Syntheses and reactions of functional polymers. XLVI. Preparation and reactions of N-benzyloxyisomaleimide–styrene copolymer

Polymerization of N-benzyloxymaleimide(I) was attempted to obtain a polymer with the N-hydroxysuccinimide unit in the chain. In the light of infrared and NMR data the compound reported by Ames as N-benzyloxymaleimide is N-benzyloxyisomaleimide (III). Homopolymerization of III did not give polymer. Copolymerization of III with styrene was carried out in dioxane at 70°C. A strong alternation tendency like that of maleimides was observed. Monomer reactivity ratios and Q-e values were determined. Copolymer having the isoimide structure showed infrared absorptions at 1815 and 1675 cm^?1 in the carbonyl region. The copolymer was isomerized to N-benzyloxymaleimide type copolymer and debenzylated to N-hydroxymaleimide type copolymer. An insoluble copolymer was prepared by using divinylbenzene as a crosslinking agent and was converted to N-acetoxymaleimide type copolymer, which was used as an insoluble acetylating agent.     

Syntheses and reactions of functional polymers. XCIII. Syntheses of polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide structure in the chain and the use of these activated polymer esters of N-blocked amino acids or peptides

Polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide residue were designed in order to achieve acyl activation of a reacting carboxylic acid in the solid phase. These polymers were prepared through the following three routes: (a) styrene was allowed to copolymerize with N-(4-hydroxy-3-nitrophenyl)- or N-(4-acetoxy-3-nitrophenyl)maleimide, (b) styrene was copolymerized with N-(4-acetoxyphenyl)maleimide in the presence of divinylbenzene (DVB), and the copolymer obtained was hydrolyzed and nitrated, (c) a copolymer of maleic anhydride and styrene was reacted with p-aminophenol, followed by nitration. The polymers prepared by routes b and c were converted to the activated polymer esters of N-blocked amino acids and peptides by using dicyclohexylcarbodiimide (DCC). The acylated polymers thus obtained were treated with amino acid esters and found to give peptides quantitatively without racemization.     

Syntheses and reactions of porphyrin and metalloporphyrin polymers

Various porphyrin functions such as protoporphyrin IX and chlorin a as well as metalloporphyrin functions such as Mg(II)– and Cu(II)–chlorophyllin a and Fe(III)– and Co(II)–protoporphyrin IX were incorporated into vinyl polymers by preparation and polymerization of their p-vinylbenzyl esters. The porphyrin function was also incorporated by reaction of poly-p-chloromethylstyrene with porphyrins or metalloporphyrins or by the reaction of p-aminostyrene polymers with chlorophyll b through Schiff-base formation. Mg(II)–porphyrin polymers were found to be remarkably effective as catalysts in photoredox systems; porphyrin polymers without central metal atoms were also effective to a lesser extent.     

Preparation and properties of polymers with biphenyl units in the chain: Syntheses of solvent-soluble substituted polyphenylenes

Benzidinetetrazonium chloride (BTC)–CuCl and BTC–FeCl₂ complexes were thermally converted to benzene-soluble poly-4,4′-biphenylene plus small amounts of insoluble material. The soluble fraction was more stable than the insoluble fraction when heated at 300–500°C, although the solubility decreased. BTC in water was converted to an insoluble material by addition of alkali or cuprous ammonia solution. The C/(H + Cl) ratio indicated the existence of three to five side groups for each twenty phenyl groups of the insoluble fraction, while that of the soluble fraction showed few such groups. The number increased to one or more side groups for each phenyl nucleus as both soluble and insoluble fractions were heated to 500°C. A thin film of soluble fraction deposited on a copper plate showed an electrical conductivity in the range 10^?2–10^?3 ohm^?1 cm^?1 at 25°C and an energy gap (ΔE_g) of 0.2–0.3 eV. However, a compressed specimen of the same soluble fraction showed little conductivity. Solventsoluble samples of substituted poly-4,4,-biphenylene were prepared by the same procedure. These materials cracked on processing, and accurate conductivity measurements could not be made.     

Syntheses and crosslinking reactions of polymers containing spiroorthoester moieties

The radical copolymerization of unsaturated spiroorthoesters such as 2-methylene-1,4,6-trioxaspiro[4.6]undecane (SOE I) and 2-methylene-9-methyl-1,4,6-trioxaspiro[4,5]decane (SOE II) with vinyl monomers was carried out to find that SOE I and SOE II were copolymerized with electron-poor olefins such as methyl acrylate, acrylonitrile, and methyl methacrylate to obtain the corresponding copolymers containing spiroorthoester moieties, respectively. The obtained copolymers were treated with BF₃.OEt₂ or BzS⁺SbF to afford crosslinked polymers undergoing expansion in volume on crosslinking in those cases of copolymers of SOE I.     

Syntheses and properties of polyamides from ether diacid having the spirobichroman unit

A novel hexamethylspirobichroman (HMSBC) unit-containing dicarboxylic acid, 6,6′-bis(4-carboxyphenoxy)-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman ( 3 ), was derived from nucleophilic substitution of p-fluorobenzonitrile with the phenolate ion of 6,6′-dihydroxy-4,4,4′,4′,7,7′-hexamethyl-2,2′-spirobichroman ( 1 ), followed by alkaline hydrolysis of the intermediate bis(ether nitrile). Using TPP and pyridine as condensing agents, a series of polyamides with inherent viscosities in the range of 0.82–1.14 dL/g were prepared by the direct polycondensation of dicarboxylic acid 3 with various aromatic diamines. All the obtained polymers were noncrystalline and soluble in various organic solvents such as N,N-dimethylacetamide (DMAc) and N-methyl-2-pyrrolidone (NMP). Except for the polymer derived from benzidine, the other polyamides could be solution cast into transparent and tough films, and their tensile strengths, elongations at break, and tensile moduli were in the range of 56–76 MPa, 4–59%, and 1.6–2.0 GPa, respectively. These polyamides had glass transition temperatures in the range of 183–200°C with 10% weight loss above 420°C. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1479–1486, 1997     

Photochemical reactions of high polymers. XIV. Syntheses and photochemical reactions of copolymers bearing O-acyloxime groups

Copolymers bearing pendant O-acyloxime groups were synthesized by two methods: copolymerizations of oxime acrylate (methyl β-naphthyl ketone oxime acrylate or benzophenone oxime acrylate) and styrene, condensation of acrylic acid—styrene copolymer with oximes (benzophenone oxime, p-nitrobenzophenone oxime, methyl β-naphthyl ketone oxime, benzalacetone oxime or 9-fluorenone oxime). The photochemical behavior of the O-acyloxime copolymers changed markedly with the irradiation conditions: irradiation of benzene solutions led to degradation in air and crosslinking under nitrogen, while irradiation of solid films in air resulted in simultaneous degradation and crosslinking. Photolysis of methyl β-naphthyl ketone oxime acetate, a model for the O-acyloxime copolymer, in benzene solution under nitrogen resulted in scission of the N? O bond. The same reaction was observed in the irradiation of the O-acyloxime copolymers. It is suggested that formation of free radicals on the polymer chains via scission of the N? O bond is followed by decarboxylation. In the absence of oxygen, crosslinking of the polymer by recombination of the free radicals competes with degradation via β-scission. In the presence of oxygen, autoxidative degradation predominates.     

Bisindoles 33. Synthesis of water-soluble polymers having indole fragment in the polymer chain

Dimethylaminomethylation of polyamides and polyethers based on the di-acid chloride of .2, 2-dihydroxycarbonylbi (5-indolyl)oxide, and -sulfone, hexamethylenediamine, 4, 4'-diaminodiphenyloxide, and 2, 2-di(4hydroxy-3-chlorophenyl)propane has yielded gramine analogs which were converted into the corresponding water-soluble polyhydrochlorides, the preparation of sodium salts of several polyamides and polyamides containing indole fragments in the polymer chain is also described.For Communication 32, see [1].Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 1, pp. 40–44, January, 1994.     

Syntheses of vinyl polymers containing the N-phenothiazinyl group in the side chain

Four kinds of vinyl polymers containing N-substituted phenothiazinyl groups in side chains were obtained by syntheses of the respective monomers and subsequent polymerizations. Thus, N-acrylamidomethylphenothiazine, N-(N-acrylamidomethyl)carbamoylethyl phenothiazine, β-(N-phenothiazinyl)ethyl acrylate and methacrylate, and β-(N-phenothiazinyl)ethyl vinyl ether were synthesized. It was found that all monomers except the last monomer can be polymerized with typical free-radical initiators such as α,α′-azobisisobutyronitrile to afford stable soluble polymers with electron-donating characteristics, presumably due to the absence of a hydrogen atom at the site of the nitrogen atom of the phenothiazinyl group. The last monomer was found to be susceptible to typical cationic initiators such as boron trifluoride etherate to afford a stable soluble polymer also with the electron-donating characteristic.     

Syntheses and reactions of functional polymers. XCVII. Chemical activation and functionalization of poly(γ-methyl-L-glutamate)

To enhance its solubility in common solvents poly(γ-methyl-L -glutamate) (PMG) was transesterificated with ethylene chlorohydrin, ethylene cyanohydrin, and β,β,β-trichloroethanol, respectively. The aminolyses of the resulting polymers proceeded easily in pendant ester groups to give the corresponding amides in reasonable yields without main chain fission. By these procedures the incorporation of functional groups such as azide, amino acid, and thiol into PMG is successfully performed.     

Syntheses and properties of new photochromic diarylethene derivatives having a pyrazole unit

New photochromic diarylethenes 1a, 2a and 3a bearing a pyrazole unit have been synthesized. Their properties, including photochromic reactivity, fluorescence and electrochemical properties were investigated. These compounds showed good photochromic properties, high cycloreversion quantum yield and relatively strong fluorescence. The cycloreversion quantum yields of 1a, 2a and 3a are 0.46, 0.53 and 0.57, respectively, which are larger than those of their cyclization quantum yields (0.43, 0.45 and 0.47, respectively). The oxidations of diarylethenes 1a, 2a and 3a were initiated at 0.73, 1.11 and 0.79 V, respectively. Moreover, the position of the methoxyl substituent had remarkable impacts on the above optical and electrochemical properties.     

Functional monomers and polymers. XCV. Photochemical reactions on synthetic polymers having pendant thymine bases in polymethyl methacrylate film

The photodimerization reaction of synthetic polymers which contain thymine bases was studied in polymethyl methacrylate film. The quantum efficiency for the photodimerization of the thymine bases of polyacrylate and polymethacrylate, fixed in the polymethyl methacrylate film was measured. The value of the film was higher than those measured in solution.     

Syntheses and reactions of ferrocene-containing polymers. III. Cyclopolymerization of 1,1′-divinylferrocene

1,1′-Divinylferrocene was polymerized with BF₃OEt₂ and AIBN initiators. Polymers were separated into benzene-soluble and benzene-insoluble fractions, the latter probably being crosslinked. The polymers obtained with BF₃OEt₂ were shown by infrared and NMR spectroscopy to contain both cyclized (70–80%) and uncyclized units, whereas the radical polymer consisted of more than 96% cyclized units. The benzene-soluble fraction of the cationically obtained polymer softened at temperatures below 150°C, but the insoluble fraction decomposed at 240°C. The radical polymers were stable up to 250–280°C (dec).     

Synthesis and characterization of soluble conjugated polymers having pyrene moiety in the main chain

Three new alternating conjugated polymers consisting of pyrene and 3‐dodecylthiophene ( PPyMT ), 4,4′‐didodecyl‐2,2′‐bithiophene ( PPyBT ), or 9,9‐didodecylfluorene ( PPyFlu ) moieties have been prepared using Suzuki coupling reaction or Sugimoto approaches. The polymers were readily soluble in common organic solvents and exhibited good thermal stability in nitrogen and air atmospheres. The structures and optical properties of the polymers were characterized by NMR, FTIR, XRD, UV–vis, and fluorescence spectroscopy. PPyMT and PPYBT showed blue‐light emission in solution, whereas PPyFlu performed blue‐light emitting in film state. The polymers exhibited an intermolecular aggregation and structural ordering due to pyrene–pyrene π–π stacking interaction. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

富勒烯功能高分子材料的制备与性能研究

对富勒烯功能高分子材料的制备、表征及其性能研究已成为光前国际上的前沿领域之一。从合成角度考虑,以不同的方法对Ｃ６０进行高分子修饰可得到结构、性质各异的富勒烯高分子衍生物,对于研究如何更好地控制Ｃ６０高分子衍生物的结构,探讨了有Ｃ６０参与的聚合反应的机理以及Ｃ６０在高分子衍生物中的作用无疑是很有帮助的。从应用角度考虑,Ｃ６０引入高分子中必将导致新型聚合物的产生。这些新型聚合物表现出许多独特而极具应用     

Photocrosslinkable polymers having p-phenylenediacrylate group in the side chain: Argon laser photoresist

Preparative methods and photosensitivity characteristics of polymers bearing the p-phenylene-diacrylate (PDA) group are described. Condensation of a copolymer of methyl methacrylate and glycidyl methacrylate with p-phenylenediacrylic acid monoester gave highly photosensitive polymers. An alternative method to introduce PDA group is the substitution of chloromethyl-styrene polymer with p-phenylenediacrylic acid monoester monoalkali salt. The latter method was found to be more favorable for preparing soluble photosensitive polymers. The polymers thus prepared showed high sensitivity to light of 488 nm from an Argon laser when sensitizers are used, and the photocrosslinking quantum efficiency was 0.44. Preliminary results on holographic recording with this polymer is also mentioned.     

Syntheses and optoelectronic properties of quinoxaline polymers: The effect of donor unit

Tuning the bandgap of electrochromic polymers is one of the important research topics in electrochromism. To understand clearly the effect of donor unit in donor–acceptor–donor‐type polymers, 2,3‐bis(4‐tert‐butylphenyl)‐5,8‐di(thiophen‐2‐yl)quinoxaline and 2,3‐bis(4‐tert‐butylphenyl)‐5‐(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐ 5‐yl)‐8‐(thiophen‐2‐yl)quinoxaline were synthesized and polymerized potentiodynamically. Their electrochemical and spectroelectrochemical studies were performed, and the results were compared with those of poly(2,3‐bis(4‐tert‐butylphenyl)‐5,8‐bis(2,3‐dihydrothieno[3,4‐b][1,4]dioxin‐5‐yl)quinoxaline) (Gunbas et al., Adv Mater 2008, 20, 691–695). A blue shift in the polymer π–π* transitions revealed that the bandgap of such polymers with the same acceptor unit is related to the electron density of donor units. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Quantum amplified isomerization in polymers based on triplet chain reactions

Photoinitiated triplet quantum amplified isomerizations (QAI) of substituted Dewar benzene derivatives in polymeric media are reported. The quantum efficiencies and the ultimate extents of reactant-to-product conversions increase significantly with the incorporation of appropriate co-sensitizers; compounds whose triplet energies are similar to or lower than that of the sensitizer and close to that of the reactant. These co-sensitizers serve to promote chain-propagating energy transfer processes and thereby increase the action sphere of photosensitization. Isomerization quantum yields increase, as predicted, with increasing concentrations of the reactants and the co-sensitizers. Chain amplifications as large as approximately 16 and extents of conversion that approach 100% have been achieved. Mechanistic schemes are proposed to account for the dynamics of the inherent energy transfer processes and provide a predictively useful model for the design of a new class of photoresponsive polymers based on changes in the refractive index of the materials.     

Syntheses and structures of three zinc coordination polymers with 1-D zigzag chain,double chain,and triple chain

Three new coordination polymers [Zn(btp)(NCS)₂] _n (1), {[Zn(btp)₂(dca)₂] _n (2), and {[Zn(btp)₃](BF₄)₂} _n (3) (btp = 1,3-bis(1,2,4-triazol-1-yl)propane, dca = dicyanamide) were synthesized and characterized. In 1, 2, and 3, one-, double-, triple-btp ligands link two Zn(II) atoms and extend to form a 1-D zigzag chain for 1, 1-D double chain for 2, and 1-D triple chain for 3. The conformations of the btp ligands in 1, 2, and 3 are analyzed. 1, 2, and 3 have emission maxima at approximately 405, 407, and 409 nm, respectively, in the solid state at room temperature.