Synthesis and photochemical reaction of cyclic oligomers: Synthesis and photopolymerization of novel C‐methylcalix[4]resorcinarene and p‐alkylcalix[n]arene derivatives containing spiro ortho ether groups

New photoreactive calixarene derivatives containing spiro ortho ester groups (calixarenes 3a–3c ) were synthesized by the reaction of 2‐bromomethyl‐1,4,6‐trioxaspiro[4.4]nonane with 2,8,14,20‐tetramethyl‐4,6,10,12,16,18,22,24‐octakis(carboxymethoxy)calix[4]resorcinarene, 5,11,17,23,29,35‐hexamethyl‐37,38,39,40,41,42‐hexakis(carboxymethoxy)calix[6]arene, and 5,11,17,23,29,35,41,47‐octa‐tert‐butyl‐49,50,51,52, 53,54,55,56‐octakis‐(carboxymethoxy)calix[8]arene, which were prepared by the reaction of C‐methylcalix[4]resorcinarene, p‐methylcalix[6]arene, and p‐tert‐butylcalix[8]arene, respectively. The thermal stability of the obtained calixarene derivatives containing spiro ortho ester groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had good thermal stability. The photoinitiated cationic polymerization of spiro ortho ester groups in calixarene derivatives 3a–3c was examined with certain photoacid generators in the film state. Interestingly enough, the reaction of calixarene derivatives did not proceed with only photoirradiation; however, the reaction proceeded smoothly when the photoirradiation was followed by heating. Furthermore, calixarene 3a , composed of a C‐methylcalix[4]resorcinarene structure, showed the highest photochemical reactivity in this reaction system. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1293–1302, 2002     

Synthesis and Rh(I)‐catalyzed polymerization of 1,3‐diphenylyne–calix[4]arene compounds: Novel conjugated,calixarene‐based polymers

The synthesis of two 1,3‐bis(4‐ethynylbenzyloxy)calix[4]arenes, 5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 1 ) and 25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene ( 2 ), was accomplished through Sonogashira coupling of appropriate calixarene derivatives. Methods for the polymerization of these bifunctional building blocks with Rh(I) as a catalyst, leading ultimately to conjugated polymers having calix[4]arene units incorporated into the main chain, were explored. Calixarenes 1 and 2 were efficiently polymerized with rhodium‐based initiators and afforded the conjugated polymers poly{5,11,17,23‐tetrakis(1,1‐dimethylethyl)‐25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene} ( poly 1 ) and poly{25,27‐bis(4‐ethynylbenzyloxy)‐26,28‐dihydroxycalix[4]arene}. Depending on the conditions, high conversions and good yields were obtained. The effects of adding cocatalysts (NHEt₂ and/or PPh₃) were studied in connection with the number‐average molecular weight and the molecular weight distribution of the resultant polymer ( poly 1 ) and tentatively correlated with the formation of low‐molecular‐weight materials. A catalytic system containing triphenylphosphine as the sole additive ([Rh(nbd)Cl]₂; [Rh]/[PPh₃] = 0.5) proved to be the best for the polymerization of p‐tert‐butylcalixarene compound 1 . Linear polymers having high number‐average molecular weights (up to 1.1 × 10⁵ g mol^?1) with low polydispersities were produced under these conditions. For debutylated homologue 2 , its polymerization was best carried out in the absence of any added cocatalyst. A cyclopolymerization route, comprising the intramolecular ring closing of the calix[4]arene pendant ethynyl groups followed by an intermolecular propagation step, is advanced to explain the results. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 7054–7070, 2006     

杯芳烃接枝超细SiO2的制备及其对Cu2+、Ag+萃取性能的研究

通过对杯[4]芳烃以及杯[6]芳烃上缘进行烯丙基化和硅氢加成2步衍生化反应得到硅氢化杯[4]芳烃以及硅氢化杯[6]芳烃,再将这2种硅氢化杯芳烃衍生物分别接枝到超细SiO₂上。在不同的pH值条件下,就2种杯芳烃接枝超细SiO₂衍生物对水合Cu²⁺及Ag⁺的萃取性能进行了研究。结果表明,与对叔丁基杯芳烃相比较,杯芳烃接枝超细SiO₂衍生物对Cu²⁺和Ag⁺的萃取率都有所提高,其中杯[4]芳烃接枝超细SiO₂对Ag⁺的最高萃取率达到98.78%,杯[6]芳烃接枝超细SiO₂对Cu²⁺的最高萃取率达到67.74%。     

Extraction of Catecholamines by Calixarene Carboxylic Acid Derivatives

Extraction behaviors of catecholamines with a series of calixarene carboxylic acid derivatives were investigated. Relatively large calix[6]arene and calix[8]arene extract catecholamines into the organic solution, while smaller calix[4]arene and the monomer analog do not. The calix[6]arene, which has a cavity that fits a protonated amino group well, selectively extracts a primary amino compound dopamine over other catecholamines. Slope analysis and Job’s method confirmed formation of a 1:1 complex between the calix[6]arene and dopamine. On the other hand, the calix[8]arene extracts both dopamine and adrenaline, due to the large cavity for induced-fit recognition. Dopamine extracted with the calixarene is quantitatively stripped by contacting the organic solution with a fresh acidic solution.     

Oligomeric calix[4]arene‐thiacrown ether for toxic heavy metals

A new oligomeric calix[4]arene‐thiacrown‐4 ( 5 ) was synthesized via a condensation reaction of 5,11,17,23‐tetra‐tert‐butyl‐25,27‐bis‐(4‐aminobenzyloxy)‐calix[4]arene‐thiacrown‐4 ( 4 ) with adipoyl dichloride. In this oligomerization reaction only five/six calix[4]arene‐thiacrown‐4 units were linked in the oligomeric chain. The complexation studies of 5 were made with liquid–liquid‐ extraction and solid–liquid‐sorption procedures. For comparison, the extraction efficiencies of monomers 1 , 3 , and 4 to selected transition metals are reported. The selectivity of monomers 3 and 4 toward Cu²⁺, Hg²⁺, and Pb²⁺ was lost after oligomerization in the two‐phase extraction systems. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 186–193, 2004     

Synthesis of photoreactive calixarene derivatives containing pendant cyclic ether groups

New photoreactive calixarene derivatives containing cationically polymerizable pendant oxetane groups (calixarenes 1a , b , 2a , b , and 3a , b ) were synthesized in good yields by the substitution reaction of C‐methylcalix[4]resorcinarene (CRA), p‐methylcalix[6]arene (MCA), and p‐tert‐butylcalix[8]arene (BCA) with (3‐methyloxetan‐3‐yl)methyl 4‐toluenesulfonate and (3‐ethyloxetan‐3‐yl)methyl 4‐toluenesulfonate with potassium hydroxide as a base and tetrabutylammonium bromide as a phase‐transfer catalyst in N‐methyl‐2‐pyrrolidone, respectively. Calixarene derivatives containing cationically polymerizable pendant oxirane groups (calixarenes 4 , 5 , and 6 ) were also prepared in good yields by the substitution reaction of CRA, MCA, and BCA with epibromohydrin, respectively, with cesium carbonate as a base in N‐methyl‐2‐pyrrolidone. The thermal stability of the obtained calixarene derivatives containing pendant oxetane groups or oxirane groups was examined with thermogravimetric analysis, and it was found that these calixarene derivatives had thermal stability beyond 340 °C. The photochemical reaction of calixarenes 1 , 2 , and 3 containing pendant oxetane groups was examined with certain photoacid generators in the film state. In this reaction system, calixarene 1a , composed of a CRA structure and pendant (3‐methyloxetan‐3‐yl)methyl groups, showed the highest photochemical reactivity when bis‐[4‐(diphenylsulfonio)phenyl]sulfide bis(hexafluorophosphate) was used as the catalyst. The photochemical reaction of calixarenes 4 , 5 , and 6 containing pendant oxirane groups was also examined, and it was found that the photoinitiated cationic polymerization of calixarenes 4 , 5 , and 6 proceeded smoothly under the same conditions; however, the reaction rates were lower than those of the corresponding calixarenes 1 , 2 , and 3 containing pendant oxetane groups. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1169–1179, 2001     

Efficient Construction and Structure Determination of Novel Macrocycles with Calixarene Bishydrazones

A series of large macrocyclic calixarene bishydrazones were efficiently synthesized by [2+2] condensation reactions of calix[4]arene 1,3‐disubstituted aldehydes with hydrated hydrazine. The X‐ray single crystal diffraction showed that macrocycles form a distinctive calixtube‐liking shape.     

Calixarene‐centered amphiphilic A2B2 miktoarm star copolymers based on poly(ε‐caprolactone) and poly(ethylene glycol): Synthesis and self‐assembly behaviors in water

Novel calixarene‐centered amphiphilic A₂B₂ miktoarm star copolymers composed of two PCL arms and two PEG arms with calix[4]arene as core moiety were synthesized by the combination of CROP and “click” chemistry. First, a heterotetrafunctional calix[4]arene derivative with two hydroxyl groups and two alkyne groups was designed as a macroinitiator to prepare calixarene‐centered PCL homopolymers (C4‐PCL) by CROP in the presence of Sn(Oct)₂ as catalyst at 110 °C. Next, azide‐terminated PEG (A‐PEG) was synthesized by tandem treating methoxy poly(ethylene glycol)s (mPEG) with 4‐chlorobutyryl chloride and NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction between C4‐PCL and A‐PEG led to A₂B₂ miktoarm star copolymer [C4S(PCL)₂‐(PEG)₂]. ¹H NMR, FT‐IR, and SEC analyses confirmed the well‐defined miktoarm star architecture. These amphiphilic miktoarm star copolymers could self‐assemble into multimorphological aggregates in water. The calix[4]arene moieties with a cavity <1 nm on the hydrophilic/hydrophobic interface of these aggregates may provide potential opportunities to entrap guest molecules for special applications in supermolecular science. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

杯[4]芳烃黄原酸酯衍生物的合成与阳离子萃取性能

以二氧六环作溶剂, 杯[4]芳烃二甲氧基二羟乙氧基衍生物2与氢氧化钾、二硫化碳作用合成了杯芳烃黄原酸盐衍生物3, 并进一步与碘甲烷或氯化苄反应首次合成了含黄原酸酯基的杯芳烃衍生物4a和4b. 阳离子萃取试验表明该新型杯芳烃衍生物比单硫杂杯芳烃衍生物具有更好的过渡金属离子萃取性能.     

Comparison of pillar[5]arene and calix[4]arene anion receptor ability in aqueous media

Abstract

Recognition ability of both cationic pillar[5]arene and calix[4]arene has been studied in aqueous media. Anion complexation can be evaluated from their ability to complex their counterions as well as an added external organic anion. DOSY NMR experiments and fluorescence quenching show that pillararenes have a larger ability for including their own counterions than calixarenes irrespective of the anion (tetrafluoroborate or chloride or bromide) and the structure of the cationic moiety (trimethylammonium or methylimidazolium). Counterion complexation shows a picture where four to five positive charges of the pillar[5]arene are neutralised, meanwhile only one positive charge of the calixarene is neutralised for a 1 mM solution of the macrocycle. Irrespective of the smaller net positive charge in the pillar[5]arene, its binding ability for organic anions (toluenesulfonate or hydroxybenzoate) is larger than for calix[4]arene allowing a better accommodation of the guest in its cavity. The larger separation between the cationic groups of the receptor and its electron-rich aromatic region improves the anion recognition ability for pillar[5]arene.     

两种新型杯（4）芳烃衍生物用作毛细管气相色谱固定相的研究

合成了两种新型的杯（４）芳烃衍生物：５－１′，１′－二甲基十一烯氧基苯基甲基－１１，１７，２３－三－１，１－二甲基乙基－２５，２６，２７，２８－四苄氧基杯（４）芳烃Ｃ（４）ＴＢ）及５－１′，１′－二甲基十一烯氧基苯基甲基－１１，１７，２３－三－１′，１′－二甲基－２５，２６，２７，２８－四乙氧羰甲氧基（Ｃ（４）ＴＥＣＭ）其结构经元素分析ＩＲ，＾１ＨＮＭＲ，ＭＳ的数据证实，分别将其与ＯＶ－１７０１固     

Extraction Behavior of Amino Acids by Calix[6]arene Carboxylic Acid Derivatives

A series of calixarene carboxylic acid derivatives were synthesized for the extraction of amino acids. A calix[6]arene carboxylic acid derivative showed the highest extractability to the target tryptophan ester. The main driving forcefor the complexation was the interaction between the ammonium cation of the aminoacid and the oxygen atoms of the host molecule. Stripping of amino acids was alsoaccomplished by contacting the organic solution with a fresh acidic solution. Basedon slope and Job method analyses, it was confirmed that the calix[6]arene formsa 1 : 1 complex with the amino acid ester. The structure of the complex between the calix[6]arene and the amino acid was investigated by ¹H-NMR and CD spectra. The calix[6]arene includes a guest molecule in the cavity, and the inclusion induces the asymmetrization of the host molecule. This host compound functions as a novel recognition tool for amino acids.     

Investigation of Metal Ion Complexation of π-Coordinate Calixarene Derivatives by Electrospray-Ionization Mass Spectrometry

Complexation of π-coordinate calix[4]arene derivatives toward soft metal ions, silver and thallium (I) ions, has been studied by electrospray-ionization mass spectrometry. Competitive metal–ion complexation of three calix[4]arene derivatives demonstrates a significant effect of olefinic substituents and its location on the silver ion complexation, but there was no effect of them on the thallium ion complexation. The stability constants for the metal ion complexes of the calixarene derivatives in methanol have been successfully determined by a mass-spectrometric method using 18-crown-6 as the reference ligand.     

Structures and properties of solvated and unsolvated isopropyl functionalised calix[4]arenes

The tetra-isopropyl ethers of calix[4]arene and p-t-butylcalix[4]arene have been isolated in the cone conformation, and structurally characterised as chloroform solvates. Thermogravimetric analysis demonstrated that the parent isopropylcalix[4]arene solvate is significantly more stable than the p-t-butylcalix[4]arene analogue, retaining the solvent up to a temperature of 125°C. It was found that the calix[4]arene ether sublimes at atmospheric pressure, and solvent-free crystals appropriate for structure determination were produced at reduced pressure. The p-t-butylcalix[4]arene ether was also isolated without solvent in the lattice, but in this case the calixarene was crystallised from acetone, as sublimation did not produce crystals of sufficient quality.     

Multiple proton ionizable calixarene derivatives with different ring sizes and complexation ability as efficient ionophores for complexation and solvent extraction of trivalent indium

The solvent extraction behavior of multiple proton ionizable p-tert-butylcalix[4]arene and [6]arene carboxylic acid derivatives towards indium has been investigated along with an acyclic monomeric analogue from weakly acidic media into chloroform. The extraction mechanism is ion exchange and carboxylic acid groups are adequate ligating sites for extraction. The cyclic structure of calixarene ligands to accommodate the potential guest species and the cooperativity effect of multifunctional groups significantly affect the complexation behavior and calixarene derivatives are found to be excellent extractants over the monomeric analogue. The composition of the extracted complex depends on the solution pH and attempts to determine the composition of the extracted complex for the extraction of indium have been stymied by complications arising from the formation of polynuclear species of indium and bridged polymeric species of calixarene carboxylic acid derivatives. One mole of calix[4]arene derivative extracts 2.5 moles of indium whereas the calix[6]arene derivative tends to extract 4.0 moles of indium. The loaded indium is back extracted with 1 mol dm(-3) hydrochloric acid solution. Though quantitative back extraction of indium was achieved from the fully loaded calix[6]arene derivative, it was only achieved up to 85% in the case of the calix[4]arene derivative.     

(1+1) or (2+2) Coupling for bis(tosyloxyethoxy)benzenes with calix[4]arene and thiacalix[4]arene

As bifunctional reagents, bis(tosyloxyethoxy)benzenes can react with p-tert-butylcalix[4]arene or p-tert-butylthiacalix[4]arene to afford intramolecularly bridged (1+1) or intermolecularly bridged (2+2) products. It was found that the bridging pattern strongly depended on the structure of bis(tosyloxyethoxy)benzene and the kind of calixarene. For the ortho-isomer of bis(tosyloxyethoxy)benzene, intramolecularly bridged calix[4]arene and thiacalix[4]arene were the main products. For the para-isomer, the bridging reaction was in a (2+2) fashion. As for the meta-isomer, double thiacalix[4]arene and intramolecularly bridged calix[4]crown were synthesized.     

One‐Step Synthesis of Singly Bridged Biscalix[4]arenes with Oligooxyethyleneethyl Spacers

Here we describe the one‐step synthesis of a series of singly bridged biscalix[4]arene derivatives connected by ethylene or oligooxyethyleneethyl chain through the reaction of calix[4]arene with corresponding ethylene or oligoethylene glycol ditosylates in the presence of sodium hydride in toluene. A 1,2‐bis(ethylene) doubly bridged bis‐p‐tert‐butylcalix[4]arene was also obtained as a by‐product.     

Synthesis of fully lower‐rim,carbonate‐bridged calix[8]arenes and their curing behavior

Novel fully lower‐rim, carbonate‐bridged calix[8]arene derivatives were successfully synthesized in high yield by the condensation of p‐alkyl substituted calix[8]arenes with triphosgene. Different bases and catalysts were used for the preparation depending on the p‐alkyl substituted groups of the calix[8]arenes. The conformational features of the derivatives were examined by ¹H NMR analysis. Thermosetting formulations were prepared from a mixture of bisphenol A polycarbonate with calix[8]arene carbonate derivatives using sodium benzoate as a catalyst. Their crosslinking behaviors were studied using differential thermal/thermogravimetric analysis. No glass‐transition temperatures were observed after annealing at 280–300 °C. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 1149–1155, 2001     

Synthesis,Crystal Structure and Complexing Properties of Calix[4]arene Schiff Bases

Four p‐tert‐butylcalix[4]arene derivatives with different Schiff base groups at the lower rim were efficiently prepared in three steps. p‐tert‐Butylcalix[4]arene was firstly O‐peralkylated with ω‐haloalkylphthalimide in the system of NaH/DMF to give calixarene tetraalkylphthalimides, which were in turn hydrazinolyzed to give tetraaminoalkylcalixarenes. Then by condensation of the latter with salicylaldehyde and 2‐hydroxy‐1‐naphthaldehyde, a series of calixarene Schiff bases were obtained in satisfying yields. The complexing properties of these Schiff bases for transition metal ions were investigated with UV spectroscopy.     

The Synthesis of Nitrogen-Containing Calixarene Derivatives and their Interactions with Lead Ions

Several new nitrogen-containingcalixarene derivatives have been synthesized andtheir ion-binding properties investigated byUV spectroscopy and solventextraction. These derivatives include5,11,17,23-tetra-t-butyl-25,26,27,28-tetrakis(piperidinocarbonylmethoxy)calix[4]arene (5),5,11,17,23,29,35,41,47-octa-t-butyl-49,50,51,52,53,54,55,56-octa(piperidinocarbonylmethoxy)calix[8]arene (6) and5,11,17,23,29,35,41,47-octa-t-butyl-49,50,51,52,53,54,55,56-octa(N,N-diethyl-car-bamoyl-methoxy)calix[8]arene(7). The UV spectra of and 7revealed they had an ability to transform tight lead picrate ionpairs into separated ones by complexationwith Pb²⁺ in tetrahydrofuran.Both derivatives give 1 : 1 complexes with Pb²⁺. Extraction studies showed that these derivativescould efficiently extract Pb²⁺ (as picrate salts) from the aqueous phase into chloroform. Theextractability of these derivatives were also compared with that ofthe oxygen-containing ester derivative calix[8]arene 2 and the other two nitrogen-containingcompounds 8 and 9.