过渡金属硫化物催化剂催化加氢作用机理

负载型过渡金属(Co、Mo、Ni、W)硫化物催化剂广泛应用于石油炼制催化加氢过程.为了开发高性能的加氢催化剂,过渡金属硫化物催化剂催化活性相的结构与加氢脱硫性能的关系一直以来是催化研究的热点之一.本文从过渡金属硫化物催化剂的活性相结构和反应物在催化剂表面活性位上的吸附-催化反应机理两个方面阐述了过渡金属硫化物催化剂的催化作用研究进展,并对过渡金属硫化物催化剂催化机理研究存在的争议和未来的研究方向进行了分析.     

过渡金属硫化物催化剂催化加氢作用机理

负载型过渡金属(Co、Mo、Ni、W)硫化物催化剂广泛应用于石油炼制催化加氢过程.为了开发高性能的加氢催化剂,过渡金属硫化物催化剂催化活性相的结构与加氢脱硫性能的关系一直以来是催化研究的热点之一.本文从过渡金属硫化物催化剂的活性相结构和反应物在催化剂表面活性位上的吸附-催化反应机理两个方面阐述了过渡金属硫化物催化剂的催化作用研究进展,并对过渡金属硫化物催化剂催化机理研究存在的争议和未来的研究方向进行了分析.     

过渡金属硫化物催化剂催化加氢作用机理

负载型过渡金属(Co、Mo、Ni、W)硫化物催化剂广泛应用于石油炼制催化加氢过程。为了开发高性能的加氢催化剂,过渡金属硫化物催化剂催化活性相的结构与加氢脱硫性能的关系一直以来是催化研究的热点之一。本文从过渡金属硫化物催化剂的活性相结构和反应物在催化剂表面活性位上的吸附-催化反应机理两个方面阐述了过渡金属硫化物催化剂的催化作用研究进展,并对过渡金属硫化物催化剂催化机理研究存在的争议和未来的研究方向进行了分析。     

噻吩加氢脱硫和四氢萘催化加氢反应中的载体和助剂的影响

 为了更好地认识加氢脱硫和催化加氢反应中的载体影响和助剂效应，在同样的催化剂制备方法及反应条件下，研究了噻吩加氢脱硫（HDS）和四氢萘催化加氢（HYD）反应．结果表明，对于无助剂的Mo和W催化剂，载体对催化活性的影响顺序为TiO2－Al2O3＞ZrO2＞Al2O3．助剂的添加改变了催化剂活性顺序．Ni助剂催化剂的活性明显高于Co助剂催化剂．ZrO2担载的添加Ni的Mo和W催化剂分别获得了最佳的HDS和HYD活性．然而，添加Pt的Mo和W催化剂其HDS和HYD活性仅是Pt与Mo（W）二者的加和，Pt与Mo（W）之间没有协同效应．先将担载的Mo和W预硫化再将助剂引入体系的催化剂制备方法可以避免Ni和Co过早硫化形成类硫化镍（或硫化钴）物相，与采用螯合物分子方法制备的催化剂间有一定的相似性．     

置换反应制备Pd-Fe双金属催化剂及其催化加氢性能

以Fe(CO)5为前体采用超声法合成纳米Fe胶体粒子,通过Fe胶体与PdCl2发生金属置换反应制备出活性炭负载Pd-Fe双金属催化剂.研究了表面活性剂聚乙烯吡咯烷酮对制备负载型催化剂的影响.采用XRD、H2程序升温还原(H2-TPR)、TEM、EDX等表征手段对催化剂进行表征,以苯乙炔加氢反应为探针反应考察了Fe含量对于催化剂催化性能的影响.结果表明加氢催化活性较差的金属组分Fe在合适的比例下可以促进Pd基催化剂的加氢催化活性和选择性,然而,过多的Fe也会降低其催化活性.     

置换反应制备Pd-Fe双金属催化剂及其催化加氢性能

以Fe(CO)5为前体采用超声法合成纳米Fe胶体粒子,通过Fe胶体与PdCl2发生金属置换反应制备出活性炭负载Pd-Fe双金属催化剂。研究了表面活性剂聚乙烯吡咯烷酮对制备负载型催化剂的影响。采用XRD、H2程序升温还原（H2-TPR）、TEM、EDX等表征手段对催化剂进行表征,以苯乙炔加氢反应为探针反应考察了Fe含量对于催化剂催化性能的影响。结果表明加氢催化活性较差的金属组分Fe在合适的比例下可以促进Pd基催化剂的加氢催化活性和选择性,然而,过多的Fe也会降低其催化活性。     

悬浮床加氢裂化水溶性催化剂的筛选与表征

催化加氢作用, 当金属组分A和组分B浓度分别为 15 μg/g ～ 25 μg/g 和 1100 μg/g～1300 μg/g时催化剂具有较好的催化加氢活性。两元水溶性催化剂硫化后的XPS、XRD和TEM分析结果表明：活性组分经硫化反应后生成了金属硫化物,但组分A硫化率不足50％;组分B易硫化结晶,其晶粒成为组分A的硫化物晶粒或颗粒分散的“载体”,使组分A的硫化物具有较高的分散度,提高了催化剂的加氢活性;A-B双金属水溶性催化剂经硫化反应后所形成的颗粒尺寸在100 nm左右,说明两元金属催化剂在硫化结晶过程中确实存在相互分散和抑制晶粒增长的作用。     

炭载钌催化剂的微波制备及其水相乙酰丙酸加氢性能（英文）

生物质衍生物乙酰丙酸是生物质转化过程中重要的平台分子,对其进行催化加氢可以得到高附加值的产物,是连接生物质转化和石油化工的重要途径。本实验研究了无溶剂微波辅助热解法绿色制备负载型钌基催化剂,以Ru3(CO)12为金属前体,碳纳米管、椰壳活性炭和活性氧化铝为催化剂载体,该制备方法简单易操作,环保高效低能耗,不使用溶剂,避免了杂质的引入和对催化剂的污染,是一种新型负载型贵金属催化剂的制备方法。同样采取传统浸渍法制备Ru/γ-Al2O3-IM。在乙酰丙酸水相催化加氢反应中的催化活性顺序为Ru/ACRu/CNT≈Ru/FCNTRu/γ-Al2O3-M W≈Ru/γ-Al2O3-IM。比较不同反应溶液水、甲醇、乙醇、苯甲醚、环己烷和丙酮等对于乙酰丙酸催化加氢反应的影响,并通过考察反应温度、反应压力和反应物初始浓度等因素对加氢反应的影响,确定最佳实验条件为:反应温度为90℃,反应压力2.0 MPa,适宜反应物浓度为0.10 g/m L,产品GVL收率大于99%。     

以壳聚糖为介质的Ni-B非晶态合金/膨胀石墨的制备及其催化加氢性能

以膨胀石墨担载壳聚糖,采用金属诱导化学镀法制备了负载型Ni-B非晶态合金催化剂.通过X射线衍射、电感耦合等离子体发射光谱、扫描电子显微镜、透射电子显微镜和选区电子衍射等技术研究了壳聚糖对Ni-B催化剂非晶性质、组成、形貌、粒径及分散度的影响.以环丁烯砜加氢制环丁砜和对氯硝基苯加氢制对氯苯胺为探针反应,考察了壳聚糖对负载型Ni-B非晶态合金催化剂催化性质的影响,讨论了壳聚糖用量及水溶性壳聚糖的相对分子质量对催化剂性质的影响.结果表明,壳聚糖介质的引入能够提高活性组分的分散度,减小活性组分的粒径,从而明显提高了催化剂的催化加氢活性.当壳聚糖在载体表面形成单层分散时催化剂活性最高.分子质量相对较低的水溶性壳聚糖有利于生成粒径小、分散性好和催化活性高的Ni-B非晶态合金催化剂.     

炭载钌催化剂的微波制备及其水相乙酰丙酸加氢性能

生物质衍生物乙酰丙酸是生物质转化过程中重要的平台分子,对其进行催化加氢可以得到高附加值的产物,是连接生物质转化和石油化工的重要途径。本实验研究了无溶剂微波辅助热解法绿色制备负载型钌基催化剂,以Ru₃（CO）₁₂为金属前体,碳纳米管、椰壳活性炭和活性氧化铝为催化剂载体,该制备方法简单易操作,环保高效低能耗,不使用溶剂,避免了杂质的引入和对催化剂的污染,是一种新型负载型贵金属催化剂的制备方法。同样采取传统浸渍法制备Ru/γ-Al₂O₃-IM。在乙酰丙酸水相催化加氢反应中的催化活性顺序为Ru/AC > Ru/CNT ≈ Ru/FCNT > Ru/γ-Al₂O₃-MW ≈ Ru/γ-Al₂O₃-IM。比较不同反应溶液水、甲醇、乙醇、苯甲醚、环己烷和丙酮等对于乙酰丙酸催化加氢反应的影响,并通过考察反应温度、反应压力和反应物初始浓度等因素对加氢反应的影响,确定最佳实验条件为：反应温度为90℃,反应压力2.0 MPa,适宜反应物浓度为0.10 g/mL,产品GVL收率大于99%。     

复合金属氧化物脱硫剂脱除SO2的研究

铁系氧化物是一种有开发前途的脱硫剂，研究中发现，某些金属氧化物和铁氧化物进行匹配，在脱硫过程中具有良好的协同作用，可改善铁氧化物的脱硫性能［１～３］。进一步研究改善脱硫剂活性、稳定性、硫容、寿命、再生性能很有必要，在此基础上，本文研制出三代脱硫剂。１...     

沉淀法回收生物油高温馏分中的酚类物质

为了研究金属离子沉淀法对生物油高温馏分中酚类物质的回收,提高生物油中化学物质的利用率,利用气相色谱-质谱联用仪(GC-MS)从NaOH试剂浓度、反应温度和反应时间三个方面研究了镁离子对生物油中酚类物质的回收效果。结果表明,镁离子与酚类物质形成了不溶物,而且不同浓度的氢氧化钠溶液(1.0-4.0 mol/L)、不同的反应温度(25-85℃)以及不同的反应时间(5-35 min)对实验结果有着不同程度的影响。结果表明,在反应温度为25℃、氢氧化钠浓度为2.5mol/L,反应时间在20 min时为最佳反应条件。在此条件下,对生物油高温馏分中对乙基苯酚的回收率可达34.97%。     

磁性功能化酚醛树脂的合成及对金属离子的吸附性能

磁性功能化酚醛树脂的合成及对金属离子的吸附性能;环氧酚醛树脂;螯合;金属离子;溶胀;吸附容量;吸附动力学     

Manganese amido-imine bisphenol Hangman complexes

A modular ligand macrocycle is composed from two phenolic groups linked to a cyclohexane bridge through an amide bond and an imine bond. The stability of the asymmetric linkers to metathesis permits a macrocyclic platform to be assembled from the condensation of two different phenolic groups in a single-step, high yield, reaction. The primary coordination sphere may be tuned with functional groups on one phenolic group. The other phenolic group may be modified with a scaffold possessing a proton transfer group. In this way, control over the secondary coordination sphere of the macrocycle is achieved. Manganese complexes of the amido-imine linked macrocycle catalytically epoxidizes 1,2-dihydronapthalene using sodium hypochlorite as the oxidant. The amido-imine macrocycles represent a new metal active site capable of supporting high oxidation states and attendant atom transfer chemistry while at the same time permitting control over the primary and secondary sphere of the metal center.     

Pd/C-catalyzed deoxygenation of phenol derivatives using Mg metal and MeOH in the presence of NH(4)OAc

[STRUCTURE: SEE TEXT] A Pd/C-catalyzed deoxygenation method of phenolic hydroxyl groups via aryl triflates or mesylates using Mg metal in MeOH at room temperature was developed. The addition of NH4OAc dramatically affects the reactivity and reaction rate. This method is particularly attractive to provide an environmentally benign and widely applicable removal method of phenolic alcohols under quite mild reaction conditions.     

高温氧化铁脱硫剂还原硫化的热重热磁研究

以钢厂赤泥为主要原料制成四种高温煤气脱硫剂，用动态热重热磁天平对其还原和硫化行为进行了在位研究，未用Ｈ２还原的样品几乎无脱硫活性，经Ｈ２还原后有良好的脱硫性能。脱硫剂的还原和硫化性能与其物理化学性质密切相关，并对其影响进行了讨论。     

In situ facile loading of noble metal nanoparticles on polydopamine nanospheres via galvanic replacement reaction for multifunctional catalysis

Noble metal nanoparticles(Pd,Ag,Pt,Au) with small and relatively uniform sizes were loaded on polydopamine nanospheres through in situ galvanic replacement reaction in aqueous solution.No additional reductant,surfactant or organic solvent was needed.X-ray photoelectron spectroscopy results revealed that the amount of quinone increased,while the amount of phenolic hydroxyl decreased on PDA nanospheres,indicating that the galvanic displacement reaction occurred between catechol groups and noble metal ions.The as-prepared PDA/Pd exhibited high catalytic activity and excellent stability in styrene hydrogenation.Moreover,PDA spheres retains the photo-thermal effect to serve as a nano-sized heater to accelerate the catalytic reactions under near-infrared illumination.     

Chemical shifts of phenolic monomers in solution and implications for addition and self‐condensation

Alkali metal counter‐cations alter the electron density of phenolates in solution by electrostatic interactions. This change in electron density affects their reactivity toward formaldehyde, hydroxymethylphenols, and isocyanates during polymerization. The electronic perturbation of phenolic model compounds in the presence of alkali metal hydroxides was investigated with ¹³C and ¹H nuclear magnetic resonance in polar solvents relative to non‐ionic controls, altering the chemical shifts of the model compounds, thus indicating changes in electron density using the chemical shift as a proxy. These shifts were attributed to Coulombic electrostatic interactions of the counter‐cation with the phenolate anion that correlated to hydrated ionic radius and solvent dielectric constants. The predicted relative reaction rates for formaldehyde addition based on electron density ranking from ¹³C nuclear magnetic resonance of the phenolic models was compared with the literature values. Predictions for condensation reactions of 2‐ and 4‐hydroxymethylphenol from chemical shifts were consistent with published results. The results permit predictions for the reaction of phenolic compounds for the formation of thermosetting polymeric materials. Copyright © 2012 John Wiley & Sons, Ltd.     

Solar-powered electrochemical oxidation of organic compounds coupled with the cathodic production of molecular hydrogen

A Bi-doped TiO2 anode, which is prepared from a mixed metal oxide coating deposited on Ti metal, is shown to be efficient for conventional water splitting. In this hybrid photovoltaic-electrochemical system, a photovoltaic (PV) cell is used to convert solar light to electricity, which is then used to oxidize a series of phenolic compounds at the semiconductor anode to carbon dioxide with the simultaneous production of molecular hydrogen from water/proton reduction at the stainless steel cathode. Degradation of phenol in the presence of a background NaCl electrolyte produces chlorinated phenols as reaction intermediates, which are subsequently oxidized completely to carbon dioxide and low-molecular weight carboxylic acids. The anodic current efficiency for the complete oxidation of phenolic compounds ranges from 3% to 17%, while the cathodic current efficiency and the energy efficiency for hydrogen gas generation range from 68% to 95% and 30% to 70%, respectively.     

Removal of Cd(II) and Cu(II) ions from aqueous solutions using tannin-phenolic polymer immobilized on cellulose

Tannin was crosslinked with paraformaldehyde to prepare tannin-phenolic polymer(TP), TP immobilized on cellulose (TPPC) was prepared by the cross-linking reaction of TP and cellulose with epichlorohydrin as crosslinking agent. Tannin was crosslinked prior to being immobilized on cellulose, which could increase the effective phenolic hydroxyl content in cellulose skeleton and improve the adsorption property of TPPC for metal ions. The maximum adsorption capacity of TPPC for Cd(II) and Cu(II) ions were 80.11?mg/g and 55.97?mg/g, respectively. The adsorption equilibrium data for the metal solutions fitted the Langmuir model well. The adsorption rate data fitted well to a Pseudo-second-order model. The TPPC has potential application value in the field of metal wastewater treatment.