Organotin polymers—I. Copolymerization parameters of tributyltin methacrylate with methyl methacrylate,propyl methacrylate and butyl methacrylate

The monomer reactivity ratios for radical copolymerizations of tributyltin methacrylate (monomer-1) with methyl methacrylate, propyl methacrylate and butyl methacrylate have been found as r₁ = 0.79 and r₂ = 1.0, r₁ = 0.58 and r₂ = 0.9, and r₁ = 0.65 and r₂ = 0.68 respectively.     

Preparation of methyl methacrylate and glycidyl methacrylate copolymerized nonporous particles

Particles of methyl methacrylate (MMA) and glycidyl methacrylate (GMA) copolymer having narrow size distributions were prepared by the method of dispersion polymerization. Results from the analysis of particle porosity and the correlation of specific surface area with the reciprocal of particle diameter suggest that the prepared particles were nonporous. The particle size was found to decrease from 4.2 to 2.1 μm with increasing the mass ratio of GMA/MMA from 0.1 to 0.75. Polymer particles having an average diameter falling in this range are suitable for being employed as the stationary phase in protein chromatography. The decrease in particle size when GMA was present could be due to the increase in adsorption rate of poly(vinyl pyrrolidone). The oligomer chains that were rich in GMA were more active for adsorbing and grafting PVP, compared with the moiety of MMA. An increase in the GMA/MMA ratio also leaded to a decrease in epoxy‐group density on the particle surface, since the reactivity of GMA was greater than that of MMA. Results of this work suggest that the influence of GMA/MMA mass ratio on the particle size and surface functionality of the nonporous particles was very significant. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1457–1463, 1999     

Fluorescence of copolymers of 2-naphthyl methacrylate and methyl methacrylate

The fluorescence of a series of copolymers of 2-naphthyl methacrylate (2-NM) and methyl methacrylate (MMA) with various contents of 2-NM (obtained in chloroform, carbon tetrachloride and acetonitrile) was investigated. A linear dependence between the ratio of the excimer to monomer emission intensities (I_D/I_M) and the diad fraction (f_nn) of 2-NM monomer units was established. The relationship between I_D/I_M and f_nn · I_n (I_n = the mean sequence length of 2-NM units) fits a logarithmic curve. The results indicate that the excimer emission is determined mainly by the nearest neighbour naphthalene-containing monomer units in the copolymer chain. The copolymers obtained in acetonitrile have higher values of I_D/I_M than those obtained in chloroform and carbon tetrachloride. This difference is due to the higher content of mm-triads in copolymers from acetonitrile, confirmed by ¹H-NMR analysis of the samples of poly(methyl methacrylate) formed from copolymers of 2-NM and MMA.     

A study of the copolymerization of hydroxyethyl methacrylate and tetrahydrofurfuryl methacrylate

The free radical copolymerizations of hydroxyethyl methacrylate and tetrahydrofurfuryl methacrylate have been investigated at 50°C. The compositions of polymers prepared at low conversions have been determined using ¹³C-NMR, and the glass transition temperatures determined by DSC. The copolymerizations were found to be best described by a terminal model with reactivity ratios of r_H = 1.79 and r_T = 0.76. The triad fraction sequence distributions have been calculated based on the terminal model and the calculated reactivity ratios. The glass transitions have been fitted to the Gordon–Taylor equation. The best value of the Gordon–Taylor constant was found to be k_H = 1.42 ± 0.2, indicating nonideal mixing of the two monomer components in the copolymers. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 3730–3737, 1999     

Synthesis and characterization of chitosan-g-glycidyl methacrylate with methyl methacrylate

In this work, the properties of chitosan (CTS) and synthetic polymers are combined to produce a novel hybrid synthetic-natural material. Poly(methyl methacrylate) (PMMA) and glycidyl methacrylate (GMA) are reacted with CTS to produce a versatile material for dental filler applications. This process involves the synthesis of CTS-g-GMA that is further reacted with PMMA [(CTS-g-GMA)-g-PMMA]. The chemical structure and physical properties of the resulting materials is analyzed by FTIR, DSC, SEM, NMR and XRD. The results revealed the evidence of strong intermolecular interactions between CTS-g-GMA and PMMA by covalent bonding formation. Thermal stability of the final copolymer [(CTS-g-GMA)-g-PMMA] is higher than its precursor, CTS-g-GMA. Presented results show a simple route to produce natural-synthetic polymers for potentially useful applications.     

Thermal behaviour of copolymers of methyl methacrylate and 2-ethylhexyl methacrylate

Five copolymer samples containing different mole fractions of methyl methacrylate (MMA) and 2-ethylhexyl methacrylate (EHMA) were prepared by bulk polymerisation at 70°C using 0.2% benzoyl peroxide as an initiator. The copolymer composition was determined by¹H NMR spectroscopy. Molecular weight of copolymers was determined by gel permeation chromatography and viscosity measurements. Thermogravimetric experiments were conducted to evaluate activation energy for the degradation of copolymers. Two to four reaction stages for the weight loss were observed in the copolymers. A decrease in thermal stability was observed by an increase in EHMA content.     

Water diffusion in methacrylate based copolymer hydrogels of 2-hydroxyethyl methacrylate

The diffusion of water into cylinders of polyHEMA and copolymers of HEMA with THFMA, BMA and CHMA were studied over a range of copolymer compositions. The diffusion of water into the polymers was found to follow a Fickian, or case I mechanism. The diffusion coefficients of water were determined from mass measurements and NMR imaging studies. They were found to vary from 1.7 ± 0.2 x 10⁻¹¹ m² s⁻¹ for polyHEMA at 37°C to lower values for the copolymers. The mass of water absorbed at equilibrium relative to the mass of dry polymer varied from 52-58 wt% for polyHEMA to lower values for the copolymers.     

Copolymerization of methyl methacrylate with lauryl methacrylate using group transfer polymerization

The syntheses of random and block copolymers (using sequential monomer addition) of methyl methacrylate (MMA) and lauryl methacrylate (LMA) have been investigated by group transfer polymerization (GTP) over a wide composition range using tetrabutylammonium bibenzoate (TBABB) as catalyst and 1-methoxy-1-(trimethylsiloxy)-2-methyl-1-propene (MTS) as initiator in tetrahydrofuran (THF) at room temperature. The absolute molecular weight of the copolymers were determined by SEC-MALLS. The observed molecular weights were generally higher than the calculated molecular weights. However, the molecular weight distributions were very narrow (1.02–1.1). Use of trimethylsilyl benzoate as a “livingness enhancer” improved the livingness of the first block (PLMA) and block copolymers with no detectable contamination of homopolymer. Statistical copolymers of MMA and LMA were prepared, and the reactivity ratios of the two monomers under the defined conditions were determined. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1999–2007, 1997     

Methyl methacrylate oligomerically-modified clay and its poly(methyl methacrylate) nanocomposites

A methyl methacrylate oligomerically-modified clay was used to prepare poly(methyl methacrylate) clay nanocomposites by melt blending and the effect of the clay loading level on the modified clay and corresponding nanocomposite was studied. These nanocomposites were characterized by X-ray diffraction, transmission electron microscopy, thermogravimetric analysis and cone calorimetry. The results show a mixed intercalated/delaminated morphology with good nanodispersion. The compatibility between the methylacrylate-subsituted clay and poly(methyl methacrylate) (PMMA) are greatly improved compared to other oligomerically-modified clays.     

Block copolymers of dodecafluoroheptyl methacrylate and butyl methacrylate by RAFT miniemulsion polymerization

Reversible addition‐fragmentation chain transfer (RAFT) miniemulsion polymerization of butyl methacrylate (BMA) and dodecafluoroheptyl methacrylate (DFMA) was carried out with 2‐cyanoprop‐2‐yl dithiobenzoate (CPDB) as chain transfer agent (CTA). Concentration effects of RAFT agent and initiator on kinetics and molecular weight were investigated. No obvious red oil layer (phase's separation) and coagulation was observed in the first stage of homopolymerization of BMA. The polymer molecular weights increased linearly with the monomer conversion with polydispersities lower than 1.2. At 75 °C, the monomer conversion could achieve above 96% in 3 h with [momomer]:[RAFT]:[KPS] = 620:4:1 (mole ratio). The results showed excellent controlled/living polymerization characteristics and a very fast polymerization rate. Furthermore, the synthesis of poly(BMA‐b‐DFMA) diblock copolymers with a regular structure (PDI < 1.30, PMMA calibration) was performed by adding the monomer of DFMA at the end of the RAFT miniemulsion polymerization of BMA. The success of diblock copolymerization was showed by the molecular weight curves shifting toward higher molar mass, recorded by gel permeation chromatography before and after block copolymerization. Compositions of block copolymers were further confirmed by ¹H NMR, FTIR, and DSC analysis. The copolymers exhibited a phase‐separated morphology and possessed distinct glass transition temperatures associated with fluoropolymer PDFMA and PBMA domains. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1585–1594, 2007     

Graft copolymerization of 2-hydroxyethyl methacrylate and methyl methacrylate onto hide powder

Graft copolymerization of 2-hydroxyethyl methacrylate(HEMA) and mixtures of HEMA with methyl methacrylate (MMA) onto hide powder was attempted using ceric ammonium nitrate as initiator, with a view to optimize the conditions for graft copolymerization. Percent grafting and grafting efficiency were calculated for various variables such as monomer concentration, initator concentration and mole ratio of HEMA to MMA. R_p, R_g and R_h (rates of polymerization, grafting and homopolymerization respectively) were also evaluated. It was observed that R_p increased linearly with increasing concentration of MMA except at very low concentrations of the monomer. An explanation is given for the effect of variables on extent of grafting and grafting efficiency.     

Thermal behaviour of copolymers of methyl methacrylate and iso-octyl/iso-decyl methacrylate

Thermal behaviour of copolymers of methyl methacrylate (MMA) with iso-octyliso-decyl methacrylate was investigated using dynamic thermogravimetry, mass spectroscopy and pyrolysis gas chromatography. The copolymer samples were stable upto 250 °C. Total loss in weight was observed around 400 °C. The degradation in homopolymers as well as copolymers proceeded by predominans loss of monomer.

---

Zusammenfassung Mittels dynamischer Thermogravimetrie, Massenspektroskopie und Pyrolysengaschromatographie wurde das thermische Verhalten von Kopolymeren aus Methylmethacrylat (MMA) und Isooktyl/Isodecyl-methacrylat untersucht. Die Kopolymerproben waren bis 250 °C stabil. Ein vollständiger Gewichtsverlust wurde bei 400 °C beobachtet. Der Abbau sowohl der Homopolymere als auch der Kopolymere erfolgt durch eine überwiegende Abgabe von Monomeren.

---

, - /- . /- . 250°. 400°. , .

     

Preparation of methacrylate monoliths

Rigid macroporous polymers developed in the early 1990s are widely used as efficient stationary phases for all types of chromatographic separations. The main advantages of so-called monolithic supports are their high hydraulic permeability and the dominance of the convection over the diffusion mechanism of mass-exchange under dynamic conditions that allow the separation to be carried out at extremely high flow rates and, consequently, during very short operation times. Among other types of macroporous polymers, the methacrylate-based monolithic materials represent the most popular and successfully explored class of sorbents. This review is an attempt to collect together the contributions of different groups working in the area of monolith preparation. Examples of different methcrylate monomers and crosslinkers, as well as porogenic solvents, including polymer ones, used in monolith preparation are discussed.     

Statistical copolymers of styrene and 2-vinylpyridine with trimethylsilyl methacrylate and trimethylsilyloxyethyl methacrylate

Statistical copolymers of styrene with trimethylsilyl methacrylate, STMS, and trimethylsilyloxyethyl methacrylate, STME, and of 2-vinylpyridine with trimethylsilyloxyethyl methacrylate, VTME were prepared by free radical copolymerization in benzene with 2,2′-azobisisobutyronitrile, AIBN. The reactivity ratios of the different monomers were estimated using the Finemann-Ross, the inverted Finemann-Ross, and the Kelen-Tüdos or the extended Kelen-Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the diad sequence fractions, which were derived using the monomer reactivity ratios. The results were compared with those obtained from the copolymerization of styrene and 2-vinylpyridine with methacrylic acid and 2-hydroxyethyl methacrylate.     

Radiation degradation of copolymers of methyl methacrylate and 3-oximino-2-butanone methacrylate

Copolymers of methyl methacrylate and 3-oximino-2-butanone methacrylate (OM) were investigated as deep-UV and e-beam resists. Their increased sensitivity relative to PMMA (up to 50 times) was correlated with the radiation chemical yields of the volatile products and main chain scissions. The degradation of these copolymers, activated by the 3-oximino-2-butanone entity, is discussed in terms of energy absorption mechanisms and the subsequent scission reactions.     

pH‐Sensitive methacrylic acid–methyl methacrylate copolymer Eudragit L100 and dimethylaminoethyl methacrylate,butyl methacrylate,and methyl methacrylate tri‐copolymer Eudragit E100

Poly (methyl methacrylate) derivatives such as Eudragit are largely used for drug encapsulation and in controlled oral drug delivery. With special focusing on those applications, solubilization and precipitation conditions of two pH‐sensitive Eudragit polymers, namely, L100 and E100, were investigated via systematic studies. Effects of various physicochemical parameters such as pH, polymer concentration, salinity, buffer concentration, and incubation time on the solubilization and precipitation of these polymers were investigated. In addition, pH titration of both polymers was reported. Considering both macroscopic and quantitative aspects such as the final mean particle size, size distribution, morphology, and the zeta potential, it was established that the different precited parameters could not be dissociated and exert a synergic action on the solubilization and precipitation of both polymers. Titration curves revealed two equivalences that helped estimating carboxylic content of Eudragit L100 (6 mmol/g) and ammonium content of Eudragit E100 (4 mmol/g). In this study, the solubilization and the precipitation domains were for the first time clearly established by considering the above‐mentioned parameters. Moreover, it was found that Eudragit L100 and E100 cannot be considered as classic polyelectrolytes; in fact, solubilization and precipitation domains were not affected by ionic strength.     

Thermal degradation of zinc polymethacrylate and a zinc methacrylate/methyl methacrylate copolymer

Methyl methacrylate and zinc methacrylate have each been polymerised in methanol solution using azodiisobutyronitrile as initiator and a copolymer of the two monomers has been prepared in the same medium.The degradation behaviour of the three materials has been studied using TG and TVA, volatile products have been investigated by infra-red and GLC analysis and infra-red spectroscopic examination of structural changes in the partially degraded polymer has been carried out for zinc polymethacrylate (ZnPMA).The breakdown of ZnPMA shows many similarities to the behaviour of the alkaline earth polymethacrylates. The effect of introducing ZnMA units into the PMMA chain by copolymerisation is to stabilise the chain considerably and to modify the degradation behaviour of the MMA units, so that methanol and carbon monoxide, resulting from side group scission, become major products in addition to MMA monomer; the ZnMA units in the copolymer behave in the same way as in ZnPMA.This study provides support for the mechanism previously proposed for the degradation of PMMA/ZnBr₂ blends, in which the ZnMA/MMA copolymer structure was regarded as an intermediate stage in the reaction.     

Preparation and degradation of copolymers of methyl methacrylate with alkali metal methacrylates—I. Copolymerization parameters for the systems methyl methacrylate-lithium methacrylate,methyl methacrylate-sodium methacrylate and methyl methacrylate-potassium methacrylate

Copolymerizations of methyl methacrylate with the Li, Na and K salts of methacrylic acid have been studied in methanol solution at 60°. Reactivity ratios have been calculated by the methods due to Mayo and Lewis, Fineman and Ross and Peckham. The rate of copolymerization decreases as the size of the metal cation increases, in contrast to the behaviour in the homopolymerization of the alkali metal methacrylates. The systems have the following reactivity ratios (MMA as monomer-1): Li salt r₁ = 0.59, r₂ = 0.073; Na salt r₁ = 3.97, r₂ = 0·126; K salt r₁ = 5.65, r₂ = 0.143. The MMA-LiMA system shows azeotropic copolymerization for a mole fraction of MMA in the feed equal to 0.7. This system shows a strong tendency towards alternation (r₁r₂ = 0.044). The differences in the reactivity ratios are discussed in relation to steric and electrostatic effects.