Solvatochromism and solvation of transition metal complexes in ternary aqueous solvent media

The solvatochromic behaviour of a range of inorganic complexes, particularly iron(II)-cyanide-diimine species, is documented for a variety of ternary aqueous solvent media and the patterns observed discussed in terms of their solvation properties.     

Guanidinate and amidopyridinate rare-earth complexes: Towards highly reactive alkyl and hydrido species

The review summarizes advances in the chemistry of organo rare-earth complexes containing bulky guanidinate and amidopyridinate ligands. The methods of synthesis, structures, reactivities and catalytic activities of various types of alkyl and hydrido complexes and their precursors are considered.     

Spin exchange between transition metal complexes and nitroxyl radicals in nonaqueous media

New complexes of diaza- and tetraaza-containing crown ethers, viz., 1,10-diaza-18-crown-6 (1), 1,4,8,12-tetraazacyclopentadecane (2), 1,4,8,11-tetraazacyclotetradecane (3), and 1,4,8,11-tetraazacyclotetradecane 1,4,8,11-tetrachloride tetraacetic acid tetrahydrate (4), with the divalent copper and nickel ions and the Cl^–, Br^–, ClO₄ ^–, NO₃ ^–, and AcO^– counterions were synthesized. The exchange interactions of these compounds and paramagnetic copper and nickel salts with the TEMPO radical in MeOH—CHCl₃ binary mixtures of different compositions were studied. The plots of the linewidths of the hyperfine coupling components of TEMPO vs. concentration of the ions and temperature show that the frequency of diffusion collisions is the rate-limiting step for spin exchange (strong exchange regime). A strong dependence of the exchange rate constant (k _ex) on the crown ether and counterion structure was found. The isotropic hyperfine coupling constants (a _Cu) and g factors (g _i ) were measured for the Cu^II complexes with the crown ethers. In the case of the crown ether complexes 1—3 with CuCl₂, the a _Cu constant decreases linearly with an increase in g _i = g _i – 2.0023 in the series 3 < 2 < 1, whereas k _ex increases linearly in the same series with a decrease in the contact HFC on the Cu^II nucleus (K) and a decrease in covalence of bonding. For the complexes of 2 with Cu^II and different axial ligands (counterions), k _ex increases in the series Cl^– < ClO₄ ^– AcO^– Br^–; < NO₃ ^–. In the case of the complexes of 2 with NiCl₂, k _ex increases in the series 1 < 4 < 3 2. For the Cu^II and Ni^II salts with the Cl^–, ClO₄ ^–, and NO₃ ^– anions, the k _ex values are almost independent of the anion nature. The correlation of the k _ex values with the electron-spin parameters of the complexes is discussed.     

Sonochemical syntheses of xanthene derivatives using zeolite-supported transition metal catalysts in aqueous media

An efficient green method for the syntheses of biologically active xanthene derivatives by use of zeolite-supported transition metal catalysts is described. A Fe-Cu/ZSM-5 heterogeneous catalyst has the highest activity in the one-pot syntheses with a wide range of aldehydes and cyclic 1,3-diketones, under ultrasonic irradiation in water at ambient temperatures. The three-component condensation in the presence of supported metal catalysts is operationally simple, requires no expensive or toxic reagents, and gives high yields in short reaction times.     

Hydrogen-atom transfer from transition metal hydroperoxides, hydrogen peroxide, and alkyl hydroperoxides to superoxo and oxo metal complexes

Superoxochromium(III) complexes L(H2O)CrOO2+ (L = (H2O)4 and 1,4,8,11-tetraazacyclotetradecane) oxidize hydroperoxo complexes of rhodium and cobalt in an apparent hydrogen-atom transfer process, i.e., L(H2O)CrOO2+ + L(H2O)RhOOH2+ --> L(H2O)CrOOH2+ + L(H2O)RhOO2+. All of the measured rate constants fall in a narrow range, 17-135 M-1 s-1. These values are about 2.5-3.0 times smaller in D2O, where the hydroperoxo hydrogen is replaced by deuterium, and coordinated molecules of water by D2O. The failure of the back reaction to take place in the available concentration range places the O-H bond dissociation energy in RhOO-H2+ at or=80 kJ/mol) in the driving force for the two types of reactions. A chromyl ion, CrIVaqO2+, oxidizes L(H2O)RhOOH2+ and the cobalt analogs to the corresponding superoxo complexes. The rate constants are approximately 102-fold larger than those for the oxidation by CraqOO2+. The oxidation of tert-BuOOH by CrIVaqO2+ has k = 160 M-1 s-1 and exhibits an isotope effect kBuOOH/kBuOOD = 12. Hydrogen atom transfer from H2O2 to CraqOO2+ is slow, k approximately 10-3 M-1 s-1.     

Divalent transition metal complexes

4-(4-ethoxy-phenylhydrazono)-1-phenyl-3-methyl-1H-pyrazolin-5(4H)-one (5a) (H-EMPhP) as ligand and its Cu(II), Co(II) and Ni(II) complexes 4(a-c) were synthesized and characterized by their thermal and spectral properties. The azocoupling product (H-EMPhP), able of azo-hydrazone tautomerism 5(a-d), act as a bidentate ligand involving in coordination the azogroup nitrogen of its common anion (7) and the oxygen atom that is bound to the pyrazole ring of the mentioned anion (7).     

Polynuclear transition metal complexes with thiocarbohydrazide and dithiocarbamates

Sn(tch)2{MCl2}2 was prepared from the precursor Sn(tch)2 and MCl2. It was subsequently allowed to react with diethyldithiocarbamate which yielded the trinuclear complexes of the type Sn(tch)2{M2(dtc)4}, where tch=thiocarbohydrazide, M=Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and dtc=diethyldithiocarbamate. They were characterized on the basis of microanalytical, thermal (TGA/DSC), spectral (IR, UV-vis, EPR, (1)H NMR) studies, conductivity measurement and magnetic moment data. On the basis of spectral data a tetrahedral geometry has been proposed for the halide complexes, Sn(tch)2{MCl2}2 except for Cu(II) which exhibits a square planar coordination although the transition metal ion in Sn(tch)2{M2(dtc)4} achieves an octahedral geometry where the dithiocarbamato moiety acts as a symmetrical bidentate ligand. The bidentate nature has been established by the appearance of a sharp single nu(C-S) around 1000 cm(-1). A downfield shift observed in NH(a) and NH(b) protons on moving from Sn(tch)2 to Sn(tch)2{MCl2}2 is due to the drift of electrons toward metal atoms. A two-step pyrolysis has been observed in the Sn(tch)2{MCl2}2 complexes while their dithiocarbamato derivatives exhibit a three-stage degradation pattern. Finally, the in vitro antibacterial activity of Sn(tch)2{M2(dtc)4} and the mononuclear Sn(tch)2 has been carried out on bacterial strains Escherichia coli and Salmonella typhi. The compounds were found to be active against the test organisms. The activity of the complexes is enhanced with increasing concentration. The maximum activity in both the strains was achieved by cobalt(II) dithiocarbamate complex. Minimum activity was found for Sn(tch)2 which generally increases with the introduction of transition metal ion in the complex.     

Agostic interactions in d0 metal alkyl complexes

The phenomenon of agostic interactions is reviewed and the nature of the interaction is revisited. A historical perspective is followed by an overview of experimental techniques used to diagnose agostic behavior, and previous interpretations of agostic bonding are presented. A series of simple metal alkyl complexes is considered and a new model for the phenomenon in d(0) systems is developed which sets them apart from agostic late-transition-metal complexes. Factors such as the valence electron count and coordination number of the metal center are revealed to be unimportant in facilitating the interaction in most d(0) systems. The charge density distribution in several transition-metal alkyl complexes is explored by experimental and theoretical techniques, including the powerful "Atoms in Molecules" approach. Local charge concentrations are shown to play an important role in the agostic interaction. Finally, we demonstrate for the first time a way to manipulate and control the magnitude and disposition of such local charge concentrations, and hence the strength of agostic interactions in d(0) metal alkyl complexes.     

New bis-macrocyclic complexes with transition metal ions

Template condensation of benzidine, formaldehyde, ethylenediamine or 1,3-diaminopropane, metal salt and 1-phenyl-1,3-butanedione or 2,3-butanedione in a 1:4:2:2 molar ratio results in the formation of two new series of binuclear pentaaza macrocyclic complexes: dichloro[1,1-phenylbis(7-methyl-9-phenyl-1,3,6,10,13-pentaazacyclotetradeca-6,9-diene) metal(II)], [M₂LCl₄] (M = Co^II, Cu^II, Fe^III and Zn^II) and dichloro[1,1-phenylbis(8,9-dimethyl-1,3,7,10,14-pentaazacyclopentadeca-7,9-diene) metal(II)], [M₂LCl₄] (M = Ni^II, Co^II, Cu^II and Cd^II). Both series were characterized by i.r., ¹H-n.m.r., u.v.–vis. spectral studies, conductivity and magnetic susceptibility measurements.     

Some transition metal nitrate complexes with hexamethylenetetramine

Three hexamethylenetetramine (HMTA) metal nitrate complexes such as [M(H₂O)₄(H₂O-HMTA)₂](NO₃)·4H₂O (where M=Co, Ni and Zn) have been prepared and characterized by X-ray crystallography. Their thermal decomposition have been studied by using dynamic, isothermal thermogravimery (TG) and differential thermal analysis (DTA). Kinetics of thermal decomposition was undertaken by applying model-fitting as well as isoconversional methods. The possible pathways of thermolysis have also been proposed. Ignition delay measurements have been carried out to investigate the response of these complexes under condition of rapid heating.     

New cationic group 4 metal alkyl complexes

Cationic group 4 metal alkyl complexes containing tetradentate Schiff base ligands, (acen) Zr(R)⁺ and (F6-acen) Zr(R)⁺, are prepared by protonolysis of suitable neutral dialkyl precursors. These complexes display electrophilic behavior and are moderately active ethylene polymerization catalysts in the presence of 1 molar equivalent of AlR₃.     

Polyoxometalate tri-supported transition metal complexes containing mixed-valent transition metal ions

Three compounds, [AsMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·4H₂O (1), [PMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·3H₂O (2) and [PMo₈V₆O₄₂][Cu(2,2?-bpy)₂]₂[Cu(2,2?-bpy)]·3.5H₂O (3), have been synthesized under hydrothermal conditions and characterized by IR, UV–vis, XRD, TG, elemental analysis, and X-ray diffraction analysis. Single-crystal X-ray structure analysis reveals that 1 and 2 are isostructural and isomorphous, whereas 2 and 3 are polymorphs. Polymorphs of 1 have not been synthesized yet. The mixed-valent transition metal ion in 1–3 has been further confirmed by TG analyses. Catalytic properties of 1 and 2 have also been studied.     

Heterotrimetallic and heterotetrametallic transition metal complexes

The synthesis of the ruthenium σ-acetylides (η⁵-C₅H₅)L₂Ru-CC-bipy (4a, L = PPh₃; 4b, L₂ = dppf; bipy = 2,2′-bipyridine-5-yl; dppf = 1,1′-bis(diphenylphosphino)ferrocene) is possible by the reaction of [(η⁵-C₅H₅)L₂RuCl] (1) with 5-ethynyl-2,2′-bipyridine (2a) in the presence of NH₄PF₆ followed by deprotonation with DBU. Heterobimetallic Fc-CC-NCN-Pt-CC-R (10a, R = bipy; 10b, R = C₅H₄N-4; Fc = (η⁵-C₅H₅)(η⁵-C₅H₄)Fe; NCN = [1,4-C₆H₂(CH₂NMe₂)₂-2,6]⁻) is accessible by the metathesis of Fc-CC-NCN-PtCl (9) with lithium acetylides LiCC-R (2a, R = bipy; 2b, R = C₅H₄N-4).The complexation behavior of 4a and 4b was investigated.Treatment of these molecules with [MnBr(CO)₅] (13) and {[Ti](μ-σ,π-CCSiMe₃)₂}MX (15a, MX = Cu(NCMe)PF₆; 15b, MX = Cu(NCMe)BF₄; 16, MX = AgOClO₃; [Ti] = (η⁵-C₅H₄SiMe₃)₂Ti), respectively, gave the heteromultimetallic transition metal complexes (η⁵- C₅H₅)L₂Ru-CC-bipy[Mn(CO)₃Br] (14a: L = PPh₃; 14b: L₂ = dppf) and [(η⁵-C₅H₅)L₂Ru-CC-bipy{[Ti](μ-σ,π-CCSiMe₃)₂}M]X (17a: L = PPh₃, M = Cu, X = BF₄; 17b: L₂ = dppf, M = Cu, X = PF₆; 18a: L = PPh₃, M = Ag, X = ClO₄; 18b: L₂ = dppf, M = Ag, X = ClO₄) in which the appropriate transition metals are bridged by carbon-rich connectivities.The solid-state structures of 4b, 10b, 12 and 17b are reported. The main structural feature of 10b is the square-planar-surrounded platinum(II) ion and its linear arrangement. In complex 12 the N-atom of the pendant pyridine unit coordinates to a [mer,trans-(NN′N)RuCl₂] (NN′N = 2,6-bis-[(dimethylamino)methyl]pyridine) complex fragment, resulting in a distorted octahedral environment at the Ru(II) centre. In 4b a 1,1′-bis(diphenylphosphino)ferrocene building block is coordinated to a cyclopentadienylruthenium-σ-acetylide fragment. Heterotetrametallic 17b contains a (η⁵-C₅H₅)(dppf)Ru-CC-bipy unit, the bipyridine entity of which is chelate-bonded to [{[Ti](μ-σ,π-CCSiMe₃)₂}Cu]⁺. Within this arrangement copper(I) is tetra-coordinated and hence, possesses a pseudo-tetrahedral coordination sphere.The electrochemical behavior of 4, 10b, 12, 17 and 18 is discussed. As typical for these molecules, reversible oxidation processes are found for the iron(II) and ruthenium(II) ions. The attachment of copper(I) or silver(I) building blocks at the bipyridine moiety as given in complexes 17 and 18 complicates the oxidation of ruthenium and consequently the reduction of the group-11 metals is made more difficult, indicating an interaction over the organic bridging units.The above described complexes add to the so far only less investigated class of compounds of heteromultimetallic carbon-rich transition metal compounds.     

Polytypic phase transition in alkyl chain-functionalized valence tautomeric complexes

A novel series of valence tautomeric (VT) complexes, [Co(Cnbpy)(3,5-DTBQ)2] (Cnbpy = 4,4'-dialkyl-2,2'-bipyridine (alkyl = (C(n)H(2n+1)) where n = 0 (CoC0bpy), 1 (CoC1bpy), 5 (CoC5bpy), 9 (CoC9bpy) and 13 (CoC13bpy); 3,5-DTBQ = 3,5-di-tert-butylsemiquinonate or catecholate), including two previously reported complexes (CoC0bpy and CoC1bpy), were systematically prepared and their properties examined. Introduction of alkyl groups into VT chromophores leads to unexpected variations in the VT process, depending on the lengths of the alkyl chains. An even more interesting observation is that significant polytypic phase transitions with crystallographic symmetry changes accompanying the abrupt VT conversion are induced for the first time in CoC9bpy and CoC13bpy.     

Rigid ferrocenophane and its metal complexes with transition and alkaline-earth metal ions

The rigid [6]ferrocenophane, L¹, was synthesised by condensation of 1,1′-ferrocene dicarbaldehyde with trans-1,2-diaminocyclohexane in high dilution at r.t. followed by reduction. When other experimental conditions were employed, the [6,6,6]ferrocenephane (L²) was also obtained. Both compounds were characterised by single crystal X-ray crystallography. The protonation of L¹ and its metal complexation were evaluated by the effect on the electron-transfer process of the ferrocene (fc) unit of L¹ using cyclic voltammetry (CV) and square wave voltammetry (SWV) in anhydrous CH₃CN solution and in 0.1 M ⁿBu₄NPF₆ as the supporting electrolyte. The electrochemical process of L¹ between −300 and 900 mV is complicated by amine oxidation. On the other hand, an anodic shift from the fc/fc⁺ wave of L¹ of 249, 225, 81 and 61 mV was observed by formation of Zn²⁺, Ni²⁺, Pd²⁺ and Cu²⁺ complexes, respectively. Whereas Mg²⁺ and Ca²⁺ only have with L¹ weak interactions and they promote the acid-base equilibrium of L¹. This reveals that L¹ is an interesting molecular redox sensor for detection of Zn²⁺ and Ni²⁺, although the kinetics of the Zn²⁺ complex formation is much faster than that of the Ni²⁺ one. The X-ray crystal structure of [PdL¹Cl₂] was determined and showed a square–planar environment with Pd(II) and Fe(II) centres separated by 3.781(1) Å. The experimental anodic shifts were elucidated by DFT calculations on the [ML¹Cl₂] series and they are related to the nature of the HOMO of these complexes and a four-electron, two-orbital interaction.     

Bridging vinylalkylidene transition metal complexes

Vinylalkylidene transition metal complexes have been extensively used as ‘multitalent tools’ in organic synthesis, covering a broad field of applications. The vinylalkylidene ligands can be monodentate; alternatively they can adopt a bridging coordination mode in complexes with two adjacent metal atoms. As for other unsaturated organic ligands which can bond in both mono- and di-nuclear modes, the bridging coordination can give rise to new and different chemical properties from those found when the ligand is bound to a single metal centre. Likewise, the synthetic routes to bridging vinylalkylidene complexes offer a broader range of possibilities compared to those used to make mononuclear vinylalkylidenes. In spite of the fact that bridging vinylalkylidene complexes have been known for about 40 years, their synthetic potential as C₃ activated fragments has so far been under-exploited. Comparison with other C₃ bridged ligands (allenyls and allyls) indicates that vinylalkylidene ligands are reactive and versatile species. This review article gives an overview of the chemistry of bridging vinylalkylidene complexes to focus attention on their potential as synthetic tools.     

Fluorenone hydrazine-S-benzyldithiocarbazate transition metal complexes

Summary New Cu^II, Co^II, Ni^II, Cd^II, Zn^II, Hg^II, Pd^II and UO ₂ ^II complexes of the Schiff base ligand (FBz) formed by condensation of fluorenone withS-benzyldithiocarbazate have been prepared and characterized by elemental analysis, magnetic and spectroscopic measurements. The Cu(FBz)₂(Cl)₂ complex is paramagnetic. The Ni(FBz-H)₂ complex is diamagnetic, four-coordinate and square planar. The Co^II ion is oxidized in the presence of the Schiff base with the concomitant formation of Co^III complex of empirical formulae Co(FBz)Cl₃OH₂. The ligand was tested as a corrosion inhibitor for copper. Inhibition efficiency was calculated and the limiting concentration of FBz to give maximum efficiency was 10^–3 mol dm^–3 at 25°C. The polarographic reduction of FBz was investigated in Britton-Robinson buffer solutions of pH 3–10. The polarograms at dme indicated that the depolarizer is reduced through two two-electron irreversible diffusion-controlled waves. The mechanistic pathway of the electrode reaction is commensurate with this result.     

New vic-dioxime transition metal complexes

New vic-dioxime ligands and their Cu^II, Co^III, Ni^II and VO^IV complexes have been prepared and characterized by elemental analyses, i.r. and u.v. spectra, magnetic moments and molar conductance data. The Co^III complexes are diamagnetic. The ¹H- and ¹³C-n.m.r. and g.c./m.s. spectra of the vic-dioxime ligands and their Co^III complexes were recorded. The compounds are all non-electrolytes.     

Bimacrocyclic NHC transition metal complexes

The preparation of seven concave NHC metal complexes derived from bimacrocyclic imidazolinium salt 1 is reported. The silver complex 2, obtained in 86% yield by reacting 1 with silver(I) oxide, was used to give copper complex 3, rhodium complex 5 and iridium complex 6 by transmetalation in good yields. Palladium complex 4 was obtained by reaction of the azolium salt 1 with palladium dichloride in 3-chloropyridine. The rhodium and iridium dicarbonyl complexes 7 and 8 were prepared via ligand exchange from the COD complexes 5 and 6. Silver complex 2, copper complex 3 and palladium complex 4 were characterized by single-crystal X-ray analysis. Silver complex 2 and copper complex 3 were tested in the cyclopropanation of styrene and indene with EDA (ethyl diazoacetate), where good results were obtained with 3, while low conversion and catalyst decomposition was observed with 2.