Synthesis and optical properties of novel blue‐light‐emitting poly(p‐phenylene vinylene) derivatives with pendant oxadiazole or cyano groups

Two novel poly(p‐phenylene vinylene) polymers, which carried side substituents with cyano groups or 1,3,4‐oxadiazole, were synthesized by Heck coupling. They consisted of alternating conjugated segments and nonconjugated aliphatic spacers. The polymers had moderate molecular weights, were amorphous, and dissolved readily in tetrahydrofuran and halogenated organic solvents. They were stable up to approximately 340 °C in N₂ and 290 °C in air, and the anaerobic char yield was around 60% at 800 °C. The polymer with cyano side groups emitted blue light in solutions and thin films with identical photoluminescence (PL) maximum at 450 nm; this supported the idea that chain interactions were hindered even in the solid state. The PL maximum of this polymer in thin films was blueshifted upon annealing at 120 °C, indicating a thermochromic effect as a result of conformational changes in the polymer backbone. The polymer containing side substituents with oxadiazole rings emitted blue light in solutions with a PL maximum at 474 nm and blue‐greenish light in thin films with a PL maximum at 511 nm. The PL quantum yields of the polymers in tetrahydrofuran were 0.13–0.24. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1768–1778, 2004     

Synthesis and characterization of polyurethane anionomers with bisazoaromatic chromophores and carboxylate groups

A new diol with a bisazoaromatic pendant was prepared to obtain photosensible polymers suitable for dyed aqueous systems. A polyurethane bearing bisazoaromatic chromophores, based on a poly(tetramethylene oxide) diol (average molecular weight = 2000), 2,4‐tolylene diisocyanate, and the aforementioned azo diol, was synthesized and characterized. Bichromophoric polyurethane anionomers, prepared by a two‐step substitution of urethane hydrogen atoms with sodium carboxylate groups, were studied. The influence of the concentration of carboxylate groups (30–158 mequiv of ionic groups/100 g of polymer) on some polymer properties and photoisomerism in polymer solutions and thin films was examined. In particular, the polymer structure and its morphology dictated the proximity of anchored bisazo chromophores and the capability of intermolecular forces between dyes producing hydrogen aggregates in solutions and thin films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5463–5470, 2004     

Synthesis and optical properties of an azoaromatic,chromophore‐functionalized,oligomeric polyelectrolyte

A main‐chain, azoaromatic, chromophore‐functionalized polyelectrolyte with an oligomeric molecular weight was synthesized by the reaction of 4,4′‐azobispyridine and 1,6‐dibromohexane. The polyelectrolyte was designed to contain ionic groups to impart electrostatic self‐assembly with polyanion and azoaromatic groups for photoprocessability. The polymer solution exhibited a solvatochromic effect, having different absorption maxima in water (294 nm) and N,N‐dimethylformamide (400 nm). By a change in the counteranions of the bispyridinium groups, the solubility of the polymer could be controlled, and this made it possible to fabricate electrostatic assembled films or spin‐cast films for further applications. The direct photofabrication of laser‐induced interference patterns on polymer surfaces with large surface modulation was also investigated with an argon ion laser. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1196–1201, 2003     

Molecular design,synthesis, and nonlinear optical properties of novel T‐type polyimides with exceptionally high thermal stability of the second harmonic generation

2,5‐Bis‐(3,4‐dicarboxyphenylcarboxyethoxy)‐4′‐nitrostilbene dianhydride was prepared and reacted with 1,4‐phenylenediamine, 4,4′‐oxydianiline, 4,4′‐diaminobenzanilide, and 4,4′‐(hexafluoroisopropylidene)dianiline to yield unprecedented novel T‐type polyimides ( 4 – 7 ) containing 2,5‐dioxynitrostilbenyl groups as nonlinear optical chromophores, which constituted parts of the polymer backbones. 4 – 7 were soluble in polar solvents such as acetone and N,N‐dimethylformamide. They showed thermal stability up to 300 °C in thermogravimetric analysis thermograms; the glass‐transition temperatures obtained from differential scanning calorimetry thermograms were around 153 °C. The second harmonic generation (SHG) coefficients (d₃₃) of poled polymer films at the 1064‐cm^?1 fundamental wavelength were around 4.35 × 10^?9 esu. The dipole alignment exhibited exceptionally high thermal stability even at 45 °C higher than the glass‐transition temperature, and there was no SHG decay below 200 °C because of the partial main‐chain character of the polymer structure, which was acceptable for nonlinear optical device applications. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3189–3199, 2004     

Crosslinkable poly(p‐phenylenevinylene) derivative

To simplify the fabrication of multilayer light‐emitting diodes, we prepared a p‐phenylenevinylene‐based polymer capped with crosslinkable styrene through a Wittig reaction. Insoluble poly(p‐phenylenevinylene) derivative (PPVD) films were prepared by a thermal treatment. The photoluminescence and ultraviolet–visible (UV–vis) absorbance of crosslinked films and noncrosslinked films were studied. We also studied the solvent resistance of crosslinked PPV films with UV–vis absorption spectra and atomic force microscopy. Double‐layer devices using crosslinked PPVD as an emitting layer, 2‐(4‐tert‐butylphenyl)‐5‐phenyl‐1,3,4‐oxadiazole (PBD) in poly(methyl methacrylate) as an electron‐transporting layer, and calcium as a cathode were fabricated. A maximum luminance efficiency of 0.70 cd/A and a maximum brightness of 740 cd/m² at 16 V were demonstrated. A 12‐fold improvement in the luminance efficiency with respect to that of single‐layer devices was realized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2124–2129, 2004     

Structural evolution of cylindrical‐phase diblock copolymer thin films

We have measured the time evolution of the self‐assembly process in perpendicular‐oriented cylindrical‐phase diblock copolymer thin films using statistical analysis of high‐resolution scanning electron microscope (SEM) images. Within minutes of annealing above the polymer glass‐transition temperature, microphase separation between polymer blocks results in formation of uniform nanometer‐scale domains whose relative position is initially largely uncorrelated. On further annealing, the cylindrical polymer domains organize into a two‐dimensional hexagonal lattice whose characteristic grain size increases slowly with time (～t^1/4). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1970–1975, 2004     

Synthesis,optical properties,and electroluminescence of conjugated poly(p‐phenylenevinylene) derivatives containing 1,3,4‐oxadiazole and pyridine rings in the main chain

Three new poly(p‐phenylenevinylene) derivatives—PO, POD, and POP—with oxadiazole and pyridine rings along the main chain were synthesized via Heck coupling. The polymers were amorphous and dissolved readily in common organic solvents. They showed relatively low glass‐transition temperatures (up to 42 °C) and satisfactory thermal stability. Solutions of the polymers emitted blue‐greenish light with photoluminescence (PL) emission maxima around 460 nm and PL quantum yields of 0.28–0.49. Thin films of the polymers displayed PL emission maxima at 461–521 nm, and their tendency to form aggregates was significantly influenced by the chemical structure. Light‐emitting diodes with polymers PO and POP, with an indium tin oxide/poly(ethylenedioxythiophene) (PEDOT)/polymer/Ca configuration, emitted yellow and green light, respectively, and this could be attributed to excimer emission. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3212–3223, 2004     

Absolute absorption measurements of polymer films for optical waveguide applications by photothermal deflection spectroscopy

A self‐contained experimental technique is proposed for measuring the absolute optical absorption spectra, thermal diffusivity, and thermal conductivity of polymer thin films. The technique is based on photothermal deflection spectroscopy and provides sensitivity that is high enough to quantify the very small optical absorption losses in polymer films used for optical waveguide applications. The capabilities of the technique are demonstrated with measurements performed on thin films of poly(methyl methacrylate) and a fluorinated polymer (CYTOP). An error analysis is presented, and the factors are discussed that influence the accuracy of the technique. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2717–2726, 2001     

Crown‐ether and azobenzene‐containing liquid crystalline polymers: An influence of macromolecular architecture on optical properties and photo‐orientation processes

A series of novel crown ether‐containing photochromic comb‐shaped liquid crystalline polyacrylates with different macromolecular structure of side groups were synthesized and investigated. Phase behavior, optical and photo‐optical properties of thin spin‐coated films of these polymers were studied. A special attention was paid to a comparative study of the photo‐orientation phenomena occurring in the polymer films under a polarized light action. It was shown that complex formation with the potassium ions results in the decrease in degree of the photoinduced order that can be used for the creation of new materials for sensor devices. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of new polybenzimidazopyrrolones derived from pyridine‐bridged aromatic tetraamines and dianhydrides

A series of new polybenzimidazopyrrolones (polypyrrolone, PPy) were synthesized by polycondensation of pyridine‐bridged aromatic tetraamines, including 2,6‐bis (3′,4′‐diaminophenyl)‐4‐phenylpyridine and 2,6‐bis(3′,4′‐ diaminophenyl)‐4‐(3″‐trifluoromethyl)phenyl pyridine, with various aromatic dianhydrides. Experimental results indicated that the PPys, multiaromatic conjugated and semiladder polymers, showed good thermal stabilities with thermal‐decomposition temperatures of about 500 °C and residual weight retention at 750 °C as high as 84%. PPy films could be obtained by casting the precursor solution, poly(amide amino acid) on glass substrate, followed by thermal dehydrating at elevated temperatures. The polymer films exhibited excellent alkaline hydrolysis resistance, which retained their original shapes and toughness after boiling 7 days in 10% sodium hydroxide solution. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1845–1856, 2004     

Poly(ethylene terephthalate) modified with aromatic bisester diamides: Thermal and oxygen barrier properties

The synthesis and properties of poly(ethylene terephthalate) (PET) copolymers containing four bisester diamide structural units are reported. Two of the bisester diamides consist of three para‐substituted aromatic rings, and the other two consist of three meta‐substituted aromatic rings. The copolymers have been characterized by nuclear magnetic resonance, differential scanning calorimetry, and dilute solution viscometry. Three of the copolymers can be compression‐molded into amorphous films for oxygen barrier testing, and one of these three films can be oriented for additional barrier testing. The three amorphous films all have lower permeabilities than unoriented PET. However, this difference diminishes upon the orientation of the polymer films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1668–1681, 2004     

New series of highly phenyl‐substituted polyfluorene derivatives for polymer light‐emitting diodes

A new series of highly phenyl‐substituted polyfluorene derivatives were synthesized and characterized. The resulting polymers were amorphous and showed excellent solubility in common organic solvents, such as chloroform, tetrahydrofuran, xylene, toluene, chlorobenzene, and so forth. All possessed satisfied thermal stability with glass‐transition temperatures (T_g's) in the range of 79–115 °C. They emitted blue light with photoluminescent (PL) maximum peaks at about 408–412 nm in thin films. The PL efficiencies of the polymer films were measured around 30–33%. The highly phenylated pendants improved the T_g of polyfluorene without forming defects in the polymers and reduced their tendency to form aggregate/excimers. Polymer light‐emitting diodes were fabricated from these polymers with the configuration of indium tin oxide/polyethylenedioxythiophene:polystyrene sulfonic acid/polymer/Ba/Al, which emitted bright blue light with maximum peaks at 418–420 nm. The maximum external quantum efficiencies of these devices were 0.41–0.6%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2985–2993, 2004     

Syntheses of bisazo‐containing polymethacrylates using atom transfer radical polymerization and the photoalignment behavior

Three kinds of photoresponsive polymethacrylates containing different bisazo chromophores were prepared with atom transfer radical polymerization and characterized with proton nuclear magnetic resonance, gel permeation chromatography, and ultraviolet–visible spectra. These polymers had similar molecular weights, molecular weight distributions, glass‐transition temperatures, and absorption coefficients. The irradiation of these polymer films with a linearly polarized laser could induce birefringence because of the reorientation of the bisazo chromophores through trans–cis–trans isomerization cycles of double azo bonds, and the corresponding mechanism was also examined. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4237–4247, 2004     

Design and synthesis of optically transparent calcium‐incorporated polymer complexes

Transparent thin films of calcium‐ion‐incorporated polymer composites were synthesized with calcium carbonate (CaCO₃) and polymers such as poly(acrylic acid) (PAA), poly(ethylene glycol) (PEG), and methylcellulose. The homogeneous distribution of Ca²⁺ in the composite films was observed because of the high concentration of COO^? groups along the PAA backbone for the complexation of Ca²⁺ ions. The optical transparency of the composites depends on the weight percentages of the three polymers and the molar concentration of CaCO₃ in the composites. Maximum transparency was obtained for a composite film with a PAA/CaCO₃ ratio of 9:1. The results indicated that methylcellulose improved the film‐forming capabilities and that PEG improved the transparency of the composites. All polymer complexes were characterized with X‐ray diffraction, fourier transfer infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, dynamic mechanical analysis, and optical transparency measurements. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4459–4465, 2004     

New polyurethanes and polyesters for second‐order nonlinear optical applications

New polymers for second‐order nonlinear optical (NLO) applications were synthesized and characterized. They were distinguished by the presence of chromophore groups, with various molecular hyperpolarizability values, used as pendants on substantially rigid backbones. The polymers were prepared through the reaction of tolylene‐2,4‐diisocyanate, or a suitable alkyloxyphthaloyl dichloride, with the N,N‐diethanol‐4‐(phenyl) group azo‐linked to a nitrofluorenone, nitrostilbene, nitrooxadiazole, or nitrothiadiazole moiety. The polymers exhibited good thermal stability, high glass‐transition temperatures, and an absence of crystallinity. The second‐order NLO properties of thin, transparent poled films, prepared by spin coating and thermal corona poling, were investigated for some of the polymers. The second harmonic coefficients, ranging between 18 and 25 pm/V, depended more on the alignment of the chromophore groups along the direction of the poling field than on their molecular hyperpolarizability. The temporal stability of the NLO properties of the polymers was also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3013–3022, 2004     

New materials for optical rectification and electrooptic sampling of ultrashort pulses in the terahertz regime

The synthesis and nonlinear optical characterization of new electrooptic (EO) materials useful for terahertz (THz) applications is presented. Semiempirical calculations were used to guide the development of a series of chromophores on the basis of 2‐dicyanomethylen‐3‐cyano‐4,5,5‐trimethyl‐2,5‐dihydrofuran acceptors acting as guests in polymer films used in the generation of THz radiation via optical rectification. Amorphous films, 65–250 μm thick, with EO coefficients as high as 52 pm/V at 785 nm were used to generate sub‐picosecond pulses with bandwidths up to 3 THz. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2492–2500, 2003     

Effects of the structures of polymerizable monomers on the electro‐optical properties of UV cured polymer dispersed liquid crystal films

Polymer dispersed liquid crystal (PDLC) films were prepared by photopolymerization of liquid crystal (LC)/polymerizable monomers/photoinitiator composites. The effects of the structures of the polymerizable monomers on the electro‐optical properties of PDLC films were investigated. It was found that the length of the molecular chain and the rigidity and flexibility of molecules influenced the structure of the polymer network in the PDLC films somewhat, and then affected the electro‐optical properties of the composites accordingly. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1369–1375, 2008     

Synthesis and properties of novel polyurethanes containing 3,4‐dioxybenzylidenecyanoacetate group as a nonlinear optical chromophore

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate ( 3 ) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate ( 2 ). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4 – 6 containing the nonlinear optical chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4 – 6 were soluble in common organic solvents such as acetone and dimethylformamide. Polymers 4 – 6 indicated thermal stability up to 300 °C in thermogravimetric thermograms with glass‐transition temperature values obtained from differential scanning calorimetric thermograms in the range of 78–102 °C. The second‐harmonic generation coefficients (d₃₃) of the poled polymer films were around 6.9 × 10^?9 esu. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1742–1748, 2002     

Synthesis of azobenzene‐containing polythiophenes and photoinduced anisotropy

Three new polythiophenes containing an azobenzene moiety in the side‐chain were synthesized and characterized. Two of them, which are slightly soluble in tetrahydrofuran to allow the preparation of thin films from solution casting, were used to investigate the photoinduced anisotropy arising from the photoisomerization of azobenzene in this type of polymer. The results show that, unlike other amorphous azobenzene polymers, only an extremely small anisotropy can be induced on excitation with an Ar⁺ laser at 488 nm in these azobenzene‐containing polythiophenes, and that this photoinduced anisotropy is observable only by heating the polymer to some temperatures below glass transition temperature. It is suggested that the inability for azobenzene polythiophenes to display a significant photoinduced anisotropy may be caused by some structural constraints and/or a severe interference from conjugated thiophene chains that absorb strongly in the visible region. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3445–3455, 2004     

Large electro‐optic activity and enhanced temporal stability of methacrylate‐based crosslinking hyperbranched nonlinear optical polymer

A methacrylate‐based crosslinking hyperbranced polymers have been synthesized through initiator‐fragment incorporation radical polymerization and used for the temperature stable electro‐optic (EO) polymer application. This polymer consists of methyl methacrylate, 2‐metacryloxyethyl isocyanate, and ethylene glycol dimethacrylate (EGDMA) monomers. The use of EGDMA as a bifunctional unit resulted in the solvent‐soluble crosslinking hyperbranched chain, so that the EO polymer enhanced glass transition temperatures. A phenyl vinylene thiophene vinylene bridge nonlinear optical chromophore was attached to the polymer backbone as the side‐chain by a post‐functionalization reaction. The loading concentration of the chromophore was varied between 30 and 50 wt % by simply changing the mixing ratio of the precursor polymer to the chromophore. The synthesized EO polymers produced optical quality films with a light propagation loss of 0.61 dB/cm in a slab waveguide at 1.31 μm. The electrically poled film had an EO coefficient (r₃₃) of 139 pm/V at 1.31 μm. The EO crosslinking hyperbranced polymer had a high‐glass transition temperature of 170 °C, and exhibited excellent temporal stability of the EO activity at 85 °C for 500 h. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012