Periodic extinction bands composed of all flat‐on lamellae in poly(dodecamethylene terephthalate) thin films crystallized at high temperatures

Using in‐house synthesized poly(dodecamethylene terephthalate) (P12T) as a model, periodic extinction‐banded spherulites melt‐crystallized at high T_cs (100–115 °C) are expounded in terms of growth mechanism. The extinction‐banded spherulites wildly differing from the usual blue/orange double ring‐banded spherulites are composed of all flat‐on discrete single‐crystalline lamellae packed like roof shingles (or fish scales) along the circularly curved bands and the lamellae in the extinction bands are flat with a lozenge shape with no continuous twisting at all. For P12T films of more than 10 µm crystallized at T_c = 105–115 °C, no periodic bands were seen, and all spherulites were ringless, where periodic growth precipitation of crystals to extinction does not occur until impingement. Extinction bands in the P12T spherulites with the inter‐ring spacing steadily decrease with decreasing film thickness, because for thinner films (submicrons to 2 µm), draining or depletion of available molten species takes place more frequently, leading to bands of smaller inter‐ring spacing. The petal‐like extinction bands are discussed and analyzed in detail using 3D AFM imaging. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 601–611     

Side‐chain crystallization behavior of graft copolymers consisting of amorphous main chain and crystalline side chains: Poly(methyl methacrylate)‐graft‐poly(ethylene glycol) and poly(methyl acrylate)‐graft‐poly(ethylene glycol)

Graft copolymers consisting of amorphous main chain, poly(methyl methacrylate) (PMMA), or poly(methyl acrylate) (PMAc), and crystalline side chains, poly(ethylene glycol) (PEG), have been prepared by copolymerization of PEG macromonomers with methyl methacrylate or methyl acrylate (MMAx or MACx, respectively). Because of the compatibility of PMMA/PEG and PMAc/PEG, from small‐angle X‐ray scattering results, the main and side chains in graft copolymers were suggested to be homogeneous in the molten state. Differential scanning calorimetry (DSC) cooling scans revealed that PEG side chains for graft copolymers with large PEG fractions were crystallized when the sample was cooled, with a cooling rate of 10 °C/min. The spherulite pattern observed by a polarized optical microscope suggested the growth of PEG crystalline lamellae. Crystallization of PEG in MMAx was more restrained than in MACx. From these results, we have concluded that the crystallization behavior of the grafted side chains is strongly influenced by the glass transition of a homogeneously molten sample as well as dilution of the crystallizable chains. Domain spacings for isothermally crystallized graft copolymers were described by interdigitating chain packing in crystalline–amorphous lamellar structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 79–86, 2005     

Molecular deformation mechanisms of isotactic polypropylene in α‐ and β‐crystal forms by FTIR spectroscopy

The orientation behavior of isotactic polypropylene (iPP) in α‐ and β‐crystal form was investigated by rheo‐optical Fourier transformed infrared (FTIR) spectroscopy. This method enabled quantification of the degree of orientation as a feature of structural changes during uniaxial elongation in not only the crystalline phase but also the amorphous one. Molecular orientation mechanisms can be successfully derived from experimental results. Generally, three mechanisms were detected for iPP: (1) interlamellar separation in the amorphous phase, (2) interlamellar slip and lamellar twisting at small elongations, and (3) intralamellar slip at high elongations. The third mechanism was favored by α‐PP, whereas β‐PP favored the second mechanism, which, in fact, was responsible for the different mechanical properties of both materials at the macroscopic level. On the other hand, crystallization conditions may have significantly affected the amorphous orientation. Nevertheless, for both iPP types the chains in the amorphous phase always oriented less than did those in the crystalline phase. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 4478–4488, 2004     

Plastic deformation behavior of β phase isotactic polypropylene in plane‐strain compression at elevated temperatures

Isotactic polypropylene (iPP) rich in β crystal modification was deformed by plane‐strain compression at T = 55–100 °C. The evolution of phase structure, morphology, and orientation were studied by DSC, X‐Ray, and SEM. The most important deformation mechanisms found were interlamellar slip operating in the amorphous layers, resulting in numerous fine deformation bands and the crystallographic slip systems, including the (110)[001]_β chain slip and (110)[ ]_β transverse slip. Shear within deformation bands leads to β→α solid state phase transformation in contrast to β→smectic transformation observed at room temperature. Newly formed α crystallites deform with an advancing strain by crystallographic slip mechanism, primarily the (010)[001]_α chain slip. As a result of deformation and phase transformation within deformation bands β lamellae are locally destroyed and fragmented into smaller crystals. Deformation to high strains, above e = 1, brings further heavy fragmentation of lamellae, followed by fast rotation of crystallites with chain axis towards the direction of flow FD. This process, together with still active crystallographic slip, leads to the final texture with molecular axis of both crystalline β and α phase oriented along FD. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 92–108, 2008     

Evolutions of morphology and crystalline ordering upon annealing of quenched isotactic polypropylene

Quenched mesomorphic isotactic polypropylene precursor material has been investigated as well as the material annealed at different temperatures. At room temperature, morphology and crystalline ordering of the materials have been studied by atomic force microscopy (AFM) and wide‐angle X‐ray diffraction (WAXD). The nodular morphology of the mesomorphic precursor remains constant for annealing temperatures T_a below 120 °C. Needle‐like or leaf‐like crystals form when T_a approaches the melting temperature of the precursor. WAXD data analyzed by peak‐fitting indicate that the crystalline ordering along both the chain axis and the lateral directions quickly develops during the mesomorphic‐to‐monoclinic transition, but slowly after the transition (T_a > 140 °C). Combining the AFM and WAXD results it is proposed that two decoupled structure evolution mechanisms are occurring. During the transition, only the crystalline ordering is increasing, but not the size of the nodules. After the transition, the geometry of the nodules changes considerably, whereas there is little additional increase of crystalline ordering. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1703–1712, 2009     

Structural and conformational changes during thermally‐induced crystallization of poly(trimethylene terephthalate) by infrared spectroscopy

Conformational changes occurring during thermally‐induced crystallization of poly(trimethylene terephthalate) (PTT) by annealing have been studied using density measurement, differential scanning calorimetry (DSC), and mid‐infrared spectroscopy (MIR). Infrared spectra of amorphous and semicrystalline PTT were obtained, and digital subtraction of the amorphous contribution from the semicrystalline PTT spectra provided characteristic MIR spectra of amorphous and crystalline PTT. The normalized absorbance of 1577, 1173, and 976 cm^?1 were plotted against the crystallinity showing that these bands can be used unambiguously to represent the trans conformation while the band at 1358 cm^?1 can be used to represent gauche conformation of methylene segment. The presence of a weak band at 1358 cm^?1 in the amorphous spectrum suggested that a small amount of gauche conformation is present in the amorphous phase. Infrared spectroscopy has been used for the first time as a means to estimate the trans and gauche conformations of methylene segments in PTT as a function of T_a. The amount of gauche conformation was plotted against the crystalline fraction and the extrapolation of this plot to zero crystalline fraction provided a value of 0.07, suggested that the pure amorphous phase consist of ～ 7% gauche conformation. It was found that the amorphous and crystalline gauche conformation increases at the expense of amorphous trans conformation during thermally induced crystallization of PTT. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1497–1504, 2008     

The influence of cavitation phenomenon on selected properties and mechanisms activated during tensile deformation of polypropylene

The cavitation phenomenon accompanies the tensile deformation of most semicrystalline polymers when negative pressure inside the amorphous phase is generated. Over the years, this phenomenon has been marginalized, due to the common belief that it does not have any significant influence on the properties or micromechanisms activated during plastic deformation of such materials. In this article, for the first time, the influence of the cavitation phenomenon on the value of yield stress/strain, the intensity of the lamellae fragmentation process, the reorientation dynamics of the crystalline and amorphous component, the degree of crystals orientation at selected stages of deformation, and the amount of heat generated as a result of activating characteristic micromechanisms of plastic deformation were systematically analyzed. The research has been conducted for cavitating/non‐cavitating polypropylene model systems with an identical structure of crystalline component during their tensile deformation. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1853–1868     

Structure of polypropylene crystallized in confined nanolayers

Films with a thousand alternating layers of isotactic polypropylene (PP) and polystyrene (PS) were prepared by layer‐multiplying coextrusion. The crystal structure of extremely thin PP layers confined between PS layers was studied by optical light microscopy (OM), atomic force microscopy (AFM), differential scanning calorimetry (DSC), small‐angle X‐ray scattering (SAXS), and wide‐angle X‐ray scattering (WAXS). Changes in structure were observed as the PP layer thickness decreased to the nanoscale. The thin PP discoids were largely composed of edge‐on lamellae with (040) planes lying flat on the interface. In layers 65 and 10‐nm thick, compressed d‐spacings in the directions perpendicular to the chains and loss of registry along the chain axis were suggestive of smectic packing of conformationally distorted chains. Even so, crystalline lamellae were distinguishable in the AFM images. In addition to the crystal population with (040) planes parallel to the interface, the WAXS from layers 65‐nm thick revealed another crystal fraction with (110) planes parallel to the interface and (040) planes perpendicular to the interface. This fraction was more evident in layers 10‐nm thick, where it accounted for approximately 10–20% of the crystallinity. Decreasing layer thickness resulted in a change of the crystal growth plane from the usual (110) to the more rare (010). The new crystal structure possibly served to fill‐in the radial structure of the dendritic discoids when a limitation to the thickness of the layer left only a little space for secondary nucleation of the crosshatched lamella. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3380–3396, 2004     

Polydispersity of ethylene sequence length in metallocene ethylene/α‐olefin copolymers. I. Characterized by thermal‐fractionation technique

In this article, the polydispersity of the ethylene sequence length (ESL) in ethylene/α‐olefin copolymers was studied by atomic force microscopy (AFM) and the thermal‐fractionation technique. The crystal morphology observation by AFM showed that morphology changed gradually with decreasing average ESL from complete lamellae over shorter and more curved lamellae to a granular‐like morphology, and the mixed morphology was observed after stepwise crystallization from phase‐separated melt. This result indicated that the ethylene sequence with different lengths crystallized into a crystalline phase with a different size and stability at the copolymer systems. The thermal‐fractionation technique was used to characterize the polydispersity of ESL. Three of the following statistical terms were introduced to describe the distribution of ESL and the lamellar thickness: the arithmetic mean L?_n, the weight mean L?_w, and the broadness index I = L?_w/L?_n. It was concluded that the polydispersity of ESL could be quantitatively characterized by the thermal‐fractionation technique. The effects of temperature range, temperature‐dependent specific heat capacity C_p of copolymer, and the molecular weight on the results of thermal fractionation were discussed. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 813–821, 2002     

Polybenzobisimidazole‐derived two‐dimensional supramolecular polymer

We report a novel crystalline supramolecular polybenzobisimidazole (SP‐PBBI) capable of providing a two‐dimensional polymer (2DSP‐PBBI) by liquid‐phase exfoliation. A regular arrangement of rigid rod‐like polybenzobisimidazole (PBBI) chains is achieved by interchain hydrogen bonding. Titration of 2DSP‐PBBI with cobalt chloride (CoCl₂) using UV‐Vis spectroscopy demonstrates the presence of bidentate NO ligands on the PBBI backbone and NO–Co(II) complexation. Imaging analysis using atomic force microscopy (AFM) reveals the planar surface morphology of exfoliated 2DSP‐PBBI sheets with lateral dimensions of <1 μm and thickness of <30 nm. The size of the polymer crystal growth is tuned by employing condensation/precipitation polymerization under nonisothermal conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1095–1101     

Crystal and phase morphology of dynamic-packing-injection-molded high-density polyethylene/ethylene vinyl acetate blends

The effect of shear stress, provided by so-called dynamic-packing injection molding, on crystal morphology and phase behavior was investigated for high-density polyethylene (HDPE) in blends with ethylene vinyl acetate (EVA) of various viscosities and vinyl acetate (VA) contents, with the aid of differential scanning calorimetry, two-dimensional small-angle X-ray scattering (2D SAXS), and scanning electron microscopy (SEM). A shish-kebab pattern was found in the oriented zones of dynamic samples, and the ratio of shish to kebab increased as a function of the EVA content in the blends up to 20 wt %, regardless of the VA content. This showed that molecules of HDPE could easily be stretched to form a shish structure in the presence of EVA. Moreover, a large increase in the long spacing, characterized by 2D SAXS measurements, was achieved because of the presence of EVA. The SEM results showed an obvious decrease in the domain size of the EVA phase under the effect of shear stress. All these results suggested shear-induced mixing between HDPE and EVA, in that ethylene segments of EVA molecules could be forged in the shish structure during shear and the other fractions of EVA were located in the amorphous regions between the adjacent lamellae of HDPE. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1831–1840, 2004     

Effect of annealing on microstructure and mechanical properties of polypropylene random copolymer

In this work, polypropylene random copolymer (PPR) was taken as an example to study the changes of mechanical properties related to its microstructure evolution. Firstly, the toughness and fracture morphology were analyzed by notched Izod impact test and scanning electron microscope. Annealing at relative lower temperatures (<100°C), mechanical properties are slightly enhanced, which should be pointed out that significant improvements have been observed when annealing at relative higher temperatures (>100°C). Secondly, the study was conducted from the conventional differential scanning calorimetry, wide angle X-ray diffraction, and small-angle X-ray scattering to analyses the changes in the crystalline and amorphous regions. Dynamic thermomechanical analysis was employed to explore the changes of molecular mobility in samples after annealing at different temperatures. Moreover, to find out the stress transfer between the crystalline regions and the amorphous regions, we did further analysis of the typical stress–strain curves and proposed the mechanism of microstructure evolution during annealing process. The results shown that amorphous rearranged and formed thinner lamellae when annealing at relative low temperature. While annealing at higher temperatures, the mobile and rigid amorphous regions rearranged into more perfect lamellae and the density of stress transmitters was increased significantly.     

Morphology control of polypropylene by crystallization under carbon dioxide

We investigated the crystalline morphology of isotactic polypropylene obtained by melt crystallization under carbon dioxide (CO₂) at various pressures. Spherulites consisting of regularly arranged fibrils without subsidiary lamellae were obtained by crystallization under CO₂ below 2 MPa, whereas large spherulites consisting of irregularly arranged fibrils with subsidiary lamellae were obtained under ambient pressure. Distorted domain crystals with uniform optical anisotropy consisting of α‐form were found to be obtained under CO₂ above 2 MPa, and needle crystals consisting of γ‐form were obtained above 12 MPa. Transmission electron micrographs showed that straight and thick lamellae are regularly arranged in both the distorted domain crystals and the needle crystals. The uniformly thick lamellae were confirmed by differential scanning calorimetry thermograms; that is, the melting temperature is higher and the melting peak is sharper than those obtained under ambient pressure. Such characteristic crystalline morphologies obtained under CO₂ may be attributed to local ordering in the melt state. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2738–2746, 2004     

Poly(methylphenyl) silane: Structural properties

The physical structure of poly(methylphenyl) silane (PMPS) has been investigated using wide-angle x-ray scattering at various temperatures and optical polarizing microscopy. The results obtained by these techniques clearly show the existence of an ordered phase in PMPS. The crystallinity of our sample was estimated to be about 10% at room temperature. Below 190°C, the atactic chains pack into a monoclinic crystalline lattice of near hexagonal symmetry, with two types of disorder existing in the packing. At about 190°C, a phase transition to a liquid crystalline columnar hexagonal packing (D_ho) occurs. Finally, the sample melts into an isotropic amorphous phase. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35: 1727–1736, 1997     

Features of the hedritic morphology of β‐isotactic polypropylene studied by atomic force microscopy

The lamellar organization of melt‐crystallized β‐isotactic polypropylene was studied by atomic force microscopy (AFM) after permanganic etching. Hedritic objects grown at a high crystallization temperature (140–143 °C) were investigated. Essential features of the hedritic development were revealed by the characteristic projections exposed at the sample surface. A three‐dimensional view of the morphology was obtained by AFM. Hedritic growth proceeded mainly by branching around screw dislocations resulting in new lamellae that further developed. Successive lamellar layers often diverged. Deviation from the planar lamellar habit was observed, varying with the position within the hedrite. Twisting of the lamellae also was observed occasionally in the vicinity of the screw dislocations. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 672–681, 2000     

Structure and morphology of nanocomposite films prepared from polyvinyl alcohol and silver nitrate: Influence of thermal treatment

Hybrid organic/inorganic films have been prepared from an aqueous solution of polyvinyl alcohol (PVA) and silver nitrate (AgNO₃). The silver nanoparticles have been generated in the PVA matrix by thermal treatments. The structure and the morphology of the hybrid films have been studied as a function of the silver precursor concentration and of the annealing conditions for a wide range of annealing temperatures. It was shown that in the uncured hybrid film most of the silver ions were initially coordinated with the polymer OH groups to form a chelate structure. A nanostructuration effect leading to the formation of crystalline silver nanoparticles was evidenced for annealing treatments performed at temperatures higher than 90 °C. For a curing temperature equal to 110 °C, the sizes of the formed nanoparticles were only slightly increasing as a function of annealing time and the effect of AgNO₃ complex amount in this curing condition was also significant, but slight. Annealing at a temperature equal to 160 °C thus at a temperature for which a part of the crystalline phase of PVA was melt led to an important increase of the size of the generated metal nanoparticles. The evolution of the morphology was discussed for each curing temperature as a function of the kinetics of the nanostructuration, of the size of the matrix amorphous lamellae and of the polymer chain mobility. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2657–2672, 2007     

Conformational changes and phase transformation mechanisms in PVDF solution‐cast films

The supramolecular crystal structure in poly(vinylidene fluoride) (PVDF) solution‐cast films is studied through changing crystallization conditions in two solvents of different structures and polarities. The crystalline‐state chain conformations of isothermally solution‐crystallized PVDF in N, N‐dimethylacetamide (DMAc), and cyclohexanone are studied through the specific FTIR absorption bands of α, β, and γ phase crystals. There are no changes in the FTIR spectra of cyclohexanone solution‐crystallized films in the temperature range of 50–120 °C. In the case of DMAc solution‐crystallized films, low temperature crystallization mainly results in formation of trans states (β and γ phases), whereas at higher temperatures gauche states become more populated (α phase). This is due to the variations in solvent polarity and ability to induce a specific conformation in PVDF chains, through the changes in chain coil dimensions. This indicates that in spite of cyclohexanone solutions, the intermolecular interactions between PVDF and DMAc are temperature‐sensitive and more important in stabilizing conformations of PVDF in crystalline phase than temperature dependence of PVDF chain end‐to‐end distance <r²>. The high‐resolution ¹⁹F NMR spectroscopy also showed little displacement in PVDF characteristic chemical shifts probably due to changes in PVDF chain conformation resulting from temperature variations. Upon uniaxial stretching of the prepared films under certain conditions, contribution of trans state becomes more prominent, especially for the originally higher α phase‐containing films. Due to formation of some kink bands during film stretching and phase transformation, α phase absorption bands are still present in infrared spectra. Besides, uniaxial stretching greatly enhances piezoelectric properties of the films, maybe due to formation of oriented β phase crystals, which are of more uniform distribution of dipole moments. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3487–3495, 2004     

Melting behavior in blends of isotactic polypropylene and a liquid crystalline polymer

The influence of low contents of a liquid crystalline polymer on the crystallization and melting behavior of isotactic polypropylene (iPP) was investigated using electron and optical microscopy, differential scanning calorimetry, and X-ray diffraction. In pure iPP, the α modification was found, whereas for iPP/Vectra blends at Vectra concentration <5%, both α and β forms were observed. The amount of β phase varied from 0.23 to 0.16. Optical microscopy showed that Vectra was able to nucleate both α and β forms. Non-isothermal crystallization produces a material with a strong tendency for recrystallization of the α and β forms (αα′ and ββ′ recrystallization) leading to double endotherms for both crystalline forms in DSC thermograms. Melting thermograms after isothermal crystallization at low temperatures showed a similar behavior. At values of T_c > 119 °C for the α form and T_c > 125 °C for the β form, only one melting endotherm was observed because enough perfect crystals, not susceptible to recrystallization, were obtained. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1949–1959, 2004     

Hyperelastic characterization of the interlamellar domain and interphase layer in semicrystalline polyethylene

The interphase layer in semicrystalline polyethylene (PE) serves as the transition between the crystalline lamellae and the amorphous domains and is recognized as the third constituent of PE. When PE undergoes large deformations, this interphase layer together with the amorphous phase behaves hyperelastically. Because of the metastable nature and nanometric size of the interphase and its intimate mechanical coupling to the neighboring crystal and amorphous domains, detailed characterization of its hyperelastic properties have eluded detailed experimental evaluation. To extract these properties, a combined algorithm is proposed based on applying the constitutive relations of an isotropic, compressible, hyperelastic continuum to the molecular dynamics simulation results of a PE stack from Lee and Rutledge (Macromolecules 2011, 3096–3108). The simulation element is incrementally deformed to a large strain, during which the stress–strain information is recorded. Assuming a neo‐Hookean model, the tensorial constitutive equation is derived. The hyperelastic parameters for the central amorphous phase, the interphase layer, and the interlamellar domain are identified with the help of the optimization notion and a set of nonnegative objective functions. The identified hyperelastic parameters for the interlamellar domain are in good agreement with the ones estimated experimentally and frequently used in the literature for the noncrystalline phase. The specifically developed sensitivity analysis indicates that the shear modulus is identified with a higher degree of certainty, in contrast to the bulk modulus. It is also revealed that the presented continuum mechanics analysis is able to capture the melting/recrystallization and rotation of crystalline chains that take place during the deformation. The evolutions of the boundaries of the hyperelastic elements are also identified concurrently with the hyperelastic parameters as the by‐product of the presented methodology. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1692–1704     

Film foration and crystallization kinetics of polychloroprene studied by an ultrasonic shear wave reflection method

We report the application of an ultrasonic shear wave reflection technique for the investigation of film formation and crystallization kinetics of one amorphous and two semicrystalline polychloroprene samples with different gel content. Both isothermal and temperature-dependent measurements of the complex dynamic shear modulus (G* = G′ + iG″) have been performed at a frequency of 5.32 MHz. The process of film formation during the evaporation of water is expressed by a stepwise increase of the shear modulus. For the semicrystalline samples a further increase, which is due to crystallization, can be observed. Film formation and crystallization are delayed for the sample with high gel content and its minor final modulus is explained by a lower degree of crystallinity. The time-dependent increase of the shear modulus due to the growth of spherulites has been analyzed by the Avrami equation combined with the Kerner model for the modulus of a two-phase composite (spherulites in an amorphous matrix). The dynamic shear modulus for the spherulites has been estimated by a model introduced by Halpin and Kardos. © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 2949–2959, 1998