Design and Synthesis of Novel Organic Luminescent Materials Based on Pyrazole Derivative

Five new materials based on pyrazole derivatives have been synthesized and characterized as organic light‐emitting devices. This report presents a novel approach to combine pyrazole with aromatic hydrocarbons via methylene. The formed molecules exhibited twisted structures, which resulted in high glass transition temperatures (T_g), which ranged from 83.0 to 101.1°C. They also had high optical band gaps (E_g); most of their optical band gaps are determined by the absorption edge technique as 3.43 to 3.66 eV, evaluated photophysical properties of these synthesized novel chromophores, the optical properties such as maximum absorption and emission wavelengths (λ; nm), molar extinction coefficients (ε; cm^?1·M^?1), Stokes' shifts (Δλ_ST; nm), and quantum yields (φ_F). These compounds exhibited intense absorption bonds between 230 and 350 nm, and the effect of solvent polarity on emission of these pyrazole derivatives was also studied. In addition, they showed blue fluorescence in different solvents and bathochromic shift with the increase in the solvent polarity.     

Novel fluorescent 2‐(2‐aminofluorophenyl)benzoxazoles: Syntheses and photophysical properties

2‐(2‐Amino‐3,4,5,6‐tetrafluorophenyl)benzoxazole ( 2 ) absorbs in long wavelength band (λ_abs^max = 346 nm in methanol) and in the normal wavelength band (λ_abs^max = 285.5 nm), and emits blue fluorescence. The emission intensity is highly affected by the solvent polarity and is large in a polar solvent such as methanol. 2‐(2‐Pentafluorobenzamido‐3,4,5,6‐ tetrafluorophenyl)benzoxazole ( 5 ) emits green fluorescence along with the short wavelength emission around 380 nm and their relative intensity depends on the solvent polarity. Green fluorescence is enhanced in nonpolar solvents such as chloroform and toluene, resulting in the considerably large Stokes shift.     

Preparation and optical and electrochemical properties of octaethylphthalocyanines fused with several tetrathiafulvalene units

3,6‐Diethylphthalonitrile ( 3 ) with a tetrathiafulvalene (TTF) unit at 4,5‐positions was prepared from 4,5‐xylylenedithio‐3,6‐diethylphthalonitrile ( 1a ) via elimination of the xylylene group, connection of a carbonyl group to benzenedithiolate generated, and condensation of 4,5‐bis(methylthio)‐1,3‐dithiole‐2‐thione with benzo‐1,3‐dithiole‐2‐one ( 2‐O ) produced. A 1:1 mixture of phthalonitrile ( 3 ) and 4,5‐bis(benzylthio)‐3,6‐diethylphthalonitrile ( 1b ) was treated with lithium in n‐hexanol at 120°C to produce hexakis (benzylthio)mono(tetrathiafulvaleno)phthalocyanine ( 5 ), tetrakis(benzylthio)bis(tetrathiafulvaleno)phthalocyanine ( 6 ), and bis(benzylthio)tris(tetrathiafulvaleno)phthalocyanine ( 7 ). The structures of 5 , 6 , and 7 were determined by ¹H NMR, FAB MS, MALDI‐TOF MS (matrix assisted laser desorption ionization time‐of‐flight mass spectrometry), and UV‐‐vis spectroscopy. Compound 6 is a mixture of trans and cis isomers ( 6‐ trans and 6‐ cis ). The UV‐‐vis spectrum of 5 measured in chloroform changed by addition of trifluoroacetic acid (TFA). The Q band absorption at λ_max = 755 nm (chloroform) decreased in intensity and resulted in a new absorption at λ_max = 740 nm (chloroform/TFA). The electrochemical properties of 5 , 6 , and 7 were determined by cyclic voltammetry using Ag/AgNO₃ as a reference electrode. © 2011 Wiley Periodicals, Inc. Heteroatom Chem 22:605–611, 2011; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20694     

A 2D Metal‐Organic Framework Based on 9‐(Pyridin‐4‐yl)‐9H‐carbazole‐3,6‐dicarboxylic Acid: Synthesis,Structure and Properties

A metal‐organic framework (MOF ) formulated as [Cd₂(μ₃‐L)₂(DMF )₄]•H₂O ( CdL ) [H₂L =9‐(pyridin‐4‐yl)‐ 9H ‐carbazole‐3,6‐dicarboxylic acid, DMF =N ,N ‐dimethylformamide] was synthesized under solvothermal condition. Crystal structural analysis reveals that CdL features the layered 2D framework with L^{2 −} ligands as 3‐connected nodes. The compound CdL emits blue‐violet light with the narrow emission peak and the emission maximum at 414 nm upon excitation at the maximum excitation wavelength of 340 nm. The compound CdL has a similar emission spectrum curve to the free H₂L ligand that indicates the emission of compound CdL should be originated from the coordinated L^{2 −} ligands.     

Synthesis and self-assembly of side-chain azocomplex for preparation of solid and hollow nanosphere

A new strategy based on ionic self-assembly technology was provided for design of solid and hollow nanospheres. Solid azocomplex nanospheres were constructed by ionic self-assembly of statistical ionomer and metanil yellow. The structure of azocomplex and self-assembly behaviors were examined by a variety of techniques including ¹H-NMR, ¹³C-NMR, DSC, FTIR, UV–vis, TEM, and elemental analysis. The azocomplex was subjected to solvent-induced self-assembly to construct a variety of morphologies. Solid polymeric nanospheres with the sizes of 50~100?nm in diameter were formed in aqueous solution. High-resolution transmission electron microscopes and X-ray energy dispersion spectrometer were used to study the morphology and composition of the solid nanospheres. The spherical and ordered structure was destroyed in DMF, and converted into membrane structure. Polymeric hollow nanospheres with azobenzene chromophores were formed in DMF/H₂O mixed solvent, with 62.5% H₂O in mass. The size of these hollow nanospheres was 50~120?nm in diameter.     

New microstructured chromium doped poly(p‐toluidine) as a new acid–base indicator and precursor for chromic oxide nanostructured

New chromium doped poly(p‐toluidine) (Cr‐PPT) was synthesized via chemical oxidative polymerization of p‐toluidine with potassium dichromate as an initiator in acidic aqueous medium. The spectrophotometric behavior of Cr‐PPT in acetone and chloroform as different solvents was investigated. Cr‐PPT exhibits bathochromically red shift at 46‐nm value with the increasing of solvent polarity. The intermolecular charge transfer band peak for Cr‐PPT shifted from 422 nm in low‐polar solvent (chloroform) to high‐polar solvent (acetone) to 468 nm. Optical absorption measurements are used to obtain the energy gap of prepared Cr‐PPT. Cr‐PPT has an optical band gap (E_g = 1.90 to 2.05 eV) that is located in the semiconductor range. Pink color was observed using Cr‐PPT solution in acidic media while it changes sharply to yellow in basic medium. Based on intermolecular charge transfer, the Cr‐PPT was used as acid–base indicator. Cr‐PPT and phenolphthalein (phph) indicator were used for determination of normality of HCl using standard 0.1 N NaOH, the two indicators gave equal end point values. Using Cr‐PPT as a new molecular precursor for the production chromium oxide in nanoscale by thermal decomposition route was studied, and the average size of synthesized Cr₂O₃ was found in the range of 54–61 nm. Copyright © 2017 John Wiley & Sons, Ltd.     

Effect of Medium Acidity and Photostability of 3‐(4‐Dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP): A New Green Emitting Laser Dye

On the line of a previous work on the spectral properties of some of heteroaryl chalcone, the effect of medium acidity and photoreactivity of 3‐(4‐dimethylamino‐phenyl)‐1‐(2,5‐dimethyl‐thiophen‐3‐yl)‐propenone (DDTP) has been investigated in dimethylformamide and in chloromethane solvents such as methylenechloride, chloroform and carbon tetrachloride. The dye solution (ca. 5×10⁻⁴ mol·L⁻¹ in DMF) gives a good laser emission in the range 470–560 nm with emission maximum at 515 nm upon pumping by nitrogen laser (λ_ex=337.1 nm). The laser parameters such as gain coefficient (α), emission cross section (δ_e) and half life energy (E_1/2) at maximum laser emission are also determined.     

Preparation, Crystal Structure and Enthalpy Change of Formation of the Reaction in Liquid Phase of a New Three- Dimensional Mixed-Ligand Holmium（Ⅲ）Coordination Polymer Based on Strong π-π Stacking Interactions

A new three-dimensional coordination polymer, [Ho（5-nip）（phen）（NO3）（DMF）] （5-nip=5-nitroisophthalic acid and phen=1,10-phenanthroline）, was prepared and characterized by single crystal X-ray diffraction, elemental analysis, IR spectrum and DTG-DSC techniques. The results show that the title complex crystallizes in space group P2/m with a= 1.0906（3） nm, b =1.2804 （3） nm, c= 1.6987（4） nm, β=91.400（5）°, Z=4, Dc= 1.931 Mg/m^3, F（000）= 1352. Each Ho（Ⅲ） ion is nine-coordinated by one chelating bidentate and two monodentate bridging carboxylate groups, one chelating bidentate NO3 anion, one DMF molecule and one 1,10-phenanthroline molecule. The complex is constructed with one-dimensional ribbons featuring dinuclear units and the one-dimensional ribbons are further assembled into two-dimensional networks by strong π-π stacking interactions with the distance of 0.327 nm, then the networks are arranged into three-dimensional structure according to ABAB fashion. The complex exhibits high stability up to 600 ℃. Its enthalpy change of formation of the reaction in liquid-phase in solvent DMF was measured using an RD496-Ⅲ type microcalorimeter with a value of （-11.016±0.184） kJ·mol^-1.     

A Novel Dual Channel Fluorescent Probe for Ca2+ and Zn2+ Based on a Coumarin Schiff Base

A novel coumarin Schiff base fluorescent probe ethyl 7‐hydroxycoumarin‐3‐carboxylate‐8‐formaldehyde benzoyl hydrazone ( EBH ) has been designed and synthesized which shows solvent dependent dual sensing, viz., recognition of Ca²⁺ in DMF‐H₂O (9∶1, V /V ) solution based on C = N isomerization, photoinduced electron transfer (PET ) inhibition and chelation‐enhanced fluorescence (CHEF ) mechanism as well as detection of Zn²⁺ in H₂O‐CH₃OH (9∶1, V /V ) solution by excited‐state intramolecular proton transfer (ESIPT ) and CHEF processes. The structure of the probe EBH has been confirmed by single‐crystal X‐ray diffraction analysis. Meanwhile, the probe was also used to image intracellular Zn²⁺ ions in MCF ‐7 cells with a good performance.     

A new lanthanum coordination polymer built from a semi‐rigid tripodal carboxylic acid ligand: synthesis,crystal structure and properties

By employing the semi‐rigid multidentate carboxylic acid ligand 4,4′,4′′‐{[(2,4,6‐trimethylbenzene‐1,3,5‐triyl)tris(methylene)]tris(oxy)}tribenzoic acid (denoted H₃L), a new lanthanum coordination polymer, namely poly[[bis(dimethylformamide)(μ₆‐4,4′,4′′‐{[(2,4,6‐trimethylbenzene‐1,3,5‐triyl)tris(methylene)]tris(oxy)}tribenzoato)lanthanum(III)] dimethylformamide tetrasolvate 0.25‐hydrate], {[La(C₃₃H₂₇O₉)(C₃H₇NO)₂]·4C₃H₇NO·0.25H₂O}_n or {[La(L)(DMF)₂]·4(DMF)·0.25(H₂O)}_n (DMF is dimethylformamide) ( 1 ), was prepared and characterized by single‐crystal X‐ray diffraction, elemental analysis, thermogravimetric analysis, IR spectroscopy and photoluminescence studies. The asymmetric unit contains one La^III cation, one anionic L^3? ligand, two coordinated DMF molecules, four free DMF molecules and one‐quarter of a free water molecule. Compound 1 possesses (3,6)‐connected two‐dimensional kgd topology sheets consisting of secondary building units of La₂ clusters and L^3? ligands, which further stack into three‐dimensional supramolecular networks through π–π interactions. Compound 1 exhibits a photoluminescence emission at room temperature, with a peak at 410 nm, owing to a ligand‐centred excited state.     

Encapsulation of LnIII Ions/Dyes within a Microporous Anionic MOF by Post‐synthetic Ionic Exchange Serving as a LnIII Ion Probe and Two‐Color Luminescent Sensors

A new anionic framework {[Me₂NH₂]_0.125[In_0.125(H₂L)_0.25] ? xDMF}_n ( 1 ) with one‐dimensional (1D) channels along the c axis of about 13.06×13.06 Ų, was solvothermally synthesized and well characterized. Post‐synthetic cation exchange of 1 with Eu³⁺, Tb³⁺, Dy³⁺, Sm³⁺ afforded lanthanide(III)‐loaded materials, Ln³⁺@ 1 , with different luminescent behavior, indicating that compound 1 could be used as a potential luminescent probe toward different lanthanide(III) ions. Additionally, compound 1 exhibits selective adsorption ability toward cationic dyes. Moreover, the RhB@ 1 realized the probing of different organic solvent molecules by tuning the energy transfer efficiency between two different emissions, especially for sensing DMF. This work highlights the practical application of luminescent guest@MOFs as sensors, and it paves the way toward other one/multi‐color luminescent host–guest systems by rational selection of MOF hosts and guest chromophores with suitable emissive colors and energy levels.     

Synthesis,properties, and field effect transistor characteristics of new thiophene‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐thiophene‐based conjugated polymers

Four new conjugated copolymers based on the moiety of bis(4‐hexylthiophen‐2‐yl)‐6,7‐diheptyl‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline (BTHTQ) were synthesized and characterized, including poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline) (PBTHTQ), poly‐(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo‐[3,4‐g]quinoxaline‐alt‐2,5‐thiophene) (PTTHTQ), poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl) [1,2,5]‐thiadiazolo‐[3,4‐g]quinoxaline‐alt‐9,9‐dioctyl‐2,7‐fluore‐ne) (PFBTHTQ), and poly(6,7‐diheptyl‐4,9‐bis(4‐hexylthiophen‐2‐yl)‐[1,2,5]thiadiazolo[3,4‐g]quinoxaline‐alt‐1,4‐bis(decyloxy)phenylene) (PPBTHTQ). The λ_max of PBTHTQ, PTTHTQ, PFBTHTQ, and PPBTHTP thin films was shown at 780, 876, 734, and 710 nm, respectively, with the corresponding optical band gaps (E) of 1.31, 1.05, 1.40, and 1.43 eV. The relatively small band gaps of the synthesized polymers suggested the significance of intramolecular charge transfer between the donor and TQ moiety. The estimated hole mobilities of PBTHTQ, PTTHTQ, and PFBTHTQ‐based field effect transistor devices using CHCl₃ solvent were 8.5 × 10^?5, 8.5 × 10^?4, and 2.8 × 10^?5 cm² V^?1 s^?1, respectively, but significantly enhanced to 1.6 × 10^?4, 3.8 × 10^?3, and 1.5 × 10^?4 cm² V^?1 s^?1 using high boiling point solvent of chlorobenzene (CB). The higher hole mobility of PTTHTQ than the other two copolymers was attributed from its smaller band gap or ordered morphology [wormlike (chloroform) or needle‐like (CB)]. The characteristics of small band gap and high mobility suggest the potential applications of the BTHTQ‐based conjugated copolymers in electronic and optoelectronic devices. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6305–6316, 2008     

Bending crystals. Solid state photomechanical properties of transition metal complexes containing semiquinonate ligands

The properties of transition metal complexes containing catecholate and radical semiquinonate ligands have often been found to be unusual and unexpected. Crystals of Rh(CO)₂(3,6-DBSQ), containing the 3,6-di-tert-butyl-1,2-semiquinonate ligand, form as long thin needles that are observed to bend reversibly upon irradiation with NIR light. Crystallographic characterization reveals a stacked solid state lattice with planar molecules aligned with metal atoms atop one another. Electronic spectra recorded in the solid state and in solution show an intense band at 1600 nm that maps the energy dependence of crystal bend angle. The transition is a property of the stacked assembly, rather than of an individual complex molecule, and appears associated with an MLCT process that transfers charge from an antibonding band formed by interacting Rhd _z ² orbitals to the vacant quinone π* orbital. Related observations have been made on the [Co(μ-pyz)(3,6-DBSQ)(3,6-DBCat)]_npolymer. Photomechanical properties appear associated with electronic transitions that lead to a physical change in axial length of a linear polymer, coupled with a soft solid state lattice that permits axial contraction/expansion without crystal fracture.     

Cellulose/chitosan hybrid nanofibers from electrospinning of their ester derivatives

A facile approach has been established to generate cellulose/chitosan hybrid nanofibers with full range of compositions by electrospinning of their ester derivatives, cellulose acetate (CA) and dibutyryl chitin (DBC), followed by alkaline hydrolysis to cellulose (Cell) and chitosan (CS). DBC was synthesized by acid-catalyzed acylation of chitin (CHI) with butyric anhydride and the newly formed butyl groups on C3 and C6 were confirmed by FT-IR and ¹HNMR. DBC had robust solubility in acetone, DMAc, DMF, ethanol, and acetic acid, all except ethanol were also solvents for CA, allowing mixing of these ester derivatives. Fiber formation by electrospinning of either DBC or CA alone and together in these common solvents and their mixtures were studied. The 1/1 acetone/acetic acid was found to be the optimal solvent system to generate fibers from either DBC or CA as well as their mixtures at all CA/DBC ratios, resulting in hybrid fibers with diameters ranging from 30 to 350 nm. DBC and CA were well mixed and showed no phase separate in the hybrid fibers. Alkaline hydrolysis (NaOH) of the equal mass CA/DBC nanofibers regenerated Cell and CHI readily via O-deacylation, then proceeded to further deacetylate CHI to CS via N-deacetylation at higher alkaline concentrations and/or temperatures. Under conditions studied, hydrolysis with 5N NaOH at 100 °C for 3 h was optimal to regenerate cellulose/chitosan hybrid nanofibers.     

New photoluminescent conjugated polymers with 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP) and 1,4‐phenylene units in the main chain

A series of π‐conjugated polymers and copolymers containing 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (also known as 2,5‐dihydro‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐1,4‐dione) (DPP) and 1,4‐phenylene units in the main chain is described. The polymers are synthesised using the palladium‐catalysed aryl‐aryl coupling reaction (Suzuki coupling) of 2,5‐dihexylbenzene‐1,4‐diboronic acid with 1,4‐dioxo‐2,5‐dihexyl‐3,6‐di(4‐bromophenyl)pyrrolo[3,4‐c]pyrrole and 1,4‐dibromo‐2,5‐dihexylbenzene in different molar ratios. Soluble hairy rod‐type polymers with molecular weights up to 21 000 are obtained. Polymer solutions in common organic solvents such as chloroform or xylene are of orange colour (λ_max = 488 nm) and show strong photoluminescence (λ_max = 544 nm). The photochemical stability is found to be higher than for corresponding saturated polymers containing isolated DPP units in the main chain. Good solubility and processability into thin films render the compounds suitable for electronic applications.     

Exciton <Emphasis Type="Italic">Cotton</Emphasis> Effects of Benzoates in the <Superscript>1</Superscript>B Transition Region. Demonstration and Applications

Summary. The benzoate ¹B region exciton Cotton effects, hitherto unexplored, were analyzed for their use in stereochemical assignments in both acyclic (conformationally flexible) and cyclic molecules. It was found that a strong, allowed ¹B_a transition, polarized longitudinally, dominates the ¹B region (185–210nm) both in the UV and the CD spectra. The exciton Cotton effects due to this transition have the same sign (but differing magnitude) as those due to the ¹L_a (CT) band. The other component of the nearly degenerate ¹B system, i.e. ¹B_b transition, polarized orthogonally to the ¹B_a transition, gives a Cotton effect in the case of di- and poly(4-chlorobenzoate) chromophoric system, the sign of which is sensitive to the configuration of di- or polyol. In rigid 5-steroid skeleton ¹B_b transition couplings appear responsible for strong exciton Cotton effects due to nearly parallelly oriented benzoate chromophores. Whereas ¹B_a transition excitation energy appears insensitive to the nature of a substituent in 4-position of the benzoate chromophore, substitution with a donor group (methoxy, dimethylamino) brings about a red shift of the ¹B_b band, although less pronounced than the red shift of the ¹L_a (CT) band.     

Exciton Cotton Effects of Benzoates in the 1B Transition Region. Demonstration and Applications

The benzoate ¹B region exciton Cotton effects, hitherto unexplored, were analyzed for their use in stereochemical assignments in both acyclic (conformationally flexible) and cyclic molecules. It was found that a strong, allowed ¹B_a transition, polarized longitudinally, dominates the ¹B region (185–210nm) both in the UV and the CD spectra. The exciton Cotton effects due to this transition have the same sign (but differing magnitude) as those due to the ¹L_a (CT) band. The other component of the nearly degenerate ¹B system, i.e. ¹B_b transition, polarized orthogonally to the ¹B_a transition, gives a Cotton effect in the case of di- and poly(4-chlorobenzoate) chromophoric system, the sign of which is sensitive to the configuration of di- or polyol. In rigid 5-steroid skeleton ¹B_b transition couplings appear responsible for strong exciton Cotton effects due to nearly parallelly oriented benzoate chromophores. Whereas ¹B_a transition excitation energy appears insensitive to the nature of a substituent in 4-position of the benzoate chromophore, substitution with a donor group (methoxy, dimethylamino) brings about a red shift of the ¹B_b band, although less pronounced than the red shift of the ¹L_a (CT) band.     

Multisensing Emissive Pyrimidine

Fluorescent nucleoside analogs, commonly used to explore nucleic acid dynamics, recognition and damage, frequently respond to a single environmental parameter. Herein we address the development of chromophores that can simultaneously probe more than one environmental factor while having each associated with a unique spectroscopic signature. We demonstrate that an isomorphic emissive pyridine‐modified 2‐deoxy‐uridine 1 , containing multiple sensory elements, responds to changes in acidity, viscosity, and polarity. Protonation of the pyridine moiety (pK_a 4.4) leads to enhanced emission (λ_em=388 nm) and red‐shifted absorption spectra (λ_abs=319 nm), suggesting the formation of an intramolecular hydrogen bond with the neighboring pyrimidine carbonyl. This “locked” conformation can also be mimicked by increasing solvent viscosity, resulting in a stark enhancement of emission quantum yield. Finally, increasing solvent polarity substantially impacts the chromophore’s Stokes shift [from 5.8×10³ cm^?1 at E_T(30)=36.4 kcal mol^?1 to 9.3 ×10³ cm^?1 at E_T(30)=63.1 kcal mol^?1]. The opposite effect is seen for the impact of solvent polarity of the protonated form. The characteristic photophysical signature induced by each parameter facilitates the exploration of these environmental factors both individually and simultaneously.     

MULTIPLE CHROMOPHORE SPECIES IN PHYTOCHROME*,†,‡

Abstract— Buffered aqueous solutions of pure phytochrome, when irradiated at 730 nm, had a main absorption band at about 660 nm and a shoulder or secondary band at 580–600 nm. When irradiated at 660 nm, these absorption bands bleached and a pair of bands at 670 and 725–730 nm appeared. When 660 nm irradiated samples were placed in the dark the 730 nm absorption slowly bleached and the 670 nm absorption band shifted to 660 nm. The kinetics of the bleaching indicated that two populations of P_FR existed initially. These two populations decayed by first order kinetics with k's of 4.8 × 10^-4 sec^-1 and 3.1 × 10^--⁵ sec^-1at 25°. While the bleaching of P_FR was occumng, the appearance of the 660 nm and 580–600 nm absorption bands characteristic of P_R took place. The kinetics of the increase in the 580 and 660 nm absorption bands indicated that it was arising from two populations of reactants by two first order reactions with k's of 6.4 × 10^-4 sec^-1 and 3.1 × 10^-5sec^-1 at 25°. When the sodium chloride concentration of the solvent was changed the proportions of the kinetically different populations were altered. In some conditions, especially in the presence of air. reversible but non-reciprocal changes in the four absorption bands were observed. These effects were evident after the lapse of many hours in the dark. When native phytochrome was treated with sodium dodecyl sulfate all absorption bands but the 580–600 nm absorption band were bleached and photoreversibility was lost. When native phytochrome was treated with glutaraldehyde, the 730 nm absorption band was bleached but photoreversibility was retained. It was concluded that at least four species of chromophore exist in phytochrome with absorption maxima at 580, 660 , 670 and 730 nm. Each chromophore is capable of being bleached by appropriate irradiation or in the dark by chemical reactions rather than photochemical reactions. The reactions are probably coupled redox reactions between the 580–660 nm pair and the 670–730 pair of chromophores. Discrepancies observed in the reciprocity of the absorption changes in these paired bands are probably due to various degrees of uncoupling and secondarily to the redox potential of the solvent when such uncoupling occurs.     

Circular and Linear Dichroism of Aggregates of Chlorophyll a and Chlorophyll b in 3-Methylpentane and Paraffin Oil

A circular (CD) and linear dichroism (LD) study of the water adducts of the green plant chlorophylls a (Chl a) and b (Chl b) in hydrocarbon solvents 3-methylpentane and paraffin oil is presented. A strong red shift of the Q_y-absorption band from 663 to 746 nm (1678 cm^?1) is observed as the water adduct of Chl a is formed. The Chl a-water adduct shows a strong, nonconservative CD signal, which is characterized by a positive peak at 748 nm and two negative peaks at 720 and 771 nm. The maximum CD (A_L - A_R) is only one order of magnitude smaller than the isotropic absorption maximum. We propose that this exceptionally strong signal is the so-called psi-type CD. The LD spectrum was measured in a flow of paraffin oil. The isotropic absorption maximum peaks at 742 nm in paraffin oil, whereas the maximum of the LD signal is at 743 nm. The LD signal is positive over the whole water-adduct absorption band indicating that the transition dipole of the 742 nm transition is preferentially oriented along the long axis of the aggregate. The structure of the Chl b-water adduct is less well defined. The preparations of the Chl b-water adduct are unstable. The Chl b-water adduct absorption band maximum is at 683 nm. The CD signal of the Chl a-water adduct is about 200-fold the CD of the Chl b-water adduct. We could not orient the Chl b-water adducts by flow, which suggests that the adducts are small or disordered.