Simultaneous square-wave voltammetric determination of aspartame and cyclamate using a boron-doped diamond electrode

A simple and highly selective electrochemical method was developed for the simultaneous determination of aspartame and cyclamate in dietary products at a boron-doped diamond (BDD) electrode. In square-wave voltammetric (SWV) measurements, the BDD electrode was able to separate the oxidation peak potentials of aspartame and cyclamate present in binary mixtures by about 400 mV. The detection limit for aspartame in the presence of 3.0x10(-4) mol L(-1) cyclamate was 4.7x10(-7) mol L(-1), and the detection limit for cyclamate in the presence of 1.0x10(-4) mol L(-1) aspartame was 4.2x10(-6) mol L(-1). When simultaneously changing the concentration of both aspartame and cyclamate in a 0.5 mol L(-1) sulfuric acid solution, the corresponding detection limits were 3.5x10(-7) and 4.5x10(-6) mol L(-1), respectively. The relative standard deviation (R.S.D.) obtained was 1.3% for the 1.0x10(-4) mol L(-1) aspartame solution (n=5) and 1.1% for the 3.0x10(-3) mol L(-1) cyclamate solution. The proposed method was successfully applied in the determination of aspartame in several dietary products with results similar to those obtained using an HPLC method at 95% confidence level.     

Thermal lens studies of the reaction of iron (II) with 1,10-phenanthroline at the nanogram level

The determination of iron(II) with 1,10-phenanthroline in aqueous solutions was carried out exemplarily by thermal lens spectrometry. The peculiarities of analytical reactions at the nanogram level of reactants can be studied using this method. Under the conditions of the competing reaction of ligand protonation, the overall stability constant for iron(II) chelate with 1,10-phenanthroline was determined at a level of n x 10(-7) mol L(-1), logbeta3 = 21.3+/-0.1. The rates of formation and dissociation of iron(II) tris-(1,10-phenanthrolinate) at a level of n x 10(-8) mol L(-1) were found to be (2.05+/-0.05) x 10(-2) min(-1) and (3.0+/-0.1) x 10(-3) min(-1), respectively. The conditions for the determination of iron(II) with 1,10-phenanthroline by thermal lensing were reconsidered, and ascorbic acid was shown to be the best reducing agent, which provided minimum and reproducible sample pretreatment. Changes in the conditions at the nanogram level improved both the selectivity and sensitivity of determination. The optimum measurement conditions for thermal lensing were determined not only by the absorption of the analyte and reagents, but also by the background absorption of the solvent. The limits of detection and quantification of iron(II) at 488.0 nm (excitation beam power 140 mW) are 1 x 10(-9) and 6 x 10(-9) mol L(-1), respectively; the reproducibility RSD for the range n x 10(-8)-n x 10(-6) mol L(-1) is 2-5%.     

Tris(2,2'-bipyridyl)ruthenium(II)-zirconia-Nafion composite films applied as solid-state electrochemiluminescence detector for capillary electrophoresis

The major goal of this work was to develop a new solid-state electrochemiluminescence (ECL) detector suitable for capillary electrophoresis (CE). The detector was fabricated by coating a sol-gel derived zirconia (ZrO(2))-Nafion composite film on a graphite electrode, then the zirconia-Nafion modified electrode was immersed in tris(2,2'-bipyridyl)ruthenium(II) (Ru(bpy)(3) (2+)) solution to immobilize this active chemiluminescence reagent. The voltammetric and ECL behaviors of the detector were investigated and optimized in tripropylamine solution. The ratio of 53% for zirconia in the zirconia-Nafion composite provided the highest luminescence intensity of immobilized Ru(bpy)(3) (2+). The ECL can maintain its stability very well in the phosphate solution in the period of 5-90 h when the solid-state ECL detector was immersed in the solution all the time. The optimum distance of capillary outlet to the solid-state ECL detector has been found to be ca. 50-80 microm for a 75 microm capillary. The effects of ionic strength and pH of ECL solution on peak height were investigated. The CE with solid-state ECL detector system was successfully used to detect tripropylamine, lidocaine, and proline. The detection limits (S/N = 3) were 5 x 10(-9) mol.L(-1) for tripropylamine, 1 x 10(-8) mol.L(-1) for lidocaine and 5 x 10(-6) mol.L(-1) for proline, and the linear ranges were from 1.0 x 10(-8) to 1.0 x 10(-5) mol.L(-1) for tripropylamine, 5.0 x 10(-7) mol.L(-1) to 1.0 x 10(-5) mol.L(-1) for lidocaine and 1.0 x 10(-5) to 1.0 x 10(-3) mol.L(-1) for proline, respectively.     

A new red-region substrate, tetra-substituted amino aluminium phthalocyanine, for the fluorimetric determination of H2O2 catalyzed by mimetic peroxidases

A new red-region fluorogenic substrate, tetra-substituted amino aluminium pthalocyanine, was developed for the selective determination of H2O2 based on the catalytic effect of mimetic peroxidases, viz., hemin or iron tetrasulfonatophthalocyanine (FeTSPc). Under the optimum conditions, the linearity of the calibration graph for the determination of H2O2 with hemin (or FeTSPc) as the catalyst was in the range from 0.0 to 3.0 x 10(-7) mol L-1 (or from 0.0 to 2.0 x 10(-6) mol L-1). The detection limits were 3.7 x 10(-9) and 4.9 x 10(-9) mol L-1 H2O2, respectively. The relative standard deviation (n = 7) was within 1.5% in the middle of the linear range. The peroxidase activity of the mimetic enzymes hemin and FeTSPc, the effects of some experimental conditions and the influence of foreign substances were investigated. With this substrate, 0.0-7.5 x 10(-8) mol L-1 hemin and 0.0-2.0 x 10(-6) mol L-1 FeTSPc can be determined with an accuracy and precision of about 1.3%. The potential application of the reagent was tested by the determination of H2O2 in rainwater.     

流动注射化学发光抑制法测定抗坏血酸

基于抗坏血酸对Ｌｕｍｉｎｏｌ－ＫＩＯ４－Ｈ２Ｏ２体系化学发光反应的抑制作用,建立了化学发光抑制快速测定抗坏血酸的新方法。该方法线性范围为１．０＊１０＾－７－１．０＊１０＾－５ｍｏｌ／Ｌ,检出限为６．０＊１０＾－８ｍｏｌ／Ｌ,对８．０＊１０＾－７ｍｏｌ／Ｌ抗坏血酸１１次平行测定的相对标准偏差为１．０％。用于维生素Ｃ片剂及注射液中抗坏血酸含量的测定,结果令人满意。     

High-performance liquid chromatography determination of nitrated polycyclic aromatic hydrocarbons by indirect fluorescence detection

A high-performance liquid chromatography (HPLC) method for the analysis of nitrated polcyclic aromatic hydrocarbons (NPAHs) is reported. NPAH mixtures were pre-concentrated using solid-phase extraction and well resolved on a C(18) column. They were detected using an indirect method involving the quenching of the emission from the fluorophores 5,6,7,8-tetrahydronaphthol (5,6,7,8-THN-1-OH), 7-amino-4-methyl coumarin (Coumarin 120, COU-120) and 3-hydroxy-4-(2-hydroxy-4-sulfo-1-naphthylazo)2-naphthalene carboxylic acid (Calcon carboxylic acid, CCA). Linear calibration curves were obtained in the range 1.1 x 10(-9) to 1.1 x 10(-8) mol/L. Using COU 120 as the fluorophore, the detection limit was 2.9 x 10(-10) mol/L for 1-nitronaphthalene and 2.1 x 10(-11) mol/L for 2-nitrofluorene. Recoveries of NPAHs from spiked tap water samples were between 88 and 100%.     

Fluorimetric determination of methylmercury as an ion-association complex with rhodamine B in the presence of iodide

A fluorimetric method for the determination of methylmercury was established. The method was based on the formation of an ionic pair between iodide-methylmercury-rhodamine B in hydrochloric acid, which can be extracted with benzene. The fluorescence emission was measured at lambda(ex)/lambda(em) 575/590 nm, and the experimental variables and possible interference were studied. The linear calibration range was 4 x 10(-8) mol/L to approximately 5 x 10(-7) mol/L with a correlation coefficient of 0.9992. The detection limit was 1 x 10(-8) mol/L. The method was used to determine methylmercury in human hair. The recovery was in the range of 91% to 105% and the relative standard deviation was 2.8%. The results agreed with those obtained by gas chromatography with electron capture detection.     

Fluorimetric determination of peroxynitrite based on an enzymatic reaction.

A novel fluorimetric method for the determination of peroxynitrite (ONOO-) using hemoglobin (Hb) as a catalyst is described. The method employs the reaction of ONOO with thiamine (TM), a colorless, non-fluorescent reagent in a glycine-NaCl-NaOH buffer solution (pH 12.7), to generate a highly fluorescent product, thiochrome (TC). The fluorescent product was monitored by fluorimetry. A linear calibration graph was obtained over an ONOO- concentration range from 4.95 x 10(-7) mol L(-1) to 2.97 x 10(-5) mol L(-1), with a detection limit of 9.78 x 10(-9) mol L(-1) ONOO-. The relative standard deviation at an ONOO- concentration of 2.11 x 10(-6) mol L(-1) was 4.15% (n = 9).     

Chemiluminescence of tryptophan and histidine in Ru(bpy)3(2+)-KMnO4 aqueous solution

Amino acids with different chemical structures have different abilities in terms of increasing the intensity of chemiluminescence (CL) of tris(2,2'-bipyridine)ruthenium(II) [Ru(bpy)3(2+)]. In a flow system, CL caused by the reaction between Ru(bpy)3(3+) and 15 amino acids was observed, but only tryptophan (Trp) and histidine (His) enhanced the intensity obviously, and so the CL of Trp and His and their molecular groups was studied. A calculation of the ionization potentials (IPs) of their N atom indicated that the CL intensities of these compounds depended on their IPs. In addition, the flow system was used for the determination of Trp and His, and the detection limits were 3 x 10(-8) mol L(-1) for His and 2.5 x 10(-9) mol L(-1) for Trp. The calibration curves for the two amino acids were 1.0 x 10(-7) to 5.0 x 10(-3) mol L(-1) for His and 1.0 x 10(-8) to 1.0 x 10(-4) mol L(-1) for Trp. The proposed approach was applied to the determination of His in Ganoderma.     

An unmediated hydrogen peroxide biosensor based on hemoglobin incorporated in a montmorillonite membrane

Hemoglobin was incorporated in a montmorillonite membrane. Electrochemical and spectroscopic studies revealed that the electron transfer reactivity and peroxidase activity of the protein were both enhanced. Nevertheless, its structure was still maintained native-like in the membrane. An unmediated hydrogen peroxide biosensor was accordingly prepared. The calibration plot of this H202 sensor was linear in the range of 1.0 x 10(-6)-6.0 x 10(-4) mol L(-1). The relative standard deviation was 3.1% for six successive determinations at a concentration of 1.0 x 10(-4) mol L(-1). The detection limit was 6.0 x 10(-7) mol L(-1). Possible interferences in real sample analyses are discussed.     

Determination of EDTA species in water by second-derivative square-wave voltammetry using a chitosan-coated glassy carbon electrode.

Based on the adsorption of Fe(EDTA)- on a chitosan-coated glassy carbon electrode, a second-derivative square-wave voltammetry for the determination of the EDTA species in water samples was investigated. The measuring range of EDTA was from 6.0 x 10(-7) to 5.0 x 10(-5) mol/L with a correlation coefficient of 0.998 and a detection limit of 2.8 x 10(-7) mol/L. The relative standard deviation was less than 6.2% (n = 5) and the recovery was in the range of 98-105% for the determination of practical samples. The result was consistent with that from the HPLC method.     

Attomole sensitivity for unlabeled proteins and polypeptides with on-chip capillary electrophoresis and universal detection by interferometric backscatter

A universal detector based on backscatter interferometry has been developed to perform nanoliter volume refractive index measurements for on-chip sodium dodecyl sulfate (SDS) gel based (polyethylene oxide gel) separations and quantification label-free proteins. The on-chip interferometric backscatter detector (OCIBD) system consists of a simple, folded optical train based on the interaction of a laser beam with an etched channel in the shape of half cylinder in a fused-silica plate. The backscattered light from the channel takes on the form of a high-contrast interference pattern that contains information related to the bulk properties of the fluid located within the probe or detection volume of 2.32 x 10(-9) L. Depending on capillary electrophoresis (CE) injection method, the positional changes of the interference pattern extrema (fringes) allow for the quantification of unlabeled proteins at levels ranging from 11 to 310 amol (2.7 x 10(-8)mol/L) with a linear dynamic range of 2.5 decades (egg albumin). Using OCIBD microchannel-based SDS capillary gel electrophoresis (SDS/CGE), separation and detection of five label-free proteins was achieved in less than 100 seconds with detection limits ranging from 0.95 pg (1.1 x 10(-16)mol or 2.5 x 10(-7)mol/L) of calmodulin to 7.0 pg (1.0 x 10(-16)mol or 2.4 x 10(-7)mol/L) for bovine serum albumin (BSA) without signal filtering or active thermal control. This development shows that a universal detector based on backscatter interferometry can be used effectively for on-chip label-free solute analysis.     

Determination of polyphenols by high-performance liquid chromatography with inhibited chemiluminescence detection.

A chemiluminescence reaction detector was developed for the detection of polyphenols separated by HPLC based on the inhibition of chemiluminescence from the luminol-potassium hexacyanoferrate(III) reaction by polyphenols. The separation was carried out on a RP-C18 column at 37 degrees C by using stepwise gradient elutions. The detection limits are in the range of 6.8 x 10(-7)-2.0 x 10(-9) g/ml for catechol, protocatechuic acid, chlorogenic acid, rutin, resorcinol, hydroquinone and p-tert.butylpyrocatechol. The method is sensitive, selective, fast and simple. It has been successfully applied to the determination of chlorogenic acid and rutin in real tobacco samples.     

Flow injection amperometric detection of ascorbic acid using a Prussian Blue film-modified electrode

The PB film-modified electrode was used as an amperometric detector for flow injection analysis of ascorbic acid. The modified electrode detector showed good sensitivity, stability and reproducibility. The calibration curve for ascorbic acid was linear over the concentration range from 5.0x10(-6) to 1.0x10(-3) mol l(-1) with a slope of 19.9 mA mol(-1) per litre and a correlation coefficient of 0.999. The detection limit of this method was 2.49x10(-6) mol l(-1). The relative standard deviation of six replicate injections of 2.5x10(-4) mol l(-1) ascorbic acid was 2.5%. The results obtained for ascorbic acid determination in pharmaceutical products are in good agreement with those obtained by using the procedure involving the reaction between triiodide and ascorbic acid.     

新型三维可调共聚焦激光诱导荧光检测器的研制与评价

共聚焦结构是激光诱导荧光检测器(LIFD)中使用最广泛的光路结构之一,增强光路系统同轴精度和降低系统杂散光是降低仪器基线噪声水平、提高其信噪比(S/N)的两种有效手段。采用精密三维反光镜调节架和模块化设计光路系统,研制了一种高效液相色谱用高精度共聚焦激光诱导荧光检测器,对异硫氰酸荧光素(fluorescein isothiocyanate, FITC)的检出限为1×10~12 mol/L。基线噪声与漂移较改进前降低了一个数量级,分别达到8.0×10~3 mV和1.4×10~3 mV/h,且稳定性好,5×10~9 mol/L FITC样品连续5次进样分析的峰面积和峰高相对标准偏差(RSD)均小于0.5%。进一步用FITC衍生化生物胺对研制的检测器进行评价,检出限(S/N=3)达到0.01～0.02 nmol/L。新研制的LIFD噪声低、稳定性好、灵敏度高,适用于生物、食品和环境样品中痕量物质的分析。     

Amperometric determination of glutathione and cysteine on a Pd-IrO(2) modified electrode with high performance liquid chromatography in rat brain microdialysate

A Pd/IrO(2) co-electrodeposited glassy carbon electrode was prepared and the electrochemical behavior of glutathione (GSH) at this chemically modified electrode (CME) has been studied by cyclic voltammetry (CV). The results indicated that the modified electrode efficiently exhibited electrocatalytic oxidation for GSH with relatively high sensitivity, stability, and long-life. Coupled with high-performance liquid chromatography (HPLC), the Pd/IrO(2) modified electrode was utilized for the electrochemical detection (ECD) of the thiocompounds, glutathione and cysteine (Cys). The peak currents were linear with the substance concentrations in the range of 1.0 x 10(-5) mol L(-1) to 8.0 x 10(-4) mol L(-1) for GSH and 4.0 x 10(-6) mol L(-1) to 2.0 x 10(-4) mol L(-1) for Cys. The detection limits were 2.0 x 10(-6) mol L(-1) for GSH and 5.0 x 10(-7) mol L(-1) for Cys with S/N of 3. The method has been successfully applied to assess the contents of GSH and Cys in rat brain microdialysates.     

Chemiluminescence determination of fluoroquinolones using Fenton system in the presence of terbium(iii) ions

A simple new chemiluminescent, CL, method is described for the determination of fluoroquinolones such as: ciprofloxacin (CF), norfloxacin (NF), and ofloxacin (OF). This method is based on the measurement of terbium(iii) emission. This emission follows an energy transfer to the uncomplexed terbium(iii) ions from the excited products of fluoroquinolone oxidations. Under optimum conditions, calibration graphs were obtained for 2 × 10(-8)-2 × 10(-6) mol L(-1) of NF; 3 × 10(-8)-2 × 10(-6) mol L(-1) of CF and 4 × 10(-7)-5 × 10(-5) mol L(-1) of OF. The detection limits are 7 × 10(-9) mol L(-1) norfloxacin, 1 × 10(-8) mol L(-1) ciprofloxacin and 1.5 × 10(-7) mol L(-1) ofloxacin. The method was successfully applied to the determination of these drugs in pharmaceutical formulations.     

Fluorimetric study of the interaction between human serum albumin and quinolones-terbium complex and its application

A highly sensitive spectrofluorimetric method is proposed for determination of human serum albumin (HSA) and some quinolone drugs. Using quinolones-terbium (Tb3+) complex as a fluorescent probe, in the buffer solution of pH 7.8, HSA can remarkably enhance the fluorescence intensity of the quinolones-Tb3+ complex at 545 nm and the enhanced fluorescence intensity of Tb3+ ion is in proportion to the concentration of HSA and quinolone drugs. Optimum conditions for the determination of HSA were also investigated. The linear ranges and limits of detection are 8.0 x 10(-9) to 8.0 x 10(-8) mol L(-1), 4.20 x 10(-9) mol L(-1) (for HSA); 1.0 x 10(-6) to 4.0 x 10(-6) mol L(-1), 1.87 x 10(-8) mol L(-1) (for norfloxacin) and 1.0 x 10(-7) to 1.0 x 10(-6) mol L(-1), 4.82 x 10(-8) mol L(-1) (for enoxacine), respectively. This method is simple, practical and relatively free interference from coexisting substances, as well as much more sensitive than most of the existing assays.     

Determination of carbamazepine by chemiluminescence detection using chemically prepared tris(2,2'-bipyridine)ruthenium(III) as oxidant.

A new chemiluminescence method for the determination of carbamazepine (CBZ) has been developed. The method is based on the chemiluminescence produced in the reaction of tris(2,2'-bipyridine)ruthenium(III) and CBZ in an acidic medium. The chemiluminescence intensity was enhanced by organic solvents in the reaction system. Under the optimum experimental conditions, the calibration curve was linear over the range 4.0 x 10(-3)-8.6 x 10(-7) mol/L for CBZ. The detection limit (S/N = 3) was 2.5 x 10(-7) mol/L and the relative standard deviation of six replicate measurements was 2.6% for 4.0 x 10(-4) mol/L of CBZ. The possible reaction mechanism were also discussed. The chemiluminescence method was successfully applied to assay the CBZ contents in pharmaceutical tablets.     

Effect of di-2-ethylhexyl sodium sulfosuccinate reversed micelles on the iron-tetrasulfonatophthalocyanine-catalyzed fluorogenic oxidation reaction of L-tyrosine with hydrogen peroxide.

The catalytic behavior of iron tetrasulfonatophthalocyanine (FeTSPc) for the oxidation reaction of L-tyrosine with H2O2 in a di-2-ethylhexyl sodium sulfosuccinate (AOT) reversed-micellar system (AOT/cyclohexane) was studied. It was indicated that the reversed micelles could not only enhance the catalytic activity of FeTSPc, but could also increase the fluorescence intensity of the product. Factors that may influence the catalytic reaction, including the concentration of AOT, the cosolubilized water, temperature and pH, were further examined. The possibility of its analytical application was also tested. Experimental results show that the calibration graphs for the determinations of FeTSPc and H2O2 under optimum conditions are linear over the range of 1.0 x 10-8 - 1.0 x 10(-6) mol L(-1) and 0.0 - 3.0 x 10(-6) mol L(-1), respectively, with detection limits of 1.1 x 10(-9) mol L(-1) and 3.1 x 10(-9) mol L(-1) for FeTSPc and H2O2, respectively.