Selective extraction of iron(III) from aqueous nitrate solution in the presence of cobalt(II), copper(II) and nickel(II) ions using bis(delta2-2-imidazolinyl)-5,5'-dioxime.

The feasibility of using bis(delta2-2-imidazolinyl)-5,5'-dioxime (H2L) for the selective extraction of iron(III) from aqueous solutions was investigated by employing an solvent-extraction technique. The extraction of iron(III) from an aqueous nitrate solution in the presence of metal ions, such as cobalt(II), copper(II) and nickel(II), was carried out using H2L in binary and multicomponent mixtures. Iron(III) extraction has been studied as a function of the pH, equilibrium time and extractant concentration. From the extracted complex species in the organic phase, iron(III) was stripped with 2 M HNO3, and later determined using atomic-absorption spectrometry. The extraction was found to significantly depend on the aqueous solution pH. The extraction of iron(III) with H2L increases with the pH value, reaching a maximum in the zone of pH 2.0, remaining constant between 2 and 3.5 and subsequently decreasing. The quantitative extraction of iron(III) with 5 x 10(-30 M H2L in toluene is observed at pH 2.0. H2L was found to react with iron(III) to form ligand complex having a composition of 1:2 (Fe:H2L).     

Catalytic Oxidation of Iron(II) Aqua Complex by Oxygen in the Presence of Palladium(II) Tetraaqua Complex

The catalytic oxidation of iron(II) with oxygen occurs along with an autocatalytic reaction between palladium(II) tetraaqua complex and iron(II) aqua complex in an oxygen atmosphere. The reaction is catalyzed by a compound of palladium in an intermediate oxidation state, presumably by a small palladium cluster formed in the course of the reduction of palladium(II) tetraaqua complex with iron(II) aqua complex.     

Ion paired chromatography of iron (II,III), nickel (II) and copper (II) as their 4,7-Diphenyl-1,10-phenanthroline chelates

A reversed phase ion-paired chromatographic method that can be used to determine trace amounts of iron (II,III), nickel (II) and copper (II) was developed and applied to the determination of iron (II) and iron (III) levels in natural water. The separation of these metal ions as their 4,7-diphenyl-1,10-phenanthroline (bathophenanthroline) chelates on an Inertsil ODS column was investigated by using acetonitrile-water (80/20, v/v) containing 0.06 M perchloric acid as mobile phase and diode array spectrophotometric detection at 250-650 nm. Chromatographic parameters such as composition of mobile phase and concentration of perchloric acid in mobile phase were optimized. The calibration graphs of iron (II), nickel (II) and copper (II) ions were linear (r > 0.991) in the concentration range 0-0.5, 0-2.0 and 0-4.0 mug ml(-1), respectively. The detection limit of iron (II), nickel (II) and copper (II) were 2.67, 5.42 and 18.2 ng ml(-1) with relative standard deviation (n = 5) of 3.11, 5.81 and 7.16% at a concentration level of 10 ng ml(-1) for iron (II) and nickel (II) and 25 ng ml(-1) for copper (II), respectively. The proposed method was applied to the determination of iron(II) and iron(III) in tap water and sea water samples without any interference from other common metal ions.     

Rearrangement of the tris(2-pyridylthio)methanido ligand in an iron(II) complex containing an Fe-C bond

Iron(II) tris(2-pyridylthio)methanido (1) containing an Fe-C bond, obtained from the reaction of tris(2-pyridylthio)methane (HL(1)) and iron(II) triflate, reacts with protic acid to generate iron(II) bis(2-pyridylthio)carbene (1a). The carbene complex is converted to an iron(II) complex (2) of the 1-[bis(2-pyridylthio)methyl]pyridine-2-thione ligand (L(3)) upon treatment with a base. Complex 2 reversibly transforms to 1a in the presence of an acid. During the transformation of 1 to 2, a novel rearrangement of L(1) to L(3) takes place. The iron(II) complexes are reactive toward dioxygen to form the corresponding iron(III) complexes.     

Synthesis and characterization of iron(III), manganese(II), cobalt(II), nickel(II), copper(II) and zinc(II) complexes of salicylidene-N-anilinoacetohydrazone (H2L1) and 2-hydroxy-1-naphthylidene-N-anilinoacetohydrazone (H2L2)

Salicylidene-N-anilinoacetohydrazone (H(2)L(1)) and 2-hydroxy-1-naphthylidene-N-anilinoacetohydrazone (H(2)L(2)) and their iron(III), manganese(II), cobalt(II), nickel(II), copper(II) and zinc(II) complexes have been synthesized and characterized by IR, electronic spectra, molar conductivities, magnetic susceptibilities and ESR. Mononuclear complexes are formed with molar ratios of 1:1, 1:2 and 1:3 (M:L). The IR studies reveal various modes of chelation. The electronic absorption spectra and magnetic susceptibility measurements show that the iron(III), nickel(II) and cobalt(II) complexes of H(2)L(1) have octahedral geometry. While the cobalt(II) complexes of H(2)L(2) were separated as tetrahedral structure. The copper(II) complexes have square planar stereochemistry. The ESR parameters of the copper(II) complexes at room temperature were calculated. The g values for copper(II) complexes proved that the Cu-O and Cu-N bonds are of high covalency.     

Synthesis,Spectral and Structural Characterization of the First Bis-2-Pyridylethanol Complexes of Mn(II), Fe(II), Co(II), Ni(II), Cu(II) and Zn(II) Saccharinates: Crystal Structures of Diaquabis(2-Pyridylethanol)Iron(II) and Copper(II) Saccharinates

The first 2-pyridylethanol (pyet) complexes of manganese(II), iron(II), cobalt(II), nickel(II), copper(II) and zinc(II) saccharinates, were synthesized and characterized by elemental analyses, magnetic measurements, UV-Vis, and IR spectroscopic techniques. Crystal and molecular structures of the iron(II) and copper(II) complexes were determined by single crystal X-ray diffractometry. The experimental data showed that all the complexes are mononuclear with a general formula [M(H₂O)₂(pyet)₂](sac)₂, where sac is the saccharinate anion. All the metal ions are octahedrally coordinated by two aqua and two pyet ligands. The pyet ligand acts as a bidentate ligand through its amine nitrogen and hydroxyl oxygen atoms forming a six-membered chelate ring, while the sac ions remain outside the coordination sphere. All the complexes are isomorphous with a monoclinic space group P2₁/n and Z = 2.     

Extractive-spectrophotometric determination of trace iron(II) with di-2-pyridylmethanone 2-(5-nitro)pyridylhydrazone

The optimum conditions for the extractive-spectrophotometric determination of trace iron(II) with di-2-pyridylmethanone 2-(5-nitro)pyridylhydrazone have been established. Iron(II) reacts with this reagent at pH 2.0-7.5 to form an uncharged 1:2 (metal-to-ligand) complex, which can be extracted with toluene. Beer's law is obeyed over the range up to 0.84 mug/ml of iron(II) at 505 nm. The molar absorptivity of the extracted species is 5.83 x 10(4) 1.mole(-1).cm(-1). The proposed method is extremely sensitive and reproducible, and has been satisfactorily applied to the determination of total iron in freshwater samples by adding ascorbic acid to reduce iron(III).     

Theoretical and electrochemical studies on organometallic symmetrical schiff base complexes of Zn(II), Cu(II), Ni(II) and Co(II)

The electronic communication between two redox centres through a Schiff base complex has been investigated in a series of ethylenediimine-bis(1-ferrocenyl-1,3-butanedionate) complexes of Zn(II) 1, Cu(II) 2, Ni(II) 3 and Co(II) 4. Cyclic voltammetry experiments of 1 and 2 exhibit a unique two-electron reversible oxidation wave, whereas in the case of 3 and 4 two and three one-electron oxidation processes are, respectively, observed. These results suggest some electronic interaction between the iron atoms of the ferrocenyl groups. DFT calculations carried out on model complexes show that for all the studied compounds the removal of the first two electrons corresponds to the oxidation processes of the iron centres in the weakly coupled ferrocenyl termini. The electronic communication between the two iron centres increases on going from 1 to 4. Finally, a re-indexation of the bands observed in the UV-Visible spectra has been carried out using TDDFT calculations.     

Coordination Studies of Iron(II) Protoporphyrin IX and Iron(II) Hematoporphyrin IX with 4,4′-Dipyridyl and other Nitrogenous Bases

Abstract

The results of spectral studies of iron(II) protopor-phyrin IX and iron(II) hematoporphyrin IX with several substituted pyridines are reported. The existence in solution of an iron(II) porphyrin complex coordinated to a water molecule and to a substituted pyridine was shown by isolation of the complex from solution. The complex isolated was dimeric inono-4,4′-dipyridyl diaquo iron(II) hematoporphyrin. Addition of ethanol to the aqueous solvent inhibits coordination of iron(II) porphyrins with substituted pyridines. The protoporphyrin ring enhances coordination relative to the hematoporphyrin ring.     

Determination of iron(II) with chemically-modified carbon-paste electrodes

The utility of carbon-paste electrodes modified with 2,2'-bipyridyl and Nafion for the differential pulse voltammetric determination of iron(II) in aqueous medium is demonstrated. The method is based on formation of the 2,2'-bipyridyl complex of iron(II) and its accumulation by the Nafion. The differential pulse voltammetric response of the accumulated complex is used as the analytical signal. The response was evaluated with respect to carbon-paste composition, preconcentration time, pH, iron(II) concentration and other variables. A 3-min accumulation period permits measurement of iron(II) down to 10(-8)M, and a relative standard deviation of 3.8% for 2 x 10(-6)M iron(II). Rapid and convenient chemical renewal allows use of a single modified carbon-paste electrode in multiple analytical measurements over several days. The proposed procedure was applied to the determination of iron in certified standard reference materials and trace iron in natural waters.     

Kinetics and mechanism of oxidation of the chromium(III)-dl-valine complex/periodate reaction. Evidence for iron(II) catalysis

Oxidation of the chromium(III)-dl-valine complex [CrIII(L)2(H2O)2]+ by periodate has been investigated in aqueous medium. The kinetics of the reaction in aqueous medium in the presence of iron(II) as catalyst obeyed the rate law:Catalysis by iron(II) is believed to be due to the oxidation of iron(II) to iron(III), which acts as the oxidizing agent. The thermodynamic activation parameters were calculated and we propose that electron transfer proceeds through an inner-sphere mechanism via coordination of IO4– to chromium(III).     

Iron(II)-chloramine-T reaction

When a large excess of the oxidant is used in the iron(II)-chloramine-T reaction at pH 2.56-5.6 the amount of oxidant consumed is well above the stoichiometric amount required to oxidize iron(II) to iron(III). This has been attributed to the formation and subsequent behaviour of free radicals during the reaction. The formation of free radicals has been experimentally demonstrated. They apparently dimerize to give products of the type R-NCl-NCl-R (R = CH(3)C(6)H(4)SO(2)), which are further oxidized by chloramine-T. The dimerized species liberate iodine very slowly from acidified potassium iodide. This explanation satisfactorily accounts for the observed extent and rate of destruction of excess of chloramine-T in presence of small amounts of Fe(II) or bromide at pH 2.65-4.70. The storage of chloramine-T in metal containers might cause extensive destruction of the oxidant by a similar free radical mechanism and should be avoided.     

Synthesis and characterization of homo- and heterodinuclear M(II)-M'(III) (M(II) = Mn or Fe, M'(III) = Fe or Co) mixed-valence supramolecular pseudo-dimers. The effect of hydrogen bonding on spin state selection of M(II)

Reaction of H(3)L(1), the Schiff base condensate of tris(2-aminoethyl)amine with three equivalents of 5-methyl-1H-pyrazole-3-carboxaldehyde, with manganese(II)perchlorate or iron(II)tetrafluoroborate results in the isolation of [MH(3)L(1)]X(2) (M = Mn and X = ClO(4) and M = Fe and X = BF(4)). These complexes are high spin d(5) and d(6), respectively, as inferred from the long M-N bond distances obtained by single crystal X-ray diffraction for both and variable temperature magnetic susceptibility and M?ssbauer spectroscopy for the iron complex. Aerobic treatment of a solution of [CoH(3)L(1)](2+) with three equivalents of potassium hydroxide produced [CoL(1)]. Homonuclear pseudo-dimers were prepared by the aerobic reaction of [FeH(3)L(1)](BF(4))(2) with 1.5 equivalents of potassium hydroxide to give {[FeH(1.5)L(1)](BF(4))}(2) or by the metathesis reaction of [FeH(2)L(1)][FeHL(1)](ClO(4))(2) with sodium hexafluorophosphate to give [FeH(3)L(1)][FeL(1)](PF(6))(2). The complexes were characterized by EA, IR, ESI-MS, variable temperature single crystal x-ray diffraction and M?ssbauer spectroscopy. The iron(III) atom is low spin while the iron(II) atom is spin crossover. Heteronuclear pseudo-dimers were prepared by the 1:1 reaction of [FeH(3)L(1)](BF(4))(2) or [MnH(3)L(1)](ClO(4))(2) with [CoL(1)]. [MH(3)L(1)][CoL(1)](X)(2) (M = Fe and X = BF(4) or M = Mn and X = ClO(4)), were characterized by IR, EA, variable temperature single crystal X-ray diffraction and M?ssbauer spectroscopy in the iron case. The data support a spin crossover and high spin assignment for the iron(II) and manganese(II), respectively. DFT calculations demonstrate that the spin state of the iron(II) atom in {[FeH(3)L(1)][FeL(1)]}(2+) changes from high spin to low spin as the iron(II)-iron(III) distance decreases. This is supported by experimental results and is a result of hydrogen bonding interactions which cause a significant compression of the M(II)-N(pyrazole) bond distances.     

Structural and magnetic investigations of the mixed-valence Fe(II,III) two-dimensional layer complex, [Fe2(II) Fe2(III)(HCOO)10(C6H7N)6]n.

The structure of the complex, [Fe2(II)Fe2(III)(HCOO)10(C6H7N6)n, (1) exhibits a neutral two-dimensional layer network of alternating iron(II) and iron(III) ions, bridged equatorially by formate groups. All iron atoms are octahedrally coordinated, with iron(III) coordinating axially to one gamma-picoline and one formate group, while the iron(II) centers interact axially with two gamma-picoline groups, above and below the layer plane. The complex crystallizes in the triclinic space group P1 at all studied temperatures [at 120 K, the cell dimensions are: a = 10.228(1), b = 12.071(1), c = 12.072(1) A, alpha = 89.801(2), beta = 71.149(2), gamma = 73.371(2) degrees]. An intralayer antiferromagnetic exchange interaction of J = -2.8 cm(-1) between iron(II) and iron(III) was observed in the magnetic studies. Decreasing the temperature to close to 20 K causes a magnetic-ordering phenomenon to occur and a low-temperature phase with a long-range antiferromagnetic spin orientation appears. The magnetic phase transition was confirmed by M?ssbauer spectroscopic studies at temperatures above and below the critical temperature. Structural information of 1 from synchrotron X-ray diffraction data collected at room temperature and 16 K suggests that the antiferromagnetic ordering is caused by an enhanced pi-pi interaction between chi-picoline groups from adjacent layers.     

Structural elucidation of manganese(II), iron(III), cobalt(II), nickel(II), copper(II) and zinc(II) complexes of a new multidentate dihydrazino quinoxaline derivative

Summary Manganese(II), iron(III), cobalt(II), nickel(II), copper(II) and zinc(II) complexes of a new multidentate oxygen-nitrogen donor, bis(N-salicylidene)-2,3-dihydrazino-1,4-quinoxaline (H₂BSDHQ) were prepared and characterised by elemental analysis, conductance, thermal, spectral and magnetic data. H₂BSDHQ deprotonates to give a dibasic ONNO donor set in a trivalent iron(III) complex, which binds to the divalent metal ions in a bis-tridentate fashion, using two monobasic ONN donor sets, and resulting in polymeric complexes. Octahedral geometries are proposed for all these complexes, and preliminary studies show that they possess potential antimicrobial activity.     

NO* release from MbFe(II)NO and HbFe(II)NO after oxidation by peroxynitrite

In this work, we showed that the reaction of peroxynitrite with MbFe(II)NO, in analogy to the corresponding reaction with HbFe(II)NO (Herold, S. Inorg. Chem. 2004, 43, 3783-3785), proceeds in two steps via the formation of MbFe(III)NO, from which NO* dissociates to produce iron(III)myoglobin (Mb = myoglobin; Hb = hemoglobin). The second-order rate constants for the first steps are on the order of 10(4) and 10(3) M(-1) s(-1), for the reaction of peroxynitrite with MbFe(II)NO and HbFe(II)NO, respectively. For both proteins, we found that the values of the second-order rate constants increase with decreasing pH, an observation that suggests that HOONO is the species responsible for oxidation of the iron center. Nevertheless, it cannot be excluded that the pH-dependence arises from different conformations taken up by the proteins at different pH values. In the presence of 1.2 mM CO2, the values of the second-order rate constants are larger, on the order of 10(5) and 10(4) M(-1) s(-1), for the reaction of peroxynitrite with MbFe(II)NO and HbFe(II)NO, respectively. The pH-dependence of the values for the reaction with MbFe(II)NO suggests that ONOOCO2- or the radicals produced from its decay (CO3*-/NO2*) are responsible for the oxidation of MbFe(II)NO to MbFe(III)NO. In the presence of large amounts of nitrite (in the tens and hundreds of millimoles range), we observed a slight acceleration of the rate of oxidation of HbFe(II)NO by peroxynitrite. A catalytic rate constant of 40 +/- 2 M(-1) s(-1) was determined at pH 7.0. Preliminary studies of the reaction between nitrite and HbFe(II)NO showed that this compound also can oxidize the iron center, albeit at a significantly slower rate. At pH 7.0, we obtained an approximate second-order rate constant of 3 x 10(-3) M(-1) s(-1).     

Strukturanalyse und Darstellung einer neuen Gruppe von Fe(II)-, Co(II)- und Ni(II)-Komplexen nach synergistischer Extraktion

Zusammenfassung Zur synergistischen Extraktion von Eisen(II)-, Cobalt(II)- und Nickel(II)-Komplexen werden fluorierte Diketone(A) (Derivate des Thenoyltrifluoracetons) und eine neue Gruppe Schiffscher Basen verwendet. Aus den Extraktionskurven nach der Job- und der Molar-Ratio-Methode, der Elementaranalyse und aus Molmassenbestimmungen werden Komplexverbindungen der Zusammensetzung [MA₂B] nachgewiesen. Aus den Elektronen- und IR-Spektren und aus magnetischen Messungen wird für die Ni(II)-Komplexe eine octaedrische Struktur vorgeschlagen.

---

Structure analysis and preparation of a new group of iron(II), cobalt(II) and nickel(II) complexes after synergistic extraction

Summary For the synergistic extraction of iron(II), cobalt(II) and nickel(II) complexes fluorinated diketones(A) (derivates of thenoyltrifluoroacetones) and a new group of Schiff bases were used. Complex compounds of the composition [MA₂B] could be proved by Job- and molar-ratio method investigation of the extraction curves, by elementary analysis and by molar mass detection. Electron and infrared spectra and magnetical measurements led to an octahedral structure proposal for the Ni(II) complexes.

---

---

Mein Dank gilt besonders Herrn Professor Dr. D. E. W. Trincker, Direktor des Instituts für Physiologie II der RUB, für die Bereitstellung der Geräte und Chemikalien.     

Liquid chromatographic determination of cobalt(II), copper(II) and iron(II) using 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone as derivatizing reagent

The complexing reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) was examined for high performance liquid chromatographic (HPLC) separations of cobalt(II), copper(II) and iron(II) or cobalt(II), nickel(II), iron(II), copper(II) and mercury(II) as metal chelates on a Microsorb C-18, 5-mum column (150x4.6 mm i.d.) (Rainin Instruments Woburn, MA, USA). The complexes were eluted isocratically with methanol:acetonitrile:water containing sodium acetate and tetrabutyl ammonium bromide (TBA). UV detection was at 254 nm. The solvent extraction procedure was developed for simultaneous determination of the metals, with detection limits within 0.5-2.5 mug ml(-1) in the final solution. The method was applied for the determination of copper, cobalt and iron in pharmaceutical preparation.     

O2 activation by bis(imino)pyridine iron(II)-thiolate complexes

The new iron(II)-thiolate complexes [((iPr)BIP)Fe(II)(SPh)(Cl)] (1) and [((iPr)BIP)Fe(II)(SPh)(OTf)] (2) [BIP = bis(imino)pyridine] were prepared as models for cysteine dioxygenase (CDO), which converts Cys to Cys-SO(2)H at a (His)(3)Fe(II) center. Reaction of 1 and 2 with O(2) leads to Fe-oxygenation and S-oxygenation, respectively. For 1 + O(2), the spectroscopic and reactivity data, including (18)O isotope studies, are consistent with an assignment of an iron(IV)-oxo complex, [((iPr)BIP)Fe(IV)(O)(Cl)](+) (3), as the product of oxygenation. In contrast, 2 + O(2) results in direct S-oxygenation to give a sulfonato product, PhSO(3)(-). The positioning of the thiolate ligand in 1 versus 2 appears to play a critical role in determining the outcome of O(2) activation. The thiolate ligands in 1 and 2 are essential for O(2) reactivity and exhibit an important influence over the Fe(III)/Fe(II) redox potential.     

Liquid chromatographic determination of chelates of cobalt (II), copper (II) and iron (II) with 2-thiophonaldehyde-4-phenyl-3-thiosemicarbazone

Summary A new chelating reagent 2-thiophenaldehyde-4-phenyl-3-thiosemicarbazone (TAPT) has been examined for high performance liquid chromatographic (HPLC) separations of cobalt (II), copper(II) and iron (II) or cobalt (II), nickel (II), iron (II), copper (II) and mercury (II) as metal chelates on a C₁₈, 5μm column (250×4 mm i.d.) The chelates were eluted isocratically with methanol: acetonitrile: water containing sodium acetate and tetrabutylammonium bromide (TBA), and detected at 254 nm. A solvent extraction procedure was developed for simultaneous determination of the metals with detection limits within 0.02–2.5 μ g.mL⁻¹. The method was applied to the determination of copper, cobalt and iron in natural waters.