Frontal polymerization synthesis and characterization of Konjac glucomannan‐graft‐acrylic acid polymers

Konjac glucomannan‐graft‐acrylic acid polymers, used as superabsorbent polymers (SAPs), were synthesized by frontal polymerization (FP). The features of front propagation including front velocity and maximum temperature (T_max) were influenced by the amount of glucomannan, initiator, and environment temperature. The graft copolymer was characterized by FTIR, DSC, and SEM. The amount of crosslinking agent mainly determined the crosslinking degree of SAPs that would affect the water absorbency and microstructure. Water absorbency of SAP was also investigated and most of them displayed high water absorption rate. The aforementioned results allow us to conclude that FP can be considered as a promising method to fabricate SAP for its excellent advantages. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3391–3398, 2009     

Biodegradable thermo‐ and pH‐responsive hydrogels for oral drug delivery

In this article, novel smart hydrogels based on biodegradable pH sensitive poly(L ‐glutamic acid‐g‐2‐hydroxylethyl methacrylate) (PGH) chains and temperature‐sensitive hydroxypropylcellulose‐g‐acrylic acid (HPC‐g‐AA) segments were designed and synthesized. The influence of pH and temperature on the equilibrium swelling ratios of the hydrogels was discussed. The optical transmittance of the hydrogels was also changed as a function of temperature, which reflecting that the HPC‐g‐AA part of the hydrogels became hydrophobic at the temperature above the lower critical solution temperature (LCST). At the same time, the LCST of the hydrogels had a visible pH‐dependent behavior. Scanning electron microscopic analysis revealed the morphology of the hydrogels before and after enzymatic degradation. The biodegradation rate of the hydrogels was directly related to the PGH content and the pH value. The in vitro release of bovine serum albumin from the hydrogels were investigated. The release profiles indicated that both the HPC‐g‐AA and PGH contents played important roles in the drug release behaviors. These results show that the smart hydrogels seem to be of great promise in pH–temperature oral drug delivery systems. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis,characterization, and evaluation of enzymatically degradable poly(N‐isopropylacrylamide‐co‐acrylic acid) hydrogels for colon‐specific drug delivery

The enzymatically degradable poly(N‐isopropylacrylamide‐co‐acrylic acid) hydrogels were prepared using 4,4^′‐bis(methacryloylamino)azobenzene (BMAAB) as the crosslinker. It was found that the incorporated N‐isopropylacrylamide (NIPAAm) monomer did not change the enzymatic degradation of hydrogel, but remarkably enhanced the loading of protein drug. The hydrogels exhibited a phase transition temperature between 4°C (refrigerator temperature) and 37°C (human body temperature). Bovine serum albumin (BSA) as a model drug was loaded into the hydrogels by soaking the gels in a pH 7.4 buffer solution at 4°C, where the hydrogel was in a swollen status. The high swelling of hydrogels at 4°C enhanced the loading of BSA (loading capability, ca. 144.5 mg BSA/g gel). The drug was released gradually in the pH 7.4 buffer solution at 37°C, where the hydrogel was in a shrunken state. In contrast, the enzymatic degradation of hydrogels resulted in complete release of BSA in pH 7.4 buffer solution containing the cecal suspension at 37°C (cumulative release: ca. 100 mg BSA/g gel after 4 days). Copyright © 2008 John Wiley & Sons, Ltd.     

Release of theophylline and aminophylline from acrylic acid/n‐alkyl methacrylate hydrogels

The swelling capacity and release rate of two homologous drugs, theophylline and aminophylline, from acrylic acid/n‐alkyl methacrylate hydrogels have been studied. The maximum equilibrium swelling increases as the molar fraction of acrylic acid or the chain length of the methacrylate in the hydrogels increases. Water diffusion to the hydrogels is non‐Fickian. Both drugs are released from the fully swollen hydrogels according to Fick's law. However, the drug release from xerogels deviates from Fick's law, especially for aminophylline. As expected because of its larger size, aminophylline diffuses more slowly than theophylline under similar experimental conditions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2756–2765, 2004     

Hydrogels for colon‐specific drug delivery: Swelling kinetics and mechanism of degradation in vitro

Hydrogels based on n‐alkyl methacrylate esters (n‐AMA) of various chain lengths, acrylic acid, and acrylamide crosslinked with 4,4′‐di(methacryloylmino)azobenzene were prepared. Swelling kinetics and the mechanism of degradation in vitro of the hydrogels as well as the mutual relations between both were studied by the immersion of slabs in buffered solutions at pH 7.4. The diffusion of water into the slabs was discussed on the stress‐relaxation model of polymer chains. The results obtained agreed well with Schott's second‐order diffusion kinetics. The gels are degradable by anaerobes in the colon. The results obtained showed that the degradation of networks proceeded via a pore mechanism. The factors influencing the swelling and degradation of the gels include the degree of crosslinking, the lengths of the n‐AMA side chains, and the composition. These hydrogels have the potential for colon‐specific drug delivery. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 3128–3137, 2001     

Enzymatic Synthesis of Chitin‐ and Chitosan‐graft‐Aliphatic Polyesters

Summary: The title polymers, in which both the stem and the graft are biodegradable, have been synthesized for the first time in a one‐pot, lipase‐catalyzed, graft‐polymerization reaction (in bulk, at 70 °C) of β‐butyrolactone (β‐BL) and ε‐caprolactone (ε‐CL) onto chitin and chitosan. The reactivity order of the lactones was found to be ε‐CL > β‐BL ≫ γ‐BL (no reaction). All the graft polymers prepared are insoluble in common organic solvents.

Synthesis of chitin‐ or chitosan‐graft‐aliphatic polyesters.     

“Clip” and “Click” Chemistries Combination: Toward Easy PEGylation of Degradable Aliphatic Polyesters

α‐Methoxy‐ω‐alkyne poly(ethylene glycol) (PEG) was tagged with pendent N‐hydroxy‐succinimidyl activated esters by photografting of a molecular clip. This easily synthesized heterofunctional PEG was found to be a versatile building block for (i) conjugation with an amino derivative and (ii) grafting to azido functional aliphatic polyesters backbone by Huisgen's 1,3‐dipolar cycloaddition. This original combination of “clip” and “click” reactions provides a versatile and straightforward pathway for the synthesis of functional amphiphilic and degradable copolymers valuable for biomedical applications such as in drug‐delivery.

     

Modeling the swelling pressure of degrading hydroxyethylmethacrylate‐grafted dextran hydrogels

Degrading hydroxyethylmethacrylate‐grafted dextran (dex‐HEMA) hydrogels generate a relatively sudden increase in osmotic pressure upon degradation into dextran solutions. This phenomenon is currently being examined as a possible means of developing a pulsatile drug‐delivery system. Here a mathematical model based on scaling concepts is presented to describe this sudden increase in swelling pressure and to provide a framework for the rational design of pulsatile delivery systems based on this phenomena. The model provides a good fit to the swelling pressures measured for dex‐HEMA gel/free dextran mixtures that simulate degrading dex‐HEMA gels. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3397–3404, 2004     

Synthesis,self‐assembly,drug‐release behavior,and cytotoxicity of triblock and pentablock copolymers composed of poly(ε‐caprolactone), poly(L‐lactide), and poly(ethylene glycol)

Biocompatible and biodegradable ABC and ABCBA triblock and pentablock copolymers composed of poly(ε‐caprolactone) (PCL), poly(L ‐lactide) (PLA), and poly(ethylene glycol) (PEO) with controlled molecular weights and low polydispersities were synthesized by a click conjugation between alkyne‐terminated PCL‐b‐PLA and azide‐terminated PEO. Their molecular structures, physicochemical and self‐assembly properties were thoroughly characterized by means of FT‐IR, ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, wide‐angle X‐ray diffraction, dynamic light scattering, and transmission electron microscopy. These copolymers formed microphase‐separated crystalline materials in solid state, where the crystallization of PCL block was greatly restricted by both PEO and PLA blocks. These copolymers self‐assembled into starlike and flowerlike micelles with a spherical morphology, and the micelles were stable over 27 days in aqueous solution at 37 °C. The doxorubicin (DOX) drug‐loaded nanoparticles showed a bigger size with a similar spherical morphology compared to blank nanoparticles, demonstrating a biphasic drug‐release profile in buffer solution and at 37 °C. Moreover, the DOX‐loaded nanoparticles fabricated from the pentablock copolymer sustained a longer drug‐release period (25 days) at pH 7.4 than those of the triblock copolymer. The blank nanoparticles showed good cell viability, whereas the DOX‐loaded nanoparticles killed fewer cells than free DOX, suggesting a controlled drug‐release effect. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis,characterization and evaluation of semi‐IPN hydrogels consisted of poly(methacrylic acid) and guar gum for colon‐specific drug delivery

The semi‐IPN hydrogels consisting of poly(methacrylic acid) and guar gum (GG) are prepared at room temperature using water as solvent. 5‐aminosalicylic acid (5‐ASA) is entrapped in the hydrogel in the synthesis of hydrogel and all entrapment efficiencies are found above 85%. The hydrogel shows excellent pH‐sensitivity. It exhibited minimum swelling in an acidic pH medium through the formation of a complex hydrogen‐bonded structure and maximal swelling due to the electrostatic repulsion due to the ionization of the carboxylic groups in pH 7.4 medium. The degradation in vitro shows that the degree of degradation (R%) depended on the concentration of cross‐linking agent and content of GG. The hydrogel shows a minimum release of 5‐ASA due to the complex hydrogen bonded structure of the hydrogels in the medium of pH 2.2. The enzymatic degradation of hydrogels by cecal bacteria can accelerate the release of 5‐ASA entrapped in the hydrogel in pH 7.4 medium. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis of pH‐responsive photocrosslinked hyaluronic acid‐based hydrogels for drug delivery

Photocrosslinked hyaluronic acid/poly(vinyl alcohol)‐styrylpyridinium (HA/PVA‐SbQ) hydrogels were synthesized for controlled antitumor drug delivery. The photocrosslinking reaction was rapid, and the time required for completely converting into the insoluble hydrogels was less than 500 s on exposure to 5 mW/cm² UV light irradiation. The resulting hydrogels exhibited sensitivity to the pH value of the surrounding environment. Scanning electron microscopic analysis revealed that the morphology and the pore size of the hydrogels could be controlled by changing the ratio of HA and PVA‐SbQ in the formulations. Paclitaxel (PTX)‐loaded hydrogel could also be formed rapidly by UV irradiation of a mixed solution of HA/PVA‐SbQ and PTX. Release profiles of PTX from the hydrogels showed pH‐dependent and sustained manner. Moreover, our data revealed that PTX released from the HA hydrogels remained biologically active and had the capability to kill cancer cells. In contrast, control groups of HA hydrogels without PTX did not exhibit any cytotoxicity. This study demonstrates the feasibility of using HA‐based hydrogels as a potential carrier for chemotherapeutic drugs for cancer treatments. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

UV-photocrosslinking of inulin derivatives to produce hydrogels for drug delivery application

In this work, INU, a natural polysaccharide, has been chemically modified in order to obtain new photocrosslinkable derivatives. To reach this goal, INU has been derivatized with MA thus obtaining four samples (INU-MA derivatives) as a function of the temperature and time of reaction. An aqueous solution of the derivative INU-MA1 was irradiated by using a UV lamp with an emission range from 250 to 364 nm and without using photoinitiators. The obtained hydrogel showed a remarkable water affinity but it underwent a partial degradation in simulated gastric fluid. To overcome this drawback, INU-MA1 was derivatized with SA thus obtaining the INU-MA1-SA derivative designed to produce a hydrogel showing a low swelling and an increased chemical stability in acidic medium. Ibuprofen, as a model drug, was loaded by soaking into INU-MA1 and INU-MA1-SA hydrogels and its release from these matrices was evaluated in simulated gastrointestinal fluids. INU-MA1 hydrogel showed the ability to quickly release the entrapped drug thus indicating its potential as a matrix for an oral formulation. INU-MA1-SA hydrogel showed a pH-responsive drug delivery. Therefore it is a promising candidate for controlled drug release in the intestinal tract.     

Effect of PLGA block molecular weight on gelling temperature of PLGA‐PEG‐PLGA thermoresponsive copolymers

Thermoresponsive, biodegradable polymeric hydrogel networks are used widely in medicinal applications. Poly(d ,l ‐lactic acid‐co‐glycolic acid)‐b‐poly(ethylene glycol)‐b‐poly(d ,l ‐lactic acid‐co‐glycolic acid) (PLGA‐PEG‐PLGA) triblock copolymers exhibit a sol–gel transition upon heating. The effect of PLGA block and PEG chain molecular weights (MWs) on the gelling temperature of polymer aqueous solution (20% w/w) is described. All polymer solutions convert into a hard gel within 2 °C of the gelling temperature. The release properties of the gels were displayed using paracetamol as a representative drug. A linear relation is described between the gelling temperature and PLGA block MW. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 35–39     

Synthesis of poly(ethylene glycol)/polypeptide/poly(D,L‐lactide) copolymers and their nanoparticles

Core‐shell structured nanoparticles of poly(ethylene glycol) (PEG)/polypeptide/poly(D ,L ‐lactide) (PLA) copolymers were prepared and their properties were investigated. The copolymers had a poly(L ‐serine) or poly(L ‐phenylalanine) block as a linker between a hydrophilic PEG and a hydrophobic PLA unit. They formed core‐shell structured nanoparticles, where the polypeptide block resided at the interface between a hydrophilic PEG shell and a hydrophobic PLA core. In the synthesis, poly(ethylene glycol)‐b‐poly(L ‐serine) (PEG‐PSER) was prepared by ring opening polymerization of N‐carboxyanhydride of O‐(tert‐butyl)‐L ‐serine and subsequent removal of tert‐butyl groups. Poly(ethylene glycol)‐b‐poly(L ‐phenylalanine) (PEG‐PPA) was obtained by ring opening polymerization of N‐carboxyanhydride of L ‐phenylalanine. Methoxy‐poly(ethylene glycol)‐amine with a MW of 5000 was used as an initiator for both polymerizations. The polymerization of D ,L ‐lactide by initiation with PEG‐PSER and PEG‐PPA produced a comb‐like copolymer, poly(ethylene glycol)‐b‐[poly(L ‐serine)‐g‐poly(D ,L ‐lactide)] (PEG‐PSER‐PLA) and a linear copolymer, poly(ethylene glycol)‐b‐poly(L ‐phenylalanine)‐b‐poly(D ,L ‐lactide) (PEG‐PPA‐PLA), respectively. The nanoparticles obtained from PEG‐PPA‐PLA showed a negative zeta potential value of ?16.6 mV, while those of PEG‐PSER‐PLA exhibited a positive value of about 19.3 mV. In pH 7.0 phosphate buffer solution at 36 °C, the nanoparticles of PEG/polypeptide/PLA copolymers showed much better stability than those of a linear PEG‐PLA copolymer having a comparable molecular weight. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of poly(L‐lysine)‐graft‐polyesters through Michael addition and their self‐assemblies in aqueous solutions

A series of poly(L ‐lysine)s grafted with aliphatic polyesters, poly(L ‐lysine)‐graft‐poly(L ‐lactide) (PLy‐g‐PLLA) and poly(L ‐lysine)‐graft‐poly(?‐caprolactone) (PLy‐ g‐PCL), were synthesized through the Michael addition of poly(L ‐lysine) and maleimido‐terminated poly(L ‐lactide) or poly(?‐caprolactone). The graft density of the polyesters could be adjusted by the variation of the feed ratio of poly(L ‐lysine) to the maleimido‐terminated polyesters. IR spectra of PLy‐g‐PCL showed that the graft copolymers adopted an α‐helix conformation in the solid state. Differential scanning calorimetry measurements of the two kinds of graft copolymers indicated that the glass transition temperature of PLy‐g‐PLLA and the melting temperature of PLy‐g‐PCL increased with the increasing graft density of the polyesters on the backbone of poly(L ‐lysine). Circular dichroism analysis of PLy‐g‐PCL in water demonstrated that the graft copolymer existed in a random‐coil conformation at pH 6 and as an α‐helix at pH 9. In addition, PLy‐g‐PCL was found to form micelles to vesicles in an aqueous medium with the increasing graft density of poly(?‐caprolactone). © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1889–1898, 2007     

N‐Boc‐Histidine‐Capped PLGA‐PEG‐PLGA as a Smart Polymer for Drug Delivery Sensitive to Tumor Extracellular pH

A pH‐sensitive polymer was synthesized by introducing the N‐Boc‐histidine to the ends of a PLGA‐PEG‐PLGA block copolymer. The synthesized polymer was confirmed to be biodegradable and biocompatible, well dissolved in water and forming micelles above the CMC. DOX was employed as a model anticancer drug. In vitro drug release from micelles of N‐Boc‐histidine‐capped PLGA‐PEG‐PLGA exhibited significant difference between pH = 6.2 and pH = 7.4, whereas DOX release from micelles composed of un‐capped virgin polymers was not significantly sensitive to medium pH. Uptake of DOX from micelles of the new polymer into MDA‐MB‐435 solid tumor cells was also observed, and pH sensitivity was confirmed. Hence, the N‐Boc‐histidine capped PLGA‐PEG‐PLGA might be a promising material for tumor targeting.

     

Novel vesicles self-assembled from amphiphilic star-armed PEG/polypeptide hybrid copolymers for drug delivery

A novel amphiphilic four‐armed [poly(ε‐benzyloxycarbonyl‐L ‐lysine)]₂‐block‐poly(ethylene glycol)‐block‐[poly(ε‐benzyloxycarbonyl‐L ‐lysine)]₂ hybrid copolymer has been prepared. The cytotoxicity study shows that the copolymer has good biocompatibility with no obvious inhibition effect on cell growth. The amphiphilic copolymers could self‐assemble to form vesicles in aqueous solution. DOX · HCl, as a hydrophilic drug, can be loaded into the vesicles, and then successfully internalized by human breast cancer MCF‐7 cells. Importantly, the DOX‐loaded vesicles show a greatly improved drug release behavior with a zero‐order release at the initial stage, suggesting a great potential as the carrier of hydrophilic drugs for controlled drug delivery.

     

Molecular Nanoworm with PCL Core and PEO Shell as a Non‐spherical Carrier for Drug Delivery

Core/shell wormlike polymer brushes with densely grafted poly(ϵ‐caprolactone)‐b‐poly(ethylene oxide) (PCL‐b‐PEO) are synthesized via grafting an alkynyl terminated PCL‐b‐PEO (ay‐PCL₁₇‐b‐PEO₁₁₃) onto a well‐defined azido functionalized polymethacrylate (PGA₉₄₀) and are evaluated preliminarily as a single molecular cylindrical vehicle for drug delivery. Water soluble molecular worms of ca. 230 nm are obtained and then the anticancer drug doxorubicin (DOX) is loaded into its PCL core by hydrophobic interaction. Compared with spherical micelles from linear PCL₁₇‐b‐PEO₁₁₃, the brushes demonstrate a lower loading efficiency but a faster release rate of DOX. Confocal laser scanning microscopy measurements show that DOX‐loaded cylindrical molecular brushes can easily enter into HeLa and HepG2 cells in 1 h.