Determination of chromatographic dissociation constants of some carbapenem group antibiotics and quantification of these compounds in human urine

The dissociation constant values (_s^spK_a) of some carbapenem group drugs (ertapenem, meropenem, doripenem) in different percentages of methanol–water binary mixtures (18, 20 and 22%, v/v) were determined from the mobile phase pH dependence of their retention factor. Evaluation of these data was performed using the NLREG program. From calculated pK_a values, the aqueous pK_a values of these subtances were calculated by different approaches. Moreover, the correlation established between retention factor and the pH of the water–methanol mobile phase was used to determine the optimum separation conditions. In order to validate the optimized conditions, these drugs were studied in human urine. The chromatographic separation was realized using a Gemini NX C₁₈ column (250 × 4.6 mm i.d., 5 µm particles) and UV detector set at 220 and 295 nm. Copyright © 2013 John Wiley & Sons, Ltd.     

UPLC-ESI-MS-MS Determination of Three β2-Agonists in Pork

The chromatographic behaviour of bupropion hydrochloride, a basic drug of pK _a 7.9, has been investigated under reversed-phase ion-pairing conditions and the results were used to develop a method for analysis of bupropion hydrochloride in pharmaceuticals. Chromatographic separation of bupropion hydrochloride and carbamazepine (used as internal standard) was performed on a C₈ column (150 mm × 4.6 mm i.d., 3.5-μm particle), with 40:10:50 (v/v) methanol–acetonitrile–phosphate buffer (20 mm, pH 3.0), containing 10 mm 1-heptane sulfonic acid sodium salt (1-HSA), as optimum mobile phase at a flow rate of 1.0 mL min^?1. UV detection was at 254 nm. The fully validated method enables reproducible and selective analysis of bupropion hydrochloride in pharmaceuticals.     

A Novel RP-LC Method for Determination of pK a Values of Some Anticancer Agents and Their Assay

A simple, reliable, and rapid RP-LC method has been developed for the determination of some anticancer drugs (daunorubicin, doxorubicin and vincristine sulfate) in their dosage forms and human urine. These compounds are well separated on a C18 column using the mobile phase consisting of a mixture of acetonitrile (50:50; v/v) at a flow rate of 1.5 mL min^?1. The analyte peaks were detected at 235 nm for doxorubicin and daunorubicin, and 220 nm for vincristine. Linearity was obtained in different concentration ranges between 0.10 and 12 μg mL^?1 for all compounds. Good sensitivity for all analytes was observed with DAD detection. LOD and LOQ of the method were found satisfying. The proposed method has been extensively validated in accordance with ICH guidelines and obtained results proved that the proposed method was precise, accurate, selective, and sensitive for simultaneous analysis of studied compounds. All analytical procedures including sample preparation, flow rate, and run time were at low levels. Also, pK _a values were determined using the dependence of the retention factor on the pH of the mobile phase. The effect of the mobile phase composition on the ionization constant was studied by measuring the pK _a at different methanol–water mixtures, ranging between 45 and 60 % (v/v).     

A Novel RP-LC Method for Determination of pK a Values of Some Anticancer Agents and Their Assay

A simple, reliable, and rapid RP-LC method has been developed for the determination of some anticancer drugs (daunorubicin, doxorubicin and vincristine sulfate) in their dosage forms and human urine. These compounds are well separated on a C18 column using the mobile phase consisting of a mixture of acetonitrile (50:50; v/v) at a flow rate of 1.5 mL min⁻¹. The analyte peaks were detected at 235 nm for doxorubicin and daunorubicin, and 220 nm for vincristine. Linearity was obtained in different concentration ranges between 0.10 and 12 μg mL⁻¹ for all compounds. Good sensitivity for all analytes was observed with DAD detection. LOD and LOQ of the method were found satisfying. The proposed method has been extensively validated in accordance with ICH guidelines and obtained results proved that the proposed method was precise, accurate, selective, and sensitive for simultaneous analysis of studied compounds. All analytical procedures including sample preparation, flow rate, and run time were at low levels. Also, pK _a values were determined using the dependence of the retention factor on the pH of the mobile phase. The effect of the mobile phase composition on the ionization constant was studied by measuring the pK _a at different methanol–water mixtures, ranging between 45 and 60 % (v/v).

     

An Improved HPLC Method for Simultaneous Analysis of Losartan Potassium and Hydrochlorothiazide with the Aid of a Chemometric Protocol

An experimental design method was used for fast, simple, and accurate high-performance-pressure liquid chromatograpy (HPLC) determination of losartan and hydrochlorothiazide in combined dosage forms. This method avoids the disadvantages of the traditional analytical approach, which is time-consuming, involves a large number of runs, and does not allow the determination of multiple interacting parameters. On the basis of preliminary experiments, three independent variables (methanol content, pH value of the mobile phase, and flow rate) were selected as input, and as dependent variables, five responses (retention time of hydrochlorothiazide, retention time of losartan, asymmetry of hydrochlorothiazide peak, asymmetry of losartan peak, and resolution) were chosen. A full 2³ factorial design was used to determine which factors had an effect on the studied response. Afterwards, experimental design was used to optimize these influencing parameters in the previously selected experimental domain. After optimizing the experimental conditions, a separation was conducted on a Zorbax C₈ (150 mm × 4.6 mm, 5 μm particle size) column with a mobile phase consisting of methanol–acetonitrile–acetate buffer 45:20:35 v/v/v, pH 4.8 with flow rate of 0.82 mL min^?1 and column temperature of 25 °C. The developed method was successfully applied to simultaneous separation of these active drug compounds in their commercial pharmaceutical dosage forms.     

An LC Method for Quantification of 2,3-Dichlorobenzoyl Cyanide and Its Related Regio Isomers

A simple, sensitive and selective gradient reversed phase LC method has been developed for separation and determination of 2,3-dichlorobenzoyl cyanide and its regio isomers which is an intermediate of lamotrigine pure form. The separation was achieved on a reversed phase C-18 column using 0.01 M ammonium acetate buffer at pH 5.5 and methanol (50:50 v/v) mixture as solution A and methanol, water mixture (90:10 v/v) as solution B in a gradient elution at a flow rate of 1.5 mL min^?1 with UV detection at 215 nm. The method is found to be selective, precise, linear, accurate and also robust. It was not only used for quality assurance, but also monitoring the synthetic reactions involved in the process development of Lamotrigine. The LC method is found to be simple, rapid, specific and reliable for the determination of unreacted levels of raw materials and isomers in reaction mixtures and finished product Lamotrigine. The method was fully validated as per ICH guidelines and results from validation confirm that the method is highly suitable for its intended purpose.     

HPLC Separation of Nimesulide and Five Impurities using a Narrow-Bore Monolithic Column: Application to Photo-Degradation Studies

Nimesulide and its fine impurities were separated using the new narrow-bore FastGradient monolithic column (50 × 2.0 mm i.d.). The mobile phase was a mixture of NH₄H₂PO₄ (10 mmol L^?1, pH 7)/ACN (69:31 v/v) and UV detection was carried out at 230 nm. Depending on the flow rate of the mobile phase (0.5?C1.0 mL min^?1), efficient separation of the six compounds could be achieved within 5?C10 min. The developed HPLC method was validated in terms of linearity, limits of detection and quantitation, precision, selectivity, and accuracy. Application to the photo-stability of nimesulide revealed a ca. 50% degradation of the active pharmaceutical ingredient within 24 h. Impurity D was also identified at a maximum level of 0.46% (24 h).     

Simultaneous Determination of Tetrahydropalmatine, Magnolol, Emodin and Chrysophanol in Chinese Herbal Preparation by RP-HPLC-PDA

A reversed phase high performance liquid chromatography coupled with photo-diode array (RP-HPLC-PDA) detection method was proposed for simultaneous determination of tetrahydropalmatine, magnolol, emodin and chrysophanol in a Chinese herbal preparation (Dan’an mixture). The separation was performed on a Diamonsil? C₁₈ column (250 × 4.6 mm, 5 μm) with methanol and 0.1% phosphoric acid (88:12, v/v) as the mobile phase at the flow-rate of 0.8 mL min^?1. Two detection wavelengths were utilized for the quantitative analysis (209 nm for tetrahydropalmatine and magnolol, and 220 nm for emodin and chrysophanol, respectively). A good linear regression relationship (r ≥ 0.9996) between peak-areas and concentrations was obtained over the range of 0.25–50 μg mL^?1 for all the analytes. The spike recoveries, measured at three concentration levels, varied from 90.13 to 102.11%. The method was successfully applied to determine the contents of the four compounds in Dan’an mixture.     

Development of Validated Chromatographic Methods for the Simultaneous Determination of Metronidazole and Spiramycin in Tablets

Two chromatographic methods have been described for the simultaneous determination of metronidazole (MET) and spiramycin (SPY) in their mixtures. The first method was based on a high performance thin layer chromatographic (HPTLC) separation of the two drugs followed by densitometric measurements of their spots at 240 nm. The separation was carried out on Merck TLC aluminum sheets of silica gel 60 F₂₅₄ using methanol: chloroform (9:1, v/v) as a mobile phase. Analysis data was used for the linear regression line in the range of 1.0–2.0 and 0.8–2.0 μg band⁻¹ for MET and SPY, respectively. The second method was based on a reversed-phase liquid chromatographic separation of the cited drugs on a C-18 column (5 μm, 250 × 4.6 mm, i.d.). The mobile phase consisted of a mixture of phosphate buffer of pH 2.4 and acetonitrile (70:30, v/v). The separation was carried out at ambient temperature with a flow rate of 1.0 mL min⁻¹. Quantitation was achieved with UV detection at 232 nm based on peak area with linear calibration curves at concentration ranges 0.4–50.0 and 0.5–50.0 μg mL⁻¹ for MET and SPY, respectively. The proposed chromatographic methods were successfully applied to the determination of the investigated drugs in pharmaceutical preparations. Both methods were validated in compliance with ICH guidelines; in terms of linearity, accuracy, precision, robustness, limits of detection and quantitation and other aspects of analytical validation.

     

Novel Data on the Effect of Tetrahydrofuran as an Organic Co-Modifier in RP-HPLC

The aim of the study was to characterise the unique chromatographic properties of tetrahydrofuran (THF) based on hydrogen-bonding interactions with weakly acidic compounds (pK _a = 7.4–12.48) including steroids with phenolic hydroxyl groups, their substituted derivatives and heterocyclic amides having different polar functional groups (log P = 1.15–4.78). The results suggested that the organic modifier does not simply affect retention by changing the hydrophobicity of eluent, but rather specifically modifies the nature of the analyte–stationary phase interaction. In the water/isopropanol (IPA)/THF eluent mixture THF forms a hydrogen-bonded complex with the phenolic steroid compounds. The apparent formation of the THF–analyte complex depended on the proportion of components in the ternary mobile phase employed (from 70:30:0 to 70:0:30 v/v/v). The weakly acidic model compounds showed an increasing retention time with increasing THF concentration. This effect of THF was found to be a solvent-specific interaction, which was only observed in the presence of IPA. The systematic modification of the phase ratio of organic modifiers exerts a great influence on retention time and changes the separation processes over a wide range. In the case of other protic solvents (methanol, ethanol) we could not observe this selective chromatographic behaviour. From the point of view of chromatographic practice, the use of THF–IPA co-modifiers may increase the selectivity and provide excellent possibilities for separation of weakly acidic compounds including the large family of phenolic compounds.     

Application of Multicriteria Methodology in the Development of Improved RP-LC-DAD for Determination of Rizatriptan and Its Degradation Products

The aim of this study was to establish an improved isocratic RP-LC-DAD method for separation and determination of rizatriptan benzoate and its two degradation products, L-749.019 and L-783.540 in tablets. Since the chromatographic behavior of target substances can be influenced by various experimental parameters, the whole study was carried out by employing experimental design methodology. The investigation included the influence of mutual changes of the mobile phase composition (methanol amount in the range 3–7% and pH of the water phase from 5.0 to 6.0) and the temperature (from 20 to 30 °C). The response surface design by means of Box-Brehnken design was used to obtain a predictive model which describes the changes in the response within the experimental domain. Additionally, several different target responses were evaluated and Derringer’s desirability function was used for reaching a suitable compromise among the responses. This multi-criteria decision making approach is based on constructing a desirability function for each individual response and afterwards establishing the overall desirability function. Such methodology provided us with the best operating conditions, satisfactory resolutions between the analytes and the shortest possible total analysis time. The experiments were performed on C₁₈ XTerra (150 mm × 3.9 mm), 5 μm column with the mobile phase consisting of a mixture of methanol, TEA and 0.01 mol L^?1 KH₂PO₄ (6:9.4:84.6 v/v) pumped at a flow rate of 1.2 mL min^?1, pH of the water phase adjusted to 6 with 85% orthophosphoric acid, a column temperature of 20 °C and detection at 225 nm. Afterwards, the new method was validated and subsequently applied in analysis of commercially available rizatriptan tablets.     

RP-LC and HPTLC Methods for the Determination of Olmesartan Medoxomil and Hydrochlorothiazide in Combined Tablet Dosage Forms

Two new, rapid, precise, accurate and specific chromatographic methods were described for the simultaneous determination of olmesartan medoxomil and hydrochlorothiazide in combined tablet dosage forms. The first method was based on reversed phase liquid chromatography using an Eurosphere 100 RP C18 column (250 × 4.6 mm ID, 5 μm). The mobile phase was methanol–0.05% o-phosphoric acid (60:40 v/v) at a flow rate of 1.0 mL min^?1. Commercially available tablets and laboratory mixtures containing both drugs were assayed and detected using a UV detector at 270 nm. The second method involved silica gel 60 F₂₅₄ high performance thin layer chromatography and densitometric detection at 254 nm using acetonitrile–ethyl acetate–glacial acid (7:3:0.4 v/v/v) as the mobile phase. Calibration curves ranged between 200–600 and 125–375 ng spot^?1 for olmesartan and hydrochlorothiazide, respectively.     

Development and Validation of a Stability Indicating LC Method for the Determination of Faropenem in Pharmaceutical Formulations

A simple, selective and sensitive stability indicating LC method has been developed and validated for the determination of faropenem in bulk drug and pharmaceutical formulations in the presence of degradation products. The separation was achieved by using an isocratic mobile phase mixture of acetate buffer of pH 3.5 and methanol (65:35, v/v) and 250 mm × 4.6 mm I.D., 5 μm particle size SGE make Wakosil C-18 AR column at flow rate of 1.0 mL min^?1 with detection at 305 nm. The retention time of faropenem is 6.63 min and was linear in the range of 5–75 μg mL^?1 (r = 0.9999). The drug was subjected to stress conditions of hydrolysis, oxidation, photolysis and thermal degradation and was found to be unstable in all the stress conditions. The proposed method was successfully employed for quantification of faropenem in bulk drug and its pharmaceutical formulations.     

A Validated Stability-Indicating LC Method for Zonisamide

A simple, isocratic, rapid, and accurate reversed-phase high-performance liquid chromatographic method has been established for quantitative determination of zonisamide. The method is also applicable to determination of related substances in the bulk drug. Chromatographic separation was achieved on a 250 mm × 4.6 mm, 5-μm particle, C₁₈ column; the mobile phase was a 70:30 (v/v) mixture of 0.1% (v/v) aqueous triethylamine, adjusted to pH 2.5 with dilute orthophosphoric acid, and acetonitrile. Chromatographic resolution of zonisamide from its potential impurity, A, was found to be >2. The limits of detection and quantification of zonisamide and impurity A were 0.04 and 0.12 μg mL^?1, respectively, for 20 μL injection volume. Recovery of zonisamide ranged from 98.5 to 101.2% and recovery of impurity A from a sample of zonisamide ranged from 97.4 to 102.7%. The method was validated for linearity, accuracy, precision, and robustness.     

Crossed D-Optimal Experimental Design Methodology for the Chromatographic Separation of Antihypertensive Drugs

An efficient, isocratic, reversed-phase high performance liquid chromatography method was developed, optimized, and validated to separate nine antihypertensive drugs by experimental design methodology and the Crossed D-Optimal process. In order to find the most suitable separation conditions, twenty-three experiments were carried out, based on the simultaneous effects of three solvent (methanol, acetonitrile, and water) compositions in combination with different pH values of the mobile phase. The components were cross-combined with a pH factor (quadratic x quadratic process), whereas optimal adjusted models were used for the eight individually chosen responses. The optimal mobile phase consisted of methanol, acetonitrile, and 0.05 M aqueous ammonium acetate at pH 3.1 (18:26: 56 v/v/v, pH adjustment with formic acid). Analysis was carried out on a C₁₈ column (150 × 4.6 mm, 5 µm) at 40 °C using photodiode array detection at 242 nm. The system was found to produce sharp and well resolved peaks for all analytes while the retention times ranged from 2.3 to 31 min. The method was linear (r² > 0.999) and reliable since the accuracy (recovery = 100 ± 2.9) and the precision (relative standard deviation < 2%) met International Conference on Harmonization guidelines. The technique was shown to be a useful tool for separating complex mixtures using experimental design methodology.     

Adduct supported analysis of γ-hydroxybutyrate in human serum with LC-MS/MS

To avoid the detection of small fragmentation products of γ-hydroxybutyrate (GHB), a liquid chromatography–tandem mass spectrometry GHB quantification method in human serum supported by adduct formation was developed and validated. The continuous infusion of GHB/GHB-D6 made the identification of two adducts possible and GHB/GHB-D6 sodium acetate adduct fragmentation was used as target mass transition. A Luna 5 μm C18 (2) 100 A, 150 mm?×?2 mm analytical column and elution with a programmed flow of the mobile phase consisting of 10 % A (H₂O/methanol = 95/5, v/v) and 90 % B (H₂O/methanol = 3/97, v/v), both with 10 mM ammonium acetate and 0.1 % acetic acid (pH?=?3.2), were used. Protein precipitation with 1 mL of the mobile phase B was used as the sample preparation. The calculated limit of detection/quantification was 1 μg/mL. The presented study shows that the fragmentation of GHB sodium acetate adducts is an effective way of quantification of this small molecule and is an interesting alternative to other methods based on the detection of ions smaller than 85 Da. This fact together with the short analysis time of 3 min and the fast sample preparation make this method very attractive for forensic/clinical application.     

A Simple and Sensitive LC Method for Quantification of Cefteram in Human Plasma

A simple and sensitive liquid chromatographic method was developed for quantification of cefteram in human plasma. Amoxicillin was used as an internal standard. The present method used protein precipitation for extraction of cefteram from human plasma. Separation was carried out on a reversed-phase C₁₈ column. The column effluent was monitored by UV detection at 262 nm. The mobile phase was a mixture of methanol and water containing 0.3% v/v triethylamine and 0.6% v/v glacial acetic acid (35:65:0.3:0.6 v/v) at a flow rate of 0.30 mL min^?1. The column temperature was 20 °C. This method was linear over the range of 47.5–4,750.0 ng mL^?1 with determination coefficient greater than 0.99. The mean extraction recovery of cefteram and IS was ≥76.82 and ≥76.49%, respectively, and the method was found to be precise, accurate, and specific during the study. The method was successfully applied for a pharmacokinetic study of cefteram in human.     

Improving the Determination of Nitrovin in Feeds by Reversed-Phase LC with SPE

A simple reversed-phase liquid chromatographic method with ultraviolet detector (378 nm) for the determination of nitrovin in feeds was improved and validated. The mobile phase was a mixture of acetonitrile and 0.1% formic acid solution (v/v) in the ratio of 50:50 (v/v), and the flow rate was set at 1.2 mL min^?1. The extraction solution was a mixture of dimethyl formamide, acetonitrile and methanol (50:25:25, v/v), the sample was cleaned-up with reversed-phase solid phase extraction cartridge. The standard nitrovin was purified with crude nitrovin product by ethylene glycol monoethyl ether and identified by elemental analyzer. The limit of detection was 0.05 mg kg^?1 and the limit of quatification was 0.2 mg kg^?1 in feeds. The assay had satisfactory selectivity, recovery, linearity and precise repeatability and trueness.     

Potentiometric and spectrophotometric pKa determination of water-insoluble compounds: validation study in a new cosolvent system

In this paper the validation of pK_a determination in MDM-water mixtures is presented. The MDM-water mixture is a new multicomponent cosolvent mixture (consisting of equal volumes of methanol, dioxane and acetonitrile, as organic solvents) that dissolves a wide range of poorly water-soluble compounds. The cosolvent dissociation constants (p_sK_a) of 50 chemically diverse compounds (acids, bases and ampholytes) were measured in 15-56 wt% MDM-water mixtures by potentiometric or spectrophotometric titration and the aqueous pK_a values obtained by extrapolation. Three different extrapolation procedures were compared in order to choose the best extrapolation in MDM-water mixture using a sub-set of 30 water-soluble compounds. The extrapolated results are in good agreement with pK_a values measured in aqueous medium. No significant difference was found among these extrapolation procedures thus the widely used Yasuda-Shedlovsky plot was proposed for MDM cosolvent also. Further we also present that the single point estimation based on measurement in 20%/v MDM-mixture using a general calibration equation may be suitable for rapid pK_a determination in the early phase of drug research.     

Determination of Flavonoid Markers in Honey with SPE and LC using Experimental Design

Determination of flavonoid markers quercetin, hesperetin, and chrysin, found in north Iranian citrus honey samples, was carried out by solid phase extraction (SPE) and isocratic liquid chromatographic separation using central composite design. Optimum conditions for SPE were achieved using 10 mL methanol/water (13:87, v/v, pH = 7) as the washing solvent and 4 mL methanol for elution. Good clean-up and high recovery >90% were observed for all analytes. The use of water/ACN/THF/AcOH (54:36:5:5, v/v) was found to serve as the optimum mobile phase composition and allowed for the separation of analytes from endogenous compounds present in honey. SPE parameters, such as maximum loading capacity and breakthrough volume, were also determined for each analyte. Limit of detection, linear range, recovery, repeatability of retention times, and peak heights were 3.11 × 10^?8–4.44 × 10^?8 g g^?1, 0.50–50.0 μg mL^?1 (R ² > 0.99), 90.7–96.9%, 3.0–3.6%, and 1.0–2.6%, respectively. Precision of the overall analytical procedure, estimated by five replicate measurements for quercetin, hesperetin and chrysin in citrus honey, as well as the relative standard deviations were 4.3%, 3.8%, and 5.5%, respectively.