Magnetic poly(glycidyl methacrylate) microspheres prepared by dispersion polymerization in the presence of electrostatically stabilized ferrofluids

Fine magnetite nanoparticles, both electrostatically stabilized and nonstabilized, were synthesized in situ by precipitation of Fe(II) and Fe(III) salts in alkaline medium. Magnetic poly(glycidyl methacrylate) (PGMA) microspheres with core‐shell structure, where Fe₃O₄ is the magnetic core and PGMA is the shell, were obtained by dispersion polymerization initiated with 2,2′‐azobisisobutyronitrile (AIBN), 4,4′‐azobis(4‐cyanovaleric acid) (ACVA), or ammonium persulfate (APS) in ethanol containing poly(vinylpyrrolidone) or ethylcellulose stabilizer in the presence of iron oxide ferrofluid. The average microsphere size ranged from 100 nm to 2 μm. The effects of the nature of ferrofluid, polymerization temperature, monomer, initiator, and stabilizer concentration on the PGMA particle size and polydispersity were studied. The particles contained 2–24 wt % of iron. AIBN produced larger microspheres than APS or ACVA. Polymers encapsulating electrostatically stabilized iron oxide particles contained lower amounts of oxirane groups compared with those obtained with untreated ferrofluid. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5827–5837, 2004     

Synthesis of poly(chitosan‐N‐isopropylacrylamide) complex particles with the method of soapless dispersion polymerization

Crosslinked poly(chitosan‐N‐isopropylacrylamide) [poly(NIPAAM‐chitosan)] complex particles were successfully synthesized with the method of soapless dispersion polymerization. The anionic initiator ammonium persulfate (APS) and the cationic initiator 2,2′‐azobis(2‐methylpropionamidine) dihydrochloride (AIBA) were used to initiate the copolymerization. The poly(NIPAAM‐chitosan) copolymer particles synthesized with APS as the initiator had a homogeneous morphology, whereas the copolymer particles synthesized with AIBA as the initiator showed a core–shell morphology. In addition, various variables such as the particle size, reaction rate, and ζ potential were taken into account. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2053–2063, 2003     

Anisotropic janus magnetic polymeric nanoparticles prepared via miniemulsion polymerization

Anisotropic Janus magnetic polymeric nanoparticles are prepared via the miniemulsion polymerization of styrene and acrylic acid monomers in the presence of oleic acid‐coated magnetic nanoparticles (MNPs). The controllable phase separation between the polymer matrix and the encapsulated MNPs is a key success factor to produce Janus morphology. The effects of MNPs, 2,2′‐azobis(2‐isobutyronitrile) and sodium dodecyl sulfate contents, on the morphology, chemical composition and colloidal stability of the prepared Janus hybrid particles are investigated. Besides the determination of polymerization conversion, zeta potential, size analysis, TGA, and TEM are applied for characterization of the anisotropic particles. The results show the stable spherical Janus particles containing MNPs (15 wt % magnetic content) located on one side of each polymer particle. The anisotropic submicron Janus magnetic polymeric particles (250 nm) can be easily separated by an external magnet. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4779–4785     

Glycoconjugated polymer. I. Synthesis and characterization of amphiphilic polystyrenes with glucose,maltose, and maltohexaose as hydrophilic segments

Glucosyl styrene ( 1a ), maltosyl styrene ( 1b ), and maltohexaosyl styrene ( 1c ) were prepared by the glycosylation of 4‐vinylbenzyl alcohol with the corresponding glycosyl trichloroacetimidates with boron trifluoride diethyl ether complex. The copolymerizations of 1a – 1c with styrene were carried out with 2,2′‐azobis(2‐methylpropionitrile) as an initiator in dry N,N‐dimethylformamide at 60 °C, and this was followed by deacetylation to produce amphiphilic polystyrenes with glucose ( 3a ), maltose ( 3b ), and maltohexaose ( 3c ) as hydrophilic segments. 3 showed various solubility characteristics that were dependent on the content of glucose residues, especially within a range of 20–50 wt %. The solubility characteristics of 3 , related to the copolymer composition, indicated that the hydrophilic property was remarkably improved with an increased number of glucose units, that is, in the order 3a < 3b ? 3c . The results described in this article provide useful information for the design of glycoconjugated architectures with desired amphiphilic properties. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4061–4067, 2001     

Mechanism of preparing monodispersed poly(acrylamide/methacrylic acid) microspheres in ethanol. II

We previously established a new mechanism of monodispersed poly(acrylamide/methacrylic acid) (PAAm/MAA) microspheres on the basis that the minimonomer droplets of AAm/MAA complexes were formed in ethanol at a polymerization temperature of 60 °C prior to the polymerization. Here, the effects of various factors such as the types and amount of initiators and crosslinking agents on the average diameters and morphologies of PAAm/MAA microspheres were qualitatively discussed on the basis of the new mechanism. The partition of reagents between the minimonomer droplets and the continuous medium was particularly emphasized in discussion because the formation of microspheres occurred in the minimonomer droplets. The new mechanism suggested that the size (number) and morphologies of the microspheres as well as the polymerization kinetics were consequently dependent on the properties and amount of initiators, crosslinking agents, and other monomers. It successfully explained the experimental phenomenon observed thus far in precipitation or dispersion polymerizations that the average diameter of microspheres is increased with the increase of the concentration of initiators, which contradicted the prediction of conventional mechanisms. As an example, the initiator dimethyl 2,2′‐azobisisobutyrate (DMAIB) was dominantly partitioned in ethanol. Thus, the diameter of the PAAm/MAA microspheres was decreased with the increase of the concentration of DMAIB because the formation of microspheres depended on the adsorption of free radicals to the minimonomer droplets. However, the initiator 4,4′‐azobis‐4‐cyanovaleric acid was dominantly partitioned within the minimonomer droplets, thereby increasing the diameter of the microspheres as the concentration of initiator was increased because of the lower efficiency of free radicals. Relative to the initiators, the crosslinking agents showed inverse effects on the diameter and morphology of the microspheres according to the different partitions. The monomer was transferred by the incorporation of minimonomer droplets with growing microspheres. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2833–2844, 2004     

Highly magnetic latexes from submicrometer oil in water ferrofluid emulsions

The synthesis of functionalized submicrometer magnetic latex particles is described as obtained from a preformed magnetic emulsion composed of organic ferrofluid droplets dispersed in water. Composite (polystyrene/γ‐Fe₂O₃) particles were prepared according to a two‐step procedure including the swelling of ferrofluid droplets with styrene and a crosslinking agent (divinyl benzene) followed by seeded emulsion polymerization with either an oil‐soluble [2,2′‐azobis(2‐isobutyronitrile)] or water‐soluble (potassium persulfate) initiator. Depending on the polymerization conditions, various particle morphologies were obtained, ranging from asymmetric structures, for which the polymer phase was separated from the inorganic magnetic phase, to regular core–shell morphologies showing a homogeneous encapsulation of the magnetic pigment by a crosslinked polymeric shell. The magnetic latexes were extensively characterized to determine their colloidal and magnetic properties. The desired core–shell structure was efficiently achieved with a given styrene/divinyl benzene ratio, potassium persulfate as the initiator, and an amphiphilic functional copolymer as the ferrofluid droplet stabilizer. Under these conditions, ferrofluid droplets were successfully turned into superparamagnetic polystyrene latex particles, about 200 nm in size, containing a large amount of iron oxide (60 wt %) and bearing carboxylic surface charges. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2642–2656, 2006     

Copper‐mediated initiators for continuous activator regeneration atom transfer radical polymerization of acrylonitrile

Initiators for continuous activator regeneration atom transfer radical polymerization technique was first accessed to acrylonitrile by using CuBr₂/2,2′‐bipyridine as the catalyst, ethyl 2‐bromoisobutyrate as the halogen initiator, and azobis(isobutyronitrile) as the free radical initiator. The key to success is ascribed to the facile achievement of the rapid equilibrium between active species and dormant species. Effects of ligand, catalyst concentration, free radical initiator concentration, and reaction temperature on the polymerization reaction and molecular weight (MW) as well as polydispersity index (PDI) were investigated in detail. The polymerization proceeded in a controlled/living fashion even though the concentration of copper catalyst decreased to 50 ppm, which is evident in pseudo first‐order kinetics of polymerization, linear increase of molecular weight, low PDI, and high chain‐end functionality of the generated polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and characterization of alt‐bipyridinylene‐phenylene copolymers containing ruthenium(II) complexes

Poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3a ), poly{bis(4,4′‐tert‐butyl‐2,2′‐bipyridine)–(2,2′‐bipyridine‐4,4′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3b ), and poly{bis(2,2′‐bipyridine)–(2,2′‐bipyridine‐5,5′‐diyl‐[1,4‐phenylene])–ruthenium(II)bishexafluorophosphate} ( 3c ) were synthesized by the Suzuki coupling reaction. The alternating structure of the copolymers was confirmed by ¹H and ¹³C NMR and elemental analysis. The polymers showed, by ultraviolet–visible, the π–π* absorption of the polymer backbone (320–380 nm) and at a lower energy attributed to the d–π* metal‐to‐ligand charge‐transfer absorption (450 nm for linear 3a and 480 nm for angular 3b ). The polymers were characterized by a monomodal molecular weight distribution. The degree of polymerization was approximately 8 for polymer 3b and 28 for polymer 3d . © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2911–2919, 2004     

A new chemical modification of liquid polybutadienes: Radical addition of aliphatic aldehydes onto pending vinyl groups

A new chemical modification of liquid polybutadiene by radical addition of model aldehydes (butanal and hexanal) onto pending vinyls of the polymer is described. The dibenzoyl peroxide/N,N‐dimethylaniline redox system was shown to initiate the hydroacylation more efficiently than the thermal decomposition of 2,2′‐azobis(2‐methylpropanenitrile) because it gives higher conversions (content of hydroacylated monomer units, as determined by NMR) without forming crosslinks or microgels. Typically, the former source of radicals gives the content of modified units as high as 13% related to all monomer units, while the latter only 2–6%. Repeated introduction of the redox system into the reaction mixture resulted in an increased content of the acyl groups. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3919–3925, 2008     

Nanoindentation studies of polyimide thin films with various internal linkages in the diamine component

Polyimide thin films were synthesized from 3,3′,4,4′‐biphenyltetracarboxylic acid dianhydride (BPDA) and four different diamines (p‐phenylene diamine, 4,4′‐oxydiphenylene diamine, 4,4′‐biphenylene diamine, and 4,4′‐sulfonyldiphenylene diamine). The nanoindentation behavior of the resulting polyimides, namely, poly(p‐phenylene biphenyltetracarboximide) (BPDA‐PDA), poly(4,4′‐biphenylene biphenyltetracarboximide) (BPDA‐BZ), poly(4,4′‐oxydiphenylene biphenyltetracarboximide) (BPDA‐ODA), and poly(4,4′‐sulfonyldiphenylene biphenyltetracarboximide) (BPDA‐DDS), were investigated. Also, the morphological properties were characterized with a prism coupler and wide‐angle X‐ray diffraction and were correlated to the nanoindentation studies. The nanoindentation behavior and hardness varied quite significantly, depending on the changes in the chemical and morphological structures. The hardness of the polyimide thin films increased in the following order: BPDA‐DDS < BPDA‐ODA < BPDA‐BZ < BPDA‐PDA. For all the polyimide thin films, except that of BPDA‐BZ, the hardness decreased with an increase in the load. The birefringence, a measure of the molecular in‐plane orientation, increased in the following order: BPDA‐DDS < BPDA‐ODA < BPDA‐PDA < BPDA‐BZ. The X‐ray diffraction studies revealed that the crystallinity of the polyimide thin films varied with the changes in the chemical structure. The studies showed that the indentation response with an applied load and the hardness by nanoindentation for the BPDA‐based polyimides were closely related to the morphological structure. The nanoindentation and birefringence results revealed that the mechanical properties of the polyimide thin films were dependent on the crystallinity, which arose because of the chain order along the chain axis and the molecular packing order. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 861–870, 2004     

High‐throughput experimentation in atom transfer radical polymerization: A general approach toward a directed design and understanding of optimal catalytic systems

High‐throughput experimentation (HTE) was successfully applied in atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) for the rapid screening and optimization of different reaction conditions. A library of 108 different reactions was designed for this purpose, which used four different initiators [ethyl 2‐bromoisobutyrate, methyl 2‐bromopropionate, (1‐bromoethyl)benzene, and p‐toluenesulfonyl chloride], five metal salts (CuBr, CuCl, CuSCN, FeBr₂, and FeCl₂), and nine ligands (2,2′‐bipyridine and its derivatives). The optimal reaction conditions for Cu(I) halide, CuSCN, and Fe(II) halide‐mediated ATRP systems with 2,2′‐bipyridine and its 4,4′‐dialkyl‐substituted derivatives as ligands were determined. Cu(I)‐mediated systems were better controlled than Fe(II)‐mediated ones under the examined conditions. A bipyridine‐type ligand with a critical length of the substituted alkyl group (i.e., 4,4′‐dihexyl 2,2′‐bipyridine) exhibited the best performance in Cu(I)‐mediated systems, and p‐toluenesulfonyl chloride and ethyl 2‐bromoisobutyrate could effectively initiate Cu(I)‐mediated ATRP of MMA, resulting in polymers with low polydispersities in most cases. Besides, Cu(I) halide‐mediated ATRP with 4,5′‐dimethyl 2,2′‐bipyridine as the ligand and p‐toluenesulfonyl chloride as the initiator proved to be better controlled than those with 4,4′‐dimethyl 2,2′‐bipyridine as the ligand, and polymers with much lower polydispersities were obtained in the former cases. This successful HTE example opens up a way to significantly accelerate the development of new catalytic systems for ATRP and to improve the understanding of structure–property relationships of the reaction systems. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1876–1885, 2004     

Reverse atom transfer radical polymerization of butyl methacrylate in a miniemulsion stabilized with a cationic surfactant

The miniemulsion reverse atom transfer radical polymerization of butyl methacrylate was carried out with cetyltrimethylammonium bromide (CTAB) as the sole surfactant. The polymerizations were initiated with 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane] dihydrochloride and mediated with copper(II) bromide/tris[2‐di(2‐ethylhexyl acrylate)aminoethyl]amine. The living character was demonstrated by the linear increase in the number‐average molecular weight with conversion and the decreasing polydispersity index with conversion. The polymerizations were conducted at 90 °C with 1 wt % CTAB with respect to the monomer and produced a coagulum‐free latex with a mean particle diameter of 155 nm. The resulting latexes exhibited good shelf‐life stability. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1628–1634, 2006     

Structure–property correlations of sulfonated polyimides. II. Effect of substituent groups on membrane properties

A series of sulfonated polyimides with increasing alkyl substituents in the o‐position to diamine were synthesized from 4,4′‐methylene dianiline, 4,4′‐diamine‐3,3′‐dimethyl‐diphenylmethane, and 4,4′‐diamine‐3,5,3′,5′‐tetraethyl‐diphenylmethane using 1,4,5,8‐naphthalenetetracarboxylic dianhydride and perylenetetracarboxylic dianhydride by chemical imidization method. 4,4′‐Diaminobiphenyl 2,2′‐disulfonic acid was used as sulfonated diamine. The variation in the membrane properties with increase in substitution was analyzed. Solubility increased with substitution whereas the thermal stability decreased with increase in substitution. Ion exchange capacity and water uptake reduced with increase in substitution because of the low sulfonic acid content at a particular weight due to the increased molecular weight of the repeating unit. The conductivity of the substituted diamines was higher than the unsubstituted diamines at higher temperature regardless of low ion exchange capacity and water uptake. The increase in conductivity with increase in temperature was more rapid in polyimides than in Nafion®115. Hydrolytic stability of the polyimides with substitution is more than the unsubstituted diamines. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3621–3630, 2004     

Morphology and temperature responsiveness–swelling relationship of poly(N‐isopropylamide–chitosan) copolymers and their application to drug release

Poly [N‐isopropylacrylamide (NIPAAm)–chitosan] crosslinked copolymer particles were synthesized by soapless emulsion copolymerization of NIPAAm and chitosan. An anionic initiator [ammonium persulfate (APS)] and a cationic initiator [2,2′‐azobis(2‐methylpropionamidine)dihydrochloride (AIBA)] were used to initiate the reaction of copolymerization. The chitosan–NIPAAm copolymer synthesized by using APS as the initiator showed a homogeneous morphology and exhibited the characteristic of a lower critical solution temperature (LCST). The copolymer synthesized by using AIBA as an initiator showed a core–shell morphology, and the characteristic of LCST was insignificant. The LCST of the chitosan–NIPAAm copolymer depended on the morphology of the copolymer particles. In addition, the chitosan–NIPAAm copolymer particles were processed to form copolymer disks. Then, the effect of various variables such as the chitosan/NIPAAm weight ratio, the concentration of crosslinking agent, and the pH values on the swelling ratio of chitosan–NIPAAm copolymer disks were investigated. Furthermore, caffeine was used as the model drug to study the characteristics of drug loading of the chitosan–NIPAAm copolymer disks. Variables such as the chitosan/NIPAAm weight ratio and the concentration of the crosslinking agent significantly influenced the behavior of caffeine loading. Two factors (pore size and swelling ratio) affected the behavior of caffeine release from the chitosan–NIPAAm copolymer disks. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3029–3037, 2004     

Synthesis of fluorinated oligomers for supercritical carbon dioxide applications

Syntheses of various fluorine‐based surfactants, namely fluorinated‐segment‐containing block co‐oligomers, were achieved by the radical polymerization of mainly acrylate‐based monomers. These types of surfactants serve as stabilizers for supercritical carbon dioxide (scCO₂) media based applications, for which the effective solubilization of materials in the supercritical phase is generally not possible because of solubility problems faced when CO₂ is involved. Initially, a difunctional fluorinated initiator was synthesized in two steps. First, 4,4′‐azobis‐4‐cyanovaleric acid was chlorinated with SOCl₂, and then the product, 4,4′‐azobis‐4‐cyanovaleryl chloride, was reacted with a fluorinated alcohol to obtain the initiator for the polymerization reactions. The synthesized triblock co‐oligomers consisted of fluorinated side blocks and a hydrocarbon intermediate block. Efficient solubilization of the materials in scCO₂ was observed. It was experimentally shown that the solubility efficiency was affected by specific interactions between CO₂ and the oligomers, and these were determined by the nature and size of the inner block and by the chain length of the fluorinated side blocks in comparison with the inner block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5312–5322, 2005     

Reaction‐induced phase separation in epoxy/polysulfone/poly(ether imide) systems. I. Phase diagrams

Epoxy–aromatic diamine formulations are simultaneously modified with two immiscible thermoplastics (TPs), poly(ether imide) (PEI) and polysulfone (PSF). The epoxy monomer is based on diglycidyl ether of bisphenol A and the aromatic diamines (ADs) are either 4,4′‐diaminodiphenylsulfone or 4,4′‐methylenebis(3‐chloro 2,6‐diethylaniline). The influence of the TPs on the epoxy–amine kinetics is investigated. It is found that PSF can act as a catalyst. The presence of the TP provokes an increase of the gel times. Cloud‐point curves (temperature vs. composition) are shown for epoxy/PSF/PEI and epoxy/PSF/PEI/AD initial mixtures. Phase separation conversions are reported for the reactive mixtures with various TP contents and PSF/PEI proportions. On the basis of phase separation and gelation curves, conversion–composition phase diagrams at constant temperature are generated for both systems. These diagrams can be used to design particular cure cycles to generate different morphologies during the phase separation process, which is discussed in the second part of this series. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3953–3963, 2004     

Synthesis and characterization of new alternating,amphiphilic, comblike copolymers of poly(ethylene oxide) macromonomer and N‐phenylmaleimide

A surface‐active p‐vinyl benzyloxy‐ω‐hydroxy‐poly(ethylene oxide) macromonomer containing 22 pendant structural units of ethylene oxide (St–PEO₂₂) was synthesized with an initiation method. Because of its solubility in a large variety of solvents, the free‐radical copolymerization with electron‐acceptor N‐phenylmaleimide (NPMI) was performed at 60 °C in benzene and tetrahydrofuran (THF) as isotropic media and in a water–THF mixture or water as a heterogeneous medium. Oil‐soluble 2,2′‐azobisisobutyronitrile and water‐soluble 4,4′‐azobis(4‐cyanovaleric acid) were used as the initiators at fixed concentrations. Two different St–PEO₂₂/NPMI comonomer ratios (1/1 and 3/7) at a fixed total comonomer concentration in the polymerization system were used. The structures, compositions, and microstructure peculiarities of the obtained alternating, amphiphilic, comblike copolymers were determined by NMR analysis. For the copolymers synthesized in hydrophilic media, differential scanning calorimetry showed, near the endothermic peak attributed to the melting of the poly(ethylene oxide) side chains, the presence of a second peak due to the partially ordered phase that could exist between the crystalline state and the isotropic melt. Also, the thermal stability of the obtained copolymers was studied with thermogravimetric analysis. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 479–492, 2005     

Reaction‐induced phase separation in epoxy/polysulfone/poly(ether imide) systems. II. Generated morphologies

Epoxy–aromatic diamine formulations are simultaneously modified with two immiscible thermoplastics (TPs), poly(ether imide) (PEI) and polysulfone (PSF), in concentrations ranging from 5 to 15 wt %. The epoxy monomer is based on diglycidyl ether of bisphenol A and the aromatic diamines (ADs) are either 4,4′‐diaminodiphenylsulfone (DDS) or 4,4′‐methylenebis(3‐chloro 2,6‐diethylaniline) (MCDEA). Using phase diagrams developed in Part I of this series, thermal cycles are selected to generate different morphologies. It is found that, whatever the AD employed, a particulate morphology is obtained when curing blends that are initially homogeneous. In the case of DDS‐cured blends, a unimodal particle size distribution of PSF and PEI dispersed in a continuous epoxy‐rich phase is observed. By contrast, the MCDEA‐cured blends show a bimodal particle size distribution for all PSF/PEI relations that are analyzed. A completely different morphology, characterized by a distribution of irregular TP‐rich domains dispersed in an epoxy‐rich phase (double phase morphology), is obtained when curing blends that are initially immiscible. An X‐ray analysis of the different phases makes it possible to determine their qualitative composition. The dynamic mechanical behavior of fully cured blends is also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3964–3975, 2004     

Hydrolysis of aromatic polyurethane in water under high pressure of CO2

We have demonstrated a hydrolysis reaction of polyurethane (PU) under high pressure of carbon dioxide (CO₂) in water. We employed the PU sample, poly(methylene bis‐(1,4‐phenylene)hexamethylene dicarbamate), denoted as M‐PU, which was synthesized from 4,4′‐diphenyl methane diisocyanate and 1,4‐butane diol (BD). The optimum hydrolysis reaction condition was 190 °C under CO₂ pressures over 4.1 MPa in water medium, and 93% hydrolysis of M‐PU was achieved. After the reaction, the water‐soluble parts were obtained, and isolated by column chromatography. The isolated products were 4,4′‐methylenedianiline (MDA) and 1,4‐butane diol (BD), which were components of repeating unit of M‐PU. In addition, the hydrolysis reaction gave no byproduct. This hydrolysis under high pressure of CO₂ with water is a reaction by which M‐PU is selectively hydrolyzed into MDA and BD by cleaving urethane linkage. Moreover, the resulting hydrolyzed products were easily obtained by evaporation of aqueous layer after the reaction, indicating an efficient chemical recycling of PU was achieved. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2004–2010     

Effect of reaction parameters on the dispersion polymerization of 1‐vinyl‐2‐pyrrolidone

Nonporous hydrogel microspheres 0.1–1.3 μm in diameter were prepared by the dispersion copolymerization of 1‐vinyl‐2‐pyrrolidone and ethylene dimethacrylate as a crosslinking agent. The crosslinking was evidenced by solid state ¹³C NMR and elemental analysis. The effect of various parameters including selection of solvent (cyclohexane, butyl acetate), initiator (4,4′‐azobis(4‐cyanopentanoic acid), 2,2′‐azobisisobutyronitrile, dibenzoyl peroxide) and stabilizer on the properties of resulting microspheres has been studied. Dynamic light scattering and photographic examination were used for determination of the diameter and polydispersity of microspheres. Increasing concentration of steric stabilizer in the initial polymerization mixture decreased the particle size. The particle size depended on the molecular weight of polystyrene‐block‐hydrogenated polyisoprene stabilizer, but not on the number of PS and polybutadiene blocks in the styrene–butadiene block copolymer stabilizers. Dibenzoyl peroxide used as an initiator resulted in agglomeration of particles. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 653–663, 2000