Synthesis of molecular motors incorporating para-phenylene-conjugated or bicyclo[2.2.2]octane-insulated electroactive groups

The insulating role of the bicyclo[2.2.2]octane fragment has been theoretically evaluated by comparing the electronic coupling parameter (V(ab)) in 1,4-bis(ferrocenyl)benzene (1) and 1,4-bis(ferrocenyl)bicyclo[2.2.2]octane (2). The geometries were optimized by DFT and an extended Hückel calculation was performed to evaluate V(ab) by the dimer splitting method. The calculations showed a 12-fold decrease of the electronic coupling from 60 meV for 1 to 5 meV for 2. The second part describes the synthesis of two potential molecular motors with one incorporating the insulating bicyclo[2.2.2]octane fragment. These molecules are based on a ruthenium complex bearing a tripodal stator functionalized to be anchored onto surfaces. The ferrocenyl electroactive groups and the cyclopentadienyl (Cp) rotor are connected through a p-phenylene spacer (5) or through a spacer incorporating an insulating bicyclo[2.2.2]octane moiety (6).     

Terminal end-group efficiency for the nematic phase using model bicyclo[2.2.2]octanes

The synthesis is reported of new liquid crystals incorporating the 1,4-disubstituted bicyclo[2.2.2]octane ring and a series of substituents in a terminal position on the molecular core. The nature of the terminal substituent is varied from apolar with a small dipole moment to polar with a strong dipole moment. The angle of the dipole moment with respect to the molecular axis is also varied. An updated order of terminal group efficiency for substituents in a terminal position for the nematic phase is provided. The bicyclo[2.2.2]octane ring shields halogen substituents in a lateral position on phenyl rings attached to the bicyclooctane ring to a small degree and reduces the steric efects of these substituents, giving rise to high relative nematic-isotropic transition temperatures.     

Terminal end‐group efficiency for the nematic phase using model bicyclo[2.2.2]octanes

The synthesis is reported of new liquid crystals incorporating the 1,4‐disubstituted bicyclo[2.2.2]octane ring and a series of substituents in a terminal position on the molecular core. The nature of the terminal substituent is varied from apolar with a small dipole moment to polar with a strong dipole moment. The angle of the dipole moment with respect to the molecular axis is also varied. An updated order of terminal group efficiency for substituents in a terminal position for the nematic phase is provided. The bicyclo[2.2.2]octane ring shields halogen substituents in a lateral position on phenyl rings attached to the bicyclooctane ring to a small degree and reduces the steric efects of these substituents, giving rise to high relative nematic–isotropic transition temperatures.     

Rearrangement of a mesylate tropane intermediate in nucleophilic substitution reactions. Synthesis of aza-bicyclo[3.2.1]octane and aza-bicyclo[3.2.2]nonane ethers,imides, and amines

Nucleophilic substitution of 2beta-mesyloxymethyl-N-methyl-3beta-p-tolyl-tropane intermediate with alkoxides, metal imides, or amines was found to lead not only to the expected bicyclo[3.2.1]octane (tropane) ether, imide, and amine derivatives but also to unexpected bicyclo[3.2.2]nonane derivatives. When alkoxides were used as nucleophile, only the rearranged bicyclo[3.2.2]nonane structure was obtained, whereas the use of amines or imides as nucleophile afforded a mixture of the two structures. The bicyclo[3.2.2]nonane structure was assigned by NMR analysis.     

Lewis acid-mediated generation of bicyclo[5.3.0]decanes and bicyclo[4.3.0]nonanes

[reactions: see text] Fragmentation of the cyclobutane-containing adducts generated from intramolecular cycloadditions of cyclobutadiene with olefins provides rapid entry into bicyclo[5.3.0]decane and bicyclo[4.3.0]nonane ring systems. Whereas earlier studies featured thermal methods to achieve the desired rearrangements, a mild, Lewis acid-mediated fragmentation has been identified for substrates with appropriate functionality adjacent to the strained ring system. The substrate scope and stereochemical outcome of the acid-mediated fragmentation are complementary to the thermal ring expansions, particularly in the case of the bicyclo[5.3.0]decanes.     

Synthesis and properties of cyclic diester based aliphatic copolyesters

Melt polycondensation was used to prepare a systematic series of random and amorphous copolyesters using the following cycloaliphatic diesters: dimethyl‐1,4‐cyclohexane dicarboxylate (DMCD), dimethyl bicyclo[2.2.1]heptane‐1,4‐dicarboxylate (DMCD‐1), dimethyl bicyclo[2.2.2]octane‐1,4‐dicarboxylate (DMCD‐2), dimethyl bicyclo[3.2.2]nonane‐1,5‐dicarboxylate (DMCD‐3), 1,4‐dimethoxycarbonyl‐1,4‐dimethylcyclohexane (DMCD‐M) and the aliphatic diols: ethylene glycol (EG) and 1,4‐cyclohexane dimethanol (CHDM). The polymer compositions were determined by nuclear magnetic resonance (NMR) and the molecular weights were determined using size exclusion chromatography (SEC). The polyesters were characterized by dynamic mechanical analysis (DMA), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The copolyester based on DMCD‐2 was observed to have a higher glass transition temperature (T_g up to 115 °C) than the other copolyesters of this study. For poly[x(DMCD‐2)y(DMCD) 30(EG)70(CHDM)], T_g increases linearly with increase of DMCD‐2 mole content. DMA showed that all of the cycloaliphatic copolyesters have secondary relaxations, resulting from the conformational transitions of the cyclohexylene rings. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2162–2169, 2010     

Synthesis of 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane, 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane, and 2-(pyridin-3-yl)-1-azabicyclo[3.2.1]octane, a class of potent nicotinic acetylcholine receptor-ligands

In an attempt to generate nicotinic acetylcholine receptor (nAChR) ligands selective for the alpha4beta2 and alpha7 subtype receptors we designed and synthesized constrained versions of anabasine, a naturally occurring nAChR ligand. 2-(Pyridin-3-yl)-1-azabicyclo[2.2.2]octane, 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane, and several of their derivatives have been synthesized in both an enantioselective and a racemic manner utilizing the same basic synthetic approach. For the racemic synthesis, alkylation of N-(diphenylmethylene)-1-(pyridin-3-yl)methanamine with the appropriate bromoalkyltetrahydropyran gave intermediates which were readily elaborated into 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane and 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane via a ring opening/aminocyclization sequence. An alternate synthesis of 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane via the alkylation of N-(1-(pyridin-3-ylethylidene)propan-2-amine has also been achieved. The enantioselective syntheses followed the same general scheme, but utilized imines derived from (+)- and (-)-2-hydroxy-3-pinanone. Chiral HPLC shows that the desired compounds were synthesized in >99.5% ee. X-ray crystallography was subsequently used to unambiguously characterize these stereochemically pure nAChR ligands. All compounds synthesized exhibited high affinity for the alpha4beta2 nAChR subtype ( K i < or = 0.5-15 nM), a subset bound with high affinity for the alpha7 receptor subtype ( K i < or = 110 nM), selectivity over the alpha3beta4 (ganglion) receptor subtype was seen within the 2-(pyridin-3-yl)-1-azabicyclo[2.2.2]octane series and for the muscle (alpha1betagammadelta) subtype in the 2-(pyridin-3-yl)-1-azabicyclo[3.2.2]nonane series.     

Thermotropic copolyesters. III. Synthesis and characterization of liquid crystal copolyesters containing the bicyclo[2.2.2]octane ring system

A number of thermotropic copolyesters which contain the bicylo[2.2.2]octane ring system have been synthesized. Because of the stiffening effect of the bicyclo[2.2.2]octane group on the chain, the sebacoyl spacer was used to obtain meltable compositions.     

Synthesis and characterization of poly(benzazoles) containing the bicyclo[2.2.2]octane moiety

Poly(benzobisoxazoles) (PBOs), poly(benzobisthiazoles) (PBTs) and copolymers thereof containing the 2,5-dihydroxybicyclo[2.2.2]octane moiety have been prepared and studied. The homopolymers were synthesized by the polycondensation of 2,5-dihydroxybicyclo[2.2.2]octane-1,4-dicarboxylic acid with 4,6-diamino-1,3-benzenediol dihydrochloride or 2,5-diamino-1,4-benzenedithiol dihydrochloride in poly(phosphoric acid). Random and block copolymers (PBO–PBT) were also prepared. The polymers were characterized by solubility, X-ray diffraction, spectroscopy (infrared and solid-state ¹³C nuclear magnetic resonance), and thermal analysis such as differential scanning calorimetry and thermogravimetric analysis. Thermogravimetric analysis showed thermal stability of the polymers above 375°C in air and under argon atmosphere. The polymers exhibited high resistance to organic and inorganic solvents. The polymers were converted to the more stable aromatic polymers via dehydration and retro Diels–Alder reactions of the 2,5-dihydroxybicyclo[2.2.2]octyl moiety by pyrolysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 277–281, 1998     

Synthesis of bicyclo[2.2.2]octane-2,3,5,6,7,8 hexols (Bishomoinositols) as glycosidase inhibitors

For the construction of the bicyclo[2.2.2]octane skeleton, 2,2-dimethyl-3a,7a-dihydro-1,3-benzodioxole was reacted with vinylene carbonate to give two isomeric cycloadditon products having the bicyclo[2.2.2]octane skeleton. Hydrolysis of the ketal ring and the opening of the carbonate functionality, followed by hydroxylation of the remaining double bond resulted in the formation of a symmetrical hexol. Epoxidation of the double bond in the cycloaddition products and the subsequent ring-opening reactions produce two additional hexol derivatives. One of the synthesized molecules exhibited enzyme-specific inhibition against alpha-glycosidase.     

Novel bicyclo[2.2.2]octanyl-1,4-benzodiazepinones. Their syntheses and rearrangement to bicyclooct-2-enylbenzimidazoles

The synthesis of the novel bicyclo[2.2.2]octanyl[1,4]benzodiazepinone ring system (IV) and its facile acid catalysed rearrangement to the corresponding bicyclo[2.2.2]oct-2-enylbenzirnid-azole system (IX) is described.     

Michael reaction on example of unsaturated ketones of bicyclo[3.3.1]nonane series

Conclusions The reaction of bicyclo[3.3.1]-3,7-nonadiene-2,6-dione with nitromethane under the conditions of the Michael reaction in ether solution proceeds with the formation of 2,6-bis(nitromethyl)bicyclo[3.3.1]-nonane-4,8-dione, while in methanol this reaction leads to the formation of a derivative with the bicyclo[2.2.2]octane structure, specifically 3-carbomethoxymethyl-2-nitrobicyclo[2.2.2]-5-octanone.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2624–2626, November, 1981.The authors thank Yu. T. Struchkova, A. I. Akhmedova, and A. I. Yanovskii for running the x-ray structure analysis.     

Asymmetric addition of pyridine to 1,4-bis(ethynyl)bicyclo[2.2.2]octane: dissymmetrical rotator ligands illustrated in dpppPt(II) and [Re6Se8]2+ complexes and an amphidynamic hydrogen bonded framework solid

A polar function like pyridine increases the polarity difference between mono- and disubstituted 1,4-bis(trimethylsilylethynyl)bicyclo[2.2.2]octane cores allowing for their ready separation by chromatography, affording two dissymmetrical ligands illustrated in metal-rotor hybrids like a corner-shaped mononuclear complex, an octahedral hexanuclear metal complex, and a framework solid with a rather slow rotator.     

Carbon-13 chemical shifts of bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane derivatives

¹³C chemical shifts of more than fifty bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane derivatives (hydrocarbons, alcohols, ketones and esters) have been determined. The usefulness of ethyl derivatives for the assignment of close ¹³C chemical shifts in bicyclic methyl derivatives is shown both for the bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane series. Comparison of substituent effects on α-, β-, γ- and δ-carbons in both series of compounds shows remarkable differences in steric interactions. In contrast to the rigid bicyclo[2.2.1]heptane system, both chair and boat conformations can be predominant in the bicyclo[3.2.1]octane series with the conformationally flexible 6-membered ring.     

Equilibrium polymerization behavior in the cationic single ring‐opening polymerization of bicyclo orthoesters

The synthesis and cationic polymerization of the following bicyclo orthoesters were examined: 4‐ethyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 1,4‐diethyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 4‐ethyl‐1‐phenyl‐2,6,7‐trioxabicyclo[2.2.2]octane, 4‐ethyl‐1‐(4‐methoxyphenyl)‐2,6,7‐trioxabicyclo[2.2.2]octane, and 4‐ethyl‐1‐(4‐nitrophenyl)‐2,6,7‐ trioxabicyclo[2.2.2]octane. All the monomers underwent equilibrium polymerization, which was confirmed by the relationships between the polymerization temperature and monomer conversion. The obtained polymers afforded the original monomers via an acid‐catalyst treatment with a low reagent concentration in CH₂Cl₂ at 20 °C. The equilibrium monomer concentration was constant, regardless of the initial reagent concentration, in both polymerization and depolymerization. The bicyclo orthoesters with a bulky and electron‐withdrawing substituent showed a larger equilibrium monomer concentration. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3159–3167, 2001     

Two 3D Rubidium Halide Organic–Inorganic Hybrid Perovskite Ferroelectrics Templated by Quasi-Spherical Organic Amine 1,4-Diazabicyclo[3.2.2]nonane

The emergence of (CH₃NH₃)PbI₃ has brought the development of three-dimensional (3D) organic-inorganic hybrid perovskite (OIHP) structures with ABX₃ type to a higher level; however, most 3D frameworks are constructed by corner-sharing of BX₆ octahedra. Herein, we substituted the spherical molecule 1,4-diazabicyclo[2.2.2]octane (2.2.2-dabco) with 1,4-diazabicyclo[3.2.2]nonane (1,4-3.2.2-dabcn) as a template to react with RbX (X=Br, I) in the corresponding HX acids under the consideration of reducing the molecular symmetry. Two 3D OIHP compounds [1,4-3.2.2-H₂dabcn]RbI₃⋅H₂O ( 1 ) and [1,4-3.2.2-H₂dabcn]RbBr₃ ( 2 ) crystallized in non-centrosymmetric point group mm2 before the phase transition point were isolated. Among them, the 3D inorganic framework of 1 is constructed by sharing the corner of [RbI₆] octahedra, while that of 2 is constructed by sharing the corner and face of [RbBr₆] octahedra to acquire large cavities to accommodate the organic amine cation [1,4-3.2.2-H₂dabcn]²⁺; this 3D framework type is unprecedented in the OIHPs. As expected, compounds 1 and 2 exhibit reversible phase transition, dielectric and second harmonic generation (SHG) and ferroelectric properties, in which the phase transition temperature of 2 at 374 K is much higher than compound 1 at 280 K.     

The electronic structure of bicyclo [2.2.1] heptane and of bicyclo [2.2.2] octane

An ab initia SCF-LCAO-MO study of bicyclo [2.2.1] heptane(I) and of bicyclo [2.2.2] octane(II) has been performed. The electronic structure and the nature of the molecular orbitals and of the bonds have been analyzed. Interactions between fragment orbitals may be recognized. The bridgehead C-H bonds interact dominantly “through-space” in I and “through-bond” in II. Some relations between electronic structure and molecular properties are discussed.     

Substituent effects on the acidity of weak acids. 1. Bicyclo[2.2.2]octane-1-carboxylic acids and bicyclo[1.1.1]pentane-1-carboxylic acids

The acidities of 3- and 4-substituted bicyclooctane-1-carboxylic acids and 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids have been calculated at the MP2/6-311++G** theoretical level. There is good agreement between the calculated and observed gas-phase acidities. The acidities of the 4-substituted bicyclooctane acids were found to be linearly dependent on the C-X bond dipoles, as expected from a field effect. The substituents had a negligible effect on the electron density at C1. The difference in acidity between 4-chlorobicyclo[2.2.2]octane-1-carboxylic acid and the parent acid (6.2 kcal/mol) is reproduced by the Kirkwood-Westheimer treatment of substituent effects on acidity, but only if the bicyclooctane ring is given an effective dielectric constant of unity. The acidities of the 3-substituted bicyclooctane acids are linearly related to the corresponding 4-substituted acids with a slope of 0.9. The acidities of the 3-substituted bicyclo[1.1.1]pentane-1-carboxylic acids are linearly related to the C-X bond dipoles for this ring system (which are different than those for the bicyclooctanes), and they are also linearly related to the acidity of the 4-substituted bicyclo[2.2.2]octanecarboxylic acids with a slope of 1.34. The larger slope is due to the smaller bridgehead-bridgehead distance in the bicyclopentane ring than in bicyclo[2.2.2]octane.     

Determination de la configuration absolue de quelques derives du bicyclo[2.2.2]octane: Utilisation comparee de la regle des octants et de la methode d'horeau

A series of bicyclo[2.2.2]octane derivatives whose absolute configurations are known through chemical correlations with confirmed reference products (bicyclo[2.2.2]octanol, bicyclo[2.2.2]octene carboxylic acid) have been prepared.     

Novel self-assembled monolayers of disulfides with bicyclo[2.2.2]octane moieties of Au(111)

A series of disulfides containing bicyclo[2.2.2]octane moieties have been synthesised and their self-assembled monolayers (SAMs) on Au(111) have been characterized using scanning tunnelling microscopy (STM).