Thermal,structural and electrical properties

The chloro compound of 3-hydroxy-2-quinoxalinecarboxylic acid with nickel(II) has been prepared in ethanolic solution from which a solid compound was isolated. Spectral and magnetic measurements show that the nickel ions are in an octahedral environment. Thermogravimetry, differential thermal analysis and electrical conductivity data are reported for 3-hydroxy-2-quinoxalinecarboxylic acid and its nickel complex. The conductivity measurements indicate that electron/hole traps are emptied during heating of the complex but repopulation occurs in about 24 h at room temperature.     

Ab-initio study of electronic,optical, thermal,and transport properties of Cr4AlB6

Theoretical investigation of different physical parameters of Cr₄AlB₆ have been done within the framework of density functional theory. Cr₄AlB₆ is a no band gap material. Its Cr-3d states contributes the most at the Fermi level. Thermal properties are investigated using quasi-harmonic Debye model as implemented in Gibbs code for different values of pressure and temperature. Study of transport property suggests that its electrical conductivity increases nonlinearly with increase in temperature but the relative change in its value is very low whereas its thermal conductivity increases linearly with the increase in temperature and relative increase in thermal conductivity is very high. The behavior of Cr₄AlB₆ is anisotropic and property is ceramic. It has potential applications in making ceramic capacitors. Its reflectivity is high in low energy region. It suggests that material can be used as coating material for far-infrared radiation. Study of the transport property suggests that because of very high value of thermal conductivity, it can be used for heat sink applications.     

Tetrametallic macrocyclic frameworks constructed from ferrocenedicarboxylato and 2,2-bipyridine: synthesis, molecular structures and characteristics

Four novel tetranuclear macrocyclic compounds [Cd₂(η²-O₂CFcCO₂)₂(2,2^′-bpy)₂(H₂O)₂] · 2H₂O (1), [Zn₂(η²-O₂CFcCO₂)₂(2,2^′-bpy)₂(H₂O)₂] · CH₃OH · H₂O (2), [Co₂(O₂CFcCO₂)₂(2,2^′-bpy)₂(μ₂-OH₂)₂] · CH₃OH · 2H₂O (3), and [Ni₂(O₂CFcCO₂)₂(2,2^′-bpy)₂(μ₂-OH₂)₂] · CH₃OH · 2H₂O (Fc=(η⁵-C₅H₄)Fe(η⁵-C₅H₄) (4) have been synthesized and structurally characterized by single crystal diffraction. The magnetic behaviors for compounds (3) and (4) are studied in the temperature range of 5.0-300 K. The results show that the antiferromagnetic coupling of Co^II-Co^II pairs occurs in (3), and unusual global ferromagnetic coupling between nickel (II) ions exists in (4). The solution-state differential pulse voltammetries of compounds (1)-(4) all show two peaks with large separations (ΔE) that indicate strong interactions between two ferrocene moieties. Their fluorescent and thermal properties were also investigated.     

Physical and excess properties of binary and ternary mixtures of 1,1-dimethylethoxy-butane, methanol, ethanol and water at 298.15 K

The ternary systems 1,1-dimethylethoxy-butane (BTBE) + methanol + water and BTBE + ethanol + water have large heterogeneous zones. Experimental densities, refractive indices and speeds of sound have been measured at 298.15 K for mixtures of these systems within the homogeneous zone, and also for methanol + BTBE and ethanol + BTBE binary systems over the entire range of compositions. Excess molar volumes and molar refraction and isentropic compressibility changes of mixing were calculated from the experimental physical properties and were satisfactorily correlated with the corresponding composition data using the Redlich-Kister polynomial. Fitted coefficients and mean standard deviations of correlations have been reported.     

Synthesis and characterization of hyperbranched aromatic polyamide copolymers prepared from AB2 and AB monomers

A series of hyperbranched aromatic polyamide copolymers has been prepared and characterized from direct polycondensation of AB₂ and AB monomers. Structure of the monomers and the molar ratio of AB₂/AB showed strong influence on the properties of resulting copolymers. A small amount of AB₂ branching unit improved markedly the solubility of the resulting copolymer. Mark-Houwink parameters of the copolymers were essentially independent of the mole ratio of the monomers. The physical and mechanical properties of resulting copolymers were influenced not only by the mole ratio of monomers, but also by the structure of the monomers employed.     

Tough and transparent blends of polylactide with block copolymers of ethylene glycol and propylene glycol

In order to modify its physical properties, particularly the drawability and toughness, polylactide (PLA) was melt blended with a set of PEG-b-PPG-b-PEG block copolymers with varying ratio of the hydrophilic (PEG) and hydrophobic (PPG) blocks. Miscibility of the copolymers with PLA depended on their molar mass and PEG content. Interestingly, the best drawability was achieved in the case of partially miscible blends, in which fine liquid inclusions of the modifier were dispersed in PLA rich matrix with glass transition temperature only moderately decreased, to about 50 °C. About 37 fold increase of the elongation at break and about 1.5 fold increase of the tensile impact strength with respect to neat PLA were reached at small content (10 wt.%) of the modifier. Despite the phase separation, the blends remained transparent. In addition, the barrier properties for oxygen were improved.     

Mechanical and Morphological Properties of Bio-Phenolic/Epoxy Polymer Blends

Polymer blends is a well-established and suitable method to produced new polymeric materials as compared to synthesis of a new polymer. The combination of two different types of polymers will produce a new and unique material, which has the attribute of both polymers. The aim of this work is to analyze mechanical and morphological properties of bio-phenolic/epoxy polymer blends to find the best formulation for future study. Bio-phenolic/epoxy polymer blends were fabricated using the hand lay-up method at different loading of bio-phenolic (5 wt%, 10 wt%, 15 wt%, 20 wt%, and 25 wt%) in the epoxy matrix whereas neat bio-phenolic and epoxy samples were also fabricated for comparison. Results indicated that mechanical properties were improved for bio-phenolic/epoxy polymer blends compared to neat epoxy and phenolic. In addition, there is no sign of phase separation in polymer blends. The highest tensile, flexural, and impact strength was shown by P-20(biophenolic-20 wt% and Epoxy-80 wt%) whereas P-25 (biophenolic-25 wt% and Epoxy-75 wt%) has the highest tensile and flexural modulus. Based on the finding, it is concluded that P-20 shows better overall mechanical properties among the polymer blends. Based on this finding, the bio-phenolic/epoxy blend with 20 wt% will be used for further study on flax-reinforced bio-phenolic/epoxy polymer blends.     

Rheological and thermal properties of agarose aqueous solutions and hydrogels

In this article, we report on the rheological properties of agarose aqueous solutions and gels. Viscosity curves were determined for homogeneous agarose aqueous solutions at different temperatures (from 68 to 38 °C) to study the viscosity behavior as the systems undergo gelation. The gelation phenomenon of agarose solutions was also investigated by shear oscillation experiments and differential scanning calorimetry. The gelation and melting temperature as a function of agarose concentration were determined together with the gelation and melting enthalpies. The results obtained were interpreted using the two‐step model describing the gelation of agarose in water. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 322–328, 2008     

Antiwear,Antiseize and Antioxidising Properties of Operation‐Conservation Oils Modified with Organometal Oil‐Soluble Additives Containing Nitrogen and Oxygen

The present work aims at studying the antiwear, antiseize and antioxidising properties of anode‐shielding corrosion inhibitors. The physicochemical properties of the inhibitors and those of the operation‐conservation motor oils modified with them were determined. It was found that these inhibitors improve the antiwear, antiseize and antioxidising properties of the motor oils obtained. Real‐life experiments were carried out with a four‐stroke four‐cylinder engine (“Skoda” Czech Republic) mounted on a 30‐ton fishing barge which uses diesel fuel containing up to 1,4% sulphur. The antiwear and antioxidising properties of the oils obtained were determined, and a probable action mechanism of the complex corrosion inhibitors was suggested.     

Elastic, electronic and thermal properties of YSZ from first principles

First principles calculations were performed to investigate the elastic, electronic and thermal properties of 14% cubic yttria-stabilized zirconia (YSZ) using the pseudo potential plane-wave method within the gradient generalized approximation (GGA) for the exchange and correlation potential. Computed lattice constant parameters are in good agreement with the available experimental results. The three independent elastic constants were computed by means of the stress-strain method, indicating that 14% cubic YSZ is a mechanically stable structure. From the knowledge of the elastic constants, a set of related properties, namely bulk, shear modulus, Young’s modulus, sound velocity, Debye temperature, thermal capacity and minimum thermal conductivity are numerically estimated in the frame work of the Voigt-Reuss-Hill approximation for YSZ polycrystalline. The calculated bulk modulus, shear modulus, Young’s modulus, sound velocity, Debye temperature, thermal capacity and minimum thermal conductivity are in reasonable agreement with the available experimental and theory data. Density of states, charge density and Mulliken population analysis show that the 14% cubic YSZ is covalent and possess ionic character.     

Mechanical and thermal properties of modified bismaleimide matrices toughened by polyetherimides and polyimide

Thermal and mechanical properties such as G_IC (critical strain energy release rate), K_IC (critical stress intensity factor), tensile, and flexural strength of bismaleimide (BMI) matrix toughened by commercially available polyetherimides (Ultem 1000P, Siltem STM 1700, and Extem VH1003) and polyimide P84 were investigated. In case of various contents, polyetherimides soluble in BMI phase separation was observed. The influence of the toughener amount on the mechanical properties of the matrices was studied. It was shown that Ultem and Siltem had a more significant influence on the G_IC and K_IC parameters than the more thermally stable P84 and Extem. Copyright © 2015 John Wiley & Sons, Ltd.     

Ferromagnetism and structural deformation in monolayer alpha lead oxide induced by N and F doping: New insights from first principles

We study the structural, electronic, and magnetic properties of monolayer α-PbO_0.875A_0.125 (A = N, F), which are calculated using first principles. As a result, N doping induces local ferromagnetism centered at the N²⁻ site, originating from the spin-down N 2p valence states. On the other hand, F doping induces nonmagnetism and induces ab-plane deformation, where F⁻ receives one electron to its nearest-neighboring Pb^1.75+ ions. N doping redshifts the bandgap of the undoped system and transforms it to be indirect, while F doping blueshifts the bandgap through the Burstein-Moss effect. The hybridization of Pb 6p and O 2p orbitals is stronger near the A site than that of the crystal structure edge. Our result shows new insights, predicting possible experimental results for future functional device applications.     

新型环膦腈化合物的合成及性能研究

以六氯环三膦腈(HCCP)为原料合成了六(4-苯基苯氧基)三聚膦腈(HPPCP)和六(4-苯基偶氮苯氧基)三聚膦腈(HPDPCP),运用1HNMR、31P NMR、IR等测试技术对其结构进行了表征。TGA结果表明,两种物质具有良好的热稳定性,HPPCP的最大热分解温度高达455℃,HPDPCP残留率高达62·83%(800℃)。同时紫外光谱研究结果表明,极性溶剂使HPDPCP的紫外吸收波长红移。HPPCP和HPDPCP在阻燃材料方面、HPDPCP在线性或非线性光学以及分子信息存储器件等方面有着潜在的应用前景。     

Physico-chemical characterization and anti-laryngeal cancer effects of the gold nanoparticles

Most recently, gold nanoparticles due to anticancer properties have been considered in medical science. So the aim of the study was green synthesis of gold nanoparticles using Ocimum basilicum extract and its anticancer activity. The prepared Au nanoparticles were characterized by advanced physicochemical techniques like Fourier Transformed Infrared spectroscopy (FT-IR), Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy Dispersive X-ray spectroscopy (EDX), X-ray Diffraction (XRD) and UV–vis spectroscopy study. It has been established that Au nanoparticles have a spherical shape with a mean diameter from 19 to 44 nm. In the cellular and molecular part of the recent study, the treated cells with Au nanoparticles were assessed by MTT assay for 48 h about the cytotoxicity and anti-human laryngeal cancer properties on normal (HUVEC) and cancer (HEp-2, TU212, KB, UM-SCC-5, UM-SCC-11A and UM-SCC-11B) cell lines. In the antioxidant test, the IC50 of Au nanoparticles and BHT against DPPH free radicals were 228 and 208 µg/mL, respectively. The IC50 of Au nanoparticles were 174, 231, 179, 143, 230, and 216 µg/mL against HEp-2, TU212, KB, UM-SCC-5, UM-SCC-11A and UM-SCC-11B cell lines, respectively. The viability of malignant cell lines reduced dose-dependently in the presence of Au nanoparticles. It appears that the anti-cancer effect of Au nanoparticles e to their antioxidant effects.     

Physical Properties of the Biodegradable Polymer Compositions Containing Natural Polyesters and their Synthetic Analogues

The thermal, mechanical and thermo-mechanical properties of polymer compositions, containing synthetic biodegradable polymers i.e. polylacide (PLA) and aliphatic-aromatic copolyester (BTA), natural biopolyester n-PHB and its synthetic atactic analog (a-PHB) were investigated. Thermal properties of the polymer compositions were studied by means of DSC . The compositions of various polymer weight ratio were tested. Compositions containing BTA and n-PHB create polyphase systems, what was confirmed by DSC. In this case the two Tg and two Tm values were observed. Polymer compositions containing PLA and BTA showed different behaviours. At the BTA content up to 30 weight % only one Tg and one Tm were indicated. At the increase of the BTA content to 50% weight and above, the two Tg, and two Tm were observed. Mixtures of BTA with n-PHB, PLA and with a-PHB show considerably greater values of the strain (ε) in comparison with initial polymers (n-PHB, PLA). It was found that in contrary to mixtures containing PLA, at the BTA content in the mixture with n-PHB above 50% of weights increases not only the strain, but also the stress at break (σ). Strong increase of the ε value in PLA/a-PHB mixtures with the content of a-PHB above 30% of weights were observed.     

Insight into the electronic,optical, thermodynamic,and thermoelectric properties of novel chalcogenides: An ab initio study

Ternary chalcogenides with direct band gaps are remarkable for being used in many optoelectronic applications. We investigated for structural, electronic, optical, and transport characteristics of new Ba₂CdCh₃ (Ch = S, Se, Te) semiconductors using the full-potential linearized augmented plane wave (FP-LAPW) approach. The band structures of these compounds confirm a direct type of band gap. The phonon dispersion plots along with the predicted negative formation energies suggest these compounds to be thermodynamically stable. Additionally, important optical characteristics were computed and thoroughly explained. The different ELF spectra were calculated in which strong peak correlate precisely with plasma resonance. Moreover, we also explored the thermodynamic characteristics of the ternary systems by employing the quasi-harmonic Debye model. These compounds were also suitable for thermoelectric applications based on the detailed discussion of the computed significant thermoelectric properties. In general, the advancement of various and promising semiconducting devices and their applications will be supported by the present study.     

Electrical resistivity, optical and magnetic properties of the layered oxyselenide SmCuOSe

The electrical and magnetic properties of the tetragonal phase SmCuOSe are reported as a function of the temperature. The optical properties were studied by means of diffuse reflectance spectrum in the UV-Vis range. The electrical resistivity measurements as well as diffuse reflectance spectrum show that SmCuOSe is a semiconductor with an optical band gap (E_g) of 2.6 eV. In this phase, Cu is at its monovalent oxidation state and, as such, it does not contribute to the total magnetic moment, whereas Sm is in its 3+ oxidation state, with a large VanVleck contribution due to the admixture of the fundamental state with higher energy levels.     

一种新型功能性显影促进剂的照相性能和抗老化性研究

研究了新型功能性显影促进剂照相性能与作用机理.照相性能试验结果表明:显影促进剂M能明显提高感光度而且具有良好的抗老化性能;染料吸收光谱的结果表明:它的使用不影响主成色剂成色染料的吸收光谱.     

The improvement of thermal stability and adhesion of silicone rubber composites modified by phenolic epoxy resin

The phenolic epoxy resin (F51) was siliconized by KH550 and the product was named as FKS. A hydroxyl-terminated polydimethylsiloxane (HTPDMS) which was modified with FKS was prepared. The siliconization reaction ensured a segment of siloxane on the side chain of F51. FT-IR and ¹H-NMR were employed to confirm the chemical structure of FKS. Morphology observations revealed that the enhancement of mechanical properties of the silicone rubber systems can be attributed to good compatibility between FKS and silicone rubber matrix. Thermogravimetric analysis showed that the residual yield at 800?°C of silicone rubber composites increased significantly when compared with that of neat HTPDMS. The mechanical properties demonstrated that tensile strength and elongation at break of silicone rubber system increased distinctly after modification, especially when 30 phr siliconized F51 were added to the silicone rubber. Shear strength was improved gradually with the addition of FKS. These above observations emphasize the vital effect of FKS on the behavior of modified HTPDMS.