Novel side‐chain liquid‐crystalline polyimide for film materials

A novel side‐chain liquid‐crystalline polyimide (SLCPI) was prepared via copolycondensation from 3,5‐diamino‐benzonic‐4′‐biphenyl ester, 4,4′‐diamino‐ biphenyl ether, and 3,3′,4,4′‐oxydiphthalic dianhydride. The energy‐minimized structure and liquid crystallinity of SLCPI were investigated by molecular modeling, differential scanning calorimetry (DSC), wide‐angle X‐ray scattering, and polarized optical microscopy, respectively. The results indicated that this polyimide (PI) with side‐chain mesogenic units exhibited a nematic NI phase. Because of the in situ self‐reinforcement of side‐chain mesogenic units, the improved tensile strength and modulus of PI films reached 270% and 300%, respectively. The coefficient of thermal expansion of films decreased by 40%. DSC and thermogravimetric analyses indicated that the phase‐transition temperature of SLCPI was above 240 °C, and the 5% weight‐loss temperature was above 520 °C. Moreover, copolycondensation of two diamines with dianhydride and incorporation of pendent mesogenic units diminished the regularity and symmetry of main chains; as a result, SLCPI exhibits good film processability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 554–559, 2003     

Synthesis and properties of segmented main‐chain liquid‐crystalline polyurethanes with a high aspect ratio mesogenic diol as a chain extender

Main‐chain liquid‐crystalline polyurethanes were synthesized based on a high aspect ratio mesogenic diol (4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐benzoic acid 4‐{[4‐(6‐hydroxyhexyloxy)‐phenylimino]‐methyl}‐phenyl ester) as a chain extender; polycaprolactone (PCL) diol soft segments of different number‐average molecular weights (530, 1250, or 2000); and different diisocyanates, including 1,4‐hexamethylene diisocyanate (HMDI), 4,4′‐methylene bis(cyclohexyl isocyanate) (H₁₂MDI), and 4,4′‐methylene bis(phenyl isocyanate) (MDI). The structure of the polymers was confirmed with Fourier transform infrared spectroscopy, and differential scanning calorimetry and polarizing microscopy measurements were carried out to examine the liquid‐crystalline and thermal properties of the polyurethanes, respectively. The mesogenic diol was partially replaced with 20–50 mol % PCL. A 20 mol % mesogen content was sufficient to impart a liquid crystalline property to all the polymers. The partial replacement of the mesogenic diol with PCL of various molecular weights, as well as the various diisocyanates, influenced the phase transitions and the occurrence of mesophase textures. Characteristic liquid‐crystalline textures were observed when a sufficient content of the mesogenic diol was present. Depending on the flexible spacer length and the mesogenic content, grained and threadlike textures were obtained for the HMDI and H₁₂MDI series polymers, whereas the polyurethanes prepared from MDI showed only grained textures for all the compositions. The polymers formed brittle films and could not be subjected to tensile tests. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1527–1538, 2002     

Synthesis and phase behavior of side‐chain liquid‐crystalline polymers containing malachite green lactone groups

New side‐chain liquid‐crystalline polymers containing both cholesteric and thermochromic side groups were synthesized. Their chemical structures were confirmed with elemental analyses and Fourier transform infrared, proton nuclear magnetic resonance, and carbon‐13 nuclear magnetic resonance spectra. The mesogenic properties and phase behavior were investigated with differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy, and X‐ray diffraction measurements. The effect of the concentration of dye side groups on the phase behavior of the polymers was examined. The polymers showed smectic or cholesteric phases. Those polymers containing less than 20 mol % dye groups had good solubility, reversible phase transitions, wider mesophase temperature ranges, and higher thermal stability. The experimental results demonstrated that the isotropization temperature and mesophase temperature ranges decreased with an increasing concentration of dye groups. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3870–3878, 2004     

Photoreactive main‐chain liquid‐crystalline polyesters: Synthesis,characterization, and photochemistry

Three series of semiflexible and rigid main‐chain polyesters containing photoreactive mesogenic units derived from p‐phenylenediacrylic acid (PDA) and cinnamic acid have been synthesized by high‐temperature polycondensation. The thermal and mesomorphic properties of the polymers have been determined. The photochemical behavior of polymer P‐[1]‐T, which contains a PDA unit, has been studied both in solution and in films. In solution, [2+2] photocycloaddition, E/Z photoisomerization, and photo‐Fries rearrangement can take place. In contrast, the dominant process in spin‐coated films is the [2+2] photocycloaddition reaction, which causes crosslinking of the polymer. In films, the photochemistry and induction of anisotropy are strongly influenced by the aggregation of the PDA phenylester unit. A dichroism of about 0.2 has been induced in films by irradiation with linearly polarized UV light, and thus the capability of these films to induce optical anisotropy and align liquid crystals has been demonstrated. Liquid‐crystalline cells have been made with polarized irradiated films of P‐[1]‐T as aligning layers. A commercial liquid‐crystalline mixture has been used for this study, and a similar liquid‐crystalline order determined by polarized Fourier transform infrared to a commercial cell with rubbed polyimide as an aligning layer has been detected. Because of crosslinking of the irradiated P‐[1]‐T photoaligning layer, the photoinduced anisotropy is stable at high temperatures, and the liquid‐crystalline molecules are insoluble in the irradiated polymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4907–4921, 2005     

Synthesis and optical and electrochemical properties of thermotropic,liquid‐crystalline,semirigid copolyesters based on 2,5‐diphenyl‐1,3,4‐thiadiazole units

Novel thermotropic liquid‐crystalline (LC) copolyesters were prepared with three disubstituted (4,4′‐, 3,4′‐, and 3,3′‐) dioxydiundecanol derivatives of terphenyl analogues of 1,3,4‐thiadiazole [2,5‐diphenyl‐1,3,4‐thiadiazole (DPTD)], and their optical and electrochemical properties were examined. Their structures were characterized with Fourier transform infrared, ¹H NMR spectroscopy, and elemental analyses. The thermal and mesomorphic properties of the copolyesters were investigated with differential scanning calorimetry measurements, polarized microscopy observations, and X‐ray analyses; the data suggested that these copolymers formed LC smectic or nematic phases. The mesomorphic tendency decreased in the following order: 4,4′‐DPTD and 3,4′‐DPTD copolyesters > 4,4′‐DPTD and 3,3′‐DPTD copolyesters > 3,4′‐DPTD and 3,3′‐DPTD copolyesters. Solution and solid‐state ultraviolet–visible (UV–vis) and photoluminescence spectra indicated that the copolyesters displayed maximum absorbances and blue emissions according to the DPTD unit; the peak maxima of absorption and emission spectra of the copolyesters shifted to lower wavelengths in the aforementioned order for the LC properties. Cyclic voltammetry measurements indicated that the electrochemical band gaps of the polyesters estimated from the onset of reduction and oxidation processes were almost the same as the optical band gaps determined from the solid‐state UV–vis spectral data. The DPTD unit enhanced the hole‐injection barrier and improved the charge‐injection balance in these polyesters. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1511–1525, 2005     

Thermotropic liquid‐crystalline polymers containing five‐membered heterocyclic groups. X. Relationships between structures of semirigid polyesters based on three disubstituted 2,5‐diphenyl‐1,3,4‐thiadiazoles and thermotropic liquid‐crystalline and optical properties

Thermotropic liquid‐crystalline (LC) semirigid polyesters based on three terphenyl analogues of 1,3,4‐thiadiazole (2,5‐diphenyl‐1,3,4‐thiadiazole)s (DPTD) linking undecamethyleneoxy chain at different substituted positions were synthesized from three disubstituted (4,4′‐, 3,4′‐, and 3,3′‐) dioxydiundecanols of DPTD and four diesters, and the relationships between polymer structures and LC and optical properties were investigated. DSC measurements, texture observations, and wide‐angle X‐ray analyses revealed that the polymers composed of DPTD moiety having a more linear molecular structure and 1,4‐phenylene unit or short aliphatic chain tend to exhibit LC smectic C and/or A phases. The following observations were made: (1) the emergence of smectic C and/or A phases in all the polymers on the basis of 4,4′‐disubstituted DPTD, (2) formation of enantiotropic smectic C and/or A phases in the polymers containing a 1,4‐phenylene unit in the main chain, (3) formation of a more stable smectic C phase in the polymers having a short aliphatic [(CH₂)₄] chain, and (4) a decrease of the mesomorphic property of the polyesters in the order of 4,4′‐DPTD > 3,4′‐DPTD > 3,3′‐DPTD. Solution and solid‐state ultraviolet–visible and photoluminescent spectra indicated that all the polyesters display maximum absorbances and blue emissions arising from the DPTD moiety, whose peak maxima were shifted to lower wavelengths in the order of 4,4′‐DPTD > 3,4′‐DPTD > 3,3′‐DPTD as well as the aforementioned LC property. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2676–2687, 2003     

Synthesis and characterization of liquid‐crystalline epoxy and its blend with conventional epoxy

Terephthaloyl chloride was reacted with 4‐hydroxy benzoic acid to get terephthaloylbis(4‐oxybenzoic) acid, which was characterized and further reacted with epoxy resin [diglycidyl ether of bisphenol A (DGEBA)] to get a liquid‐crystalline epoxy resin (LCEP). This LCEP was characterized by Fourier transform infrared spectrometry, ¹H and ¹³C NMR spectroscopy, differential scanning calorimetry (DSC), and polarized optical microscopy (POM). LCEP was then blended in various compositions with DGEBA and cured with a room temperature curing hardener. The cured blends were characterized by DSC and dynamic mechanical analysis (DMA) for their thermal and viscoelastic properties. The cured blends exhibited higher storage moduli and lower glass‐transition temperatures (tan δ_max, from DMA) as compared with that of the pure DGEBA network. The formation of a smectic liquid‐crystalline phase was observed by POM during the curing of LCEP and DGEBA/LCEP blends. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3375–3383, 2003     

New liquid‐crystalline thermosets from liquid‐crystalline bisazomethynic epoxy resins with naphthylene disruptors in the central core

We synthesized novel epoxy‐terminated monomers on the basis of imine groups with spacers of different lengths between mesogens and reactive groups and examined their mesogenic properties. Their reaction with primary aromatic diamines and tertiary amines was carried out to investigate the formation of liquid‐crystalline thermosets. We explored how the curing conditions and the structures of the monomers and amines affected the formation of ordered networks. The special symmetry of a 1,5‐disubstituted naphthalene unit in the central core led to nematic mesophases in the pure liquid‐crystalline epoxy resins, and thermosets with locked nematic textures were obtained in all cases, regardless of the length of the spacer. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1536–1544, 2003     

Synthesis of laterally attached side‐chain liquid‐crystalline polynorbornenes with high mesogen density by ring‐opening metathesis polymerization

(±)‐exo,endo‐5,6‐Bis{[[11′‐[2″,5″‐bis[2‐(3′‐fluoro‐4′‐n‐alkoxyphenyl)ethynyl]phenyl]undecyl]oxy]carbonyl}bicyclo[2.2.1]hept‐2‐ene (n = 1–12) monomers were polymerized by ring‐opening metathesis polymerization in tetrahydrofuran at room temperature with Mo(CHCMe₂Ph)(N‐2,6‐ⁱPr₂Ph)(O^tBu)₂ as the initiator to produce polymers with number‐average degrees of polymerization of 8–37 and relatively narrow polydispersities (polydispersity index = 1.08–1.31). The thermotropic behavior of these materials was independent of the molecular weight and therefore representative of that of a polymer at approximately 15 repeat units. The polymers exhibited an enantiotropic nematic mesophase when n was 2 or greater. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4076–4087, 2006     

Dimeric liquid‐crystalline epoxyimine monomers: Influence of dipolar moments on mesomorphic behavior and the formation of liquid‐crystalline thermosets

We examine some of the structural aspects that influence the mesomorphic behavior of liquid‐crystalline dimeric epoxy resins with imine groups in the mesogens. We synthesized two new series of monomers and compared them with previously synthesized monomers. Compared with previously studied series, the imine group in the new monomers is oriented differently with respect to the ether and ester groups linked to the end of the mesogenic unit. Our results confirmed the importance of polarization of the mesogenic groups and the presence of an ester group in the inner position in the formation of smectic mesophases. By curing with primary and tertiary amines, we demonstrate that these two requirements are necessary if liquid‐crystalline thermosets are to be obtained with different degrees of order. These studies were carried out with differential scanning calorimetry, polarized optical microscopy, and X‐ray diffraction. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1465–1477, 2003     

Synthesis and crosslinking of a series of dimeric liquid‐crystalline diglycidylester compounds containing imine groups

We used readily available commercial reagents and well‐known procedures to synthesize a series of aromatic imine mesogenic diglycidylester compounds with dimeric architectures. The compounds obtained were characterized by spectroscopic techniques. Their liquid‐crystalline behavior was examined by differential scanning calorimetry, hot‐stage polarized optical microscopy (POM), and wide‐angle X‐ray scattering (WAXS) and related to the different structures that varied in the length of the central spacer. All the compounds exhibited nematic mesophases with the exception of the dimer with a three‐methylene central spacer that did not reveal liquid‐crystalline character. We investigated the crosslinking of the synthesized compounds and obtained liquid‐crystalline thermosets (LCTs) with several primary aromatic diamines in stoichiometric ratios or a tertiary amine as a catalyst. The curing processes were measured by calorimetry, and the thermal stability of the LCTs was evaluated by thermogravimetry. The ordered character of the LCTs was confirmed by POM and WAXS. Finally, the mechanical characterization of the LCTs obtained was examined by dynamic mechanical thermal analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4344–4356, 2002     

Crosslinking of vinyl‐terminated biphenyl and naphthalene side‐chain liquid‐crystalline poly(epichlorohydrin) derivatives

We performed the crosslinking of vinyl‐terminated biphenyl and naphthalene side‐chain liquid‐crystalline polyethers using peroxide‐type initiators with and without the addition of tertiary amine promoters. The crosslinking temperatures were chosen in the range of mesophase stability to allow the mesophase order to be frozen. The biphenyl derivatives, with a high isotropization temperature, were crosslinked to a large extent. This led to anisotropic thermosets. To crosslink naphthalene derivatives, amine promoters were needed, but degrees of crosslinking were lower, and anisotropic elastomers were obtained. Crosslinking processes were studied by differential scanning calorimetry, polarized optical microscopy, and Fourier transform infrared spectroscopy. The nature of the frozen mesophase was confirmed by X‐ray diffraction studies on mechanically oriented samples. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2237–2244, 2002     

Synthesis and characterization of side‐chain liquid crystalline polymers bearing cholesterol mesogen

A series of new norbornene carboxylic cholesteryl ester monomers with and without alkyl spacers, NBCh, and NBCh‐n , respectively, were synthesized. New side‐chain liquid crystalline homopolymers, PNBCh and PNBCh‐n , were cleanly prepared using NBCh and NBCh‐n , respectively, with Grubbs 2nd generation catalyst. Molecular and structural characterization of monomers and polymers were carried out by nuclear magnetic resonance, NMR, Fourier transform infrared, FT‐IR, spectroscopy, and gel permeation chromatography, GPC. The thermal and liquid crystalline properties of the homopolymers were investigated by differential scanning calorimetry, DSC, thermogravimetric analysis, TGA, and polarized optical microscopy, POM. Small angle and wide angle X‐ray studies of PNBCh‐n in powder and fiber states not only confirmed the formation of smectic A mesophases, but also established their morphologies. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2690–2701, 2009     

High‐molecular‐weight side‐chain liquid‐crystalline polyethers based on 4′‐cyanobiphenyl‐4‐oxy mesogenic groups

A set of poly[ω‐(4′‐cyano‐4‐biphenyloxy)alkyl‐1‐glycidylether]s were synthesized by the chemical modification of the corresponding poly(ω‐bromoalkyl‐1‐glycidylether)s with the sodium salt of 4‐cyano‐4′‐hydroxybiphenyl. New high‐molecular‐weight side‐chain liquid‐crystalline polymers were obtained with excellent yield and almost quantitative degree of modification. All side‐chain liquid‐crystalline polymers were rubbers soluble in tetrahydrofuran. The characterization by ¹H and ¹³C NMR revealed no changes in the regioregular isotactic microstructure of the starting polymer and the absence of undesirable side reactions such as deshydrobromination. The liquid crystalline behavior was analyzed by DSC and polarized optical microscopy, and mesophase assignments were confirmed by X‐ray diffraction. Polymers that had alkyl spacers with n = 2 and 4 were nematic, those that had spacers with n = 6 and 8 were nematic cybotactic, and those that had longer spacers (n = 10 and 12) were smectic C and showed some crystallization of the side alkyl chains. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3002–3012, 2004     

Surface modification of a liquid‐crystalline polymer for copper metallization

The effects of different surface modifications on the adhesion of copper to a liquid‐crystalline polymer (LCP) were investigated with X‐ray photoelectron spectroscopy, scanning electron microscopy, atomic force microscopy, contact‐angle measurements, and pull tests. High pull‐strength values were achieved when copper was sputter‐deposited onto plasma and reactive‐ion‐etching (RIE)‐pretreated LCP surfaces. The values were comparable to the reference pull strengths obtained with laminated copper on the LCP. The adhesion was relatively insensitive to the employed feed gas in the pretreatments. The surface characterizations revealed that for RIE and plasma treatments, the enhanced adhesion was attributable to the synergistic effects of the increased surface roughness and polar component of the surface free energy of the polymer. However, if the electroless copper deposition was performed on RIE‐ or plasma‐treated surfaces, very poor adhesion was measured. Good adhesion between the LCP substrate and electrolessly deposited copper was achieved only in the case of wet‐chemical surface roughening as a result of the creation of a sufficient number of mechanical interlocking sites, together with a significant loss of oxygen functionalities, on the surface. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 623–636, 2003     

Main‐chain viologen polymers with triflimide counterion exhibiting lyotropic liquid‐crystalline properties in polar organic solvents

The solution‐phase behavior of three main‐chain viologen polymers, which are composed of isomeric xylyl units and triflimide as a counterion, was studied in methanol, dimethylformamide, acetonitrile, and dimethyl sulfoxide as solvents microscopically under crossed polarizers. Each of them exhibited a lyotropic lamellar phase in both polar protic and aprotic solvents. Their C^* for the formation of biphasic solutions (1–5 wt %) and concentrations (20–30 wt %) for the lyotropic solutions in methanol was much lower than those in polar aprotic solvents (20–71 and 60–81 wt %, respectively). Their high solubility, high C^* for the formation of biphasic solutions, and high concentrations for the formation of lyotropic solutions in polar aprotic solvents were related to the significant reduction of strong ionic interactions between triflimide and 4,4′‐bipyridinium ions in each of these viologen polymers. They were the first examples of viologen polymers that exhibited a lyotropic phase in polar aprotic solvents. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2015–2024, 2002     

Anisotropic thermosets from liquid‐crystalline azomethynic epoxy resins and primary aromatic diamines

Novel epoxy‐terminated monomers based on imine groups were synthesized and their mesogenic properties studied. Aliphatic spacers of different lengths were introduced between the rigid unit and the glycidylic group, and their liquid‐crystalline behavior was examined. They were reacted with primary aromatic diamines inside a magnetic field so that the formation of anisotropic networks could be investigated. The influence of curing conditions and the structure of monomers and amines on the formation of liquid‐crystal thermosets were investigated. Thermosets with locked nematic textures were obtained in all cases. The influence of a 7.1 T magnetic field on the macroscopic orientation of these materials was studied, and mechanical properties of the resulting networks were evaluated by dynamic mechanical analysis. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1–12, 2003     

Liquid‐crystalline thermosets from liquid‐crystalline epoxy resins containing bisazomethinebiphenylene mesogens in the central core: Copolymerization with a nonmesomorphic epoxy resin

A new series of liquid‐crystalline epoxy resins was synthesized, and their mesomorphic behavior was investigated with differential scanning calorimetry, polarized optical microscopy, and wide‐angle X‐ray scattering. These glycidylic compounds had central aromatic imine mesogens derived from benzidine and aliphatic spacers of up to 10 methylene units that linked the mesogens to the glycidylic groups. Crosslinking these monomers with primary aromatic diamines led to nematic networks, some of which contained crystal inclusions. However, through curing with tertiary amines as catalytic agents or through copolymerization with different proportions of the nonmesomorphic epoxy monomer and primary amines as crosslinking agents, smectic C organized thermosets were prepared when the spacers had at least four methylene carbons. When they had fewer than four, the networks were nematic. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3631–3643, 2004     

Side chain liquid crystal poly(fumarate)s bearing tolane‐based mesogens

Cyanotolane or fluorotolane mesogens were for the first time introduced into the fumarate monomer under basic conditions. All fumarate monomers undergo radical polymerization in benzene in the presence of dimethyl 2,2′‐azobis(isobutyrate) as an initiator at 60 °C, affording the corresponding poly(fumarate)s with a molecular weight (M_n) of ～ 10⁴ and an exceptionally narrow polydispersity. The phase behaviors of the fumarate monomers and the correspoding poly(fumarate)s were comprehensively investigated by differential scanning calorimetry (DSC), polarized optical microscopy (POM), and X‐ray diffraction (XRD) analysis. For the fumarate monomers, fluorotolane derivatives were prone to form higher‐order liquid crystal phases such as a smectic phase, while cyanotolane derivatives tended to show a wide mesophase temperature range, depending on the alkyl chain spacer length. Very surprisingly, these features dramatically weakened when they were polymerized. The mesophase temperature ranges became narrow and completely disappeared for the poly(fumarate)s with a shorter alkyl chain spacer. A nematic phase representing lower‐order arrangements became a predominant liquid crystal phase for the poly(fumarate) carrying cyanotolane mesogens. Only the poly(fumarate) carrying fluorotolane mesogens with a longer alkyl chain spacer displayed the characteristic XRD patterns of the smectic B phase. The transient photocurrent measurements of the fumarate monomer with cyanotolane mesogens displayed a hole mobility of the order of 10^?4–10^?5 cm² V^?1 s^?1 at room temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5101–5114, 2008     

Electric‐field‐induced molecular alignment of side‐chain liquid‐crystalline polyacetylenes containing biphenyl mesogens

Electric‐field‐induced molecular alignments of side‐chain liquid‐crystalline polyacetylenes [? {HC?C[(CH₂)_mOCO‐biph‐OC₇H₁₅]}? , where biph is 4,4′‐biphenylyl and m is 3 (PA3EO7) or 9 (PA9EO7)] were studied with X‐ray diffraction and polarized optical microscopy. An orientation as high as 0.84 was obtained for PA9EO7. Furthermore, the molecular orientation of PA9EO7 was achieved within a temperature range between the isotropic‐to‐smectic A transition temperature and 115 °C, and this suggested that the orientational packing was affected by the thermal fluctuation of the isotropic liquid and the mobility of the mesogenic moieties. The maximum achievable orientation for PA9EO7 was much greater than that for PA3EO7. This was the first time that the electric‐field‐induced molecular orientation of a side‐chain liquid‐crystalline polymer with a stiff backbone was studied. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1333–1341, 2004