Physicochemical studies on hydrophobic PEO‐PPO‐PEO triblock copolymer micelles in SDS micellar environment

The shape, size, aggregation, hydration, and correlation times of water insoluble PEO‐PPO‐PEO triblock copolymer micelles with sodium dodecylsulfate (SDS) micelles were investigated using transport studies and dynamic light scattering technique. From the conductance of micellar solutions of the polymer in 25 mM SDS and 5 mM NaCl, the hydration of polymer micelles were determined using the principle of obstruction of electrolyte migration by the polymer. The asymmetry of the micellar particles of polymer and polymer‐SDS mixed micellar systems in 5 mM NaCl and their average axial ratios were calculated using intrinsic viscosity and hydration data obeying Simha–Einstein equation. Hydration number and micellar sizes were variable with temperature. The shape of the polymer micelles has been ellipsoidal rather than spherical. The micellar volume, hydrodynamic radius, radius of gyration, diffusional coefficients as well as translational, rotational and effective correlation times have been calculated from the absolute values of the axes. The partial molal volume of polymer micelles has also been determined and its comparison with the molar volume of pure polymer suggested a volume contraction due to immobilization of the water phase by the hydrophilic head groups of the polymer. The thermodynamic activation parameters for viscous flow favor a more ordered water structure around polymer micelles at higher temperatures. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2410–2420, 2007     

From the conformation of a single molecule to physical networks in highly interacting polymers: A small-angle neutron study

Small-angle neutron scattering has been used to study the conformation and structure of highly interacting macromolecules in complex fluids. The evolution of the structure has been investigated from the conformation of a single molecule through an association process to the formation of physical networks. Two highly interacting polymers, an ionic polymer (consisting of a perfluorinated backbone and an ionizable hydrophilic side chain dissolved in water/alcohol mixtures) and rodlike, highly conjugated phenylene ethylene molecules (dissolved in toluene), have been studied. Highly interacting polymers often form relatively long lasting physical networks with increasing polymer concentration. The driving force, however, is system-specific, and so are the micellar systems and physical networks formed. Although the two families of polymers under consideration are entirely different chemically, their strong interaction, either ionic or through π–π coupling, results in similarities in the complex fluids formed when they are dissolved in solutions. These include elongated configurations in dilute solutions, association into micelles, and eventually coalescence into physical networks. The ionic polymers form durable stable networks, whereas the rodlike polymers form a fragile, gel-like phase. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3165–3178, 2004     

Dynamics of supramolecular associative polymer networks at the interplay of chain entanglement,transient chain association,and chain‐sticker clustering

The dynamic mechanical properties of supramolecular associative polymer networks depend on the average number of entanglements along the network‐forming chains, N_e, and on their content of associative groups, f . In addition, there may be further influence by aggregation of the associative groups into clusters, which, in turn, is influenced by the chemical structure of these groups, and again by N_e and f of the polymer. Therefore, the effects of these parameters are interdependent. To conceptually understand this interdependency, we study model networks in which (a) N_e, (b) f , and (c) the chemical structure of the associative groups are varied systematically. Each network is probed by rheology. The clustering of the associative groups is assessed by analyzing the rheological data at the end range of frequency covered and by comparison of the number of supramolecular network junctions with the maximum possible number of binary transient bonds. We find that if the total number of the network junctions, which can be formed either by interchain entanglement or by interchain transient associations, is greater than a threshold of 13, then the likelihood of cluster formation is high and the dynamics of supramolecular associative polymer networks is mainly controlled by this phenomenon. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1209–1223     

Chiroptical aggregates from block copolymer bearing amino acid moieties in aqueous solution

Optically active poly(ethylene glycol) monomethyl ether‐b‐poly(methacryloyl‐L ‐leucine methyl ester) (denoted as MPEG‐b‐PMALM) copolymers were prepared via atom transfer radical polymerization (ATRP), using bromine (Br) end‐capped poly(ethylene glycol) monomethyl ether (denoted as MPEG‐Br) as macroinitiator in the presence of CuBr/tris(2‐dimethylaminoethy1)amine (Me₆TREN) as catalytic system. Broad range of morphologies, such as spherical, cylindrical, and vesicular micelles, which were prepared by initially dissolving prepared polymer in organic solvent at different concentration followed by addition various amount of water before dialysis against water to remove any added solvent, was observed by transmission electron microscope (TEM). More detailed chiroptical properties of the micelles/aggregates in aqueous solution were evaluated by circular dichroism (CD) spectroscopy as a function of micelles morphologies, polymer concentration, solvents employed, temperature, etc. The micellar solutions exhibit almost the same CD spectra regardless of its morphologies. The intensity of the CD spectra of the cylindrical micelles decreased in the molar ellipticities as the micellar concentration in water was increased. The Cotton effect was markedly changed when the solvent hydrophobicity was changed by addition of trifluoromethyl ethanol (TFME) to water. The intensity of the CD spectra decreased not too much within the temperature range from 20 °C to 90 °C, indicating good stability of the micelles upon temperature variation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1345–1355, 2009     

Controlling the melting of kinetically frozen poly(butyl acrylate-b-acrylic acid) micelles via addition of surfactant

We have studied the melting of polymeric amphiphilic micelles induced by small-molecule surfactant and explained the results by experimental determination of the interfacial tension between the core of the micelles and the surfactant solutions. Poly(n-butyl acrylate-b-acrylic acid) (PBA-b-PAA) amphiphilic diblock copolymers form kinetically frozen micelles in aqueous solutions. Strong interactions with surfactants, either neutral or anionic [C12E6, C6E4, sodium dodecyl sulfate (SDS)], were revealed by critical micelle concentration (cmc) shifts in specific electrode and surface tension measurements. Since both polymer and surfactant are either neutral or bear negative charges, the attractive interactions are not due to electrostatic interactions. Light scattering, neutron scattering, and capillary electrophoresis experiments showed important structural changes in mixed PBA-b-PAA/surfactant systems. Kinetically frozen micelles of PBA-b-PAA, that are hardly perturbed by concentration, ionization, ionic strength, and temperature stresses, can be disintegrated by addition of small-molecule surfactants. The interfacial energy of the PBA in surfactant solutions was measured by drop shape analysis with h-PBA homopolymer drops immersed in small-molecule surfactant solutions. The PBA/water interfacial energy gammaPBA/H2O of 20 mN/m induces a high energy cost for the extraction of unimers from micelles so that PBA-b-PAA micelles are kinetically frozen. Small-molecule surfactants can reduce the interfacial energy gammaPBA/solution to 5 mN/m. This induces a shift of the micelle-unimer equilibrium toward unimers and leads, in some cases, to the apparent disintegration of PBA-b-PAA micelles. Before total disintegration, polymer/surfactant mixtures are dispersions of polydisperse mixed micelles. Based on core interfacial energy arguments, the disintegration of kinetically frozen polymeric micelles was interpreted by gradual fractionation of objects (polydisperse dispersion mechanism), whereas the disintegration of polymeric micelles in a thermodynamically stable state was interpreted by an exchange between a population of large polymer-rich micelles and a population of small surfactant-rich micelles (bidisperse dispersion mechanism). Finally, in our system and other systems from the literature, interfacial energy arguments could explain why the disintegration of polymer micelles is either partial or total as a function of the surfactant type and concentration and the hydrophobic block molar mass of the polymer.     

阳离子表面活性剂混合胶团对2,4-二硝基氯苯水解反应的 催化作用

研究了阳离子表面活性剂混合胶团对2,4-二硝基氯苯(DNCB)碱性水解反应的催化作用。结果表明：(1)在十六烷基三甲基溴化铵(CTAB)和十六烷基溴化吡啶(CPB)混合溶液中DNCB水解一级速率常数k1与混合胶团中CTAB或CPB的摩尔分数有直线关系,表面活性剂形成理想的混合胶团。(2)辛基三甲基省化铵(OTAB)与CTAB,CPB的cmc值相差很大,在它们的混合胶团中OTAB含量极少,DNCB水解k1与CPB/OTAB混合胶团中CPB摩尔分数的关系与直线呈负偏差。(3)在CTAB(或CPB)与OTAB混合体系中OTAB起溴盐作用,使催化活性降低。用假相离子交换(PIE)模型对所得结果给出了定量的处理和解释。     

Synthesis of end‐functionalized AB copolymers. II. Synthesis and characterization of carboxyl‐terminated poly(ethylene glycol)–poly(amino acid) block copolymers

AB block copolymers composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(amino acid) with a carboxyl group at the end of PEG were synthesized with α‐carboxylic sodium‐ω‐amino‐PEG as a macroinitiator for the ring‐opening polymerization of N‐carboxy anhydride. Characterizations by ¹H NMR, IR, and gel permeation chromatography were carried out to confirm that the diblock copolymers were formed. In aqueous media this copolymer formed self‐associated polymer micelles that have a carboxyl group on the surface. The carboxyl groups located at the outer shell of the polymeric micelle were expected to combine with ligands to target specific cell populations. The diameter of the polymer micelles was in the range of 30–80 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3527–3536, 2004     

Synthesis and characterization of polyurethane anionomers with bisazoaromatic chromophores and carboxylate groups

A new diol with a bisazoaromatic pendant was prepared to obtain photosensible polymers suitable for dyed aqueous systems. A polyurethane bearing bisazoaromatic chromophores, based on a poly(tetramethylene oxide) diol (average molecular weight = 2000), 2,4‐tolylene diisocyanate, and the aforementioned azo diol, was synthesized and characterized. Bichromophoric polyurethane anionomers, prepared by a two‐step substitution of urethane hydrogen atoms with sodium carboxylate groups, were studied. The influence of the concentration of carboxylate groups (30–158 mequiv of ionic groups/100 g of polymer) on some polymer properties and photoisomerism in polymer solutions and thin films was examined. In particular, the polymer structure and its morphology dictated the proximity of anchored bisazo chromophores and the capability of intermolecular forces between dyes producing hydrogen aggregates in solutions and thin films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5463–5470, 2004     

Solution and latex properties of model alkali‐soluble rheology modifiers,synthesized via the reversible addition–fragmentation chain transfer process,and the effects of the ethylene oxide chain length on the rheological properties

Model alkali‐soluble rheology modifiers were synthesized through the reversible addition–fragmentation chain transfer polymerization of methyl methacrylate, methacrylic acid, and three different associative macromonomers containing 20, 50, and 100 ethylene oxide spacer units, respectively. The synthesized polymers showed well‐controlled molar masses and narrow molar mass distributions. The rheological properties of the model alkali‐soluble rheology modifiers were measured in alkali solutions and in the presence of a well‐characterized core–shell emulsion. The steady‐shear viscosity data for the emulsion solutions, thickened with the associative rheology modifiers, were described by the Carreau model. The rheology modifiers containing the macromonomers with the longest ethylene oxide spacer units produced the highest viscosity in the latex systems but the lowest viscosity in alkali solutions. The highest viscosities in alkali solutions were obtained for the rheology modifiers containing macromonomers with 50 ethylene oxide spacer units. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2502–2512, 2004     

Aggregation behavior of MPEG‐PCL diblock copolymers in aqueous solutions and morphologies of the aggregates

Poly(ethylene glycol)‐b‐polycaprolactone (MPEG‐PCL) diblock copolymers were synthesized via a ring‐opening polymerization of ε‐CL monomers with MPEG as an initiator. Their solubilities and apparent critical micelle concentrations (CMC) in aqueous solution were investigated as well as the determination of the micellar hydrodynamic diameter using dynamic light scattering (DLS). As PCL block length increased, the solubility and CMC decreased while diameters of micelles increased. The gel–sol transition behaviors were investigated using a vial tilting method. Aqueous solutions of copolymers undergo a gel to sol transition with increase in temperature when their polymer concentrations are above a critical gel concentration (CGC). The CGC of the copolymers and gel–sol transition temperature are influenced by the PCL chain length. The tapping mode AFM was performed by imaging the freeze‐dried deposits from the copolymer solutions on mica to investigate a process from free chains to micelles and to gel. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3406–3417, 2006     

Investigation of the effects of silicate modification on polymer‐layered silicate nanocomposite morphology

The morphological behavior of a series of polymer‐layered silicate nanocomposites (PLSNs) has been investigated. The goal was to probe the effect of “textured” silicate surfaces on PLSN morphology. The nanocomposites were fabricated by mixing montmorillonite clay that was carefully modified with tailor‐made polystyrene (PS) surfactants into a PS homopolymer matrix, where the chemical similarity of the matrix polymer and surfactants assures complete miscibility of surfactant and homopolymer. To examine the effect of silicate surface “texture,” clay was modified with combinations of long and short surfactants. The samples were then direct melt annealed to allow the equilibrium morphology to develop, and characterized by small‐angle X‐ray scattering. Based on the implications of the Balazs model and other work on the wetting behavior of polymer melts with longer surfactants and textured surfaces we expected that the intercalation of the homopolymer matrix material into the modified clay would be promoted. Extensive characterization of both the modified clays as well as the resultant nanocomposites clearly show that the modified clays exhibit a high degree of order, but also that only phase‐separated morphologies are formed in the corresponding nanocomposites. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4075–4083, 2004     

Volumetric Studies on Aqueous Solutions of Dodecyltrimethylammonium Bromide and 1-Dodecyl-3-methylimidazolium Bromide

The densities of aqueous solutions of mixed surfactants of dodecyltrimethylammonium bromide and 1-dodecyl-3-methylimidazolium bromide (DTAB/C₁₂mimBr) were measured at various compositions. The concentration dependent apparent molar volumes of these mixed surfactants were calculated and used to deduce the critical micelle concentrations (cmc) and the apparent molar volumes in the micelles and the continuous phase. The one-parameter Margules equation was applied to correlate the composition dependent cmc values and to obtain the activity coefficients and mole fractions of these surfactants in the mixed micelles, which were further used to calculate the excess Gibbs energies and the excess volumes. It was found that the excess Gibbs energies and the excess volumes of the mixed micelles are all negative, indicating that these mixed micelles are more stable and packed more tightly than their corresponding pure micelles.     

Interactions of hydrophobically modified polyelectrolytes with nonionic surfactants

Interactions of surfactants with hydrophobically modified polyelectrolytes in aqueous solutions are important in several applications such as detergency, cosmetics, food, and paints. Complexes formed in these systems raise some fundamental questions about the polymer-surfactant interactions that control their behavior. In this work, the interactions of a nonionic surfactant, penta-ethyleneglycol mono n-dodecyl ether (C(12)EO(5)), with a hydrophobically modified anionic polymer, poly(maleic acid/octyl vinyl ether) (PMAOVE), in aqueous solutions were studied using surface tension, viscosity, electron paramagnetic resonance (EPR) spectroscopy, light scattering, and fluorescence spectroscopic techniques. When the nonionic surfactant C(12)EO(5) was added to aqueous solutions of the anionic polymer PMAOVE, it was incorporated into the hydrophobic nanodomains of PMAOVE far below the the critical micelle concentration (cmc) of the surfactant. Two inflection points were observed corresponding to the critical complexation concentration (formation of mixed micelles composed of C(12)EO(5) and the octyl chains of PMAOVE) and the saturation concentration (saturation of the polymer with C(12)EO(5) molecules). Above the saturation concentration, the coexistence of pure C(12)EO(5) micelles and mixed micelles of PMAOVE and C(12)EO(5) was observed. Such a coexistence of complexes has major implications in their performance in colloidal processes.     

Controlled,radical reversible addition–fragmentation chain‐transfer polymerization in high‐surfactant‐concentration ionic miniemulsions

Living free‐radical polymerization of methacrylate and styrenic monomers with ionic surfactants was carried out with reversible addition–fragmentation chain transfer in miniemulsion with different surfactant types and concentrations. The previously reported problem of phase separation was found to be insignificant at higher surfactant concentrations, and control of the molar mass and polydispersity index was superior to that of published miniemulsion systems. Cationic and anionic surfactants were used to examine the validity of the argument that ionic surfactants interfere with transfer agents. Ionic surfactants were suitable for miniemulsion polymerization under certain conditions. The colloidal stability of the miniemulsions was consistent with the predictions of a specific model. The living character of the polymer that comprised the latex material was shown by its transformation into block copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 960–974, 2004     

Rheological and microcalorimetric studies of a model alkali‐soluble associative polymer (HASE) in nonionic surfactant solutions

Rheological experiments were carried out on a 1 wt % hydrophobically modified alkali‐soluble emulsion (HASE) solutions at pH ∼ 9 in the presence of nonionic polyoxyethylene ether type surfactant (C₁₂EO₂₃). The low shear viscosity and dynamic moduli increases at c > cmc until they reach a maximum at a critical concentration, c^m of approximately 1 mM (∼17 times the cmc of free surfactant) and then decrease. The dominant mechanism at cmc < c < c^m is an increase in the number of intermolecular hydrophobic junctions and a strengthening of the overall associative network structure. Above c^m, the disruption of the associative network causes a reduction in the number of junctions and strength of the overall network structure. The influence of C₁₂EO₂₃ on HASE before cmc could not be detected macroscopically by the rheological technique. However, isothermal titration calorimetry enables the determination of complex binding of surfactant to the polymer. Isothermal titration of C₁₂EO₂₃ into 0.1 wt % HASE indicates that the C₁₂EO₂₃ aggregation in water and 0.1 wt % HASE polymer solutions is entropically driven. A reduction in the critical aggregation concentration (cac) confirms the existence of polymer–surfactant interactions. The hydrophobic micellar junctions cause a decrease in the ΔH and ΔS of aggregation of the nonionic surfactant. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2019–2032, 2000     

Rheological properties of multisticker associative polyelectrolytes in semidilute aqueous solutions

Multisticker associative polyelectrolytes of acrylamide (≈86 mol %) and sodium 2‐acrylamido‐2‐methylpropanesulfonate (≈12 mol %), hydrophobically modified with N,N‐dihexylacrylamide groups (≈2 mol %), were prepared with a micellar radical polymerization technique. This process led to multiblock polymers in which the length of the hydrophobic blocks could be controlled through variations in the surfactant‐to‐hydrophobe molar ratio, that is, the number of hydrophobes per micelle (N_H). The rheological behavior of aqueous solutions of polymers with the same molecular weight and the same composition but with two different hydrophobic block lengths (N_H = 7 or 3 monomer units per block) was investigated as a function of the polymer concentration with steady‐flow, creep, and oscillatory experiments. The critical concentration at the onset of the viscosity enhancement decreased as the length of the hydrophobic segments in the polymers increased. Also, an increase in the N_H value significantly enhanced the thickening ability of the polymers and affected the structure of the transient network. In the semidilute unentangled regime, the behavior of the polymer with long hydrophobic segments (N_H = 7) was studied in detail. The results were well explained by the sticky Rouse theory of associative polymer dynamics. Finally, the viscosity decreased with an increase in the temperature, mainly because of a lowering of the sample relaxation time. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1640–1655, 2004     

STUDIES ON SELF-ASSOCIATIVE BEHAVIOR OF A NOVEL CATION AMPHIPHILIC POLYMER

A novel associating polymer P(AEBA) was synthesized by radical polymerization of the cationic amphiphilic monomer,4-(2-(acryloyloxy)ethoxy)benzyl tri-ethyl ammonium bromide(AEBA),in aqueous solutions.P(AEBA) displays a strong tendency for self-association in aqueous solutions and is sensitive to the external stimulation such as added salt.The associative properties and morphologies of P(AEBA) were studied by fluorescnece probe technique,viscometry and TEM.In dilute salt-free solutions P(AEBA) behaves as ...     

Effect of self‐assemblies of various surfactants in their single and mixed states on the BZ oscillatory reaction

Micelles of different surfactants are well known to affect chemical equilibria and reactivities by selectively sequestering the reagent substrates through electrostatic and hydrophobic interactions. In this article, the effects of micelles of various surfactants on different parameters of the Ce(IV)‐catalyzed Belousov–Zhabotinsky (BZ) oscillatory reaction at 35°C in nonstirred closed conditions are studied by employing spectrophotometry and tensiometry. Surfactants used in this study are the cationics hexadecyltrimethylammonium bromide (CTAB) and pentamethylene‐1,5‐bis(N‐hexadecyl‐N,N‐dimethylammonium)bromide gemini (Gemini), anionic sodium dodecylbenzene sulfonate (SDBS), and nonionic Brij58, whereas the binary surfactant systems used are cationic–nonionic CTAB+Brij58 and anionic–nonionic SDBS+Brij58. The results revealed that the induction period shows a definite variation with increasing concentration of different surfactants above their critical micelle concentration (cmc). The amplitudes of oscillation and absorbance maxima and minima are enhanced in the presence of micelles of CTAB and Gemini surfactants, whereas micelles of SDBS and Brij58 have almost no effect on the nature of the oscillations. However, mixed micelles of CTAB+Brij58 and SDBS+Brij58 binary mixtures show a quite different effect on the overall behavior of the oscillations. The enhanced effect of CTAB and Gemini surfactants on the overall nature of oscillations has been attributed to the positive charge on the surface of their micelles and to some extent on the presence of nitrogen in their head group. The effect of mixed binary micelles may be attributed to their synergistic nature. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 659–668, 2010     

Synthesis and aqueous solution properties of hydrophobically modified anionic acrylamide copolymers

In this investigation, hydrophobically modified polyacrylamide with low amounts of anionic long‐chain alkyl was synthesized by the free radical polymerization in deionized water. This water‐soluble copolymerization method is more convenient compared with the traditional micellar copolymerization methods. The copolymers were characterized using Fourier transform infrared, ¹H NMR, and the molecular weight and polydispersity were determined using gel permeation chromatography. The solution behavior of the copolymers was studied as a function of composition, pH, and added electrolytes. As NaCl was added to solutions of AM/C₁₁AM copolymers or pH was lowered, the shielding or elimination of electrostatic repulsions between carboxylate groups of the C₁₁AM unit lead to coil shrinkage. The steady shear viscosity and dynamic shear viscoelastic properties in semidilute, salt‐free aqueous solutions were conducted to examine the concentration effects on copolymers. In addition, the shear superimposed oscillation technique was used to probe the structural changes of the network under various stresses or shear conditions. We prepared hydrophobically modified polyacrylamide with N‐alkyl groups in the aqueous medium. The advantage of this method is that the production is pure without surfactants. These results suggest that the unique aqueous solution behavior of the copolymers is different from conventional hydrophobically associating acrylamide. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2465–2474, 2008     

The Fast Relaxation Process between Hydrophobically Modified Associating Polyacrylamide and Different Surfactants at the Water‐Octane Interface

In our previous work (Macromolecules 2004, 37:2930), we found that the hydrophobic blocks of polyacrylamide modified with 2‐phenoxylethyl acrylate (POEA) and anionic surfactant sodium dodecyl sulfate (SDS) may form mixed associations at octane/water interface. However, the process involving the exchange of surfactant molecules between monomers and mixed associations in interface is so fast that we cannot obtain its characteristic time. In this article, the interfacial dilational viscoelastic properties of another hydrophobically associating block copolymer composed of acrylamide (AM) and a low amount of 2‐ethylhexyl acrylate (EHA) (<1.0 mol%) at the octane‐water interfaces were investigated by means of oscillating barriers method and interfacial tension relaxation method respectively. The influences of anionic surfactant SDS and nonionic surfactant Triton X‐100 on the dilational viscoelastic properties of 7000 ppm polymer solutions were studied. The results showed that the interaction between P(AM/2‐EHA) and SDS was similar to that of P(AM/POEA) and SDS. Moreover, we got the relaxation characteristic time of the fast process involving the exchange of s Triton X‐100 molecules between monomers and mixed associations.

We also found that the interfacial tension response of hydrophobically associating water‐soluble copolymers to the sinusoidal oscillation of interfacial area at low bulk concentration is as same as that of the typical surfactants: the interfacial tension decreases with the decrease of interfacial area because of the increase of interfacial active components. However, the interfacial tension increases with the decrease of interfacial area at 7000 ppm P(AM/2‐EHA), which is believed to be correlative with the structure of absorbed film. The results of another hydrophobically associating polymer P(AM/POEA) and polyelectrolyte polystyrene sulfonate (PSS) enhanced our supposition. The phase difference between area oscillation and tension oscillation has also been discussed considering the apparent negative value.