‐acid‐modified dendrimers with various polyolefins. Small‐angle neutron scattering (SANS) was used to determine the miscibility of the blends. Poly(propylene imine) (PPI) dendrimers G1, G3, and G5 [DAB‐dendr‐(NH₂)_y] with y = 4, 16, and 64, were reacted with stearic acid or stearic acid‐d₃₅ forming amide bonds. The modified dendrimers were then blended with high‐density polyethylene (HDPE), high‐density polyethylene‐d₄ (HDPE‐d₄), low‐density polyethylene (LDPE), amorphous polypropylene (PP), or an ethylene–butylene copolymer (E‐co‐B). Limiting power law behavior shows that all of the blends are immiscible. It is likely that the dendrimers form a second phase, being finely dispersed, but thermodynamically immiscible. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 95–100, 2000     

Multicyclic polyethers derived from 1,1,1‐tris(4‐hydroxyphenyl)ethane and 2,6‐dihalopyridines

Poly(pyridine ether)s were prepared in two ways: the polycondensation of silylated 1,1,1‐tris(4‐hydroxyphenyl)ethane (THPE) with 2,6‐difluoropyridine (method A) and the polycondensation of free THPE with 2,6‐dichloropyridine (method B). With method A, the THPE/difluoropyridine feed ratio was varied from 1.0:1.0 to 1.0:1.6. Cycles, bicycles, and multicycles were the main reaction products, and crosslinking was never observed. When ideal stoichiometry was used exclusively, multicycles free of functional groups were obtained. These multicycles were detectable in matrix‐assisted laser desorption/ionization time‐of‐flight (MALDI‐TOF) mass spectra up to B₃₈C₇₆ with a mass of approximately 32,000 Da. With method B, the reaction conditions were varied at a fixed feed ratio to achieve an optimum for the preparation of multicyclic polyethers, but because of the lower reactivity of 2,6‐dichloropyridine, a quantitative conversion was not achieved. The reaction products were characterized with MALDI‐TOF mass spectrometry, viscosity measurements, and size exclusion chromatography. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5725–5735, 2004     

Initiator efficiency of 2,2′‐azobis(isobutyronitrile) in bulk dodecyl acrylate free‐radical polymerizations over a wide conversion and molecular weight range

An Erratum has been published for this article in J. Polym. Sci. Part A: Polym. Chem. (2004) 42(21) 5559 . The initiator efficiency, f, of 2,2′‐azobis(isobutyronitrile) (AIBN) in dodecyl acrylate (DA) bulk free‐radical polymerizations has been determined over a wide range of monomer conversion in high‐molecular‐weight regimes (M_n ? 10⁶ g mol^?1 [? 4160 units of DA)] with time‐dependent conversion data obtained via online Fourier transform near infrared spectroscopy (FTNIR) at 60 °C. In addition, the required initiator decomposition rate coefficient, k_d, was determined via online UV spectrometry and was found to be 8.4 · 10^?6 s^?1 (±0.5 · 10^?6 s^?1) in dodecane, n‐butyl acetate, and n‐dodecyl acetate at 60 °C. The initiator efficiency at low monomer conversions is relatively low (f = 0.13) and decreases with increasing monomer to polymer conversions. The evolution of f with monomer conversion (in high‐molecular‐weight regimes), x, at 60 °C can be summarized by the following functionality: f^{60 °C} (x) = 0.13–0.22 · x + 0.25 · x² (for x ≤ 0.45). The reported efficiency data are believed to have an error of >50%. The ratio of the initiator efficiency and the average termination rate coefficient, 〈k_t±, (f/〈k_t〉) has been determined at various molecular weights for the generated polydodecyl acrylate (M_n = 1900 g mol^?1 (? 8 units of DA) up to M_n = 36,500 g mol^?1 (? 152 units of DA). The (f/〈k_t〉) data may be indicative of a chain length‐dependent termination rate coefficient decreasing with (average) chain length. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5170–5179, 2004     

Miscibility and hydrogen‐bonding interactions in blends of carbon dioxide/epoxy propane copolymer with poly(p‐vinylphenol)

The miscibility and hydrogen‐bonding interactions of carbon dioxide and epoxy propane copolymer to poly(propylene carbonate) (PPC)/poly(p‐vinylphenol) (PVPh) blends were investigated with differential scanning calorimetry (DSC), Fourier transform infrared (FTIR) spectroscopy and X‐ray photoelectron spectroscopy (XPS). The single glass‐transition temperature for each composition showed miscibility over the entire composition range. FTIR indicates the presence of strong hydrogen‐bonding interassociation between the hydroxyl groups of PVPh and the oxygen functional groups of PPC as a function of composition and temperature. XPS results testify to intermolecular hydrogen‐bonding interactions between the oxygen atoms of carbon–oxygen single bonds and carbon–oxygen double bonds in carbonate groups of PPC and the hydroxyl groups of PVPh by the shift of C_1s peaks and the evolution of three novel O_1s peaks in the blends, which supports the suggestion from FTIR analyses. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1957–1964, 2002     

Poly(vinyl acetate‐co‐dibutyl maleate) latex films in the presence of grafted and post‐added poly(vinyl alcohol)

We describe the synthesis and characterization of a series of poly(vinyl acetate‐co‐dibutyl maleate) [P(VAc‐DBM)] latex particles (monomer molar ratio 10.6:1). One set of samples [high‐M and M_250k SDS‐P(VAc‐DBM), gel content 50% and 0%] was prepared in the presence of an anionic surfactant sodium dodecyl sulfate. The other two sets of samples [high‐M and M_250k PVOH–P(VAc‐DBM)] were prepared in the presence of poly(vinyl alcohol) (PVOH). These polymers differ in gel content (50 and 0%) and the extent of PVOH grafting (30 and 15%). Polymer diffusion across cell boundaries in the latex films was monitored by fluorescence resonant energy transfer (ET) experiments. First, we examined M_250k samples in the presence of grafted and post‐added PVOH. The presence of post‐added PVOH (5%) causes a small but detectable retardation on the rate of polymer diffusion, whereas the presence of grafted PVOH (degree of grafting: 15%) significantly promotes the polymer diffusion rate. For the high‐M P(VAc‐DBM), the presence of post‐added PVOH also retards the polymer diffusion. Strikingly, the presence of grafted PVOH (degree of grafting: 30%) in the high‐M PVOH‐P(VAc‐DBM) promotes the polymer diffusion to such an extent that the diffusion was complete in the freshly prepared films. Our data also suggest that under our experimental conditions, the rate of P(VAc‐DBM) diffusion increases with an increase of the degree of PVOH grafting. To confirm these results, we carried out fluorescence microscopy experiments to monitor the fate of PVOH in these latex films and found that in newly formed PVOH–P(VAc‐DBM) films, the PVOH was either uniformly distributed in the P(VAc‐DBM) matrix or the domains were too small to be resolved (i.e., < 0.5 μm). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5005–5020, 2004     

Kinetic and ESR studies on the radical polymerization of α‐n‐(α′‐methylbenzyl) β‐ethyl itaconamates derived from racemic and (s)‐α‐methylbenzylamines

The polymerization of α‐N‐(α′‐methylbenzyl) β‐ethyl itaconamate derived from racemic α‐methylbenzylamine (RS‐MBEI) by initiation with dimethyl 2,2′‐azobisisobutyrate (MAIB) was studied in methanol kinetically and with ESR spectroscopy. The overall activation energy of polymerization was calculated to be 47 kJ/mol, a very low value. The polymerization rate (R_p ) at 60 °C was expressed by R_p = k[MAIB]^0.5±0.05[RS‐MBEI]^2.9±0.1. The rate constants of propagation (k_p ) and termination (k_t ) were determined by ESR. k_p was very low, ranging from 0.3 to 0.8 L/mol s, and increased with the monomer concentration, whereas k_t (4–17 × l0⁴ L/mol s) decreased with the monomer concentration. Such behaviors of k_p and k_t were responsible for the high dependence of R_p on the monomer concentration. R_p depended considerably on the solvent used. S‐MBEI, derived from (S)‐α‐methylbenzylamine, showed somewhat lower homopolymerizability than RS‐MBEI. The k_p value of RS‐MBEI at 60 °C in benzene was 1.5 times that of S‐MBEI. This was explicable in terms of the different molecular associations of RS‐MBEI and S‐MBEI, as analyzed by ¹H NMR. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 4137–4146, 2000     

On the origin of ionic liquid‐induced variations in hydroxypropyl methacrylate propagation rate coefficients

Pulsed laser polymerizations were used to study the propagation kinetics of hydroxypropyl methacrylate (HPMA) in ionic liquids (ILs) and common organic solvents. The functional monomer was chosen to investigate the complex interplay of all interactions between monomer molecules and between monomer and solvent molecules and to obtain a deeper understanding of the impact of these interactions. The solvent effect on the HPMA propagation rate coefficient (k_p) was examined using a linear solvation energy relationship (LSER) based on Kamlet‐Taft solvatochromic parameters π*, α, and β. The results suggest that dipolarity/polarizability, associated with π*, and hydrogen bond–donating ability of the solvents, accounted for by α, majorly contribute to variations in k_p. Hydrogen bond–accepting (electron pair donating) ability of the solvents (β parameter) is of much lesser importance. In addition, LSER enables the prediction of HPMA k_p based on solvatochromic parameters of the solvents. The results suggest that interactions between the hydroxyl group of the monomer and the anion are dominant compared with classical hydrogen bonding between carbonyl and hydroxyl groups of the monomer units. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3188–3199, 2010     

Crystalline transition of polyamide‐10,20 investigated by in situ Fourier transform infrared spectroscopy

Real‐time Fourier transform infrared spectroscopy was used to investigate the crystalline transition of even–even polyamide‐10,20. During the crystalline transition, the intensity of the hydrogen bonds became weak, the twisting of the C? CO and C? N bonds improved, and the gauche conformation of the CH₂ sequences increased, along with the strengthening of the vibration of the methylene units. The ordered stacking of methylene segments with the trans‐zigzag conformation gradually became disordered by the insertion of the gauche conformation upon heating. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4017–4022, 2004