Low frequency in situ metrology of absorption and dispersion of sound absorbing porous materials based on high power ultrasonic non-linearly demodulated waves

The present work is related to acoustic in situ free-field measurements of sound absorption in porous materials, such as cellular plastic foams, glass-wool or recycled felt materials. The emphasis is given towards fine metrology of absorption in view of potential industrial applications. A powerful ultrasonic array working at 40 kHz is used. It enables to measure absorption acoustical data down to 100 Hz due to the exploitation of the non-linear ultrasonic demodulation phenomenon in air. Fine measurements of acoustic absorption are compared to numerical predictions based on the “equivalent-fluid” model (when the squeleton frame is motionless), and to some measurements performed on a Brüel and Kjaer impedance tube. Dispersion curves are also measured and compared to the numerical predictions for some automotive felt materials which are compressed at various ratios. Data obtained with a dedicated portable instrument are also discussed for the same type of materials and configurations.     

Acoustic wave in a suspension of magnetic nanoparticle with sodium oleate coating

The ultrasonic propagation in the water-based magnetic fluid with doubled layered surfactant shell was studied. The measurements were carried out both in the presence as well as in the absence of the external magnetic field. The thickness of the surfactant shell was evaluated by comparing the mean size of magnetic grain extracted from magnetization curve with the mean hydrodynamic diameter obtained from differential centrifugal sedimentation method. The thickness of surfactant shell was used to estimate volume fraction of the particle aggregates consisted of magnetite grain and surfactant layer. From the ultrasonic velocity measurements in the absence of the applied magnetic field, the adiabatic compressibility of the particle aggregates was determined. In the external magnetic field, the magnetic fluid studied in this article becomes acoustically anisotropic, i.e., velocity and attenuation of the ultrasonic wave depend on the angle between the wave vector and the direction of the magnetic field. The results of the ultrasonic measurements in the external magnetic field were compared with the hydrodynamic theory of Ovchinnikov and Sokolov (velocity) and with the internal chain dynamics model of Shliomis, Mond and Morozov (attenuation).     

Sand/cement ratio evaluation on mortar using neural networks and ultrasonic transmission inspection

The quality and degradation state of building materials can be determined by nondestructive testing (NDT). These materials are composed of a cementitious matrix and particles or fragments of aggregates. Sand/cement ratio (s/c) provides the final material quality; however, the sand content can mask the matrix properties in a nondestructive measurement. Therefore, s/c ratio estimation is needed in nondestructive characterization of cementitious materials. In this study, a methodology to classify the sand content in mortar is presented. The methodology is based on ultrasonic transmission inspection, data reduction, and features extraction by principal components analysis (PCA), and neural network classification. This evaluation is carried out with several mortar samples, which were made while taking into account different cement types and s/c ratios. The estimated s/c ratio is determined by ultrasonic spectral attenuation with three different broadband transducers (0.5, 1, and 2 MHz). Statistical PCA to reduce the dimension of the captured traces has been applied. Feed-forward neural networks (NNs) are trained using principal components (PCs) and their outputs are used to display the estimated s/c ratios in false color images, showing the s/c ratio distribution of the mortar samples.     

On the measurement of frequency-dependent ultrasonic attenuation in strongly heterogeneous materials

This paper deals with the measurement of frequency-dependent ultrasonic attenuation in strongly heterogeneous materials, such as cementitious materials. To improve the measurement of this parameter on this kind of materials, a linear swept–frequency signal is used to drive an emitter transducer to conduct a through-transmission inspection in immersion. To filter out undesirable frequency content, time–frequency filtering and detection process are performed. The use of this method has been compared with two excitation techniques, the broadband and the narrowband pulses. The results obtained using the swept–frequency excitation together with the time–frequency filtering, allows the determination of the attenuation curves with high accuracy over a wide frequency range without the need for complicated equipment, and improves the effective bandwidth by using a unique pair of transducers.     

3D transient multiphase model for keyhole,vapor plume,and weld pool dynamics in laser welding including the ambient pressure effect

The physical process of deep penetration laser welding involves complex, self-consistent multiphase keyhole, metallic vapor plume, and weld pool dynamics. Currently, efforts are still needed to understand these multiphase dynamics. In this paper, a novel 3D transient multiphase model capable of describing a self-consistent keyhole, metallic vapor plume in the keyhole, and weld pool dynamics in deep penetration fiber laser welding is proposed. Major physical factors of the welding process, such as recoil pressure, surface tension, Marangoni shear stress, Fresnel absorptions mechanisms, heat transfer, and fluid flow in weld pool, keyhole free surface evolutions and solid–liquid–vapor three phase transformations are coupling considered. The effect of ambient pressure in laser welding is rigorously treated using an improved recoil pressure model. The predicated weld bead dimensions, transient keyhole instability, weld pool dynamics, and vapor plume dynamics are compared with experimental and literature results, and good agreements are obtained. The predicted results are investigated by not considering the effects of the ambient pressure. It is found that by not considering the effects of ambient pressure, the average keyhole wall temperature is underestimated about 500 K; besides, the average speed of metallic vapor will be significantly overestimated. The ambient pressure is an essential physical factor for a comprehensive understanding the dynamics of deep penetration laser welding.     

Elastic property of multiphase composites with random microstructures

We propose a computational method with no ad hoc empirical parameters to determine the elastic properties of multiphase composites of complex geometries by numerically solving the stress–strain relationships in heterogeneous materials. First the random microstructure of the multiphase composites is reproduced in our model by the random generation-growth method. Then a high-efficiency lattice Boltzmann method is employed to solve the governing equation on the multiphase microstructures. After validated against a few standard solutions for simple geometries, the present method is used to predict the effective elastic properties of real multiphase composites. The comparisons between the predictions and the existing experimental data have shown that the effects of pores/voids in composites are not negligible despite their seemingly tiny amounts. Ignorance of such effects will lead to over-predictions of the effective elastic properties compared with the experimental measurements. When the pores are taken into account and treated as a separate phase, the predicted Young’s modulus, shear modulus and Poisson’s ratio agree well with the available experimental data. The present method provides an alternative tool for analysis, design and optimization of multiphase composite materials.     

Surface states on GaAs(110)

The electronic structure of the (110) surface of GaAs is recalculated using the relaxation geometry recently obtained from analyzing elastic low-energy electron diffraction intensity data and a self-consistent ab initio pseudopotential approach. Better agreement is found for the occupied surface states compared with photoemission data, giving support for the new structural model. The influence of convergence of the plane-wave expansion and relativistic effects on the surface states is also examined.     

Structuring from nanoparticles in oil-based ferrofluids

The effect of magnetic field on the structure formation in an oil-based magnetic fluid with various concentrations of magnetite particles was studied. The evaluation of the experimental data obtained from small-angle X-ray scattering and ultrasonic attenuation indicates the formation of chain-like aggregates composed of magnetite particles. The experimental data obtained from ultrasonic spectroscopy fit well with the recent theoretical model by Shliomis, Mond and Morozov but only for a diluted magnetic fluid. In this model it is assumed that a dimer is the main building block of a B -field-induced chain-like structure, thus the estimation of the nematic order parameter does not depend on the actual length of the structure. The scattering method used reveals information about the aggregated structure size and relative changes in the degree of anisotropy in qualitative terms. The coupling constant l \lambda , concentrations f \phi , average particle size d and its polydispersity s \sigma were initially obtained using the vibrating sample magnetometry and these results were further confirmed by rheometry and scattering methods. Both the particles’ orientational distribution and the nematic order parameter S were inferred from the ultrasonic measurements. The investigation of SAXS patterns reveals the orientation and sizes of aggregated structures under application of different magnetic-field strengths. In addition, the magnetic-field-dependent yield stress was measured, and a relationship between the yield stress and magnetic-field strength up to 0.5T was established.     

Evaluation of the texture of polycrystalline aggregate from ultrasonic measurements

The propagation of ultrasonic waves in a polycrystalline aggregate is considered for a bulk sample with orthorhombic symmetry made of cubic crystals. Use is made of the Jaynes principle of maximum Shannon entropy to show how information about the crystallite orientation distribution function can be derived from ultrasonic velocity measurements. It is shown that such information may be derived from ultrasonic velocity measurements both immediately, and after calculating the effective Young modulus in the respective direction. The results obtained from the ultrasonic velocity measurements are compared with those obtained from neutron diffraction measurements.     

Theoretical examination of ultrasonic pole figures via comparison with the results analyzed by finite element polycrystal model

The ultrasonic wave velocities in a polycrystalline aggregate are sensitively influenced by texture development due to plastic deformation. According to Sayer's model, it is possible to construct ultrasonic pole figures via the crystallite orientation distribution function (CODF), which can be calculated by using ultrasonic wave velocities. In the previous papers, the theoretical modeling to simulate ultrasonic wave velocities propagating in solid materials under plastic deformation has been proposed by the authors and proved to be a good agreement with experimental results. Generally, wave velocities are dependent upon the propagating wave frequency; hence to evaluate texture development via ultrasonic pole figures it is necessary to examine an influence of frequency dependence on the ultrasonic wave velocities. In the present paper, the proposed theoretical modeling is applied to the texture characterization in polycrystalline aggregates of FCC metals under various plastic strain histories via ultrasonic pole figures, and also the frequency dependence is examined by using Granato-Lücke's dislocation strings model. Then the simulated ultrasonic pole figures are compared with the pole figures analyzed by the finite element polycrystal model (FEPM). The good qualitative agreement between both results suggests the sufficient accuracy of our proposed theoretical modeling.     

Cracks and pores – Their roles in the transmission of water confined in cementitious materials

Cement paste is formed through a process called hydration by combining water with a cementitious material. Concrete, the worlds most versatile and most widely used material, can then be obtained when aggregates (sand, gravel, crushed stone) are added to the paste. The quality of hardened concrete is greatly influenced by the water confined in the cementitious materials and how it is transmitted through cracks and pores. Here we demonstrate that the water transport in cracks and capillary pores of hardened cement pastes can be approximately modeled by simple equations. Our findings highlight the significance of arresting the development of cracks in cementitious materials used in repository barriers. We also show that neutron scattering is an advantageous technique for understanding how water transmission is effected by gel pore structures. Defining measurable differences in gel pores may hold a key to prediction of the reduction of water transport through cement barriers.     

Measurement of radon emanation in construction materials

Due to the new proposed Israeli approach for radioactivity in construction materials (IS 5098) issued in 2007, the radon emanation of a construction material, a brick in the form of a box (a rectangular parallelepiped), should be checked when its four faces are insulated in order to achieve the same simulation effect when a concrete block is embedded into a wall. A physical model was developed in order to measure the insulation level (quality) of a building product (bulk concrete, building block, tiles, etc.) when its four sides are insulated by various materials. Under the experimental conditions it was found that the insulation level for bulk concrete was 99.5 ± 0.04% which is in good agreement with the requirement of the new Israeli Standard IS 5098. The influence of aging of concrete materials on radon emanation and the emanation ratio, deduced from measurements of insulated and non-insulated materials, was investigated.     

Acoustic modeling of perforated concrete using the dual porosity theory

Perforated concrete shows nowadays a high potential for many construction and building engineering applications. This work is devoted to the analysis of the acoustic properties of perforated concrete made from arlite lightweight aggregates. Concrete produced from these materials is an environmentally friendly alternative to traditional materials and offers a higher durability, excellent strength-to-weight ratio and low cost. In particular, it is shown that the acoustic behavior of perforated concrete can be modeled using a dual porosity approach based on the knowledge of the non-acoustic properties of the matrix granular material and geometrical data. To this end, various non-perforated and perforated samples were prepared and characterized in an experimental test facility, their acoustic properties being determined through the transfer function impedance tube method. Experimental and estimated results related to the acoustic properties of a number of prepared specimens are presented, showing a good agreement. Results suggest that this approach is suitable for practical design of such materials as part of noise control systems.     

A variational approach for the classical anisotropic Heisenberg model in a crystal field

The variational approach based on the Bogoliubov inequality for the free energy is used to study the three-dimensional anisotropic Heisenberg XXZ model with a crystal field. The magnetization and the phase diagrams are obtained as a function of the parameters of the Hamiltonian. Limiting cases, such as isotropic Heisenberg, XY, and planar rotator models in two and three dimensions, are analyzed and compared to previous results obtained from analytical approximations as well as to those obtained from more reliable approaches such as series expansion and Monte Carlo simulations. A parametric procedure has been used in order to simplify the solutions of the self-consistent coupled equations.     

The quasibound state model for self-consistent characteristics of semiconductor intersubband devices

The quasibound state model (QBSM) for determining the self-consistent conduction band profile and space charge density of semiconductor intersubband devices is presented. This new method is based on the quasibound (QB) state resonances of quantum structures. For heterostructures, the traditional self-consistent energy continuum model (ECM) calculates space charge by integration over the entire energy continuum, weighted by Fermi–Dirac statistics. In the present approach, the continuum of energy states of the heterostructure is accurately represented by a small number of QB states, and the space charge calculations are performed only at these eigen-energies. This approach significantly reduces the computational burden associated with all self-consistent algorithms. Theoretical formulation of QBSM is compared with the traditional ECM approach. The bound (B) and QB eigenenergies of the structure are obtained by solving the single-band effective-mass Schrödinger equation using the argument principle method. The performance and the accuracy of the QBSM are evaluated for a double-barrier resonant structure and an asymmetric Fabry–Perot electron-wave interference filter. The self-consistent electron density and potential profiles calculated by the present method are shown to be in excellent agreement with the results obtained from the traditional ECM model. In addition to requiring less computational time, the present method is easily implemented and may be applied equally well to biased/unbiased, symmetric/asymmetric heterostructures.     

Rheo-acoustical study of the shear disruption of reversible aggregates. Ultrasound scattering from concentrated suspensions of red cell aggregates

Shear-induced disruption of reversible aggregates or clusters in a concentrated suspension is investigated by ultrasound backscattering in the low shear regime. Fractal aggregates are considered as non-Brownian scatterers much smaller than the wavelength with acoustic properties close to those of the surrounding liquid, so that the attenuation of the coherent field is weak and multiple scattering can be neglected. The concept of variance in local particle volume fraction is used to deduce a first-order expression of the ultrasound scattering cross section per unit volume for Rayleigh scatterers in a dense suspension. On the basis of a scaling law for the shear-induced disruption of aggregates, the shear stress dependence of the ultrasonic scattered intensity from a dense suspension of clusters is derived. In a second part, the shear breakup of hardened red blood cell aggregates is investigated in plane-plane flow geometry by ultrasound scattering. Rheo-acoustical experiments are analyzed within the framework of the self-consistent field approximation and the scaling laws currently used in microrheological models. Finally, the ability of ultrasonic, light reflectometry and viscometry methods to provide quantitative information about red blood cell aggregation and membrane adhesiveness is discussed.     

Modeling the propagation of ultrasonic waves in the interface region between two bonded elements

An important task in nondestructive materials evaluation is the development of techniques to characterize the bond quality of adherent joints. Binding forces are nonlinear and cause a nonlinear modulation of transmitted and reflected ultrasonic waves. As a consequence, the higher harmonics generated by an insonified monochromatic wave give information about the adhesive bonds. The local binding forces in thin bonded interfaces can be obtained by the amplitudes of the ultrasonic waves of the insonified frequency and its higher harmonics as transmitted through the interface. Additional phase measurements may enable one to obtain the evaluation of the full hysteretic cycle of the interaction force. In order to gain a deeper understanding of the interface region and to improve the technique, numerical simulations of the ultrasonic wave propagation through specimens of two bonded elements can be used. A simple model based on the local interaction simulation approach (LISA) is described in this contribution, and a comparison between the results of the simulations and the experimental data is presented. Besides its intrinsic relevance for NDE, the problem considered in this paper may be very useful to analyze and test models for the simulation of ultrasonic wave propagation in nonclassical nonlinear mesoscopic elastic materials.     

Basic phononic diagnostic measurements in fluid columns

A pre-selected 21 MHz ultrasonic transducer was used to produce characteristic pulses, arbitrarily similar to the quantum-mechanical concept of a phonon, describable as having a single-frequency modulated Gaussian shape. The propagation of such pulses in water-acoustic channels was studied in conjunction with nonlinear regression analysis and an Erlangian model for size distribution of molecular aggregates. Experimental results obtained distinguish between surface and bulk phenomena and provide quantitative measures of an average molecular cluster size in water. The relevance of the Erlangian model, in studying the near front of the channel, provides a significant distinction between the behavior of pure water and Ringer's solution of water. The inherent consistency between the various results re-enforces the theoretical approach, implying new venues for future research.     

高浓度纤维增强材料介电特性计算方法

针对复合材料的微观结构非均匀和各向异性特点带来的数值方法计算慢、内存消耗大的问题,利用均匀化方法计算纤维增强复合材料的等效电磁参数.采用了纤维低体积添加比至高体积添加比的迭代方法,同时提出了一个描述材料微观结构的修正的特征长度,将现有的均匀化方法推广至非准静态(微波频段)条件下高纤维浓度情况.提出的修正的均匀化模型可直接用于反射系数、屏蔽效能等计算,其屏蔽效能与实际微观结构复合材料的数值仿真结果进行了对比,验证了提出的等效电磁参数计算公式的有效性和频率适用范围.     

Quantitative evaluation of ultrasonic C-scan image in acoustically homogeneous and layered anisotropic materials using three dimensional ray tracing method

Quantitative evaluation of ultrasonic C-scan images in homogeneous and layered anisotropic austenitic materials is of general importance for understanding the influence of anisotropy on wave fields during ultrasonic non-destructive testing and evaluation of these materials. In this contribution, a three dimensional ray tracing method is presented for evaluating ultrasonic C-scan images quantitatively in general homogeneous and layered anisotropic austenitic materials. The directivity of the ultrasonic ray source in general homogeneous columnar grained anisotropic austenitic steel material (including layback orientation) is obtained in three dimensions based on Lamb’s reciprocity theorem. As a prerequisite for ray tracing model, the problem of ultrasonic ray energy reflection and transmission coefficients at an interface between (a) isotropic base material and anisotropic austenitic weld material (including layback orientation), (b) two adjacent anisotropic weld metals and (c) anisotropic weld metal and isotropic base material is solved in three dimensions. The influence of columnar grain orientation and layback orientation on ultrasonic C-scan image is quantitatively analyzed in the context of ultrasonic testing of homogeneous and layered austenitic steel materials. The presented quantitative results provide valuable information during ultrasonic characterization of homogeneous and layered anisotropic austenitic steel materials.