Pulsed microchip laser induced fluorescence for in situ tracer experiments

A compact system for remote and non intrusive in situ analysis of fluorescent tracers using a newly developed pulsed microchip laser coupled to fiber optics was used for in situ rhodamine determinations. By using a crystal doubling in front of the microchip Nd-YAG laser, it is possible to obtain 532 nm at 5 kHz with an energy of 0.6 μJ in a 0.5 ns pulse. Using fiber optics and a passive optode, it was possible to analyze remotely the fluorescence of rhodamine with a compact detection system (monochromator and photomultiplier). Limits of detection down to 10^–10–10^–11 mol/L can be reached depending on the rhodamine studied. Such a laser can be directly implanted in the optode avoiding laser losses when exciting in the U.V. Received: 30 July 1997 / Revised: 6 October 1997 / Accepted: 10 October 1997     

Vermiculite clay mineral as an effective carbon paste electrode modifier for the preconcentration and voltammetric determination of Hg(II) and Ag(I) ions

A vermiculite modified carbon paste electrode (VMCPE) was employed for the in situ preconcentration of traces of Hg(II) and Ag(I) via an ion-exchange route. Heavy metal ions were accumulated in Britton-Robinson (BR) buffer pH 7 for Hg(II) and pH 6 for Ag(I), and afterwards reduced at –0.7 V vs. Ag/AgCl in the separate measurement solution (BR buffer pH 5 + 0.05 mol/L NaNO₃) prior to the anodic stripping square-wave voltammetric (ASSWV) detection. For Hg(II) ions, at 15 min accumulation, a linear range from 1.0 × 10^–7 to 8.0 × 10^–6 mol/L was obtained, with a 5.7 × 10^–8 mol/L limit of detection. The VMCPE response was linear for Ag(I) ions in the concentration range from 2.0 × 10^–7 to 8.0 × 10^–6 mol/L, at 10 min accumulation with a corresponding limit of detection of 6.3 × 10^–8 mol/L. The relative standard deviation of the analytical procedure including accumulation from a 5 × 10^–7 mol/L solution of Hg (15 min) or Ag(I) (10 min), electrolysis, ASSWV detection, regeneration and activation of the VMCPE, was 4% (n = 6). The optimisation of the parameters for the application of the VMCPE in combination with ASSWV detection is presented and discussed. Received: 10 July 1997 / Revised: 31 October 1997 / Accepted: 3 November 1997     

Flow injection on-line sorption preconcentration of platinum in a knotted reactor coupled with electrothermal atomic absorption spectrometry

A flow injection on-line sorption preconcentration method for the electrothermal AAS determination of platinum has been developed. The pyrrolidine dithiocarbamate complexes of either Pt⁴⁺ or Pt²⁺, formed in 0.7 mol L^–1 HNO₃, are on-line adsorbed on the inner walls of a PTFE knotted reactor and subsequently eluted with methanol. An enhancement factor of 112 and a detection limit (3 σ) of 10 ng L^–1 along with a sampling frequency of 21 h^–1 are achieved with a 90 s preconcentration time at a sample flow rate of 8.8 mL min^–1. The relative standard deviation is 2.5% for 0.4 μg L^–1 Pt. The method has been applied to the determination of platinum in blood samples. Received: 6 October 1997 / Revised: 26 November 1997 / Accepted: 3 December 1997     

Design and characteristics of tin (II) optode based on immobilization of dithizone on a triacetylcellulose membrane and its application in canned foods

Abstract  

The characterization of an optical sensor membrane is described for the determination of tin (II) based on the immobilization of dithizone on a triacetylcellulose membrane. The membrane responds to tin (II) ions by changing color reversibly from green to red in buffer solution at pH 6 and wavelength 611 nm. This optode has a linear range of 0.3–6.33 μg cm⁻³ (2.52–53.32 μmol dm⁻³) of Sn²⁺ ions with a limit of detection of 0.15 μg cm⁻³ (1.26 μmol dm⁻³). The response time of the optode was about 8–10 min depending on the concentration of Sn²⁺ ions. The selectivity of the optode to tin (II) ions at pH 6 was good. The sensor can be readily regenerated by exposure with EDTA solution. The color is fully reversible, and the optical sensor could be fully regenerated. Experimental results showed that the optode could be used as an effective tool in analyzing the tin content in canned foods.     

Speciation of arsenic(V) and arsenic(III) by cathodic stripping voltammetry in fresh water samples

A voltammetric stripping procedure is described for the determination of arsenic(V) in a mannitol-sulphuric acid medium. The arsenic is coprecipitated with copper and selenium and reduced to arsine at the hanging mercury drop electrode. Using an accumulation time of 240 s, the detection limit is 0.52 μg L^–1, the determination limit is 0.9 μg L^–1. The method has been applied to the determination of arsenic in water samples. By varying the composition of the supporting electrolyte it is possible to differentiate between arsenic(III) and arsenic(V). As both oxidation states have different toxicological characteristics, the ability to discriminate between both is an distinct advantage of the proposed method. Received: 25 October 1996 / Revised: 7 February 1997 / Accepted: 12 February 1997     

Determination of naturally occurring radionuclides in ultrapure organic liquids

For the determination of trace elements in organic liquids radiochemical neutron activation analysis has been combined with counting methods geared to various decay modes of indicator radionuclides leading to a high sensitivity required for ultrapure samples. The activation parameters such as irradiation time, sample mass and neutron flux have been enlarged to the maximum possible in the available irradiation facility. Separation yields and adsorption losses have been studied in detail for a set of elements in order to rule out losses during the separation process. The attainable limits of detection are 2 · 10^–16g/g for U and Lu, in the 5 · 10^–15g/g range for Th and Sm, in the 1 · 10^–14g/g region for La, 5 · 10^–13g/g for Rb, Cd and 2 · 10^–12g/g for K and In. Although the analysis focused on traces of naturally occurring radioisotopes, results for Cr, Fe, W and Zn are presented as well. Received: 14 May 1997 / Revised: 28 August 1997 / Accepted: 9 September 1997     

Integrated microfluidic device for the separation and electrochemical detection of catechol estrogen-derived DNA adducts

Catechol estrogen-derived DNA adducts are formed as a result of the reaction of catechol estrogen metabolites (e.g., catechol estrogen quinones) with DNA to form depurinating adducts. Developing a new methodology for the detection of various DNA adducts is essential for medical diagnostics, and to this end, we demonstrate the applicability of on-chip capillary electrophoresis with an integrated electrochemical system for the separation and amperometric detection of various catechol estrogen-derived DNA adducts. A hybrid PDMS/glass microchip with in-channel amperometric detection interfaced with in situ palladium decoupler is utilized and presented. The influence of buffer additives along with the effect of the separation voltage on the resolving power of the microchip is discussed. Calibration plots were constructed in the range 0.4–10 μM with r ² ≥ 0.999, and detection limits in the attomole range are reported. These results suggest that on-chip analysis is applicable for analyzing various DNA adducts as potential biomarkers for future medical diagnostics.     

Chemiluminescence flow system for the determination of sulfite

A novel chemiluminescence(CL) flow system for sulfite is described based on electrostatically immobilized luminol on an anion exchange column. Sulfite is detected by the CL reaction with luminol bleeding from the column by hydrolysis. The calibration graph is linear in the range 3 × 10^–7 to 1 × 10^–5 mol/L, and the detection limit is 1 × 10^–7 mol/L. Interfering metal ions co-existing in sample solutions could be effectively eliminated on-line by an upstream cation exchanger. A complete analysis could be performed in 1 min with a relative standard deviation of less than 5%. The system could be reused for over 50 h and has been applied successfully to the determination of sulfur dioxide in air. Received: 21 October 1997 / Revised: 23 February 1998 / Accepted: 26 February 1998     

Optical fiber sensor for berberine based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole

A new optical fiber sensor was prepared for the determination of berberine in aqueous solution using a micrometer-sized flow-cell and a bifurcated optical fiber. The sensing is based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole (PBBO) in the PVC membrane. This process is accompanied by non-fluorescent ground-state complex formation. With this sensor, berberine can be determined in sample solutions from 2.42 × 10^–5 mol L^–1 to 6.04 × 10^–7 mol L^–1. Satisfactory reproducibility, reversibility, and short response times of less than 1 min are realized. The sensor also shows good selectivity over some common pharmaceutical species and alkali and alkali-earth metal salts, and can be used for the direct assay of berberine in commercial tablets. The results are in correspondence with those obtained by the pharmacopoeia method. Received: 4 April 1997 / Revised: 8 August 1997 / Accepted: 12 August 1997     

Development of a new flow-through bulk optode for the determination of manganese(II)

A flow-through bulk optode based on the use of 1-(2-pyridylazo)-2-naphthol (PAN) immobilized in a plasticized poly(vinyl chloride) membrane entrapped in a cellulose support, in conjuntion with the flow injection analysis technique, is proposed for the determination of manganese(II). The calibration graph obtained at 570 nm was linear in the range 0.27–27.5 mg L^–1 (5 × 10^–6– 5 × 10^–4 M) Mn(II) with a detection limit of 0.18 mg L^–1. The coefficients of variation of the sensor response for 5.5 mg L^–1 of Mn(II) were ±0.22% for consecutive measurements (n = 10), ±0.48% between days (n = 5) and ±0.38% between different membranes (n = 6). The sensor was readily regenerated with the carrier acetic acid/acetate buffer of pH 4.5. The method was applied to the determination of manganese in steels, waters and lemon tree leaves. Received: 13 December 2000 / Revised: 25 January 2001 / Accepted: 26 January 2001     

Optical fiber sensor for berberine based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole

A new optical fiber sensor was prepared for the determination of berberine in aqueous solution using a micrometer-sized flow-cell and a bifurcated optical fiber. The sensing is based on fluorescence quenching of 2-(4-diphenylyl)-6-phenylbenzoxazole (PBBO) in the PVC membrane. This process is accompanied by non-fluorescent ground-state complex formation. With this sensor, berberine can be determined in sample solutions from 2.42 × 10^–5 mol L^–1 to 6.04 × 10^–7 mol L^–1. Satisfactory reproducibility, reversibility, and short response times of less than 1 min are realized. The sensor also shows good selectivity over some common pharmaceutical species and alkali and alkali-earth metal salts, and can be used for the direct assay of berberine in commercial tablets. The results are in correspondence with those obtained by the pharmacopoeia method. Received: 4 April 1997 / Revised: 8 August 1997 / Accepted: 12 August 1997     

Characterization of a capacitance-coupled contactless conductivity detection system with sidewall electrodes on a low-voltage-driven electrophoresis microchip

A new type of capacitance-coupled contactless conductivity detection (C⁴D) system with sidewall electrodes was proposed for integration on a silicon-on-isolator–poly(dimethylsiloxane) (SOI-PDMS) hybrid low-voltage-driven electrophoresis microchip. By a microelectromechanical system process, the sidewall electrodes were fabricated precisely at either side of the separation channel. The area of the capacitor electrodes was the maximum value to improve the detection sensitivity with an enhanced capacitance effect. According to the simulation results, the structural parameters of the sidewall electrodes were determined as 550-μm length, 15-μm width, 80-μm separation distance, and 1-μm isolator thickness. The integrated microdevice with the SOI-PDMS hybrid electrophoresis microchip was very compact and the size was only 15 cm × 15 cm × 10 cm (width × length × height), which permitted miniaturization and portability. The detector performance was evaluated by K⁺ testing. The detection limit of the conductivity detector was determined to be 10^-9 and 10^-6 M for K⁺ in the static and electric-driven modes, respectively. Finally, the C⁴D was applied to low-voltage-driven electrophoresis on a microchip to carry out real-time measurement of the separation of amino acids. The separations of 10^-4 M lysine and phenylalanine in the low-voltage-driven electrophoresis mode were performed with an electric field of 300 V/cm and were completed in less than 15 min with a resolution of 1.3. The separation efficiency was found to be 1.3 × 10³ and 2.8 × 10³ plates for lysine and phenylalanine, respectively, with a migration time reproducibility of 2.7 and 3.2%. The conductivity detection limit of amino acids achieved was 10^-6 M. The proposed method for the construction of a novel C⁴D integrated on an SOI-PDMS hybrid low-voltage-driven electrophoresis microchip showed the most extensive integration and miniaturization of a microdevice, which is a further crucial step toward the realization of the “lab-on-a-chip” concept.     

Study on the Catalytic Determination of Vanadium (V) Using the Rhodamine 6G-Periodate Redox Reaction and its Analytical Application

 A fluorescence quenching method for the determination of vanadium (V) based on the vanadium- catalyzed oxidation of rhodamine 6G (R6G) with periodate in the presence of ethylenediaminetetraacetic acid disodium salt (EDTA) in sulfuric acid medium is described. The fluorescence was measured with excitation and emission wavelengths of 525 and 555 nm, respectively. The calibration graph for vanadium (V) had linear ranges of 3.0 × 10⁻⁹–1.5 × 10⁻⁸ mol/l and 1.5 × 10⁻⁸–4.0 × 10⁻⁸ mol/l, respectively. The detection limit was 1.7 × 10⁻⁹ mol/l. The proposed method was successfully applied to the determination of vanadium (V) in river water, rain water and cast iron samples. Received June 29, 2001 Revision October 9, 2001     

HPLC-MS/MS identification of tryptophan-derived tetrahydro-β-carboline derivatives in food

Based on electrospray ionization – tandem mass spectrometry coupled to liquid chromatography (HPLC-ESI-MS/MS) a method for separation and selective detection of 1,2,3,4-tetrahydro-β-carboline derivatives (THC) was developed. Retro-Diels Alder (RDA) fragmentation of the tetrahydropyrido moiety resulted in the characteristic neutral loss of 73 amu for tryptophan-derived THC-3-carboxylates. Accordingly, Pictet-Spengler condensation products of tryptamin exhibited product ions formed by loss of 29 amu. However, THC-1-carboxylates as obtained by reaction of tryptamin with α-oxo acids also yielded product ions [M+H-73]⁺, apparently originating from the combination of RDA-cleavage plus subsequent decarboxylation. As result, one had to consider the possibility of false-positive identification of THC-3-carboxylates in presence of isomeric THC-1-carboxylates. In order to overcome these analytical pitfalls, the unequivocal identification of trace amounts of THC-3-carboxylates by HPLC-MS/MS required the chromatographic separation of isomeric THC prior to selected reaction monitoring (SRM). Utilizing SRM, limits of detection for various THC were established in the 10 ng mL^–1 range. Subsequent analysis of food samples like seasoning sauce and yeast extract by HPLC-ESI-MS/MS revealed the presence of tryptamin-derived 1,2,3,4-tetrahydro-β-carboline-1-carboxylic acid, 1-methyl-tetrahydro-β-carboline-1-carboxylic acid, 1-carboxyethyl-tetrahydro-β-carboline and 1-carboxyethyl-tetrahydro-β-carboline-1-carboxylic acid beside established THC-3-carboxylates and -1,3-dicarboxylates. Received: 31 July 1997 / Revised: 23 October 1997 / Accepted: 30 October 1997     

An amperometric biosensor using toluidine blue as an electron transfer mediator intercalated in α-zirconium phosphate-modified horseradish peroxidase immobilization matrix

A novel H₂O₂ biosensor was constructed employing α-zirconium phosphate as a new support substrate to hold an electron shuttle toluidine blue between a glassy carbon electrode and horseradish peroxidase. Toluidine blue was intercalated into α-zirconium phosphate-modified horseradish peroxidase immobilization matrix cross-linked on a glassy carbon electrode surface via bovine serum albumin-glutaraldehyde. This co-immobilization matrix of the mediator and the enzyme was formed from the α-zirconium phosphate (α-ZrP)-toluidine blue (TB) inclusion colloid in which horseradish peroxidase (HRP) was dissolved. Intercalation of TB in layered α-ZrP was investigated by scanning electron microscopy (SEM), X-ray powder diffraction (XRD) and electrochemical measurements. TB immobilized in this way underwent a quasi-reversible electrochemical redox reaction at the electrode. Cyclic voltammetry and amperometric measurements demonstrated good stability and efficiently-shuttled electrons between HRP and the electrode. The sensor responded rapidly to H₂O₂ with a detection limit of 3.0 × 10^–7 mol/L. Received: 1 July 1997 / Revised: 13 October 1997 / Accepted: 21 October 1997     

Determination of titanium and zirconium wear debris in blood serum by means of HNO3/HF pressurized digestion using ICP – optical emission spectrometry

A ‘one bottle’ method to determine particulate debris of titanium and zirconium in blood serum was developed. Inductively coupled plasma – optical emission spectrometry (ICP-OES) was used to simultaneously detect both elements at concentrations above 50 ng/mL. Pressurized digestion by means of nitric and hydrofluoric acid in PTFE^TM-containers in a specific time-heat-pressure protocol apparatus was applied to assure complete solvation of particles including oxides. Total decomposition of the matrix was achieved and reasonable detection limits were accomplished. The amount of remaining carbon did not cause any matrix problems during measurement. Received: 10 October 1997 / Revised: 5 December 1997 / Accepted: 9 December 1997     

A microchip sensor for calcium determination

A newly designed glass-PDMS microchip-based sensor for use in the determination of Ca²⁺ ions has been developed, utilizing reflectance measurements from arsenazo III (1,8-dihydroxynaphthalene-3,6-disulfonic acid-2,7-bis[(azo-2)-phenyl arsenic acid]) immobilized on the surface of polymer beads. The beads, produced from cross-linked poly(p-chloromethylstyrene) (PCMS), were covalently modified with polyethylenimine (PEI) to which the Arsenazo III could be adsorbed. The maximum amount of Arsenazo III which could be immobilized onto the PEI-attached PCMS beads was found to be 373.71 mg g⁻¹ polymer at pH 1. Once fabricated, the beads were utilized at the detection point of the microfluidic sensor device with a fiber optic assembly for reflectance measurements. Samples were mobilized past the detection point in the sensor where they interact with the immobilized dye. The sensor could be regenerated and re-used by rinsing with HCl solution. The pH, voltage, linear range, and the effect of interfering ions were evaluated for Ca²⁺ determination using this microchip sensor. At the optimum potential, 0.8 kV, and pH 9.0, the linear range of the microchip sensor was 3.57 × 10⁻⁵ – 5.71 × 10⁻⁴ M Ca²⁺, with a limit of detection (LOD) of 2.68 × 10⁻⁵ M. The microchip biosensor was then applied for clinical analysis of calcium ions in serum with good results. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

The europium/samarium-2-benzoyl-indane-1,3-dione-cetyltrimethylammonium bromide fluorescence system and its analytical application

The fluorescence system of the Eu³⁺ (or/and Sm³⁺)-2-benzoyl-indane-1,3-dione(BID)-cetyltrimethylammonium bromide (CTMAB) was investigated at excitation wavelengths of 350 nm, and emission wavelengths at 612 nm for europium and 565, 606 and 650 nm for samarium, respectively. The system was used for the determination of Eu and Sm in rare earth oxides and of BID in water. Europium or/and samarium could be determined in the range of 1.0 × 10^–9–1.0 × 10^–5 mol/L and 2.0 × 10^–8–5.0 × 10^–5 mol/L, respectively; 1.0 × 10^–6–2.0 × 10^–5 mol/L of BID could also be determined. Received: 5 March 1997 / Revised: 6 August 1997 / Accepted: 20 September 1997     

The europium/samarium-2-benzoyl-indane-1,3-dione-cetyltrimethylammonium bromide fluorescence system and its analytical application

The fluorescence system of the Eu³⁺ (or/and Sm³⁺)-2-benzoyl-indane-1,3-dione(BID)-cetyltrimethylammonium bromide (CTMAB) was investigated at excitation wavelengths of 350 nm, and emission wavelengths at 612 nm for europium and 565, 606 and 650 nm for samarium, respectively. The system was used for the determination of Eu and Sm in rare earth oxides and of BID in water. Europium or/and samarium could be determined in the range of 1.0 × 10^–9–1.0 × 10^–5 mol/L and 2.0 × 10^–8–5.0 × 10^–5 mol/L, respectively; 1.0 × 10^–6–2.0 × 10^–5 mol/L of BID could also be determined. Received: 5 March 1997 / Revised: 6 August 1997 / Accepted: 20 September 1997     

Determination of anionic trace impurities in acetic acid by two-dimensional capillary isotachophoresis

Potential impurities such as nitrate, sulfate, nitrite, fluoride, formate, phosphate and oxalate were detected up to an analyte-to-excess ratio (ATER) of 1:3 · 10⁵ using an online two-dimensional isotachophoretic system. With the developed electrolyte system, consisting of two different leading electrolytes, limits of detection (LOD) in the nmol/L range were realised by conductivity detection. These optimized conditions were applied to the determination of these anionic impurities in different types of acetic acid and acetate salts in order to evaluate and to verify their quality. Without sample preparation and or preconcentration, we were able to determine the above mentioned analytes in the range of 0.00032–0.001% within 20 min. The results were compared with those obtained by classical methods. Received: 10 October 1997 / Revised: 9 December 1997 / Accepted: 10 December 1997