Metal‐template synthesis of cyclic epoxide–amine oligomers: Uncrosslinked epoxide–amine addition polymers, 47

The addition reaction of 2,2‐bis‐[4‐(2,3‐epoxypropoxy)‐phenyl]‐propane (DGEBA) and preformed complexes of metal ions and disecondary diamines led to a large quantity of cyclic epoxide–amine oligomers. As shown by gel permeation chromatographic analysis, cycles of n = 1, 2, and 3 were formed. Functional epoxide end groups of the prepared oligomers were completely missing in the IR and ¹H NMR and ¹³C NMR spectra. In the fast atom bombardment and matrix‐assisted laser desorption/ionization mass spectra, the molecular ions of the n = 1, 2, 3 cycles of DGEBA and N,N′‐dibenzyl‐5‐oxanonanediamine‐1,9 were detected at m/z = 680, 1361, and 2042. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2047–2052, 2003     

Living radical polymerization. II. Improved atom transfer radical polymerization of acrylamide in aqueous glycerol media with a novel pentamethyldiethylenetriamine‐based soluble copper(I) complex catalyst system

An improved atom transfer radical polymerization (ATRP) of acrylamide was achieved in a glycerol/water (1:1 v/v) medium with 2‐halopropionamide initiators, CuX (X = Cl or Br) as catalysts, pentamethyldiethylenetriamine (PMDETA) as a ligand, and CuX₂ (≥20 mol % CuX) and excess alkali halide (ca. 1 mol/dm³) as additives. The first‐order kinetic plots for the disappearance of the monomer at 130 °C were linear; this was a significant improvement over the results obtained earlier with the bipyridine ligand. However, even under such improved situations, about 7 mol % of the polymer chains were estimated to be formed dead. The polydispersity index was approximately 1.5. At a lower temperature (ca. 90 °C), a lower polydispersity index (1.24) was obtained for the bromide‐based initiating system. Chain‐extension experiments proved the living nature of the polymers. The presence of both extra halide ions and the monomer was necessary to take the CuX–PMDETA complex into solution. It was suggested that the soluble Cu(I) complex was formed with one PMDETA molecule acting as a monodentate ligand and with two halide ions and one acrylamide molecule occupying the other three coordination sites. Some support for the involvement of all three ligands (X^?, PMDETA, and acrylamide) in the complex formation was obtained from ultraviolet–visible spectroscopy studies. The better ATRP with the PMDETA ligand was attributed to the better stability and lesser hydrolysis of the 1:1 Cu⁺²/PMDETA complex with respect the corresponding bipyridine complex. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2483–2494, 2004     

Polyelectrolyte complexes. VII. Complex nanoparticles based on poly(sodium 2‐acrylamido‐2‐methylpropanesulfonate) tailored by the titrant addition rate

Nonstoichiometric interpolyelectrolyte complexes (IPECs) as colloidal dispersions have been widely used for the past decade as reactive materials for flocculation and surface modification. In this context, some new aspects of the preparation and properties of IPEC nanoparticles based on NaPAMPS, in salt‐free aqueous solutions, are reported in this article. IPEC dispersions with different characteristics, z‐averaged particle sizes, polydispersity indices, and colloidal stabilities were tailored by the addition rate of the titrant, a less investigated factor in the synthesis of IPECs as nanoparticles. Poly(sodium 2‐acrylamido‐2‐methylpropanesulfonate) (NaPAMPS) and two polycations bearing positive charges in the backbone, poly(diallyldimethylammonium chloride) and a polycation containing 95 mol % N,N‐dimethyl‐2‐hydroxypropyleneammonium chloride units, were used for this purpose. The complex nanoparticle characteristics and storage stability were monitored via the optical density at 500 nm and dynamic light scattering. IPEC nanoparticles with z‐averaged particle sizes of 100–250 nm resulted from the same polyion pair and the same polyion concentrations when the addition rate of the titrant, either the polyanion or polycation, varied within the range of 0.1–1.5 mL/mL of the starting polyion × h. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5244–5252, 2004     

Synthesis of end‐functionalized AB copolymers. II. Synthesis and characterization of carboxyl‐terminated poly(ethylene glycol)–poly(amino acid) block copolymers

AB block copolymers composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic poly(amino acid) with a carboxyl group at the end of PEG were synthesized with α‐carboxylic sodium‐ω‐amino‐PEG as a macroinitiator for the ring‐opening polymerization of N‐carboxy anhydride. Characterizations by ¹H NMR, IR, and gel permeation chromatography were carried out to confirm that the diblock copolymers were formed. In aqueous media this copolymer formed self‐associated polymer micelles that have a carboxyl group on the surface. The carboxyl groups located at the outer shell of the polymeric micelle were expected to combine with ligands to target specific cell populations. The diameter of the polymer micelles was in the range of 30–80 nm. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3527–3536, 2004     

Hollow latex particles as submicrometer reactors for polymerization in confined geometries

A method was developed for free‐radical polymerization in the confines of a hollow latex particle. Hollow particles were prepared via the dynamic swelling method from polystyrene seed and divinylbenzene and had hollows of 500–1000 nm. So that these hollow poly(divinylbenzene) particles could function as submicrometer reactors, the particles were filled with a monomer (N‐isopropylacrylamide) via the dispersion of the dried particles in the molten monomer. The monomer that was not contained in the hollows was removed by washing and gentle abrasion. Free‐radical polymerization was then initiated by γ radiolysis in the solid state. Transmission electron microscopy showed that poly(N‐isopropylacrylamide) formed in the hollow interior of the particles, which functioned as submicrometer reactors. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5706–5713, 2004     

Atom transfer radical polymerization of methyl methacrylate at ambient temperature using soluble Cu(I) complex catalysts formed with mixed ligands of multidentate amines and halide ions

An Erratum has been published for this article in J Polym Sci Part A: Polym Chem (2004) 42(19) 5030 . The addition of soluble quaternaryammonium halides (QX) in catalytic amounts takes into solution CuX/pentamethyldiethylenetriamine (PMDETA) complex (X = Cl, Br) in methyl methacrylate (MMA). The soluble catalyst complex provided much better control of the polymerization of MMA at ambient temperature than did the insoluble catalyst formed in the absence of QX, with CuCl/PMDETA/Aliquat® 336 (AQCl) proving to be superior to the CuBr/PMDETA/Bu₄NBr catalyst system. The effect was independent of the size of the quaternaryammonium ion. Also, the presence of Cl in the catalyst–QX combination either as CuCl or as QCl was enough to give much better control than that provided by a wholly Br‐based system. Among the various initiators used, that is, ethyl 2‐bromoisobutyrate (EBiB), methyl 2‐bromopropionate (MBP), 1‐phenylethyl bromide (PEBr), and p‐toluenesulfonyl chloride (pTsCl), only EBiB gave a satisfactory result. With MBP and PEBr the initiation was slower than the propagation, whereas with pTsCl the initiation was very fast, so that instantaneous termination occurred. The living nature of the polymers was shown by block copolymer preparation. It has been suggested that some of the added halide ions entered into the coordination spheres of Cu(I) and Cu(II), leading to their improved solubility and stronger deactivation by the Cu(II) complex. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4132–4142, 2004     

Solid polymer electrolytes X: Preparation and characterizations of polyether–siloxane,organic–inorganic,hybrid nanocomposites complexed with lithium perchlorate

Organic–inorganic hybrid nanocomposites of poly(ethylene glycol)/siloxane were obtained via the sol–gel approach. In these composites, nanometric siloxane heterogeneity was embedded into a polymer matrix with a covalent bond at the interfaces. The ²⁹Si magic-angle spinning (MAS) spectrum exhibited a high degree of condensation through the relative abundance of T⁰ [RSi(OR)₃], T¹ [RSi(OR)₂(OSi)], T² [RSi(OR)(OSi)₂], and T³ [RSi(OSi)₃] silicone nuclei. The effect of lithium salt concentration on ionic interaction, conductivity, and thermal properties of these composite electrolytes were investigated by Fourier transform infrared spectroscopy, DSC, thermogravimetric analysis, alternating current impedance, and solid-state ⁷Li MAS NMR measurements. These observations indicated that the different types of complexes by the interactions of Li⁺ and ClO ions are formed within a hybrid host, and the formation of transient crosslinks between Li⁺ ions and the ether oxygens results in an increased glass-transition temperature of the polyether segment and decomposed rate of composite electrolyte. ⁷Li MAS NMR measurements revealed the changes in line shape of lithium resonances with different LiClO₄ contents, suggesting that a significant degree of ionic association is present in the polymer-salt complexes. The behavior of ion transport in these composite electrolytes was correlated with the interactions between ions and polymer host. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 1928–1937, 2004     

LC-DAD-ESI-MS Characterization of Carbohydrates Using a New Labeling Reagent

A sensitive and selective liquid chromatographic tandem mass spectrometric (LC–MS–MS) method was developed for simultaneous identification and quantification of tamsulosin and dutasteride in human plasma, which was well applied to clinical study. The method was based on liquid–liquid extraction, followed by an LC procedure with a Gemini C-18, 50 mm × 2.0 mm (3 μm) column and using methanol:ammonium formate (97:3, v/v) as the mobile phase. Protonated ions formed by a turbo ionspray in positive mode were used to detect analytes and internal standard. MS–MS detection was by monitoring the fragmentation of 409.1 → 228.1 (m/z) for tamsulosin, 529.3 → 461.3 (m/z) for dutasteride and 373.2 → 305.3 (m/z) for finasteride (IS) on a triple quadrupole mass spectrometer. The lower limit of quantification for both tamsulosin and dutasteride was 1 ng mL⁻¹. The proposed method enables the unambiguous identification and quantification of tamsulosin and dutasteride for clinical drug monitoring.

     

Pulse radiolysis studies of poly(methyl methacrylate) containing pyrene

A pulse radiolysis study of poly(methyl methacrylate) in the presence of pyrene has been carried out in the temperature range 100–295 K. The concentration of pyrene was changed from 10⁻³ to 10⁻¹ mol dm⁻³. The absorption/emission spectra and kinetics of solute excited states and solute radical ions were investigated. It was found that pyrene excited states were formed as a result of their radical ion recombination in a time scale up to seconds. The decay of solute radical ions was influenced by photobleaching and can be described by a time-dependent rate constant. The activation energy of Py ions decay was temperature dependent and was equal to 35.7 and 1.2 kJ/mol for temperatures >T_γ and <T_γ, respectively, where T_γ ∼ 175 K represented the transition temperature responsible for γ-relaxation. The reaction mechanism was proposed. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1209–1215, 1998     

Characteristic ion clusters as determinants for the identification of pyrrolizidine alkaloid N‐oxides in pyrrolizidine alkaloid–containing natural products using HPLC–MS analysis

Pyrrolizidine alkaloid (PA)–containing plants are widely distributed in the world. PAs are hepatotoxic, affecting livestock and humans. PA N‐oxides are often present together with PAs in plants and also exhibit hepatotoxicity but with less potency. HPLC–MS is generally used to analyze PA‐containing herbs, although PA references are unavailable in most cases. However, to date, without reference standards, HPLC–MS methodology cannot distinguish PA N‐oxides from PAs because they both produce the same characteristic ions in mass spectra. In the present study, the mass spectra of 10 PA N‐oxides and the corresponding PAs were systemically investigated using HPLC–MS to define the characteristic mass fragment ions specific to PAs and PA N‐oxides. Mass spectra of toxic retronecine‐type PA N‐oxides exhibited two characteristic ion clusters at m/z 118–120 and 136–138. These ion clusters were produced by three unique fragmentation pathways of PA N‐oxides and were not found in their corresponding PAs. Similarly, the nontoxic platynecine‐type PA N‐oxides also fragmented via three similar pathways to form two characteristic ion clusters at m/z 120–122 and 138–140. Further application of using these characteristic ion clusters allowed successful and rapid identification of PAs and PA N‐oxides in two PA‐containing herbal plants. Our results demonstrated, for the first time, that these characteristic ion clusters are unique determinants to discriminate PA N‐oxides from PAs even without the availability of reference samples. Our findings provide a novel and specific method to differentiate PA N‐oxides from PAs in PA‐containing natural products, which is crucial for the assessment of their intoxication. Copyright © 2012 John Wiley & Sons, Ltd.     

Site of alkylation of N-methyl- and N-ethylaniline in the gas phase: a tandem mass spectrometric study

N-Methylaniline (NMA) was ethylated and N-ethylaniline (NEA) was methylated under chemical ionization conditions using C₂H₅I and CH₃I, respectively, as reagent gases. The structures of the resulting m/z 136 adduct ions have been probed using metastable ion and collision-induced dissociation (CID) methods. From the similarity of the spectra obtained and from the presence of structure-diagnostic ions at m/z 59 (CH₃NHC₂H₅^+•) and m/z 44 (CH₃NHCH₂⁺), it is concluded that predominantly N-alkylation occurs in both systems. This interpretation was aided by the use of C₂D₅I and CD₃I as reagents. Adduct ions of m/z 136 were also formed by ethylation of the isomeric toluidines and by methylation of the ring-ethylanilines. The resulting CID mass spectra were distinctly different from those obtained for the m/z 136 ions obtained by alkylation of NMA and NEA. Protonation of N-ethyl-N-methylaniline using CH₃C(O)CH₃ as Brønsted acid reagent produced an m/z 136 species whose CID mass spectrum also featured intense ion signals at m/z 59 and 44. This observation led to the conclusion that protonation with acetone as reagent results, in this case, in dominant N-protonation. However, the CID mass spectrum of the m/z 136 ion formed when CH₃OH was the protonating agent featured a weak signal at m/z 44 and no signal at m/z 59. Hence it was concluded that the latter m/z 136 ion contains a larger contribution from the ring-protonated adduct. Copyright © 2004 John Wiley & Sons, Ltd.     

Concentration controlled multilevel self‐assembly of 3‐armed poly(ethylene glycol)‐b‐poly(ε‐caprolactone) block copolymers investigated by AFM

Concentration dependent morphology of 3‐armed poly(ethylene glycol)‐b‐poly(ε‐caprolactone) copolymer aggregates in aqueous system was investigated by atomic force microscopy (AFM). The AFM results show that, at a low concentration, 4 × 10^?5 g/mL, spherical micelles occur, and unmicellized molecules are not distributed homogeneously in the copolymer aqueous solution. Unequal outspread clusters composed of wormlike aggregates are formed at a moderate copolymer concentration, 4 × 10^?4 g/mL, those wormlike aggregates are orderly packed in the clusters. At a high concentration of 0.05 g/mL, the copolymer aqueous system is indeed a gel at room temperature, outspread clusters of wormlike aggregates join together to forma network structure. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 1412–1418, 2008     

Synthesis of π‐conjugated oligomer that can form metallo polymers

An oligo(p‐phenylene vinylene) that contains terpyridine ligands has been synthesized. Upon addition of metal ions, a π‐conjugated metallo polymer is formed in which the well‐defined character of oligomers and the material properties of polymers are combined. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4020–4023, 2002     

Reaction of oligoalcohols with diepoxides: An easy,one‐pot way to star‐shaped,multibranched polymers. II. Poly(ethylene oxide) stars—synthesis and analysis by size exclusion chromatography triple‐detection method

An Erratum has been published for this article in Journal of Polymer Science Part A: Polymer Chemistry (2004) 42(10) 2575‐2576 Starlike, highly branched (A_xB_yA_z) macromolecules having from a few to 100 arms and molar masses up to 10⁵ were prepared in three stages with the one‐pot, arms‐core‐arms method (B_y stands for y molcules of former diepoxides introduced into the core). Oligoalcohols, at least partially converted into their alcoholate counterpart states, reacted with diepoxy compounds giving star‐shaped, highly branched macromolecules. With the properly chosen conditions, complete conversion of both starting components was achieved. In this article homostars built with the first and second generation of poly(ethylene oxide) arms (A_x and A_z, respectively) are described. The number of arms (f) was determined either by direct measurements of the number‐average molcular weight (M_n) of the first and second stars (M_n of arms A_x and A_z is known) or by calculating f from branching indices g and g′ determined from the radius of gyration and the limited viscosity number measured with size exclusion chromatography (SEC) triple detection with TriSEC software. For a few samples, M_n was measured with high‐speed membrane osmometry. The progress of the stars' formation was monitored by ¹H NMR, SEC, and matrix‐assisted laser desorption/ionization time‐of‐flight methods. Functionalization of the ? OH end groups in the second generation of arms was observed by ¹H and/or ³¹P NMR. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1576–1598, 2004     

Poly(N‐phenylmaleimide‐co‐acrylic acid)–copper(II) and poly(N‐phenylmaleimide‐co‐acrylic acid)–cobalt(II) complexes: Synthesis,characterization, and thermal behavior

The free‐radical copolymerization of N‐phenylmaleimide (N‐PhMI) with acrylic acid was studied in the range of 25–75 mol % in the feed. The interactions of these copolymers with Cu(II) and Co(II) ions were investigated as a function of the pH and copolymer composition by the use of the ultrafiltration technique. The maximum retention capacity of the copolymers for Co(II) and Cu(II) ions varied from 200 to 250 mg/g and from 210 to 300 mg/g, respectively. The copolymers and polymer–metal complexes of divalent transition‐metal ions were characterized by elemental analysis, Fourier transform infrared, ¹H NMR spectroscopy, and cyclic voltammetry. The thermal behavior was investigated with differential scanning calorimetry (DSC) and thermogravimetry (TG). The TG and DSC measurements showed an increase in the glass‐transition temperature (T_g) and the thermal stability with an increase in the N‐PhMI concentration in the copolymers. T_g of poly(N‐PhMI‐co‐AA) with copolymer composition 46.5:53.5 mol % was found at 251 °C, and it decreased when the complexes of Co(II) and Cu(II) at pHs 3–7 were formed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4933–4941, 2005     

Mass spectrometry of diaziridines: 1—Rearrangements of the molecular ion of 1-benzyl-3,3-dimethyldiaziridine and identification of some daughter ions using collisional activation

Intense rearrangement processes involving migrations of hydrogen atoms and the phenyl group were observed in the electron impact induced fragmentation of 1-benzyl-3,3-dimethyldiaziridine. The following ions are observed: (i) m/z 146: a two-step fragmentation involving hydrogen transfer followed by loss of NH₂; (ii) m/z 119: C—N¹ bond fission followed by a 1–4 phenyl shift and loss of CH₃N₂; (iii) m/z 106: a process involving reciprocal hydrogen migration between the methyl and benzylic methylene groups; (iv) m/z 58: hydrogen transfer from benzylic methylene and subsequent loss of PhCHN. The origin of these ions has been confirmed by measurements of metastable transitions in 1-benzyl-3,3-dimethyldiaziridine, and on specifically deuterated and substituted diaziridines. The structure of the ions at m/z 119 and m/z 106 has been deduced by means of collisional activation spectrometry.     

Temperature‐dependent fluorescence from pyrenyl‐modified polyethylene films. A comparison of attachment methods and morphology changes by irradiation with eV‐range photons and bombardment with MeV‐range positive ions

1‐Pyrenyl groups were attached covalently to three polyethylene ( Py–PE ) films with different crystallinities by irradiating (eV‐range photons–UV‐photons) or by bombarding (MeV‐range ions–protons and alpha particles) pyrene‐doped PE films ( Py/PE ). Onset temperatures of relaxation processes (T_x) of the Py–PE were approximated from (1) Arrhenius‐type plots of the normalized integrated intensities of the films and (2) the temperature dependence of the full‐width half‐maximum (FWHM) films and the position of the 0–0 fluorescence band. DSC thermograms of the native and irradiated or bombarded films were also compared to independently assess the morphological changes. The onset temperatures T_x in lower crystallinity Py–PE films were more difficult to locate when prepared by bombardment with high doses than with low doses of photons or ions or by irradiation. The ease of locating the T_x in higher crystallinity Py–PE films was independent of dose, suggesting little change in the mobility in the vicinity of pyrenyl probes. Fluorescence from Py–PE bombarded with alpha particles indicated the presence of both singly‐ and doubly‐attached pyrenyl groups. The singly‐attached pyrenyl groups were less sensitive than the doubly attached to the T_x. Py–PE films were more sensitive luminescence reporters of T_γ segmental motions than were 9‐anthryl groups covalently attached to the same polymers. We also discuss possible reasons why the values of the activation energies for the relaxation processes, as calculated from the Arrhenius plots, were much smaller than those based on the dynamic mechanical methods. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2957–2970, 2004     

Atom transfer radical polymerization initiated by N‐bromosuccinimide

N‐Bromosuccinimide (NBS) was used as the initiator in the atom transfer radical polymerizations of styrene (St) and methyl methacrylate (MMA). The NBS/CuBr/bipyridine (bpy) system shows good controllability for both polymerizations and yields polymers with polydispersity indexes ranging from 1.18 to 1.25 for St and 1.14 to 1.41 for MMA, depending on the conditions used. The end‐group analysis of poly(MMA) and polystyrene indicated the polymerization is initiated by the succinimidyl radicals formed from the redox reaction of NBS with CuBr/bpy. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5811–5816, 2004     

Solid‐state amidization and imidization reactions in vapor‐deposited poly(amic acid)

The condensation polymerization of 4,4′‐oxydianiline with pyromellitic dianhydride for the formation of poly(amic acid) and the subsequent imidization for the formation of polyimides were investigated for films prepared with vapor‐deposition polymerization techniques. Fourier transform infrared spectroscopy, thermal analysis, and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry of films at different temperatures indicated that additional solid‐state polymerization occurred before imidization. The experiments revealed that, upon vapor deposition, poly(amic acid) oligomers formed that had a number‐average molecular weight of about 1500 Da. Between 100–130 °C, these chains underwent an additional condensation reaction and formed slightly higher molecular weight oligomers. Calorimetry measurements showed that this reaction was exothermic [enthalpy of reaction (ΔH) ～ ?30 J/g] and had an activation energy of about 120 kJ/mol. The experimental ΔH values were compared with results from ab initio molecular modeling calculations to estimate the number of amide groups formed. At higher temperatures (150–300 °C), the imidization of amide linkages occurred as an endothermic reaction (ΔH ～ +120 J/g) with an activation energy of about 130 kJ/mol. The solid‐state kinetics depended on the reaction conversion as well as the processing conditions used to deposit the films. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5999–6010, 2004     

Ring‐opening polymerization of ε‐caprolactone and L‐lactide from silica nanoparticles surface

Coating of silica nanoparticles by biocompatible and biodegradable polymers of ε‐caprolactone and L ‐lactide was performed in situ by ring‐opening polymerization of the cyclic monomers with aluminum, yttrium, and tin alkoxides as catalysts. Hydroxyl groups were introduced on the silica surface by grafting of a prehydrolyzed 3‐glycidoxypropyl trimethoxysilane to initiate a catalytic polymerization in the presence of metal alkoxides. In this manner, free polymer chains were formed to grafted ones, and the graft density was controlled by the nature of the metal and the alcohol‐to‐metal ratio. The grafting reaction was extensively characterized by spectroscopic techniques and quantified. Nanocomposites containing up to 96% of polymer were obtained by this technique. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 1976–1984, 2004