Extraordinary wavelength dependence of self-collimation effect in photonic crystal with low structural symmetry

We present the optical properties of a new type of photonic crystal (PC) named star-shaped PC (STAR-PC) with anomalous equi-frequency contours. Intentionally introducing low-symmetry in the primitive unit cell gives rise to progressively tilting flat contours, which are observed in the fifth band of the transverse magnetic mode. Due to the intrinsic dispersive feature of the proposed PCs, i.e. tilted self-collimation, the incident signal with different wavelengths can be successfully separated in a spatial domain without introducing any corrugations or complexities inside the structure. We show numerical investigations of wavelength selective characteristic of the proposed PC structure in both time and frequency domains. The STAR-PC approach can be considered a good candidate for the wavelength division applications in the design of compact photonic integrated circuits. For the purpose of wavelength separation implementations, the proposed structure may operate within the wavelength interval of 1484.5–1621.5 nm with a broad bandwidth of 8.82%. The corresponding inter-channel crosstalk value is as low as ?19 dB and the calculated transmission efficiency is above 97%.     

Multichannel wavelength division multiplexing system based on silicon rods of periodic lattice constant of hetero photonic crystal units

Characteristics of two different multichannel wavelength division multiplexing (WDM) systems composed of two-dimensional (2D) hetero photonic crystals (HPCs) are introduced. One utilizes five photonic crystal (PC) units, each fabricated with triangular and rectangular lattice. The other consists of five PC units in rectangular lattice. Both systems have a lattice constant difference of 4 nm between adjacent PC units, and both systems apply silicon rods with a radius of 120 nm. Finite-difference time-domain (FDTD) method and plan wave expansion (PWE) method reveal the ability of wavelength spacing ～8 nm with high quality factor (Q) in a system based on triangular and rectangular lattice; and ～8 nm with almost constant transmission efficiency based on rectangular lattice.     

Performance analysis of an eight channel demultiplexer using a 2D-photonic crystal quasi square ring resonator

Recent years, the design of photonic crystal (PC) based optical devices is receiving keen interest in research and scientific community. In this paper, two dimensional (2D) PC based eight channel demultiplexer is proposed and designed and the functional characteristics of demultiplexer namely resonant wavelength, transmission efficiency, quality factor, spectral width, channel spacing and crosstalk are investigated. The demultiplexer is designed to drop the wavelength centred at 1537.6 nm, 1538.5 nm, 1539.4 nm, 1540.4 nm, 1541.2 nm, 1541.9 nm, 1542.6 nm and 1543.1 nm. The proposed demultiplexer is primarily composed of bus waveguide, drop waveguide and quasi square ring resonator. The quasi square ring resonator and square ring micro cavity (inner rods) are playing a vital role for a desired channel selection. The operating range of the devices is identified through a photonic band gap (PBG) which is obtained using a plane wave expansion (PWE) method. The functional characteristics of the proposed demultiplexer are attained using a 2D finite difference time domain (FDTD) method. The proposed device offers low crosstalk and high transmission efficiency with ultra-compact size, hence, it is highly desirable for DWDM applications.     

Novel ultracompact wavelength division demultiplexer based on photonic band gap

We propose ultra-compact wavelength division demultiplexer based on photonic band gap in two dimensional photonic crystals. The structure consists of two different types of lattice, which can separate two communication wavelengths, 1310 and 1490 nm. In addition, it also can be used to separate the wavelengths of 1310 and 1550 nm if we change the structural parameters. The total size of the present structure is only 12.5 μm × 12.5 μm. The transmission efficiency is above 97%, and the good performance is verified with plane wave expansion and finite-difference time-domain simulation.     

Design,optimization and fabrication of 2D photonic crystals for solar cells

This paper presents the optimization of 2D photonic crystals (PCs) onto Si wafers to improve the performance of c-Si PV cells. The objective is to find a structure capable of minimizing the reflectance of the Si wafer in the spectral range between 400 nm and 1000 nm. The study has been limited to PCs that can be fabricated and characterized with the tools and technology available and to dimensions in the same order as the visible light wavelength. PCs with different shapes and dimensions have been simulated and finally the optimum structure has been fabricated by a process based on laser interference lithography (LIL) and reactive ion etching (RIE). This optimized PC presents an average reflectance of 3.6% in the selected wavelength range, without any other material used as antireflective coating. This result means a drastic reduction in comparison with reflectance obtained out of the standard wet etch texturization used in current solar cell manufacturing lines.     

Spontaneous emission in micro- and nano-structures

Spontaneous emission of emitters governing the performance of optoelectronic devices is a fundamental phenomenon, and it has strong environment-dependent characteristics. In this article, we mainly review the experimental and theoretical progresses in the control of spontaneous emission by manipulating optical modes with photonic crystals, optical microcavities and metallic nanostructures. The spontaneous emission from emitters in photonic crystals can be modified by the local density of states, and by employing photonic crystals, the devices’ efficiency is enhanced, the angular radiation pattern can be engineered, and highly efficient optoelectronic devices are achieved through decreasing the radiative lifetime. In quantum optical devices, microcavities would alter the lifetime of an excited state through tuning the resonance in the frequency and positioning between the emitters and cavity field, and inducing the emitters to emit spontaneous photons in a desired direction. The emerging enhanced electromagnetic field near metallic nanostructures can help to control and manipulate the spontaneous emission of an emitter. The use of micro- and nano-structures to manipulate spontaneous emission will open unprecedented opportunities for realizing functional photonic devices.     

Spontaneous emission in micro- and nano-structures

Spontaneous emission of emitters governing the performance of optoelectronic devices is a fundamental phenomenon, and it has strong environment-dependent characteristics. In this article, we mainly review the experimental and theoretical progresses in the control of spontaneous emission by manipulating optical modes with photonic crystals, optical microcavities and metallic nanostructures. The spontaneous emission from emitters in photonic crystals can be modified by the local density of states, and by employing photonic crystals, the devices’ efficiency is enhanced, the angular radiation pattern can be engineered, and highly efficient optoelectronic devices are achieved through decreasing the radiative lifetime. In quantum optical devices, microcavities would alter the lifetime of an excited state through tuning the resonance in the frequency and positioning between the emitters and cavity field, and inducing the emitters to emit spontaneous photons in a desired direction. The emerging enhanced electromagnetic field near metallic nanostructures can help to control and manipulate the spontaneous emission of an emitter. The use of micro- and nano-structures to manipulate spontaneous emission will open unprecedented opportunities for realizing functional photonic devices.     

Optimization of 1D photonic crystals to minimize the reflectance of silicon solar cells

This paper presents a process to easily fabricate photonic crystals (PCs) on silicon to increase the efficiency of solar cells by reducing the sunlight reflection in the front surface of the cell. The process, based on laser interference lithography (LIL) and reactive ion etching (RIE), allows creating nanostructures over large areas with different shapes and dimensions. The reflectance of the resulting surface depends on the height, pitch, width and shape of the created PC. In this work, these parameters have been optimized by computer simulation and the best PC so far found has been fabricated on silicon. We obtain a normal reflectance under 10% in the spectral region between 500 and 900 nm without any other material employed as antireflecting coating.     

Application of self-collimated beams to realization of all optical photonic crystal encoder

In this paper a 4×2 optical encoder is proposed by employing the self-collimation effect in 2D photonic crystals. The total structure of the proposed device is a combination of so called “beam splitters” and “mirrors”. The simulation result indicates that, this design can operate as 4×2 optical encoder, the footprint of structure is about 69 µm×55 µm and response time is about 1.4 ps.     

Reflection chromaticity of cholesteric liquid crystals with sandwiched periodical isotropic defect layers

We study one-dimensional photonic crystals made of cholesteric liquid crystals with sandwiched isotropic defect layers. Based on the Berreman Fast 4 × 4 matrix method, the dispersion relation of one-dimensional photonic crystals is calculated and the corresponding reflection chromaticity is obtained. It is found that the color shift could be controlled by adjusting the thickness and refractive index of the isotropic defect layers. Compared with conventional structures, the reflection chromaticity of this structure is insensitive to the incident angle, if the thickness ratio of the cholesteric liquid crystals to that of the isotropic defect layers and the refractive index of periodical isotropic defect layers are properly set. Furthermore, the common forbidden bands for both left and right circular polarizations can be obtained, and we also take the wavelength-dependent refractive indices into consideration and obtain the reflected light chromaticity with the incident angle increasing. The proposed device can be used as a reflective color filter in the display industry.     

Thermo-optical sensitivity analysis in photonic crystal circuits based on semiconducting or metallic metamaterial constituents

We introduce a novel analysis technique for predicting thermo-optical sensitivities in photonic crystal (PC) circuits composed of either dielectric-semiconducting or metallic constituents. The proposed numerical analysis is based on a hybrid formalism of the scattering matrix technique combined with the adjoint network method. The proposed computational scheme can, with modest computational resources, predict with high accuracy, the effect of the temperature fluctuations to the light-wave propagation in PCs. Numerical simulations show that PC circuits based on metallic metamaterial platforms are significantly less sensitive to temperature variations than the usual dielectricor semiconducting PCs.     

Experimental verification of enhanced electromagnetic field intensities at the photonic stop band edge of 3D polystyrene photonic crystals using Z-Scan technique

Enhancement of nonlinear absorption of polystyrene (PS) was investigated using 3D PS photonic crystals (PCs) with Z-scan technique. The Z-scan experiment was carried out at 532 nm in the picosecond (ps) regime. The transmittance of the PC was found to get modified because of the nonlinear absorption of PS particularly when 532 nm is near the photonic stop band (PSB) edge of PC. Calculations show that the field gets enhanced by 1.4 times the input field intensity within the crystal when the 532 nm wavelength falls at the PSB edge while keeping the crystal at an angle of 35°.     

High spatial resolution imaging in a clipping Kagomé lattice photonic crystal

In this paper, a two-dimensional Kagomé lattice photonic crystal (PC) made of GaAs (ɛ = 12.96) dielectric rods in air is considered. This Kagomé lattice PC has an effective refractive index n_eff = −1 at a low normalized frequency ω = 0.187 × 2πc/a. Imaging quality and the capability of the super-resolution of two point sources are studied for a superlens made of such PC structure. In order to achieve a high quality image and to improve the spatial super-resolution of two sources, a clipping Kagomé lattice PC is designed. Results simulated by finite-difference time-domain method show that imaging quality and super-resolution of two sources can be enhanced greatly as the perfect Kagomé lattice structure are superseded by the clipping Kagomé lattice structure. Coupled-mode theory analysis gives an explanation why the clipping structure is superior to the perfect one for both the imaging quality and the capability of the super-resolution of two sources. This clipping Kagomé lattice PC structure would be widely used in optical devices and integrated circuit.     

Single transverse mode control of VCSEL by photonic crystal and trench patterning

Single transverse mode control is achieved for multimode GaAs-based VCSEL by utilizing photonic crystal design and etched trench structure. Theoretical analysis is initially performed for photonic crystal design with various lattice constants and air holes diameter. The fabricated photonic crystal VCSEL with etched trench structure exhibits single mode output power of 0.7 mW, threshold current of 3.5 mA, slope efficiency of 0.10 W/A, and continuous single mode output spectrum throughout a wide operating current range. Comparison of typical oxide VCSEL, trench oxide VCSEL, and photonic crystal oxide VCSEL employing trench structure is presented. By combining photonic crystal and trench structure, single transverse mode operation of photonic crystal VCSEL can be much more strictly controlled.     

金属插层对C60/AlN一维光子晶体带隙的影响

利用传输矩阵方法,研究了金属Ag插层对C60/AlN一维光子晶体带隙宽度以及反射率的影响.结果表明：在C60与AlN之间插入Ag组成的［C60/Ag/AlN］n一维光子晶体,与未插入Ag层相比可使带隙增宽73.91%,最大反射率提高到91.01% .该结构可望用于制作紫外线波段的宽带反射镜.     

Submicron-scale spatial compression of light beam through two-stage photonic crystals spot-size converter

Photonic crystals spot-size converter that achieved the controlling of the spot-size through two-stage conversions was proposed. The pre-conversion depended on the efficient coupling between the high quality factor resonator and photonic crystal waveguide. Nearly unity transmission efficiency of the pre-conversion can be achieved through optimizing the radii of the rods located surrounding the resonator. Nanowire waveguide with width of 0.14 μm at a distance 1.05 μm from the resonator was introduced to realize the second stage conversion. Through two-stage conversions, the light beam width was converted to 0.16 μm. The transmission efficiency and conversion ratio reached to 94.6% and 14.875 respectively in theory.     

Design of tapering one-dimensional photonic crystal ultrahigh-Q microcavities

One-dimensional (1D) photonic crystal (PC) microcavities can be readily embedded into silicon-on-insulator waveguides for photonic integration. Such structures are investigated by 2D Finite-Difference Time-Domain method to identify designs with high transmission which is essential for device integration. On-resonance transmission is found to decrease with the increasing mirror pairs, however, the quality factor (Q) increases to a saturated value. The addition to the Bragg mirrors of tapered periods optimized to produce a cavity mode with a near Gaussian shaped envelope results in a major reduction in vertical loss. Saturated Q up to 2.4 × 10⁶ is feasible if the internal tapers are properly designed. The effect of increasing transmission is also demonstrated in a structure with the external tapers.     

Efficient tunable negative refraction photonic crystal achieved by an elliptic rod lattice with a nematic liquid crystal

Photonic crystals (PCs) have many potential applications because of their ability to control light-wave propagation. We have investigated the electromagnetic wave propagation inside an elliptic rod PC slab by means of finite-difference time-domain simulations. The band structure of the PC composed of elliptic rod in the square and triangular lattices is studied by solving Maxwell's equations using the plane wave expansion method. Numerical simulations show that the refractive angle can be tuned greatly by rotating the directors of elliptic rod in the PC slab. Furthermore, an optical switch based on elliptic rod PC structures with nematic liquid crystals was proposed. In the on/off switching system, the partial band gap can be controlled when the normalized operation frequency is 0.28. The modulation induced by liquid crystals created a sharp switching in the photonic devices. Such a mechanism of negative refraction PCs should open up a new application for designing components in photonic integrated circuits.     

Broadband super-collimation with low-symmetric photonic crystal

We investigate dispersive properties of two dimensional photonic crystal (PC) called star-shaped PC (STAR-PC) in order to succeed super-collimation over a broad bandwidth. Both time- and frequency-domain numerical methods are conducted. Due to introduced low-symmetry in the primitive cell, flat contours are observed at the fifth band for transverse magnetic mode. The proposed structure supports a super-collimation effect over a broad wavelength range between 1443 nm and 1701 nm with a bandwidth of Δω = 16.42%. The intrinsic characteristic of STAR-PC provides in-plane beam propagation with a limited diffraction length of 120a, where a is the lattice constant. By means of STAR-PC, one may realize super-collimation based single-mode optical devices with a low insertion loss, reduced dispersion and wide bandwidth.     

二维光子晶体提高C波段LED出光效率的研究

片上集成光源是未来光电子系统中光源发展的主要趋势,LED光源作为片上集成光源的主要缺点是其出光效率低,二维光子晶体是提高LED出光效率的有效手段。本工作设计了C波段LED的基本结构及参数,并采用时域有限差分法计算了不同阵列不同占空比的二维光子晶体能带结构,利用禁带理论选取提高C波段LED出光效率的最优二维光子晶体结构参数,结果表明三角排列空气孔二维光子晶体晶格常数a=500 nm且占空比R_p=0.44的光子晶体结构最优。