The spontaneous polymerization of 4-vinylpyridinium p-styrene-sulfonate or 4-vinylpyridinium chloride with sodium p-styrenesuifonate or of 4-vinylpyridinium 2-acrylamido-2-methylpro-panesulfonate with sodium p-styrenesuifonate produces an amphoteric, equimolar copolymer. An UV study on the interaction between 4-vinylpyridinium chloride and sodium p-styrenesulfonate indicates an absorption maximum corresponding to 1:1 charge transfer complex. From the observed results, a charge-transfer polymerization of 4-vinylpyridinium salts with electron-donating monomers is elucidated. 相似文献
The possibility of applying activated carbon and polymeric sorbents poly(4-vinylpyridine), polytrimethylsilylpropyne (PTMSP), bromo-substituted PNMSP (Br-PNMSP), poly(N-methyl-4-vinylpyridinium iodide) for the sorption recovery of iodine from a 0.5 M solution of sodium chloride is studied. The dependence of iodine sorption on the pH of solution, the amount of adsorbent, and the duration of contact between the solution and adsorbent is studied. The highest sorption capacity (G = 616.78 mg/g) is attained by using poly(N-methyl-4-vinylpyridinium iodide) anionite with the addition of iodine to form complex triiodide ions. The dynamics of iodine adsorption on poly(4-vinylpyridine) is described by a kinetic model of pseudosecond order. The composition and structure of the iodine compounds sorbed by polymers and activated carbon are studied by Raman spectroscopy (RS). 相似文献
N-sulfonic acid poly(4-vinylpyridinium) chloride is easily prepared by the reaction of poly(4-vinylpyridine) with neat chlorosulfonic acid. This reagent can be used as an efficient catalyst for the N-Boc protection of amines at room temperature and neat conditions. This new method consistently has the advantages of excellent yields and short reaction times. Further, the catalyst can be reused and recovered for several times. 相似文献
The present work describes experimental measurements of submolecular-level interaction energies involved in the process of peptide adsorption on polymer films using surface plasmon resonance spectroscopy. Gibbs energy change on adsorption (DeltaG(ad)) for tyrosine, phenylalanine, and glycine homopeptides were measured at 25 degrees C and pH 7 on highly uniform, nanothin polymer films, and the results were used to predict DeltaG(ad) for homologous homopeptides with a larger number of residue units. Nanothin poly(2-vinylpyridine), poly(styrene), and poly(1-benzyl-2-vinylpyridinium bromide) films were used for the adsorption studies; they were prepared using a graft polymerization methodology. In-situ swelling experiments were done with ellipsometry to examine the uniformity of the surfaces and to ensure that the graft densities of the different polymer films were similar to facilitate the comparison of adsorption results on these surfaces. The swelling experiments showed that the films were uniform, and the grafting densities were found to be 0.14-0.17 chains/nm(2). For uncharged surfaces, predicted and measured DeltaG(ads) values for homopeptides deviated by < or =4.9%. To extend this approach to a mixed-residue peptide, measurements were made for glycine, phenylalanine, and tyrosine-leucine subunits found in leucine enkephalin. The predicted DeltaG(ads) values for leucine enkephalin deviated by 3.0% and -9.1% for poly(2-vinylpyridine) and poly(styrene) films, respectively. Deviations between measured and predicted adsorption energies were larger for the charged poly(1-benzyl-2-vinylpyridinium bromide) surface relative to uncharged surfaces. While the adsorption energies were found to be additive within experimental uncertainties for the charged surface, generally speaking, measured uncertainty values were also larger for the charged surface. 相似文献
Zwitterionic matrix stepwise polymerization of 4-vinylpyridine (VP) using isotactic poly(acrylic acid) (i-PAA) as a template results in formation of crystalline polycomplexes consisting of i-PAA and of ionene (I): Depending on the concentration of VP and i-PAA, the two types of crystalline polycomplexes can be prepared. The complex containing long ionene sequences with n ? 2 is formed when [VP]0 = [i-PAA]0 ≥ 0.05M. At [VP]0 = [i-PAA]0 ? 0.01M, the complex formed evidently contains the ionene dimer (n = 2). The x-ray structures of the crystalline complexes are identical with those obtained by mixing of i-PAA and the corresponding dimer and polymer presynthesized in the absence of the template. The matrix polymerization of VP in the presence of syndiotactic and atactic PAA at the same conditions results in formation of amorphous polycomplexes. 相似文献
The reaction between poly (4-vinylpyridine) and propargyl chloride was studied in methanol. It was shown that, independently of the ratio of reactants to each other, the end products of the reaction are polymers with conjugated bond systems formed by the opening of the propargyl triple bond which was activated by interaction with poly (4-vinylpyridine). It was shown that “normal” quarternization of poly (4-vinylpyridine) by propargyl chloride precedes accelerated polymerization of propargyl chloride which begins at 6 to 8% alkylation. It was established that the solution becomes structured before accelerated polymerization begins. A possible mechanism for this reaction has been proposed. 相似文献
The modification of poly(4-vinylpyridine) with ω-bromocarboxylic acids and alkyl bromides yields three types of polyampholytes: polyampholytes containing both cationic and anionic groups in each monomer unit (polybetaines), polyampholytes containing betaine and cationic units, and polyampholytes containing betaine units and side cetyl radicals. Their complex formation with liposomes formed from zwitterionic (electroneutral) phosphatidylcholine and anionic diphosphatidylglycerol (cardiolipin) is investigated. The method for fixation of polymers on the liposomal membrane and the stability of the formed complexes are determined by the chemical structure of macromolecules. For the most part, polyelectrolytes are electrostatically adsorbed on the membrane and are fully removed from it with an increase in the salt concentration in the surrounding solution. An exception is the polybetaine obtained through the modification of poly(4-vinylpyridine) with ω-bromobutyric acid, which irreversibly binds to liposomes probably owing to the incorporation of macromolecular fragments into the hydrophobic part of the lipid bilayer. The insertion of side cetyl radicals into polybetaine molecules stabilizes their complexes with liposomes in the presence of salts. The cytotoxicity of the synthesized polyampholytes is one to two orders of magnitude lower than that of a cationic polymer with the same degree of polymerization. 相似文献
In order to determine the counter-anion effect on conductivity of poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium)] backbone in aqueous solutions, a set of three polyelectrolytes with three different counter-ions: poly[N-(3,6,9-trioxadecyl)-4-vinylpyridinium]bromide P4VP164Br and its chlorate and tosylate derivatives P4VP164ClO4 and P4VP164Ts respectively, were prepared by spontaneous polymerization of 4-vinylpyridine. This method gives a grafted polyelectrolyte having a positive charge on each pyridinic moiety on the backbone. The conductivities of cationic polyelectrolyte aqueous solution were determined in the concentration range from 10−4 to 10−2 M at 25 °C. The variation of the conductivity versus concentration of the investigated system exhibits a typical polyelectrolyte behavior. The polycation mobility was found to be dependent on the counter-anion nature. Thus, the polyelectrolyte conductivity increases with the ion size. This shows that big ions are weakly or not associated to the backbone.In order to confirm this steric hindrance, we have considered the conductivities of these three anions Br−, ClO4− and Ts− in their sodium salts, both alone and in the presence of 3,6,9-trioxadecanol (PEO164) free chains. In the two cases, the conductivities decrease in the order ΛBr>ΛClO4>ΛTs.These results suggest that counter-ion mobility is mainly influenced by steric effect PEO164 grafted chains.Values of the conductivity predicted from Manning rod-like polyelectrolyte model were compared with our experimental results. 相似文献
The thermal behaviour of blends of a low molar mass mesogenic acid, 6-(4-n-butyloxy-4'-oxybiphenyl)hexanoic acid (BOBPOHA) with polystyrene, poly(2-vinylpyridine) and poly(4-vinylpyridine) has been characterized. BOBPOHA exhibits a monotropic smectic A phase and is essentially immiscible with polystyrene. Thus, the transition temperatures of the acid are independent of blend composition. In contrast, the thermal properties of the acid are strongly modified on blending with poly(2-vinylpyridine) and poly(4-vinylpyridine). Molecular mixing occurs in these blends below approximately 0.2 mol fraction of acid. This miscibility is driven by the formation of hydrogen bonds between the pyridyl and acid moieties. At higher concentrations of acid, phase separation occurs. Liquid crystallinity is not observed in the miscible blends while in the immiscible blends mesomorphic behaviour is attributed to regions of phase separated acid. 相似文献
Platinum and gold electrodes are coated with thin, adherent polymer layers by the oxidation of divinylbenzene, 4-vinylpyridine, or phenol, and by the reduction of N-methyl-4-vinylpyridinium salts. All depositions are performed in acetonitrile electrolytes. The neutral polymer coatings derived from the first three monomers affect the cyclic voltammetry of reversible redox couples by controlling the rate of diffusion to the electrode surface. The neutral form of a redox couple penetrates the coating more rapidly than the charged form. Extreme negative potentials cause a marked swelling of the coatings; the swelling is partially reversible. An anomalous prewave appears for ferrocene oxidation. The cationic polymer coating derived from N-methyl-4-vinylpyridinium traps ferrocyanide electrostatically. 相似文献
This paper presents a novel method for preparation of polymer-silica colloidal nanocomposites based on emulsion polymerization and subsequent sol-gel nanocoating process. The polystyrene latex particles bearing basic groups on their surfaces were successfully synthesized through emulsion polymerization using 4-vinylpyridine (4VP) as a functional comonomer and polyvinylpyrrolidone (PVP) as a surfactant. A series of poly(styrene-co-4-vinylpyridine)/SiO2 nanocomposite particles with smooth or rough core-shell morphology were obtained through the coating process. The poly(styrene-co-4-vinylpyridine) particles could be dissolved subsequently or simultaneously during the sol-gel coating process to form hollow particles. The effects of the amount of 4VP, PVP, NH(4)OH, and tetraethoxysilane (TEOS) on both the nanocomposite particles and hollow particles were investigated. Transmission electron microscopy showed that the morphology of the nanocomposite particles and hollow particles was strongly influenced by the initial feed of the comonomer 4VP and the coupling agent PVP. The conditions to obtain all hollow particles were also studied. Thermogravimetric analysis and energy dispersive X-ray spectroscopy analyses indicated that the interiors of hollow particles were not really "hollow". 相似文献
In order to determine the stereoregularity of poly(4-vinylpyridine), 4-vinylpyridine-β,β-d2 was synthesized from 4-acetylpyridine. The 1H-NMR spectra of the deuterated and nondeuterated polymers were measured and analyzed. From the 1H-NMR spectra of poly(4-vinylpyridine-β,β-d2), triad tacticity can be obtained, while the 1H-NMR spectra of nondeuterated poly(4-vinylpyridine) give the fraction of isotactic triad. The 13C-NMR spectra of poly(4-vinylpyridine) were also observed, and the spectra of C4 carbon of polymers were assigned by the pentad tacticities. The fraction of isotactic triad of poly(2-vinylpyridine) and poly(4-vinylpyridine) obtained under various polymerization conditions were determined. The radical polymerization and anionic polymerizations with phenylmagnesium bromide and n-butyllithium as catalysts of 4-vinylpyridine gave atactic polymers. 相似文献
When heated in solution at about 160°C, pyridine quaternary salts of bromomalonamides lose 1 mole of cyanic or isocyanic acid almost quantitatively in a manner quite analogous to the decarboxylation of an acid. By DTA and DSC, the crystalline salts are stable up to their melting points (>220°C) at which temperatures concurrent fusion and decyanation processes occur (endotherm); these are immediately followed by an exotherm related to the trimerization of cyanic acid. TGA measurements on the solid salts do not clearly define the loss of 1 mole of cyanic acid because in the solid state, thermal decyanation is accompanied to some extent by other pyrolytic reactions. Preparative methods for quaternizing poly(4-vinylpyridine) with bromomalonamide are described and two polymeric quaternary salts (33 and 100% substituted) were prepared and analyzed. These polyelectrolytes are water soluble and upon the addition of base the yellow polymeric nitrogen ylids are generated. Infrared spectra on the polymeric quaternary salts and visible spectra on the polymeric ylids are included. The ylid chromophore has an ε = 1800 at λmax = 415 nm. The dilute solution viscosity behavior of these polymers in H2O and in 0.05N KBr is typical of polyelectrolytes. Both polymers in dilute solution show a maximum in ηsp versus pH plots. In water, the viscosity of these polymers decreases with time, and it is proven that this results from a conformational change which accompanies amide hydrolysis rather than polymer backbone degradation. Glass transitions are not detectable by DTA but both polymers show well-defined trimerization exotherms for cyanic acid starting at 170–175°C. Thus, decyanation of the solid polymeric quaternary salts is more analogous to decyanation of the crystalline quaternarys in solution than as solids. TGA measurements on the polymers show weight losses which are of the correct order of magnitude and in the correct temperature range for monodecyanation. Some data are presented which suggest that perhaps a second mole of cyanic acid is lost at about 250°C. Quaternization of poly(4-vinylpyridine) with bromomalonamide reduces its gross decomposition temperature from 385°C to about 285–317°C. It is demonstrated how thermal decyanation can be used for the in situ generation of cyanic acid for the modification of organic compounds. The preparation of a partial urethane of poly(vinyl alcohol) using this method is described. We have also shown that aliphatic quaternary salts can be prepared and that they too undergo the decyanation reaction. 相似文献
In order to determine the stereoregularity of poly(2-vinylpyridine), 2-vinylpyridine-β,β-d2 was synthesized. The 1H-NMR spectra of the deuterated polymer in D2SO4 and o-dichlorobenzene solutions showed three peaks, which were assigned to triad tacticities. Since the absorptions of heterotactic and syndiotactic triads of methine protons overlap those of methylene protons in nondeuterated polymers, only isotactic triad intensities can be obtained from the 1H-NMR spectra of nondeuterated poly(2-vinylpyridine). The 13C-NMR spectra of poly(2-vinylpyridine) were obtained in methanol and sulfuric acid solutions. In methanol solution the absorption was split into three groups, which cannot be explained by triads, and in sulfuric acid solution several peaks were observed. These splittings may be due to pentad tacticity. The results show that poly(2-vinylpyridine) obtained by radical polymerization is an atactic polymer. 相似文献
Summary: The miscibility and thermal behaviour of binary mixtures of poly(styrene-co-itaconic acid) containing 11 or 27 mol % of itaconic acid (PSIA-11 or PSIA27) with poly(butyl methacrylate) (PBMA)or poly(butyl methacrylate-co-4-vinylpyridine) containing 10 or 26 mol% of 4-vinylpyridine (PBM4VP-10, PBM4V-P26) were investigated by differential scanning calorimetry, scanning electron microscopy, FTIR spectroscopy and thermogravimetry. The results showed that 11 mol % of itaconic acid and 10 mol % of 4-vinylpyridine respectively introduced within the polystyrene and poly(butyl methacrylate) matrices induced the miscibility of this pair of polymers due to specific interactions of hydrogen bonding type with partial pyridine protonation that occurred between the two copolymers as evidenced by FTIR from the appearance of two new bands at 1607 cm−1 and 1640 cm−1. Increasing itaconic acid content from 11 to 27 mol % led to a decrease of the intensity of the specific interactions within PSIA-27/PBM4VP blends and is attributed to both accessibility and self association effects as evidenced by DSC from the change of the shape of the Tg- composition curves and by FTIR spectroscopy. As shown from the thermogravimetric study, the presence of these specific interactions delayed the anhydride formation and improved the thermal stability of the blends. 相似文献
Miscibility enhancement of ionomer/ionomer and ionomer/polymeric acid systems is studied on the polymer pairs of poly(styrene-co-tetramethyl ammonium styrenesulfonate)/poly(ethyl acrylate-co-N-methyl-4-vinylpyridinium iodide) and poly(styrene-co-styrenesulfonic acid)/poly(ethyl acrylate-co-N-methyl-4-vinylpyridinium iodide). NMR and dynamic mechanical results show that in these blends direct macroion–macroion interaction can be achieved with the elimination of microcounterions from the polymer chains. Ion-ion attraction leads to a miscibility enhancement comparable to that of the previously reported proton transfer blends; a miscible blend is obtained with ca. 5 mol% of ions in the polymers. 相似文献
In-situ formation of polyimide was carried out in solution of copolymers derived from styrene and 4-vinylpyridine. The in-situ formed polyamic acid formed a strong hydrogen-bonding with pyridine moiety of the copolymers, resulting in homogeneous solutions. Cast films obtained from the solutions were clear and transparent without phase separations, and mechanical properties of the films were much stronger than those of films from the original copolymers. In-situ polymerization of acrylamide in poly(styrene) was carried out by anionic polymerization to form Nylon 3 which was dispersed in poly(styrene) as fine particles, and mechanical properties of the poly (styrene) were greatly improved. 相似文献
The polymerization of vinylpyridine initiated by cupric acetate has been studied. The rate of polymerization was greatly affected by the nature of the solvent. In general polar solvents increased the rate of polymerization. Polymerization was particularly rapid in water, acetone, and methanol. The initial rate of polymerization of 4-vinylpyridine (4-VP) in a methanol–pyridine mixture at 50°C. is Rp = 6.95 × 10?6[Cu11]1/2 [4-VP]2 l./mole-sec. The activation energy of initiation by cupric acetate is 5.4 ± 1.6 kcal./mole. Polymerization of 2-vinylpyridine and 2-methyl-5-vinylpyridine with the same initiator was much slower than that of 4-VP. Dependence of Rp on monomer structure and solvent is discussed. Kinetic and spectroscopic studies led to the conclusion that the polymerization of 4-VP is initiated by one electron transfer from the monomer to cupric acetate in a complex having the structure, (4-VP)2Cu(CH3COO)2. 相似文献