Redox,ionic strength,and pH sensitive supramolecular polymer assemblies

Formation of micelle‐type assembly from supramolecular complexation of a surfactant and an oppositely charged homopolymer is demonstrated. The lower CAC observed for these assemblies suggest that the electrostatic interaction provides an amphiphilic homopolymer‐like structure. The stimulus‐induced disassembly of these supramolecular structures has been accomplished with variations in redox characteristics, ionic strength, and pH of the medium. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1052–1060, 2009     

Synthesis and characterization of stimuli‐sensitive micro‐ and nanohydrogels based on photocrosslinkable poly(dimethylaminoethyl methacrylate)

The aim of this work was the development of a versatile route for the preparation of temperature‐ and pH‐responsive hydrogels with small dimensions. The copolymerization of N,N‐dimethylaminoethyl methacrylate with various amounts (5 and 10 mol %) of dimethylmaleimidoethyl methacrylate in solution with 2,2′‐azobisisobutyronitrile as an initiator is described. The structural and molecular characterization of the copolymers was performed with proton nuclear magnetic resonance, Fourier transform infrared, and ultraviolet spectroscopy, as well as size exclusion chromatography. Differential scanning calorimetry and thermogravimetry were used for the thermal characterization of the copolymers. Micro‐ and nanohydrogels of the copolymers were prepared by photocrosslinking. The gels obtained by photocrosslinking were characterized with a combination of surface plasmon resonance and optical waveguide spectroscopy, dynamic light scattering, and scanning electron microscopy. The hydrogels showed temperature‐ and pH‐responsive behavior. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 669–679, 2007     

pH/temperature double responsive behaviors and mechanical strength of laponite‐crosslinked poly(DEA‐co‐DMAEMA) nanocomposite hydrogels

A nanocomposite (NC) hydrogel crosslinked by inorganic Laponite XLG was successfully synthesized via in situ free radical polymerization of monomers N,N‐diethylacrylamide and (2‐dimethylamino) ethyl methacrylate (DMAEMA). Polymerization was carried out at room temperature due to the accelerating effect of DMAEMA. The as‐prepared hydrogels displayed controlled transformation in optical transmittance and volume in response to small diversification of environmental factors, such as temperature and pH. The compressive strength of swollen D_6:1G₆ hydrogels was as high as 2219 kPa while compressive strain was 95%. Cyclic compression measurement exhibited good elastic properties of NC hydrogels. This work provides a facile method for fabricating stimuli‐responsive hydrogels with superior mechanical property. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 876–884     

Temperature and pH sensitive ionic hydrogels based on new crosslinkers

New crosslinkers were synthesized from reaction of melamine with acryloyl and methacryloyl chloride in the presence of 1‐methyl‐2‐pyrrolidone as a solvent and triethyl amine as acid acceptor. The chemical structures of the prepared crosslinkers were elucidated from FT‐IR, ¹H‐NMR and ¹³C‐NMR analyses. Linear 2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid and methacrylic acid (AMPS/MAA) copolymers were prepared and their viscometric properties in aqueous solution were investigated. Different weight percentages of the prepared crosslinkers were used as crosslinking agent (AMPS/MAA) to prepare ionic copolymers using ammonium persulfate as initiator. The percentage of crosslinkers was varied from 0.5 to 4 wt%. The swelling behaviors of crosslinked AMPS/MAA gels in deionized water were measured at different pH and temperatures. All AMPS/MAA copolymers exhibit faster deswelling rate at 50°C except for the copolymer containing 0.9 (mol ratio) AMPS. Copyright © 2005 John Wiley & Sons, Ltd.     

Thermoresponsive Copolymers of Ethylene Oxide and N,N‐Diethyl Glycidyl Amine: Polyether Polyelectrolytes and PEGylated Gold Nanoparticle Formation

The synthesis of diblock as well as gradient copolymers of N,N‐diethyl glycidyl amine (DEGA) with ethylene oxide (EO) via anionic ring‐opening polymerization is presented. The polymers exhibit low polydispersities (≤1.13) and molecular weights in the range of 3300–10 200 g mol⁻¹. In PEG‐co‐PDEGA copolymers, incorporation of 4%–29% DEGA results in tailorable cloud point temperatures in aqueous solution and melting points depending on DEGA content. mPEG‐b‐PDEGA block copolymers can be quaternized to generate cationic double‐hydrophilic polyelectrolyte copolymers with polyether backbone. Furthermore, mPEG‐b‐PDEGA has been used as dual reducing and capping agent for gold nanoparticle synthesis.     

Photoresponsive oil sorbers

A photoresponsive oil sorber (POS) with a hydrophobic, photoresponsive core and shell has been synthesized via suspension polymerization. Lauryl acrylate, isodecyl acrylate, and tert‐butylstyrene were used as monomers, 4‐(methacrylamino)azobenzene (Azo‐M) used as photoresponsive monomer, and bis(methacryloylamino)azobenzene (Azo‐CL‐M) used as photoresponsive surface crosslinker. The POS prefers nonpolar solvents. It absorbed 15 times its dry weight in toluene, 19 times its dry weight in chloroform, and 16 times its dry weight in dichloromethane. Rapid and photoresponsive desorption of solvent (86% of solvent expulsed in 30 min) was characteristic. POS is an excellent gasoline absorber rapidly increasing its body weight in its presence. The new POS is less dense than water, and can potentially be used for cleaning oil spills on water. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 55–62, 2010     

Catch and Release of DNA in Coacervate‐Dispersed Gels

Summary: We have synthesized novel coacervate‐droplet gels, which were applied to controlling the transportation of DNA in electrophoresis. Coacervate droplets are colloidal particles and they are usually composed of positive and negative polyelectrolytes. However, the polyzwitterion (polyampholyte) PDMAPS can form coacervate droplets in water by itself, since PDMAPS has both positive and negative charges in each side group of main chain. Coacervate droplets have a unique nature and can catch charged macromolecules such as DNA. In order to utilize the nature of the PDMAPS coacervate droplets for the catch and release of DNA, we stabilized PDMAPS droplets in gels. The droplets catch the DNA in electrophoresis and the release of DNA can be controlled by temperature and salt addition.

Electrophoresis of DNA, using coacervate‐dispersed PAAm gels, prepared at various PDMAPS concentrations. The circles indicate the PAAm gels embedded in agarose gels.     

Synthesis and aqueous solution properties of hydrophobically modified anionic acrylamide copolymers

In this investigation, hydrophobically modified polyacrylamide with low amounts of anionic long‐chain alkyl was synthesized by the free radical polymerization in deionized water. This water‐soluble copolymerization method is more convenient compared with the traditional micellar copolymerization methods. The copolymers were characterized using Fourier transform infrared, ¹H NMR, and the molecular weight and polydispersity were determined using gel permeation chromatography. The solution behavior of the copolymers was studied as a function of composition, pH, and added electrolytes. As NaCl was added to solutions of AM/C₁₁AM copolymers or pH was lowered, the shielding or elimination of electrostatic repulsions between carboxylate groups of the C₁₁AM unit lead to coil shrinkage. The steady shear viscosity and dynamic shear viscoelastic properties in semidilute, salt‐free aqueous solutions were conducted to examine the concentration effects on copolymers. In addition, the shear superimposed oscillation technique was used to probe the structural changes of the network under various stresses or shear conditions. We prepared hydrophobically modified polyacrylamide with N‐alkyl groups in the aqueous medium. The advantage of this method is that the production is pure without surfactants. These results suggest that the unique aqueous solution behavior of the copolymers is different from conventional hydrophobically associating acrylamide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2465–2474, 2008     

Micelles possessing mixed cores and thermoresponsive shells fabricated from well‐defined amphiphilic ABC miktoarm star terpolymers

Amphiphilic ABC miktoarm star terpolymers consisting of polystyrene, poly(ε‐caprolactone), and poly(N‐isopropylacrylamide) arms, PS(‐b‐PNIPAM)‐b‐PCL, were synthesized via a combination of atom transfer radical polymerization, ring‐opening polymerization (ROP), and click chemistry. Difunctional PS bearing an alkynyl and a primary hydroxyl moiety at the chain end, PS‐alknyl‐OH, was prepared by reacting azido‐terminated PS with an excess of 3,5‐bis(propargyloxy)benzyl alcohol (BPBA) under click conditions. The subsequent ROP of ε‐caprolactone using PS‐alknyl‐OH macroinitiator afforded PS(‐alkynyl)‐b‐PCL copolymer bearing an alkynyl moiety at the diblock junction point. Target PS(‐b‐PNIPAM)‐b‐PCL amphiphilic ABC miktoarm star terpolymers were then prepared via click reaction between PS(‐alkynyl)‐b‐PCL and an excess of azido‐terminated PNIPAM (PNIPAM‐N₃). The removal of excess PNIPAM‐N₃ was accomplished by “clicking” onto alkynyl‐functionalized Wang resin. All the intermediate and final products were characterized by gel permeation chromatography, ¹H NMR, and FTIR. In aqueous solution, the obtained amphiphilic ABC miktoarm star terpolymer self‐assembles into micelles possessing mixed PS/PCL cores and thermoresponsive shells, which were further characterized by dynamic laser light scattering and transmission electron microscopy. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1636–1650, 2009     

Macroporous Poly(N-isopropylacrylamide) hydrogels with adjustable size "cut-off" for the efficient and reversible immobilization of biomacromolecules

Poly(N-isopropylacrylamide) (PNIPA) hydrogels with varied degree of crosslinking (DC) were synthesized by using poly(ethylene glycol) (PEG) as an additive. A phase separated ("macroporous") morphology was formed when using PEG contents of > or = 20 wt.-%. Temperature-dependent degrees of swelling had been measured, and average mesh sizes of the swollen polymer network had been calculated. The loading of the hydrogels with labelled dextrans with various molar masses and bovine serum albumin (BSA)-via swelling of the shrunken gel in a cold solution-and their subsequent unloading-via immersion in hot water-were studied in detail. The loading efficiencies were close to zero for PNIPA prepared at PEG contents of < or = 10 wt.-%, and they increased sharply to about 100% for PNIPA prepared with PEG contents of > or = 20 wt.-%. A complete unloading was achieved as well. For macroporous PNIPA prepared at 40 wt.-% PEG content, the loading efficiency was a function of the DC, and the "cut-off" observed as a function of dextran or protein size correlated with the mesh size of the hydrogel. The function of these "smart" hydrogels can be explained by the temperature-induced "pumping" of the solution into the gel bulk via the permanent pores, along with an uptake into the adjacent hydrogel network. Those materials could be used as matrices for the efficient and reversible immobilization of (bio)macromolecules.     

Synthesis of backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s through proton‐transfer polymerization

Stimuli‐responsive hyperbranched polymers have attracted great attention in recent years because of their wide applications in biomedicine. Through proton‐transfer polymerization of triethanolamine and 1,2,7,8‐diepoxyoctane with the help of potassium hydride, a series of novel backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s were prepared successfully in one‐pot. The degrees of branching of the resulting polymers were at 0.40–0.49. Turbidity measurements revealed that hyperbranched poly(amine‐ether)s exhibited thermo and pH dual‐responsive properties in water. Importantly, these responsivities could be readily adjusted by changing the polymer composition as well as the polymer concentration in aqueous solution. Moreover, in vitro evaluation demonstrated that hyperbranched poly(amine‐ether)s showed low cytotoxicity and efficient cell internalization against NIH 3T3 cell lines. These results suggest that these backbone thermo and pH dual‐responsive hyperbranched poly(amine‐ether)s are promising materials for biomedicine. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Charged polypeptide diffusion at a very high ionic strength

Two charged polypeptides of opposite charge, poly(glutamic acid) (negative charge) and polylysine (positive charge), were end-labeled with Alexa fluorescent dyes, and their translational diffusion coefficient (D) values in dilute solutions (∼10⁻⁴ mg mL⁻¹) were studied at the biological pH with fluorescence correlation spectroscopy as a function of the ionic strength (C_s) mediated by the addition of NaCl. At a moderate ionic strength, D increased consistently with expected chain contraction because of electrostatic screening. At a very high ionic strength, D of poly(glutamic acid) increased more rapidly, following the empirical power law R_H ∼ C_s^−1/2 over a limited range of C_s, where the changes in D were interpreted as changes in the hydrodynamic radius, R_H. However, D of polylysine at first decreased but eventually passed through a maximum followed by a decrease. These large increases implied that R_H decreased considerably, in turn implying a strong contraction of the chain conformations even though the polymer remained soluble and showed no evidence of aggregation. For polylysine, the unexpected minimum R_H value may be related to the salting-in phenomenon. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3497–3502, 2005     

Thermoresponsive conductivity of poly(N‐isopropylacrylamide)/potassium chloride gel electrolytes

A series of thermoresponsive polymer gel electrolytes (PGEs) based on poly(N‐isopropylacrylamide) in aqueous potassium chloride was synthesized by radiation‐induced polymerization and gelation using γ rays from a ⁶⁰Co source. The electric conductivity and swelling properties of the PGE were determined as a function of temperature. It was found that the electric conductivity of the PGE depended strongly on the swelling ratio; most notably, it changed drastically near the volume phase‐transition temperature of the PGE. The temperature/conductivity profile of the PGE exhibits a maximum peak at a certain temperature that is defined as the maximum conductivity temperature (T_max). The T_max of all of the PGEs prepared by low‐dose irradiation agreed with the temperature, near the end of the volume phase transition, where the PGE was completely shrunken. Consequently, the conductivity of gels should provide a good method with which the totally shrunken temperature of the thermoresponsive gels can be monitored with good temperature precision. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 134–141, 2002     

Stimuli‐responsive cationic terpolymers by RAFT polymerization: Synthesis,characterization, and protein interaction studies

The controlled synthesis and characterization of a range of stimuli responsive cationic terpolymers containing varying amounts of N‐isopropylacrylamide (NIPAM), 3‐(methylacryloylamino)propyl trimethylammonium chloride (MAPTAC), and poly(ethylene glycol)monomethyl methacrylate (PEGMA) is presented. The terpolymers were synthesized using reversible addition‐fragmentation chain transfer (RAFT) polymerization. Compositions of the terpolymers determined using ¹H NMR were in close agreement to the theoretical values determined from the monomer feed ratios. GPC‐MALLS was used to analyze the molecular weight characteristics of the polymers, which were found to have low polydispersities (M_w/M_n 1.1–1.4). The phase transitions were studied as a function of PEGMA and NIPAM content using temperature controlled ¹H NMR and turbidity measurements (UV‐Vis). The relationship between thermal stability and the comonomer ratio of the polymers was measured using thermogravimetric analysis (TGA). Protein interaction studies were performed to determine the suitability of the polymers for biological applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4021–4029, 2008     

Self‐immolative nanoparticles triggered by hydrogen peroxide and pH

The azomethine‐based oligomers bearing boronate groups and imine moieties in the main chain were synthesized from a dialdehyde monomer and an aromatic (oligomer 4 ) diamine or an aliphatic diamine (oligomer 5 ). Based on the oligomers, the nanoparticles with hydrogen peroxide (H₂O₂) and pH dual‐responsive properties were constructed and encapsulated nile red inside. The nanoparticles disassembled either by the trigger of H₂O₂ or by the attack of H⁺, thus leading to the release of loaded species. Compared to oligomer 4 , oligomer 5 showed a faster degradation rate in the presence of H₂O₂, especially in a weak acidic environment. No significant cytotoxicity was observed as HeLa cells incubated in the nanoparticles with the concentration up to 200 μg/mL evidenced by cytotoxicity assay in vitro. Such a system capable of dual response of H₂O₂ and H⁺ may have potential application as a carrier for drug delivery. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1962–1969     

Novel reversible thermoresponsive nanogel based on poly(ionic liquid)s prepared via RAFT crosslinking copolymerization

In this study, a facile strategy for the preparation of thermo‐ and pH‐responsive nanogels through reversible addition–fragmentation transfer (RAFT) crosslinking copolymerization of ionic liquid‐based monomers is demonstrated. The use of chain transfer agents (CTAs) containing carboxyl group in the RAFT polymerizations is the key to producing highly thermoresponsive nanogels. Experimental results demonstrate that the critical gelation temperature of the as‐prepared nanogels can be tuned by adjusting the feed ratio of monomer and CTA. Variable temperature Fourier transform infrared measurements and control experiments indicate that hydrogen‐bonding interactions between the carboxyl groups of CTAs are responsible for the thermoresponsive behaviors of poly(ionic liquid) (PIL)‐based nanogels. Furthermore, PIL‐based nanogels are also found to be pH‐sensitive, and can be further decorated by poly(N‐isopropylacrylamide) (PNIPAAm) via surface grafting polymerization. PNIPAAm‐grafted nanogel aqueous solutions can be reversibly transformed into macrogels upon a change in temperature. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 169–178     

Swelling and shrinking of polyelectrolyte microcapsules in response to changes in temperature and ionic strength

Swelling and shrinking of polyelectrolyte microcapsules consisting of poly(styrene sulfonate, sodium salt) (PSS) and poly(diallyldimethyl ammonium) chloride (PDADMAC) multilayers have been observed in response to temperature and electrolyte exposure, respectively. Heat-induced capsule swelling and capsule wall volume reduction were observed by confocal laser scanning microscopy (CLSM) and scanning force microscopy (SFM). On the other hand, pronounced shrinking in diameter induced by exposure to an electrolyte was observed in parallel to increases in the thickness of the capsule wall. The estimated wall volume was reduced to two thirds of the control for the salt-exposed capsules and one half for the salt-exposed and simultaneously annealed capsules. This reduction in volume was supposedly mainly caused by the compression of the capsule wall due to the ionic screening from the electrolyte. The highly porous microstructure of the multilayers and loosely bound PSS/PDADMAC complex are thought to be responsible for the structure of the PSS/PDADMAC capsules being easily modulated upon annealing and salt-exposure.     

Prepolymerization and postpolymerization functionalization approaches to fluorescent conjugated carbazole‐based glycopolymers via “click chemistry”

Facile prepolymerization and postpolymerization functionalization approaches to prepare well‐defined fluorescent conjugated glycopolymers through Cu(I)‐catalyzed azide/alkyne “Click” ligation were explored. Two well‐defined carbazole‐based fluorescent conjugated glycopolymers were readily synthesized based on these strategies and characterized by ¹H NMR, ¹³C NMR, IR spectra, and UV‐vis spectra. The “Click” ligation offers a very effective conjugation method to covalently attach carbohydrate residues to fluorescent conjugated polymers. In addition, the studies of carbohydrate–lectin interactions were performed by titration of concanavalin A (Con A) to D ‐glucose‐bearing poly(anthracene‐alt‐carbazole) copolymer P‐2 resulting in significant fluorescence quenching of the polymer due to carbohydrate–lectin interactions. When peanut agglutinin (PNA) was added, no distinct change in the fluorescent properties of P‐2 was observed. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2948–2957, 2009