Macroinitiator halide effects in galactoglucomannan‐mediated single electron transfer‐living radical polymerization

Chloro (Cl)‐ and bromo (Br)‐functionalized macroinitiators were successfully prepared from the softwood hemicellulose O‐acetylated galactoglucomannan (AcGGM) and then explored and evaluated with respect to their ability and efficiency of initiating single electron transfer‐living radical polymerization (SET‐LRP). Both halogenated species effectively initiate SET‐LRP of an acrylate and a methacrylate monomer, respectively, yielding brushlike AcGGM graft copolymers, where the molecular weights are accurately controlled via the monomer:macroinitiator ratio and polymerization time over a broad range: from oligomeric to ultrahigh. The nature of the halogen does not influence the kinetics of polymerization strongly, however, for acrylate graft polymerization, AcGGM‐Cl gives a somewhat higher rate constant of propagation, while methacrylate grafting proceeds slightly faster when the initiating species is AcGGM‐Br. For both monomers, the macroinitiator efficiency is superior in the case of AcGGM‐Br. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Dithiocarbamate mediated controlled/living free radical polymerization of methyl acrylate under 60Co γ‐ray irradiation: Conjugation effect of N‐group

The free radical polymerizations of methyl acrylate have been studied under γ‐ray irradiation in the presence of the dithiocarbamates with different N‐groups. The results indicate that the conjugation structure of the N‐group of dithiocarbamate plays an important role in living free radical polymerization. The polymerizations reveal good living characteristics in the presence of dithiocarbamates (benzyl 1H‐imidazole‐1‐carbodithioate, benzyl 1H‐pyrrole‐1‐carbodithioate, benzyl 1H‐indole‐1‐carbodithioate, and benzyl 9H‐carbazole‐9‐carbodithioate) with N‐aryl group. In contrast, the polymerization with benzyl N,N‐diethyldithiocarbamate cannot be controlled, and the obtained polymer has a broad molecular weight distribution or even crosslink occurs. Moreover, polymerization rate is influenced by the conjugation structure of the N‐group of dithiocarbamate, and the aromatic polycyclic structure of the N‐group leads to slow polymerization. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5670–5677, 2004     

Ultrafast single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization of acrylates initiated with iodoform in water at room temperature and catalyzed by sodium dithionite

Sodium dithionite in the presence of NaHCO₃ in water acts as a single‐electron‐transfer agent and facilitates the single‐electron‐transfer/degenerative‐chain‐transfer mediated living radical polymerization (SET–DTLRP) of acrylates initiated with iodoform at room temperature. The resulting α,ω‐di(iodo)polyacrylates can be used as macroinitiators for the SET–DTLRP of other acrylates. Ultrahigh‐molar‐mass poly(tert‐butyl acrylate) can be synthesized via the SET–DTLRP of tert‐butyl acrylate and has a very low weight‐average molecular weight/number‐average molecular weight ratio of 1.15. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2178–2184, 2005     

Tailor‐made poly(ethyl acrylate) by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of ethyl acrylate (EA) was carried out using different initiators, CuBr or CuCl as catalyst in combination with different ligands e.g., 2,2′‐bipyridine (bpy) and N,N,N′,N″N″‐pentamethyl diethylenetriamine (PMDETA). Use of PMDETA as ligand resulted in faster polymerization rate (95% conversion in 15 min) than those using bipyridine (～58% conversion in 10.5 h). This is due to the lower reduction potential of copper‐amine than that of copper‐bpy complex, resulting in higher rates of activation of dormant halides. Use of ethylene carbonate as solvent lead to faster polymerization rate and better control in polymerization when compared with p‐xylene as solvent. The reaction temperature had a positive effect on polymerization rate and the optimum reaction temperature was found to be 90 °C. An apparent enthalpy of activation of ～85 kJ/mol was determined for the ATRP of ethyl acrylate, corresponding to an enthalpy of equilibrium of ～64 kJ/mol. By judicious choice of the reaction parameters it was possible to tailor the end group of the final polymer. MALDI‐TOF‐MS analysis and the chain extension experiment of poly(ethyl acrylate) (PEA) prepared using bpy as ligand showed the presence of ? Br as the end group. On the contrary, when PMDETA was used as the ligand, the mass spectra analysis showed hydrogen terminated polymer as the major species towards the end of polymerization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1661–1669, 2007     

PNIPAM‐b‐(PEA‐g‐PDMAEA) double‐hydrophilic graft copolymer: Synthesis and its application for preparation of gold nanoparticles in aqueous media

A series of well‐defined double‐hydrophilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) (PNIPAM‐b‐PEA) backbone and poly(2‐(dimethylamino)ethyl acrylate) (PDMAEA) side chains, were synthesized by the combination of single‐electron‐transfer living radical polymerization (SET‐LRP) and atom‐transfer radical polymerization (ATRP). PNIPAM‐b‐PEA backbone was first prepared by sequential SET‐LRP of N‐isopropylacrylamide and 2‐hydroxyethyl acrylate at 25 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system followed by the transformation into the macroinitiator by treating the pendant hydroxyls with 2‐chloropropionyl chloride. The final graft copolymers with narrow molecular weight distributions were synthesized by ATRP of 2‐(dimethylamino)ethyl acrylate initiated by the macroinitiator at 40 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as catalytic system via the grafting‐from strategy. These copolymers were employed to prepare stable colloidal gold nanoparticles with controlled size in aqueous solution without any external reducing agent. The morphology and size of the nanoparticles were affected by the length of PDMAEA side chains, pH value, and the feed ratio of the graft copolymer to HAuCl₄. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 1811–1824, 2009     

Synthesis of perfectly bifunctional polyacrylates by single‐electron‐transfer living radical polymerization

Poly(methyl acrylate)s, poly(ethyl acrylate)s, and poly(butyl acrylate)s with α,ω‐di(bromo) chain ends and M_n from 8500 to 35,000 were synthesized by single‐electron‐transfer living radical polymerization (SET‐LRP). The analysis of their chain ends by a combination of ¹H and 2D‐NMR, GPC, MALDI‐TOF MS, chain end functionalization, chain extension, and halogen exchange experiments demonstrated the synthesis of perfectly bifunctional polyacrylates by SET‐LRP. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4684–4695, 2007     

Atom transfer radical polymerization of hexyl acrylate and preparation of its “all‐acrylate” block copolymers

This investigation reports the polymerization of hexyl acrylate (HA) using atom transfer radical polymerization technique and subsequently the preparation of its di‐ and triblock copolymers with methyl methacrylate. Atom transfer radical polymerization of HA was investigated using different initiators and CuBr or CuCl as catalyst in combination with varying ligands, e.g., 2,2′‐bipyridine and N,N,N′,N″,N″‐pentamethyl diethylenetriamine. Reaction parameters were adjusted to successfully polymerize HA with well‐defined molecular weights and narrow polydispersity indices. The polymerization was better controlled by the addition of polar solvents, which created a homogeneous catalytic system. UV–vis analysis showed that the polar solvent, acetone coordinated with copper (I), changes the nature of the copper catalyst, thereby influencing the dynamic equilibrium of activation–deactivation cycle. This resulted in improved control over polymerization as well as in lowering the polydispersity indices, but at the cost of polymerization rate compared with the bulk process. The presence of ? Br end group in the polymer chains was confirmed by ¹H NMR as well as MALDI‐TOF mass analysis. In addition, poly(hexyl acrylate) was used as macroinitiator to prepare various “all‐acrylate” block (diblock, triblock) copolymers that were characterized by GPC and ¹H NMR. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3499–3511, 2008     

Controlled polymerization of N‐isopropylacrylamide with an activated methacrylic ester

A copolymer of N‐isopropylacrylamide with the N‐hydroxysuccinimide ester of methacrylic acid has found use in a variety of applications. Here we report our efforts to gain control over the molecular weight distribution of this copolymer with controlled radical polymerization methods, such as atom transfer radical polymerization, reversible addition–fragmentation transfer (RAFT), and nitroxide‐mediated polymerization. We have found that RAFT is capable of affording these copolymers with a polydispersity index of 1.1–1.2. Our results for all three polymerizations are reported. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 6340–6345, 2004     

Synthesis of well‐defined PNIPAM‐b‐(PEA‐g‐P2VP) double hydrophilic graft copolymer via sequential SET‐LRP and ATRP and its “schizophrenic” Micellization behavior in aqueous media

A series of well‐defined double hydrophilic graft copolymers, consisting of poly(N‐isopropylacrylamide)‐b‐poly(ethyl acrylate) backbone and poly(2‐vinylpyridine) side chains, were synthesized by successive single‐electron‐transfer living radical polymerization (SET‐LRP) and atom transfer radical polymerization (ATRP). The backbone was prepared by sequential SET‐LRP of N‐isopropylacrylamide and 2‐hydroxyethyl acrylate at 25 °C using CuCl/tris(2‐(dimethylamino)ethyl)amine as the catalytic system. The obtained diblock copolymer was transformed into the macroinitiator by reacting with 2‐chloropropionyl chloride. Next, grafting‐from strategy was used for the synthesis of poly(N‐isopropylacrylamide)‐b‐[poly(ethyl acrylate)‐g‐poly(2‐vinylpyridine)] double hydrophilic graft copolymer. ATRP of 2‐vinylpyridine was initiated by the macroinitiator at 25 °C using CuCl/hexamethyldiethylenetriamine as the catalytic system. The synthesis of both the backbone and the side chains are controllable. Thermo‐ and pH‐responsive schizophrenic micellization behaviors were investigated by ¹H NMR, fluorescence spectroscopy, dynamic light scattering, and transmission electron microscopy. Unimolecular micelles with PNIPAM‐core formed in acidic environment (pH = 2) with elevated temperature (T ≥ 32 °C), whereas the aggregates turned into spheres with PEA‐g‐P2VP‐core accompanied with the lifting of pH values (pH ≥ 5.3) at room temperature. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 15–23, 2010     

Optimization of the nitroxide‐mediated radical polymerization conditions for styrene and tert‐butyl acrylate in an automated parallel synthesizer

Automated parallel synthesizers provide fast and comparable screening of different polymerization parameters under similar conditions. In addition, these robotic systems eliminate handling errors, which may affect the results of a kinetic experiment more than the effect of an important parameter. The polymerization temperature and N,N‐tert‐butyl‐N‐[1′‐diethylphosphono‐2,2′‐dimethylpropyl]nitroxide concentration were optimized for the homopolymerization of both styrene and tert‐butyl acrylate to improve the control over the polymerization while reasonable polymerization rates were retained. Subsequently, polystyrene and poly(tert‐butyl acrylate) macro initiators were synthesized according to the knowledge obtained from the screening results. These macroinitiators were used for the preparation of block copolymers consisting of styrene and tert‐butyl acrylate. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6202–6213, 2006     

Kinetics and electron spin resonance study of the radical polymerization of n‐butyl acrylate mediated by a nitroxide precursor: C‐phenyl‐N‐tert‐butylnitrone

The C‐phenyl‐N‐tert‐butylnitrone/azobisisobutyronitrile pair is able to impart control to the radical polymerization of n‐butyl acrylate as long as a two‐step process is implemented, that is, the prereaction of the nitrone and the initiator in toluene at 85 °C for 4 h followed by the addition and polymerization of n‐butyl acrylate at 110 °C. The structure of the in situ formed nitroxide has been established from kinetic and electron spin resonance data. The key parameters (the dissociation rate constant, combination rate constant, and equilibrium constant) that govern the process have been evaluated. The equilibrium constant between the dormant and active species is close to 1.6 × 10^?12 mol L^?1 at 110 °C. The dissociation rate constant and the activation energy for the C? ON bond homolysis are 1.9 × 10^?3 s^?1 and 122 ± 15 kJ mol^?1, respectively. The rate constant of recombination between the propagating radical and the nitroxide is as high as 1.2 × 10⁹ L mol^?1 s^?1. Finally, well‐defined poly(n‐butyl acrylate)‐b‐polystyrene block copolymers have been successfully prepared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6299–6311, 2006     

Reversible addition–fragmentation transfer polymerization of p‐nitrophenyl acrylate and synthesis of diblock copolymers poly(p‐nitrophenyl acrylate)‐b‐polystyrene

Poly(p‐nitrophenyl acrylate)s (PNPAs) with different molecular mass and narrow polydispersity were successfully synthesized for the first time by reversible addition–fragmentation transfer (RAFT) polymerization with azobisisobutyronitrile (AIBN) as an initiator and [1‐(ethoxy carbonyl) prop‐1‐yl dithiobenzoate] as the chain‐transfer agent. Although the molecular mass of PNPAs can be controlled by the molar ratio of NPA to RAFT agent and the conversion, a trace of homo‐PNPA was found, especially at the early stage of polymerization. The dithiobenzoyl‐terminated PNPA obtained was used as a macro chain‐transfer agent in the successive RAFT block copolymerization of styrene (St) with AIBN as the initiator. After purification by two washings with cyclohexane and nitromethane to remove homo‐PSt and homo‐PNPA, the pure diblock copolymers, PNPA‐b‐PSt's, with narrow molecular weight distribution were obtained. The structural analysis of polymerization products by ¹H NMR and GPC verified the formation of diblock copolymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4862–4872, 2004     

Atom transfer radical polymerization of n‐butyl acrylate catalyzed by CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine

The homogeneous atom transfer radical polymerization (ATRP) of n‐butyl acrylate with CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine as a catalyst and ethyl 2‐bromoisobutyrate as an initiator was investigated. The kinetic plots of ln([M]₀/[M]) versus the reaction time for the ATRP systems in different solvents such as toluene, anisole, N,N‐dimethylformamide, and 1‐butanol were linear throughout the reactions, and the experimental molecular weights increased linearly with increasing monomer conversion and were very close to the theoretical values. These, together with the relatively narrow molecular weight distributions (polydispersity index ～ 1.40 in most cases with monomer conversion > 50%), indicated that the polymerization was living and controlled. Toluene appeared to be the best solvent for the studied ATRP system in terms of the polymerization rate and molecular weight distribution among the solvents used. The polymerization showed zero order with respect to both the initiator and the catalyst, probably because of the presence of a self‐regulation process at the beginning of the reaction. The reaction temperature had a positive effect on the polymerization rate, and the optimum reaction temperature was found to be 100 °C. An apparent enthalpy of activation of 81.2 kJ/mol was determined for the ATRP of n‐butyl acrylate, corresponding to an enthalpy of equilibrium of 63.6 kJ/mol. An apparent enthalpy of activation of 52.8 kJ/mol was also obtained for the ATRP of methyl methacrylate under similar reaction conditions. Moreover, the CuBr/N‐(n‐hexyl)‐2‐pyridylmethanimine‐based system was proven to be applicable to living block copolymerization and living random copolymerization of n‐butyl acrylate with methyl methacrylate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3549–3561, 2002     

2,2,2‐trifluoroacetophenone‐based D‐π‐A type photoinitiators for radical and cationic photopolymerizations under near‐UV and visible LEDs

Two D‐π‐A‐type 2,2,2‐trifluoroacetophenone derivatives, namely, 4′‐(4‐( N,N‐diphenyl)amino‐phenyl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Ben) and 4′‐(4‐(7‐(N,N‐diphenylamino)‐9,9‐dimethyl‐9H‐fluoren‐2‐yl)‐phenyl‐2,2,2‐trifluoroacetophenone (PI‐Flu), are developed as high‐performance photoinitiators combined with an amine or an iodonium salt for both the free‐radical polymerization of acrylates and the cationic polymerization of epoxides and vinyl ether upon exposure to near‐UV and visible light‐emitting diodes (LEDs; e.g., 365, 385, 405, and 450 nm). The photochemical mechanisms are investigated by UV‐Vis spectra, molecular‐orbital calculations, fluorescence, cyclic voltammetry, photolysis, and electron‐spin‐resonance spin‐trapping techniques. Compared with 2,2,2‐trifluoroacetophenone, both photoinitiators exhibit larger redshift of the absorption spectra and higher molar‐extinction coefficients. PI‐Ben and PI‐Flu themselves can produce free radicals to initiate the polymerization of acrylate without any added hydrogen donor. These novel D‐π‐A type trifluoroacetophenone‐based photoinitiating systems exhibit good efficiencies (acrylate conversion = 48%–66%; epoxide conversion = 85%–95%; LEDs at 365–450 nm exposure) even in low‐concentration initiators (0.5%, w/w) and very low curing light intensities (1–2 mW cm^?2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1945–1954     

Synthesis of double hydrophilic poly(ethylene oxide)‐b‐poly(2‐hydroxyethyl acrylate) by single‐electron transfer–living radical polymerization

In this study, the polymerization of (2‐hydroxyethyl) acrylate (HEA), in polar media, using Cu(0)‐mediated radical polymerization also called single‐electron transfer–living radical polymerization (SET‐LRP) is reported. The kinetics aspects of both the homopolymerization and the copolymerization from a poly(ethylene oxide) (PEO) macroinitiator were analyzed by ¹H NMR. The effects of both the ligand and the solvent were studied. The polymerization was shown to reach very high monomer conversions and to proceed in a well‐controlled fashion in the presence of tris[2‐(dimethylamino)ethyl]amine Me6‐TREN and N, N,N′, N″, N″‐pentamethyldiethylenetriamine (PMDETA) in dimethylsulfoxide (DMSO). SET‐LRP of HEA was also led in water, and it was shown to be faster than in DMSO. In pure water, Me₆‐TREN allowed a better control over the molar masses and polydispersity indices than PMDETA and TREN. Double hydrophilic PEO‐b‐PHEA block copolymers, exhibiting various PHEA block lengths up to 100 HEA units, were synthesized, in the same manner, from a bromide‐terminated PEO macroinitiator. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and crosslinking of hyperbranched poly(n‐nonyl acrylate) to form organogels

(2‐Bromo‐n‐nonan‐1‐oxycarbonyl)ethyl acrylate was synthesized as an inimer for self‐condensing vinyl polymerization (SCVP) to produce hyperbranched poly(n‐nonyl acrylate), either as a homopolymer or as a copolymer with n‐nonyl acrylate. The inimer was homopolymerized and copolymerized by atom transfer radical polymerization (ATRP) and activator generated by electron transfer ATRP to produce soluble polymers with broad polydispersities (up to ? = 9.91), which is characteristic of hyperbranched polymers produced by SCVP. The resulting hyperbranched (co)polymers were crosslinked by atom transfer radical coupling in both one‐pot and two‐step procedures. The radical–radical crosslinking reaction is extremely efficient, resulting in hard plastic particles from the homopolymer of (2‐bromo‐n‐nonan‐1‐oxycarbonyl)ethyl acrylate synthesized in bulk. Crosslinked organogels that swell in tetrahydrofuran were formed when the rate of crosslinking decreased using acetonitrile solutions. Dynamic shear and stress relaxation experiments demonstrated that the dry network behaves as a covalently crosslinked soft gel, with a glass transition at ?50 °C according to differential scanning calorimetry. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2399–2410     

Blue LED light‐sensitive benzo pyrazolo (or imidazo) isoquinolinone derivatives in high‐performance photoinitiating systems for polymerization reactions

Isoquinolinone derivatives (IQ) have been synthesized and combined with different additives (an amine, 2,4,6‐tris(trichloromethyl)‐1,3,5‐triazine, an iodonium salt, or N‐vinylcarbazole) to produce reactive species (i.e. radicals and cations) being able to initiate the radical polymerization of acrylates, the cationic polymerization of epoxides, the thiol‐ene polymerization of trifunctional thiol/divinylether, and the synthesis of epoxide/acrylate interpenetrated polymer network IPN upon exposure to very soft polychromatic visible lights, blue laser diode or blue LED lights. Compared with the use of camphorquinone based systems, the novel combinations employed here ensures higher monomer conversions (～50–60% vs. ～15–35%) and better polymerization rates in radical polymerization. The chemical mechanisms are studied by steady‐state photolysis, fluorescence, cyclic voltammetry, laser flash photolysis, and electron spin resonance spin trapping techniques. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 567–575     

Aqueous photopolymerization with visible‐light photoinitiators: Acrylamide polymerization photoinitiated with a phenoxazine dye/amine system

We studied the photoinduced electron‐transfer polymerization of acrylamide with, as a visible‐light initiator, the heterocycle‐N‐oxide resazurin in the presence of triethanolamine. The irradiation of resazurin produces resorufin, which also absorbs in the visible region. Both phenoxazine dyes in the presence of the amine are efficient photoinitiators of acrylamide polymerization in an aqueous medium. The polymerization rates were measured at several amine concentrations. These values increase with the amine concentration, reaching a maximum value; further amine addition slightly decreases the polymerization rate. Time‐resolved photolysis studies of the dyes were carried out under the polymerization conditions. The quenching of the dye excited states by the amine was analyzed with static‐fluorescence and laser‐flash photolysis. These data were used for fitting curves of the polymerization rate versus the amine concentration, and it was concluded that the interaction of triplet excited dyes with the amine leads to acrylamide polymerization. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 4074–4082, 2001     

Polymer–silicate nanocomposites produced by in situ atom transfer radical polymerization

Polymer–silicate nanocomposites were synthesized with atom transfer radical polymerization (ATRP). An ATRP initiator, consisting of a quaternary ammonium salt moiety and a 2‐bromo‐2‐methyl propionate moiety, was intercalated into the interlayer spacings of the layered silicate. Subsequent ATRP of styrene, methyl methacrylate, or n‐butyl acrylate with Cu(I)X/N,N‐bis(2‐pyridiylmethyl) octadecylamine, Cu(I)X/N,N,N′,N′,N″‐pentamethyldiethylenetriamine, or Cu(I)X/1,1,4,7,10,10‐hexamethyltriethylenetetramine (X = Br or Cl) catalysts with the initiator‐modified silicate afforded homopolymers with predictable molecular weights and low polydispersities, both characteristics of living radical polymerization. The polystyrene nanocomposites contained both intercalated and exfoliated silicate structures, whereas the poly(methyl methacrylate) nanocomposites were significantly exfoliated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 916–924, 2004