Controlled drug release from gels using lipophilic interactions of charged substances with surfactants and polymers

The aim of this article was to study interactions between different gel forming polymers and amphiphilic drugs and surfactants with the intention of finding interactions that can be used for designing controlled release formulations. The release from gels was measured by detecting the UV-absorbance of drugs released from 6 mL gel into 250 mL release medium in a dissolution bath. The rheological behavior of gels was characterized using a controlled rate rheometer. The diffusion coefficient of alprenolol was 6.3 x 10(-6) cm(2)/s when formulated in a 1% poly(acrylic acid) gel (PAA) and 2.8 x 10(-6) cm(2)/s in a lipophilically modified gel (LM-PAA). The addition of alprenolol to 1% LM-PAA increased the elasticity, G', from 123 to 182 Pa. Increased gel strength was also observed for a number of other amphiphilic drugs. The addition of 1% Brij 58 to LM-PAA decreased the diffusion coefficient of alprenolol to 2.3 x 10(-6) cm(2)/s. It was possible to sustain the release of charged drugs with high log P by adding surfactant micelles. However, the effect was small and only useful for drugs with adequate lipophilicity. The interaction between LM-PAA and amphiphilic drugs could be seen using rheology and was used for designing controlled release gel formulations. In this way surfactants can be avoided, thus decreasing toxicity problems.     

Native protein blotting after isoelectric focusing in fabric reinforced polyacrylamide gels in carrier ampholyte generated or immobilized pH gradients

An optimized procedure for the preparation of fabric reinforced polyacrylamide gels for native protein blotting is described. The gels, typically 5% T, 3% C, were internally stabilized with the aid of an AcrylAide-pretreated, hydrophilized polyester fabric, preferably with a 60 microns mesh opening. Ultrathin (120-180 microns) gels were prepared with the flap technique and 500 microns gels with the cassette technique; 500 microns gels with immobilized pH gradients were cast using precision molds and a computer controlled mixing device of four burettes. The fabric reinforced gels could be used either wet or after drying and rehydration. Isoelectric focusing was performed in carrier ampholyte pH gradients or hybrid immobilized pH gradients, supplemented with 1-3% w/v carrier ampholytes. Incorporation of 40-60% w/v glycerol into the gels decisively improved their operational properties. The high glycerol gels, which tolerated field strengths of 900-1700 V/cm for extended periods under steady state focusing conditions, were not afflicted by liquid exudation on the gel surface and showed retarded diffusion of the separated proteins on termination of focusing. By unidirectional capillary blotting, with an intermediate dialysis membrane eliminating bidirectional protein transfer, proteins were blotted to 0.1-0.2 micron pore size nitrocellulose membranes in 10-20 min from ultrathin gels and in 30-60 min from 500 microns gels. Based on quantification of residual protein in the gels after blotting, a transfer efficiency of 60-87% was found for the ultrathin and 53-69% for the 500 microns gels. Semidry electrophoretic blotting was carried out in a modified setup with cooled graphite electrodes. In a continuous Tris-glycine buffer system electrophoretic blotting required only 2-5 min with ultrathin gels and 20 min with 500 microns gels. Marker proteins, including horse spleen ferritin (Mr465,000), could be transferred with 91-96% efficiency.     

Energy transfer of highly vibrationally excited 2-methylnaphthalene: Methylation effects

The methylation effects in the energy transfer between Kr atoms and highly vibrationally excited 2-methylnaphthalene in the triplet state were investigated using crossed-beam/time-sliced velocity-map ion imaging at a translational collision energy of approximately 520 cm(-1). Comparison of the energy transfer between naphthalene and 2-methylnaphthalene shows that the difference in total collisional cross section and the difference in energy transfer probability density functions are small. The ratio of the total cross sections is sigma(naphthalene): sigma(methylnaphthalene)=1.08+/-0.05:1. The energy transfer probability density function shows that naphthalene has a little larger probability at small T-->VR energy transfer, DeltaE(u)<300 cm(-1), and 2-methylnaphthalene has a little larger probability at large V-->T energy transfer, -800 cm(-1)相似文献   

A general method for the rapid characterization of tyrosine-phosphorylated proteins by mini two-dimensional gel electrophoresis

Our preliminary results are reported in the investigation of the tyrosine phosphorylation cascade triggered by the stimulation of the insulin receptor in the adipocyte cell line 3T3-L1 using a mini two-dimensional gel electrophoresis approach. The minigel format, 8 x 10 cm, was found sufficiently resolving and reproducible to study complex biological samples while considerably increasing throughput and lowering costs compared to larger gel formats. Consequently, we used the minigel format to rapidly screen a large number of samples, of which only the most relevant were then analyzed by optimized, preparative two-dimensional gels. The accurate localization and relative quantification of tyrosine-phosphorylated proteins was performed using a nonradioactive triple labeling method. After transfer onto polyvinylidene difluoride (PVDF) membranes, proteins were stained with Sypro Ruby to verify the separation quality and to localize the general region of interest for immunostaining. The membranes were subsequently blocked with polyvinylpyrrolidone-40 and probed with the relevant antibodies for visualization of the phosphorylated proteins by chemiluminescence. Finally, membranes were stained with colloidal gold to obtain a pattern reminiscent of the silver staining of a polyacrylamide gel. We believe that the presented strategy can be generalized for any gel application in which a protein has to be detected and identified based on its immunoreactivity.     

Electronic gel protein transfer and identification using matrix-assisted laser desorption/ionization-mass spectrometry

An electronic protein transfer technique is described for achieving the rapid and efficient recovery of sodium dodecyl sulfate (SDS)-protein complexes from polyacrylamide gels. This process involves the use of small-dimension capillaries in physical contact with a resolved protein band within the polyacrylamide gel, providing a large potential drop and high electric field strength at the capillary/gel interface. Several factors controlling the electronic protein transfer, including the applied electric field strength, the electrophoresis buffer concentration, and the capillary dimension, are studied to further enhance the use of field-amplification for sample stacking of extracted SDS-protein complexes. As a result of sample stacking, the extracted proteins from a 50 ng gel loading are present in a narrow ( approximately 80 nL) and highly concentrated (0.46 mg/mL or 3.3 x 10(-5) M for cytochrome c) solution plug. Three model proteins with molecular mass ranging from 14 kDa (cytochrome c) to 116 kDa (beta-galactosidase) are stained by Coomassie blue and electrophoretically extracted from gels with protein loadings as low as 50 ng. The capillary format of the electronic protein transfer technique allows direct deposition of extracted proteins onto a matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) target. Various matrices and solvent compositions are evaluated for the analysis of extracted and concentrated SDS-protein complexes using MALDI-MS. The electronic protein transfer technique, when operated under optimized conditions, is demonstrated for the effective (>70% recovery), speedy (less than 5 min), and sensitive MS identification of gel resolved proteins (as low as 50 ng).     

Differences in the spatial and quantitative reproducibility between two second-dimensional gel electrophoresis systems

Two-dimensional polyacrylamide gel electrophoresis (PAGE), together with 2-D gel electrophoresis (GE) analysis software, is a common technique to analyze a complex proteome. In order to accurately locate the differentially expressed proteins in human pituitary macroadenoma tissues in our long-term research program to clarify the molecular mechanisms of macroadenoma formation, a reproducible separation system is needed. An immobilized pH-gradient dry gel-strip (IPG strip) has been extensively used for first-dimensional isoelectric focusing (IEF), and has achieved a high degree of reproducibility in the IEF direction. For the second dimension (SDS-PAGE), different types of gel systems are available, including horizontal vs. vertical gel systems, and gradient vs. constant-percentage gels. A typical horizontal system is the Multiphor II system that analyzes one gel at a time, using a precast gradient gel (180 x 245 x 0.5 mm), and a typical vertical system is the Dodeca system, which analyzes up to 12 gels at a time, using usually a single-concentration gel (190 x 205 x 1 mm). The present study evaluated the spatial and quantitative reproducibility of the two systems for the separation of the complex human pituitary proteome. PDQuest software was used to analyze the digitized gel-image data, and SPSS statistical software was used to analyze the data. The results demonstrated a high percentage (>99%) of protein-spot matches within each electrophoretic system. The Dodeca gel system demonstrated better between-gel reproducibility for spot position, higher resolution in the Sodium dodecyl sulfate (SDS)-PAGE direction, lower gel background, better spot quality, and higher reproducibility of the spot volume.     

Temperature dependence and kinetic isotope effects for the OH + HBr reaction and H/D isotopic variants at low temperatures (53-135 K) measured using a pulsed supersonic Laval nozzle flow reactor

The reactions of OH + HBr and all isotopic variants have been measured in a pulsed supersonic Laval nozzle flow reactor between 53 and 135 K, using a pulsed DC discharge to create the radical species and laser induced fluorescence on the A 2sigma <-- X 2pi (v' = 1 <-- v' = 0) transition. All reactions are found to possess an inverse temperature dependence, in accord with previous work, and are fit to the form k = A(T/298)(-n), with k1 (OH + HBr) = (10.84 +/- 0.31) x 10(-12) (T/298)(-0.67+/-0.02) cm3/s, k2 (OD + HBr) = (6.43 +/- 2.60) x 10(-12) (T/298)(-1.19+/-0.26) cm3/s, k3 (OH + DBr) = (5.89 +/- 1.93) x 10(-12) (T/298)(-0.76+/-0.22) cm3/s, and k4 (OD + DBr) = (4.71 +/- 1.56) x 10(-12) (T/298)(-1.09+/-0.21) cm3/s. A global fit of k vs T over the temperature range 23-360 K, including the new OH + HBr data, yields kT = (1.06 +/- 0.02) x 10(-11) (T/298)(-0.90+/-0.11) cm3/s, and (0.96 +/- 0.02) x 10(-11) (T/298)(-0.90+/-0.03) exp((-2.88+/-1.82 K)/T) cm3/s, in accord with previous fits. In addition, the primary and secondary kinetic isotope effects are found to be independent of temperature within experimental error over the range investigated and take on the value of (kH/kD)(AVG) = 1.64 for the primary effect and (kH/kD)(AVG) = 0.87 for the secondary effect. These results are discussed within the context of current experimental and theoretical work.     

Vertical agarose gel electrophoresis and electroblotting of high-molecular-weight proteins

The electrophoretic separation of high-molecular-weight proteins (> 500 kDa) using polyacrylamide is difficult because gels with a large enough pore size for adequate protein mobility are mechanically unstable. A 1% vertical sodium dodecyl sulfate (SDS)-agarose gel electrophoresis (VAGE) system has been developed that allows titin (a protein with the largest known SDS subunit size of 3000-4000 kDa) to migrate over 10 cm in a approximately 13 cm resolving gel. Such migration gives clear and reproducible separation of titin isoforms. Proteins ranging in size from myosin heavy chain ( approximately 220 kDa) up to titin can be resolved on this gel system. Electroblotting of these very large proteins was nearly 100% efficient. This VAGE system has revealed two titin size variants in rabbit psoas muscle, two N2BA bands in rabbit cardiac muscle, and species differences between titins from rat and rabbit muscle. Agarose electrophoresis should be the method of choice for separation and blotting of proteins with very large subunit sizes.     

Determination of molecular weight of native proteins by polyacrylamide gradient gel electrophoresis

An improved method for the estimation of molecular weights of native proteins by polyacrylamide gel electrophoresis, in 9 cm x 9 cm x 0.05 mm 4-20% T fabric reinforced gradient gels, is described. Plotting the logarithm of the relative mobilities of proteins versus gel concentrations produces lines whose slopes are related to molecular weights.     

ESR and optical study of Mn2+-doped sodium hydrogen orthophosphate dihydrate

ESR study of Mn(2+)-doped sodium hydrogen orthophosphate dihydrate (SHOD) single crystals is done at room temperature. The Mn(2+) spin-Hamiltonian parameters have been evaluated employing a large number of resonant line positions observed for different orientations of the external magnetic field. The values of g, A, B, D, E and a are: 2.0042+/-0.0002, 86+/-2 x 10(-4)cm(-1), 83+/-2 x 10(-4)cm(-1), 238+/-2 x 10(-4)cm(-1), 76+/-2 x 10(-4)cm(-1), 13+/-1 x 10(-4)cm(-1) for site I and 2.0032+/-0.0002, 86+/-2 x 10(-4)cm(-1), 83+/-2 x 10(-4)cm(-1), 238+/-2 x 10(-4)cm(-1), 76+/-2 x 10(-4)cm(-1), 13+/-1 x 10(-4)cm(-1) for site II, respectively. The optical absorption study of the crystal is also done. The observed bands are assigned as transitions from the (6)A(1g)(S) ground state to various excited quartet levels of a Mn(2+) ion in a cubic crystalline field. These bands are fitted with four parameters B, C, D(q) and alpha and the values found for the parameters are B=777 cm(-1), C=3073 cm(-1), D(q)=755 cm(-1), and alpha=76 cm(-1). On the basis of the data obtained the surrounding crystalline field and the nature of metal-ligand bonding are discussed.     

Measurement of the dependence of interfacial charge-transfer rate constants on the reorganization energy of redox species at n-ZnO/H2O interfaces

The interfacial energetic and kinetics behavior of n-ZnO/H2O contacts have been determined for a series of compounds, cobalt trisbipyridine (Co(bpy)3(3+/2+)), ruthenium pentaamine pyridine (Ru(NH3)5 py(3+/2+)), cobalt bis-1,4,7-trithiacyclononane (Co(TTCN)2(3+/2+)), and osmium bis-dimethyl bipyridine bis-imidazole (Os(Me2bpy)2(Im)2(3+/2+)), which have similar formal reduction potentials yet which have reorganization energies that span approximately 1 eV. Differential capacitance vs potential and current density vs potential measurements were used to measure the interfacial electron-transfer rate constants for this series of one-electron outer-sphere redox couples. Each interface displayed a first-order dependence on the concentration of redox acceptor species and a first-order dependence on the concentration of electrons in the conduction band at the semiconductor surface, in accord with expectations for the ideal model of a semiconductor/liquid contact. Rate constants varied from 1 x 10(-19) to 6 x 10(-17) cm4 s(-1). The interfacial electron-transfer rate constant decreased as the reorganization energy, lambda, of the acceptor species increased, and a plot of the logarithm of the electron-transfer rate constant vs (lambda + deltaG(o)')(2)/4lambda k(B)T (where deltaG(o)' is the driving force for interfacial charge transfer) was linear with a slope of approximately -1. The rate constant at optimal exoergicity was found to be approximately 5 x 10(-17) cm4 s(-1) for this system. These results show that interfacial electron-transfer rate constants at semiconductor electrodes are in good agreement with the predictions of a Marcus-type model of interfacial electron-transfer reactions.     

An optimized method for the isolation and identification of membrane proteins

The purpose of this study was to develop a protocol suitable for membrane protein extraction from limited starting material and to identify appropriate conditions for two-dimensional (2-D) gel electrophoresis. We used A549 cells, a human alveolar type II cell line, and evaluated three protein extraction methods based on different separation principles, namely protein solubility, detergent-based and density-based organelle separation. Detergent-based extraction achieved the highest yield with 14.64% +/- 2.35 membrane proteins but sequential extraction with 7.35% +/- 0.78 yield and centrifugal extraction with 4.1% +/- 0.54 yield produced the purest fractionation of membrane proteins. Only the sequential and the detergent-based extraction proved suitable for small volumes of starting material. We identified annexin I + II, electron transfer flavoprotein beta-chain, H(+)-transporting ATP synthase, mitofilin and protein disulfide isomerase A3 as membrane and cytokeratin 8 + 18, actin and others as soluble proteins using matrix assisted laser desorption/ionization-time of flight (MALDI-TOF) analysis and started to map the A549 cell proteome. Our data suggest that membrane proteins can be extracted efficiently from small samples using a simple sequential protein extraction method. They can be separated and identified successfully using optimized conditions in 2-D gel electrophoresis. The presented methods will be useful for further investigations of membrane proteins of alveolar and bronchial carcinomas.     

Discontinuous buffer system for polyacrylamide and agarose gel electrophoresis of DNA fragments

DNA fragments up to 9 kb in size were stacked and separated by polyacrylamide gel electrophoresis, and those up to 50 kb in size by agarose gel electrophoresis, using a discontinuous buffer system. Polyacrylamide gels at pH 8.9, 2 degrees C, 0.01 M ionic strength, yielded sharp bands with DNA loads of 8 micrograms/cm2 of gel of a mixture of 19 DNA fragments in the size range of 72-23130 bp, while agarose gels at pH 8.5, 25 degrees C, provided well-resolved, unperturbed bands at 0.04 M ionic strength with DNA loads of 1 microgram/cm2 of the same mixture. Note that the ionic strength of the agarose gels is comparable to the conventionally used 0.5 x TBE (Tris-borate-EDTA) buffer, while that successfully applied to polyacrylamide is seven-fold less than the ionic strength of conventionally used 1 x TBE buffer, with a substantially shorter duration of electrophoresis as a result. The application of a discontinuous buffer system to the gel electrophoresis of DNA results in (i) Band identification by Rf, the migration distance relative to a sharply defined "buffer front" (moving boundary). This is sufficiently labor saving, compared to determining absolute mobilities, so as to render practical the expression of bands as numbers, with benefits for data storage, statistical manipulations and physico-chemical exploitation of mobility data. The use of Rf's also circumvents loss of precision in mobility measurement resulting from progressive band spreading of dye bands used as a front. (ii) A uniformly and highly concentrated starting zone, beneficial to resolution, is obtained, without the losses by which separate concentration steps are usually burdened.(ABSTRACT TRUNCATED AT 250 WORDS)     

Kinetic studies of the ClO + ClO association reaction as a function of temperature and pressure

The kinetics of the association reaction of ClO radicals: ClO + ClO + M --> Cl2O2+ M (1), have been investigated as a function of temperature T between 206.0-298.0 K and pressure p between 25-760 Torr using flash photolysis with time-resolved UV absorption spectroscopy. ClO radicals were generated following the photolysis of Br2/Cl2O mixtures in nitrogen diluent gas. Charge coupled device (CCD) detection of time resolved absorptions was used to monitor ClO radicals over a broad wavelength window covering the ClO (A 2Pi<-- X 2Pi) vibronic absorption bands. The high pass filtered ClO absorption cross sections were calibrated as a function of temperature between T = 206.0-320 K, and exhibit a negative temperature dependence. The ClO association kinetics were found to be more rapid than those reported in previous studies, with limiting low and high pressure rate coefficients, in nitrogen bath gas, k0 = (2.78 +/- 0.82) x 10(-32) x (T/300)(-3.99 +/- 0.94) molecule(-2) cm6 s(-1) and k(infinity) = (3.37 +/- 1.67) x 10(-12) x (T/300)(-1.49 +/- 1.81) molecule(-1) cm3 s(-1), respectively, (obtained with the broadening factor F(c) fixed at 0.6). Errors are 2sigma. The pressure dependent ClO association rate coefficients (falloff curves) exhibited some discrepancies at low pressures, with higher than expected rate coefficients on the basis of extrapolation from high pressures (p > 100 Torr). Reanalysis of data excluding kinetic data recorded below p = 100 Torr gave k0 = (2.79 +/- 0.85) x 10(-32) x (T/300)(-3.78 +/- 0.98) molecule(-2) cm6 s(-1) and k(infinity) = (3.44 +/- 1.83)x 10(-12) x (T/300)(-1.73 +/- 1.91) molecule(-1) cm3 s(-1). Potential sources of the low pressure discrepancies are discussed. The expression for k(0) in air bath gas is k0 = (2.62 +/- 0.80) x 10(-32) x (T/300)(-3.78 +/- 0.98) molecule(-2) cm6 s(-1). These results support upward revision of the ClO association rate coefficient recommended for use in stratospheric models, and the stratospheric implications of the results reported here are briefly discussed.     

Gas-phase rate coefficients for the reactions of nitrate radicals with (Z)-pent-2-ene, (E)-pent-2-ene, (Z)-hex-2-ene, (E)-hex-2-ene, (Z)-hex-3-ene, (E)-hex-3-ene and (E)-3-methylpent-2-ene at room temperature

Rate coefficients for reactions of nitrate radicals (NO3) with (Z)-pent-2-ene, (E)-pent-2-ene, (Z)-hex-2-ene, (E)-hex-2-ene, (Z)-hex-3-ene, (E)-hex-3-ene and (E)-3-methylpent-2-ene were determined to be (6.55 +/- 0.78)x 10(-13) cm3 molecule(-1) s(-1), (3.78 +/- 0.45)x 10(-13) cm3 molecule(-1) s(-1), (5.30 +/- 0.73)x 10(-13) cm(3) molecule(-1) s(-1), (3.83 +/- 0.47)x 10(-13) cm(3) molecule(-1) s(-1), (4.37 +/- 0.49)x 10(-13) cm(3) molecule(-1) s(-1), (3.61 +/- 0.40)x 10(-13) cm3 molecule(-1) s(-1) and (8.9 +/- 1.5)x 10(-12) cm3 molecule(-1) s(-1), respectively. We performed kinetic experiments at room temperature and atmospheric pressure using a relative-rate technique with GC-FID analysis. The experimental results demonstrate a surprisingly large cis-trans(Z-E) effect, particularly in the case of the pent-2-enes, where the ratio of rate coefficients is ca. 1.7. Rate coefficients are discussed in terms of electronic and steric influences, and our results give some insight into the effects of chain length and position of the double bond on the reaction of NO3 with unsaturated hydrocarbons. Atmospheric lifetimes were calculated with respect to important oxidants in the troposphere for the alkenes studied, and NO3-initiated oxidation is found to be the dominant degradation route for (Z)-pent-2-ene, (Z)-hex-3-ene and (E)-3-methylpent-2-ene.     

Kinetics of the reactions of CH2Br and CH2I radicals with molecular oxygen at atmospheric temperatures

The kinetics of the reactions of CH2Br and CH2I radicals with O2 have been studied in direct measurements using a tubular flow reactor coupled to a photoionization mass spectrometer. The radicals have been homogeneously generated by pulsed laser photolysis of appropriate precursors at 193 or 248 nm. Decays of radical concentrations have been monitored in time-resolved measurements to obtain the reaction rate coefficients under pseudo-first-order conditions with the amount of O2 being in large excess over radical concentrations. No buffer gas density dependence was observed for the CH2I + O2 reaction in the range 0.2-15 x 10(17) cm(-3) of He at 298 K. In this same density range the CH2Br + O2 reaction was obtained to be in the third-body and fall-off area. Measured bimolecular rate coefficient of the CH2I + O2 reaction is found to depend on temperature as k(CH2I + O2)=(1.39 +/- 0.01)x 10(-12)(T/300 K)(-1.55 +/- 0.06) cm3 s(-1)(220-450 K). Obtained primary products of this reaction are I atom and IO radical and the yield of I-atom is significant. The rate coefficient and temperature dependence of the CH2Br + O2 reaction in the third-body region is k(CH2Br + O2+ He)=(1.2 +/- 0.2)x 10(-30)(T/300 K)(-4.8 +/- 0.3) cm6 s(-1)(241-363 K), which was obtained by fitting the complete data set simultaneously to a Troe expression with the F(cent) value of 0.4. Estimated overall uncertainties in the measured reaction rate coefficients are about +/-25%.     

Strategies for internal amino acid sequence analysis of proteins separated by polyacrylamide gel electrophoresis

An evaluation has been made of various strategies for obtaining internal amino acid sequence data from electrophoretically separated proteins. Electroblotting, in situ proteolysis and extraction, and direct electroelution are compared. Electroblotting of protein or peptides from gels resulted in poor yields (typically, 1-7%). However, higher yields (3-67%) were achieved by in situ enzymatic cleavage followed by acid extraction of the peptides from the gel. Peptides extracted from the gel were separated by reversed-phase high-performance liquid chromatography (RP-HPLC), on short, small-bore columns (100 x 2.1 mm I.D.), to enable recovery of peptides in small volumes (ca. 50 microliters) suitable for microsequence analysis. Capillary zone electrophoresis under acidic conditions (pH 2.5) was used to assess peptide purity before sequence analysis. Cysteine residues were identified in unmodified proteins or peptides by a characteristic phenylthiohydantoin (PTH)-amino acid derivative during sequence analysis. This derivative does not co-chromatograph with any known PTH-amino acid. Direct electrophoretic elution of protein from gels yielded between 45-50% of applied protein. Proteins recovered from gels by electrophoretic elution required further purification by inverse-gradient RP-HPLC [R. J. Simpson, R. L. Moritz, E. C. Nice and B. Grego, Eur. J. Biochem., 165 (1987) 21] to remove sodium dodecylsulphate and acrylamide-related contaminants for sequence analysis.     

Protein diffusion in charged polyacrylamide gels. Visualization and analysis

Protein diffusion in anionic, cross-linked polyacrylamide-based gels supported in fused-silica capillaries was characterized by a direct visualization method. Microphotography was used to obtain transient protein concentration profiles in these gels using cytochrome c as a probe molecule. Gels based on acrylamido-methylpropane sulfonic acid with 2.5-10% N,N'-methylene-bisacrylamide as a cross-linker and with a total polymer concentration of 0.21 g/cm3 yielded diffuse protein concentration profiles which were quantitatively consistent with a Fickian diffusion model. An analytical method was developed to calculate the diffusivity as a function of protein concentration in the gel from the experimental profiles. The diffusivity was found to assume values in the range 2.5-5.5x10(-8) cm2/s and varied somewhat with the protein concentration in the gel. The effects of some of the polymer properties, such as cross-link density, polymer concentration and charge, were also investigated for a limited range of conditions to derive qualitative trends. Results showed that the transport rates increased with a decrease in the cross-link density, were extremely reduced when the polymer concentration was doubled, and were slightly increased when the charge density was decreased by half by polymerizing a 1:1 mixture of acrylamide and acrylamido-methylpropane sulfonic acid monomers.     

Single-component and mixed ferrocene-terminated alkyl monolayers covalently bound to Si(111) surfaces

Self-assembled ferrocene monolayers covalently bound to monocrystalline Si(111) surfaces have been prepared from the attachment of an amine-substituted ferrocene derivative to a pre-assembled acid-terminated alkyl monolayer using carbodiimide coupling. This derivatization strategy yielded nanometer-scale clean, densely packed monolayers, with the ferrocene units being more than 20 A from the semiconductor surface. The amount of immobilized electroactive units could be varied in the range 2 x 10(-11) to approximately 3.5 x 10(-10) mol cm(-2) by diluting the ferrocene-terminated chains by inert n-decyl chains. The highest coverage obtained for the single-component monolayer corresponded to 0.25-0.27 bound ferrocene per surface silicon atom. The electrochemical characteristics of the mixed n-decyl/ferrocene-terminated monolayers were found to not depend significantly on the surface coverage of ferrocene units. The reversible one-electron wave of the ferrocene/ferrocenium couple was observed at E degrees ' = 0.50 +/- 0.01 V vs SCE, and the rate constant of electron transfer kapp was about 50 s(-1).