Ag nanoparticle-embedded one-dimensional β-CD/PVP composite nanofibers prepared via electrospinning for use in antibacterial material

Ag nanoparticle-embedded one-dimensional β-CD (β-cyclodextrin)/PVP composite nanofibers were prepared using a one-step electrospinning technique. Ag nanoparticles were obtained in the AgNO₃/β-CD/DMF solution, in which silver nitrate been introduced as the precursor, DMF as solvent, β-CD as reducing and capping agent. After electrospinning of the composite solution at room temperature, the β-CD/PVP nanofibers containing Ag nanoparticles were obtained. The electrospun composite solution containning Ag nsnopsrticles were confirmed by UV-visible absorption spectra; the resulting composite nanofibers were characterized by scanning electron microscopy , transmission electron microscopy, and X-ray diffraction. Ag-β-CD/PVP nanofiber exhibits good antibacterial property for Escherichia coli and Staphylococcus aureus. Consequently, we propose that these Ag nanoparticle-embedded 1D-nanostructures prepared via electrospinning may be used as antibacterial material.     

Preparation of Polymer Nanofibers Containing Silver Nanoparticles by Using Poly(N‐vinylpyrrolidone)

Summary: Poly(N‐vinylpyrrolidone) (PVP) was used in two methods to prepare polymer nanofibers containing Ag nanoparticles. The first method involved electrospinning the PVP nanofibers containing Ag nanoparticles directly from the PVP solutions containing the Ag nanoparticles. N,N‐Dimethylformamide was used as a solvent for the PVP as well as a reducing agent for the Ag⁺ ions in the PVP solutions. In the second method, poly(vinyl alcohol) (PVA) aqueous solutions were electrospun with 5 wt.‐% of the PVP containing Ag nanoparticles. The Ag nanoparticles were evenly distributed in the PVA nanofibers. PVP containing Ag nanoparticles could be used to introduce Ag nanoparticles to other polymer nanofibers that are miscible with PVP.

TEM image of a PVA nanofiber electrospun with 5 wt.‐% of the PVP containing Ag nanoparticles.     

Aligned and molecularly oriented semihollow ultrafine polymer fiber yarns by a facile method

In this work, aligned and molecularly oriented bone‐like PLLA semihollow fiber yarns were manufactured continuously from an optimized homogeneous polymer‐solvent‐nonsolvent system [PLLA, CH₂Cl₂, and dimethyl formamide (DMF)] by a single capillary electrospinning via self‐bundling technique. Here, it should be emphasized that the self‐bundling electrospinning technique, a very facile electrospinning technique with a grounded needle (which is to induce the self‐bundling of polymer nanofibers at the beginning of electrospinning process), is used for the alignment and molecular orientation of the polymer fiber, and the take‐up speed of the rotating drum for the electrospun fiber yarn collection is very low (0.5 m/s). PLLA can be dissolved in DMF and CH₂Cl₂ mixed solvent with different ratios. By varying the ratios of mixed solvent system, PLLA electrospun semihollow fiber with the porous inner structure and compact shell wall could be formed, the thickness of the shell and the size of inner pores could be adjusted. The results of polarized FTIR and wide angle X‐ray diffraction investigations verified that as‐prepared PLLA semihollow fiber yarns were well‐aligned and molecularly oriented. Both the formation mechanism of semihollow fibers with core‐shell structure and the orientation mechanism of polymer chains within the polymer fibers were all discussed. The as‐prepared self‐bundling electrospun PLLA fiber yarns possessed enhanced mechanical performance compared with the corresponding conventional electrospun PLLA fibrous nonwoven membranes. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1118–1125, 2010     

Poly(methyl methacrylate)/silica nanocomposite fibers by electrospinning

Uniform poly(methyl methacrylate) (PMMA)/silica nanocomposite fibers containing up to 20 wt % silica were prepared by electrospinning. The electrospun solutions were prepared by mixing a solution of PMMA in dimethyl formamide (DMF) with colloidal silica in methyl ethyl ketone (MEK). The average fiber diameter decreases from 2.49 μm to 1.69 μm when 20 wt % silica is incorporated as a result of considerably increased solution conductivity, although the solution viscosity increases significantly, which should result in opposite effect. Thinner fibers (down to 350 nm) can be obtained by changing DMF/MEK proportion and by the addition of an ammonium salt. Nano‐sized silica particles (10–40 nm) distributes homogeneously in the fibers, as revealed by transmission electron microscopy. Furthermore, the incorporation of silica nanoparticles can change the thermal properties and surface wettability of the fiber mats. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1211–1218, 2009     

Influence of solvents properties on morphology of electrospun polyurethane nanofiber mats

Segmented polyurethane (SPU) nanofiber mats were prepared by electrospinning technique using the combination of four different solvents viz. tetrahydrofuran, N,N′‐dimethyl formamide, N,N′‐dimethyl acetamide, and dimethyl sulfoxide. Morphology of the electrospun nanofibers was examined by field emission scanning electron microscope. Experimental results revealed that the morphologies of polyurethane nanofiber mats have been changed significantly with the solvent selection for the electrospinning. It was observed that the diameters and morphology of the SPU nanofibers were influenced greatly by the use of combination of solvents. The uniform polyurethane nanofibers without beads or curls could be prepared by electrospinning through the selection of combination of good conductive and good volatile solvent viz. 7.5 wt/v% of SPU in N,N′‐dimethyl formamide/tetrahydrofuran (30 : 70 v/v) solutions at 20 kV applied voltages and volume flow rate of 1 ml/min. On the basis of the results obtained from this investigation, it has been established that solvent selection is one of the driving factors for controlling the morphology of the polyurethane electrospun nanofiber mats. The well‐controlled morphology of electrospun polyurethane nanofiber mats could be useful for many potential industrial applications such as in biomedical, smart textiles, nanofiltration, and sensors. Copyright © 2013 John Wiley & Sons, Ltd.     

Mass preparation of nanofibers by high pressure air‐jet split electrospinning: Effect of electric field

A novel electrospinning method using airflow, namely high pressure air‐jet split electrospinning, was proposed to fabricate polymer nanofibers with ultrahigh production rate. 7 wt % polyacrylonitrile spinning solution with a 0.157 Pa s viscosity was divided into micron size droplets by the filter screen in the front of the nozzle, and then these droplets were divided and split through high pressure airflow, which were drafted into nanofibers directly in the electric field and airflow field. In this study, the electric field distributions with different positive electrodes were simulated and their effect on fiber formation was investigated. The results show that electric field distribution and its intensity depended on electrodes area, a broader electric field distribution with a stronger intensity would bring about a larger cone angle of spraying jet region, at the same time, the contrast in the spray region enhanced. When the whole nozzle was charged, thinner fibers with about 170 nm could be prepared and the fiber production was 75.6 g/h. Compared with the conventional needle electrospinning, the throughput of nanofibers could be improved by thousands of times based on this novel electrospinning method. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 993–1001     

Electrospun Hybrid Nanofibers Based on Chitosan or N‐Carboxyethylchitosan and Silver Nanoparticles

Hybrid nanofibers from chitosan or N‐carboxyethylchitosan (CECh) and silver nanoparticles (AgNPs) were prepared by electrospinning using HCOOH as a solvent. AgNPs were synthesized in situ in the spinning solution. HCOOH slowed down the cross‐linking of the polysaccharides with GA enabling the reactive electrospinning in the presence of poly(ethylene oxide) (PEO). EDX analyses showed that AgNPs are uniformly dispersed in the nanofibers. Since AgNPs hampered the cross‐linking of chitosan and CECh with GA in the hybrid fibers, the imparting of water insolubility to the fibers was achieved at a second stage using GA vapors. The surface of chitosan/PEO/AgNPs nanofibers was enriched in chitosan and 15 wt.‐% of the incorporated AgNPs were on the fiber surface as evidenced by XPS.

     

Polymer entanglement loss in extensional flow: Evidence from electrospun short nanofibers

High strain rate extensional flow of a semidilute polymer solution can result in fragmentation caused by polymer entanglement loss, evidenced by appearance of short nanofibers during electrospinning. The typically desired outcome of electrospinning is long continuous fibers or beads, but, under certain material and process conditions, short nanofibers can be obtained, a morphology that has scarcely been studied. Here we study the conditions that lead to the creation of short nanofibers, and find a distinct parametric space in which they are likely to appear, requiring a combination of low entanglement of the polymer chains and high strain rate of the electrospinning jet. Measurements of the length and diameter of short nanofibers, electrospun from PMMA dissolved in a blend of CHCl₃ and DMF, confirm the theoretical prediction that the fragmentation of the jet into short fibers is brought about by elastic stretching and loss of entanglement of the polymer network. The ability to tune nanofiber length, diameter and nanostructure, by modifying variables such as the molar mass, concentration, solvent quality, electric field intensity, and flow rate, can be exploited for improving their mechanical and thermodynamic properties, leading to novel applications in engineering and life sciences. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2013 , 51, 1377–1391     

Cellulose/chitosan hybrid nanofibers from electrospinning of their ester derivatives

A facile approach has been established to generate cellulose/chitosan hybrid nanofibers with full range of compositions by electrospinning of their ester derivatives, cellulose acetate (CA) and dibutyryl chitin (DBC), followed by alkaline hydrolysis to cellulose (Cell) and chitosan (CS). DBC was synthesized by acid-catalyzed acylation of chitin (CHI) with butyric anhydride and the newly formed butyl groups on C3 and C6 were confirmed by FT-IR and ¹HNMR. DBC had robust solubility in acetone, DMAc, DMF, ethanol, and acetic acid, all except ethanol were also solvents for CA, allowing mixing of these ester derivatives. Fiber formation by electrospinning of either DBC or CA alone and together in these common solvents and their mixtures were studied. The 1/1 acetone/acetic acid was found to be the optimal solvent system to generate fibers from either DBC or CA as well as their mixtures at all CA/DBC ratios, resulting in hybrid fibers with diameters ranging from 30 to 350 nm. DBC and CA were well mixed and showed no phase separate in the hybrid fibers. Alkaline hydrolysis (NaOH) of the equal mass CA/DBC nanofibers regenerated Cell and CHI readily via O-deacylation, then proceeded to further deacetylate CHI to CS via N-deacetylation at higher alkaline concentrations and/or temperatures. Under conditions studied, hydrolysis with 5N NaOH at 100 °C for 3 h was optimal to regenerate cellulose/chitosan hybrid nanofibers.     

Morphology study of Nafion membranes prepared by solutions casting

The structures of Nafion membranes prepared by solutions casting from low aliphatic alcohols/water mixture solvents and N,N′‐dimethyl formamide (DMF) solvent were investigated using differential scanning calorimeter and small angle X‐ray scattering. The aggregation behavior of Nafion molecules in the casting solutions was also investigated using dynamic light scattering. We show that the morphology of membranes was strongly influenced by the conformations of Nafion molecules in the solutions. In aliphatic alcohol/water mixture solvents, which have a worse compatibility with Nafion backbones, the Nafion molecules aggregate and form fringed rod‐like structures. These primary rod‐like structures then aggregate again through fringed side chains to form secondary ionic aggregations. In DMF solvent, owing to its better compatibility with Nafion backbones, less Nafion molecules aggregate. The high degree of Nafion molecular aggregations in aliphatic alcohol/water mixture solvents leads to a high degree of hydrophobic and hydrophilic phase separation for membranes prepared by casting from Nafion/aliphatic alcohol/water solutions. However, the lower degree of molecular aggregations in DMF solvent results in a lower degree of hydrophobic and hydrophilic phase separation for membranes prepared by casting from Nafion/DMF solution. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3044–3057, 2005     

Fluorescent PMMA/MEH‐PPV electrospun nanofibers: Investigation of morphology,solvent, and surfactant effect

Electrospinning is a powerful technique to produce nanofibers of tunable diameter and morphology for medicine and biotechnological applications. By doping electrospun nanofibers with inorganic and organic compounds, new functionalities can be provided for technological applications. Herein, we report a study on the morphology and optical properties of electrospun nanofibers based on the conjugated polymer poly[2‐methoxy‐5‐(2‐ethylhexyloxy)‐1,4‐phenylenevinylene] (MEH‐PPV) and poly(methylmethacrylate) (PMMA). Initially, we investigate the influence of the solvent, surfactant, and the polymer concentration on electrospinning of PMMA. After determining the best conditions, 0.1% MEH‐PPV was added to obtain fluorescent nanofibers. The optical characterizations display the successful impregnation of MEH‐PPV into the PMMA fibers without phase separation and the preservation of fluorescent property after fiber electrospinning. The obtained results show the ability of the electrospinning approach to obtain fluorescent PMMA/MEH‐PPV nanofibers with potential for optical devices applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1388–1394     

The preparation and adsorption properties of electrospun aramid nanofibers

The focus of this work is the preparation of aramid nanofibers via electrospinning technology and the study of their adsorption properties. In this article, aramid nanofibers were prepared by electrospinning aramid fibers solution with the addition of lithium chloride (LiCl). It showed a good adsorption capacity when methylene blue (MB) was used as the model target. There were much larger adsorption amounts and faster kinetics of uptaking target species of electrospun aramid nanofibers to MB than that of electrospun polyethersulfone (PES) nanofibers. Compared with activated carbon, aramid nanofibers also have a much faster adsorption rate to MB. Aramid nanofibers were subsequently used to effectively remove endocrine disruptors such as bisphenol A (BPA), phenol (Phe), and p‐hydroquinone (BPhe) from their aqueous solutions. Additionally, molecule imprinted technology enhances aramid nanofibers with much higher adsorption amounts and special adsorption property for endocrine disruptors. These results showed that aramid nanofibers have the potential to be used in environmental applications. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Flat polymer ribbons and other shapes by electrospinning

In addition to round nanofibers, electrospinning a polymer solution can produce thin fibers with a variety of cross‐sectional shapes. Branched fibers, flat ribbons, ribbons with other shapes, and fibers that were split longitudinally from larger fibers were observed. The transverse dimensions of these asymmetric fibers were typically 1 or 2 μm, measured in the widest direction. A correlation of the branches and bends, observed in high‐frame‐rate videography of the electrified jets of polymer solutions from which the ribbons and branched fibers were produced, suggest that these phenomena occur at scales ranging from around 1 mm to 1 μm. The observation of fibers with these cross‐sectional shapes from a number of different kinds of polymers and solvents indicates that fluid mechanical effects, electrical charge carried with the jet, and evaporation of the solvent all contributed to the formation of the fibers. The influence of a skin on the jets of polymer solutions accounts for a number of the observations. The observed shapes can be used as guides for the extension of mathematical or computer‐generated models for the electrospinning process. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2598–2606, 2001     

Electrospinning of ultrahigh‐molecular‐weight polyethylene nanofibers

The electrospinning method has been employed to fabricate ultrafine nanofibers of ultrahigh‐molecular‐weight polyethylene for the first time with a mixture of solvents of different dielectric constants and conductivities. The possibility of producing highly oriented nanofibers from ultrahigh‐molecular‐weight polymers suggests new ways of fabricating ultrastrong, porous, and single‐component nanocomposite fibers with improved properties. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 766–773, 2007     

Polyaniline/poly(methyl methacrylate) coaxial fibers: The fabrication and effects of the solution properties on the morphology of electrospun core fibers

Electrically conductive polyaniline (PANi)/poly(methyl methacrylate) (PMMA) coaxial fibers were prepared through the chemical deposition of PANi onto preformed PMMA fibers via in situ polymerization. PMMA fibers were prepared as core materials via electrospinning. Spectral studies and scanning electron microscopy observations indicated the formation of PANi/PMMA coaxial fibers with a diameter of approximately 290 nm and a PANi layer thickness of approximately 30 nm. The conductivity of the PANi/PMMA coaxial fibers was significantly higher than that of electrospun fibers of PANi/poly(ethylene oxide) blends and blend cast films of the same PANi composition. To reproducibly generate uniform‐core polymer fibers, the organic solution properties that affected the morphology and diameter of the electrospun fibers were investigated. The polymer molecular weight, solution concentration, solvent dielectric constant, and addition of soluble organic salts were strongly correlated to the morphology of the electrospun fiber mat. In particular, the dielectric constants of the solvents substantially influenced both the fiber diameter and bead formation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3934–3942, 2004     

Electrospinning of polystyrene/poly(2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene vinylene) blends

Ultrafine polystyrene (PS)/poly(2‐methoxy‐5‐(2′‐ethylhexyloxy)‐1,4‐phenylene vinylene) (MEH‐PPV) fibers were successfully prepared by electrospinning of PS/MEH‐PPV solutions in chloroform, 1,2‐dichloroethane, and tetrahydrofuran (THF). Three concentrations of the solutions were prepared: 8.5, 16, and 23.5% (w/v), with the compositional weight ratios between PS and MEH‐PPV being 7.5:1, 15:1, and 22.5:1, respectively. Smooth fibers only observed from 23.5% (w/v) PS/MEH‐PPV solution in chloroform. Improvement in the electrospinnability of 8.5% (w/v) PS/MEH‐PPV solution in chloroform was achieved by addition of an organic salt, pyridinium formate (PF), or by addition of a minor solvent with a high dielectric constant value. The average diameters of the as‐spun PS/MEH‐PPV fibers were between 0.30 and 5.11 μm. Last, photoluminescence of 8.5% (w/v) solutions of PS/MEH‐PPV in a mixed solvent system of chloroform and 1,2‐dichloroethane of various volumetric compositions and the resulting as‐spun fibers was investigated and compared. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1881–1891, 2005     

Preparation of electrospun shape memory polyurethane fibers in optimized electrospinning conditions via response surface methodology

Herein, the electrospinning method, as an effective approach, was utilized to fabricate poly (ε‐caprolactone)‐based polyurethane (PCL‐based PU) fibers. PCL was synthesized by ring‐opening polymerization, and characterized by proton nuclear magnetic resonance (¹H NMR) and Fourier‐transform infrared (FTIR) spectroscopies. Afterward, PU was prepared by step‐growth polymerization. The effects of solution concentration and solvent type on fibers' diameter were investigated. Scanning electron microscopy (SEM) images revealed that the optimum solution was N, N‐dimethylformamide(DMF): chloroform with a ratio of 60:40. In addition, results showed that bead‐less nanofibers could be achieved by a concentration of 5 w/v% (polymer to solvent). Various optimum practical parameters, such as applied voltage, feeding rate, and needle‐to‐collector distance, were obtained and compared with the results of response surface methodology (RSM). On the other hand, the mechanical evaluations indicated that the porous structure of scaffolds caused them to possess lower mechanical properties, as well as shape fixity ratios than those of bulk samples.     

Synthesis and mechanical properties of para‐aramid nanofibers

Scalable, bottom‐up chemical synthesis and electrospinning of novel Cl‐substituted poly(para‐phenylene terephthalamide) (PPTA) nanofibers are herein reported. To achieve Cl‐PPTA nanofibers, the chemical reaction between the monomers was precisely controlled, and dissolution of the polymer into solvent was tailored to enable anisotropic solution formation and sufficient entanglement molecular weight. Electrospinning processing parameters were studied to understand their effects on fiber formation and mat morphology and then optimized to yield consistently high quality fibers. Importantly, the control of relative humidity during the fiber formation process was found to be critical, likely because water promotes hydrogen bond formation between the PPTA chains. The fiber and mat morphologies resulting from different combinations of chemistry and spinning conditions were observed using scanning electron microscopy, and observations were used as inputs to the optimization process. Tensile properties of single Cl‐PPTA nanofibers were characterized for the first time using a nanomanipulator mounted inside a scanning electron microscope (SEM), and fiber moduli measuring up to 70 GPa, and strengths exceeding 1 GPa were achieved. Given the excellent mechanical properties measured for the nanofibers, this chemical synthesis procedure and electrospinning protocol appear to be a promising route for producing a new class of nanofibers with ultrahigh strength and stiffness. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 563–573     

Preparation of ultrafine fast-dissolving feruloyl-oleyl-glycerol-loaded polyvinylpyrrolidone fiber mats via electrospinning

Fast-dissolving drug delivery membranes for poorly water-soluble drugs were prepared by electrospinning using feruloyl-oleyl-glycerol (FOG) as a model drug and polyvinylpyrrolidone (PVP) K90 as a polymer matrix in a mixed solvent of chloroform/ethanol (4:1, v/v). Results from Fourier-transform infrared spectroscopy (FT-IR) illustrated good compatibility between FOG and PVP as well as a good distribution of FOG within the fibers. The morphology and diameter of the fibers were influenced by the concentration of PVP and the applied voltage. When the PVP concentration was 5% (w/v) and the applied voltage was 14 kV, uniform and smooth fibers were obtained, with diameter 700-800 nm. Wetting time assays confirmed fast-dissolving properties with the average dissolution time for FOG-loaded PVP fiber membranes being 2.0±1.5 s. These results demonstrate the potential of electrospinning solid dispersions to improve the dissolution profile of poorly water-soluble drugs.     

In situ synthesis of ZnO nanocrystal/PET hybrid nanofibers via electrospinning

Hybrid nanofibers of ZnO precursors/PET were fabricated by electrospinning a nonaqueous poly(ethylene terephthalate) (PET) solution containing zinc acetate dihydrate. Scanning electron microscopy images showed that the as prepared nanofibers had smooth and uniform surfaces, and the diameter was decreased with increasing zinc acetate dihydrate content and reducing PET concentration. After the treatment by a mild process of immersing the fibers in ammonia‐ethanol mixtures (pH ≈ 9–11), the surface of the nanofibers became rough during the formation of ZnO nanocrystals in the fibers. High resolution transmission electron microscopy images showed that the mean particle size became smaller with increasing diameter of the polymer fibers and decreasing content of ZnO. Fourier transform infrared spectra confirmed the ZnO formation in the hybrid nanofibers. X‐ray diffractometry patterns indicated that ZnO had the Wurtzite structure. The formation and growth of ZnO nanocrystals in the nanofiber matrices was also influenced by the various other parameters, that is, the pH value of the reaction solution, the content of zinc acetate dihydrate within the fibers, the reaction time and temperature. Photoluminescence spectra under excitation at 300 nm revealed a broad and intense ultraviolet emission. The UV‐visible diffuse reflectance spectra demonstrated the blue shift in the absorbance curve, which was ascribed to the quantum confinement effects of ZnO nanoparticles in the hybrid materials. These hybrid nanofibers can potentially be used in light emitters, chemical sensors, photo‐catalysts and solar cells. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 49: 1360–1368, 2011